Search

A lignin-based PU coating was prepared for paper-based green packaging. Two representative diisocyanate were used to prepare the coatings. Due to the rigid aromatic, the physical properties of the TDI system reached the maximum below the lignin content of 40%. The HDI that contains flexible aliphatic chains alleviated the brittleness of coating, and it showed physical advantages when the lignin content was more than 50%. Owing to the high lignin content, the coating presented enhanced thermal stability. After coated with the lignin-based PU coatings, the dry tensile strength of coated paper was improved by 126%. Amazingly, the wet strength was increased from 0.31 to 12.6 MPa with an improvement nearly 40 times. Based on the coordination of lignin, Ag+ was introduced into the PU matrix, which imparted the coating with excellent antibacterial ability. The colony forming units of E. coli and S. aureus were both less than 1. However, no inhibition halo was observed, which indicated that the Ag was firmly anchored on the coating and the antibacterial ability is only available when the bacterial contact the coating surface. The lignin-based PU coating with favorable sustainability and properties shows great potential in paper-based green packaging fields. The prepared PU coating with high lignin content and firmly anchored Ag+ exhibits outstanding physical properties, thermal stability, and antibacterial property, which makes it an ideal candidate to be used in paper-based green packaging. [Display omitted] [ABSTRACT FROM AUTHOR]

Lining of canvases and paper artworks is a diffused conservation methodology developed to ensure the safe and long-term preservation of weakened supports. Lining systems are generally constituted by a new supporting material or a package of new materials glued to the original artefact. This paper reports on the study of the mechanical behaviour of four multi-layered paper and canvas composites, proposed as lining systems for a large drawing on paper: the "School of Athens" by Raffaello Sanzio, dated 1508. This masterpiece is the 1:1 preparatory cartoon for the wall-painting in the Vatican rooms. Uniaxial tensile testing has been employed in this study to characterize both the single layer materials and the overall mechanical behaviour of the composites. The mechanical tests have been performed before and after artificial ageing with high humidity regime. The complex testing protocol allowed selecting the best performing composite for the final lining, and to assess a safety threshold in terms of stress value for the framing and display of the restored artwork in the new showcase. The results constitute a quantitative evaluation of the different systems, and therefore they can effectively support the conservators' activity and methodological choices. [ABSTRACT FROM AUTHOR]

Nowadays, the dependence on synthetic plastic-based materials for the preservation and transport of different types of products is very high, leading to major environmental and human health concerns, which highlights the importance of investigating sustainable options. Paper is a widely used bio-based material for packaging however, the development of newer and straightforward approaches to produce paper-based materials with increased functionalities and performance is still highly desired. In this work, we report the use of a bio-based photopolymerizable coating formulation, composed of tung oil, and using Darocur 1173 as photoinitiator, to develop functional papers with hydrophobic and improved water barrier properties, without compromising other properties. Coated paper samples were prepared, using different irradiation times (0, 15, 30, 60, and 300 s), to study the effect of this parameter on the properties of the coated papers. The ensuing coated papers presented pick-up values between 6 and 7 g/m2. Their hydrophobicity was significantly improved as evidenced by the increase in the contact angle values from about 71° to 127° and the significant decrease in the water absorption, measured by the Cobb test, from 108 down to 17 g/m2, upon a curing time of only 15 s. Furthermore, with this time of curing, the optical (viz. whiteness, brightness, and opacity) and mechanical properties (viz. tensile and burst strength) of paper were not affected. These results highlight the great potential of tung oil photopolymerizable coating formulations as a simple and promising alternative for the fabrication of more sustainable and functional paper packaging materials. [Display omitted] • Photopolymerizable bio-based coating for paper-based packaging materials • The obtained coatings confer high hydrophobicity to paper. • Papers with improved air barrier and mechanical properties were obtained. • Optimized curing time (15 s) compatible with manufacturing constraints [ABSTRACT FROM AUTHOR]

[Display omitted] • Novel dimer acid-based waterborne polyurethanes (DWPUs) were designed and prepared. • DWPUs were first used as multifunctional coatings for paper substrates. • Papers coated by DWPUs exhibited excellent water- and oil-resistances. • Alkyl and uniform membrane of DWPUs are critical to improve papers' properties. Paper derived from lignocellulose has great advantages over plastics as packaging material, nevertheless, the poor water- and oil-resistances of paper-derived products limited their application in high-end field. Herein, novel dimer acid-based waterborne polyurethanes (DWPUs) with different content of dimer acid-based polyester polyol (DG) were prepared and used as water- and oil-resistant coating for paper substrate. The effects of DG contents on water- and oil-resistances, mechanical properties and thermal stability of DWPUs coated papers were systematically investigated. When the content of DG reached up to 7 wt% (based on polyester glycol), the paper coated by DWPU exhibited 88.06% decrease in Cobb 60 value, 8.7 times increase in kit rating compared with uncoated paper. Meanwhile, DWPUs coated papers showed good mechanical properties and thermal stability. These improvements are attributed to the flexible long-alkyl chain, and six-ring structure of DWPUs as well as the continuous and homogeneous DWPU-derived membrane on the surface of paper. This study provides a new framework for the preparation of high quality, multifunctional, environmentally friendly water- and oil-resistant coatings for paper substrates. [ABSTRACT FROM AUTHOR]

Paper-based packaging generally has poor performances in the gas/oil barriers. This work reports a paper-based packaging material prepared via the modification of conventional papers with TEMPO-oxidized cellulose nanofibers (TOCN)/cationic guar gum (CGG) hydrogel film. Specifically, the hydrogel film modification was realized through a layer-by-layer deposition on paper. The hydrogel film modification significantly improved the mechanical and barrier properties of the paper. Specifically, the 4-layer hydrogel film modified paper showed a tensile strength of 34.03 MPa and a burst strength of 510 kPa, respectively. In contrast, the unmodified paper exhibited a tensile strength of 26.78 MPa and a bursting strength of 388 kPa. The packaging performance of this TOCN/CGG hydrogel film modified paper was demonstrated via the fresh mooncake packaging test. Such hydrogel film not only provided the oil resistance, but also maintained the mooncake's freshness. This material can serve as a green and sustainable food packaging. [Display omitted] • A TOCN/CGG self-assembled hydrogel film modified paper reported • A 27% increase in tensile strength with the 4-layer hydrogel film modification • A kit number of 11 with the 4-layer hydrogel film modification • Freshness retention of mooncakes observed as packaged with modified paper [ABSTRACT FROM AUTHOR]

• Multidisciplinary evaluation of three novel perennial crops as feedstock for the pulp and paper industry. • Meadow hay blends generated higher tensile indices compared to the pure birch control. • Fibre lengths of 0.5 (meadow hay), 1.3 (Virginia mallow), and 0.9 mm (cup plant) were measured. • The fibre widths of cup plant and Virginia mallow are broader compared to hardwoods. • These promising raw materials will be valueable in cardboard production for sustainable packaging. While the demand for paper and packaging material is increasing, industry and consumers are searching for more sustainable raw materials. This study evaluates three non-wood perennials to find alternative raw materials for the paper and pulp industry. Meadow hay, cup plant (Silphium perfoliatum L.) and Virginia mallow (Sida hermaphrodita (L.) Rusby) are attracting attention as potential raw materials for the bioeconomy due to biodiversity benefits, low fertilizer requirements as well as high yields. For the first time a detailed view on their fibre morphology and use as paper feedstock is given. After three different mechanical grinding methods, the plant material was screened, pulped in NaOH and beaten in a PFI mill. Birch fibre has been chosen as short-fibre control and blend base. Hand-sheets with different pulp blends of birch and one of the three raw materials were made, and paper properties were measured. For meadow hay, Virginia mallow and cup plant fibre lengths of 0.5, 1.3, and 0.9 mm were measured. Therefore, all perennial plant materials have comparable fibre lengths to hardwoods. Meadow hay blends with birch pulp percentages of 50 % and 75 % generated higher paper strength compared to the pure birch paper at a beating intensity of 5000 revolutions (PFI). The paper strength of cup plant and Virginia mallow blends is comparable to the strength of the birch control. Due to these promising results, all analyzed raw materials could find their application, especially in the growing area of sustainable packaging materials. [ABSTRACT FROM AUTHOR]

• Cellulose-based solutions can improve environmental performance of food packaging. • Food products require specific barrier functions from cellulose-based packaging. • Eco-design enables quantifying environmental performance and identifying trade-offs. • Fulfilling the barrier requirements for food product packaging is crucial. This short communication describes the climate change impacts of using cellulose, and more precisely cellulosic fiber-based materials, in food packaging, representing current and emerging industrial state of the art technology, without specific reference to current scientific advances. First, the different types of cellulosic fiber-based packaging materials, which can be used to replace fossil-based packaging materials, are presented for flexible and rigid applications. The focus is on technological solutions with packaging properties that enable the protection of commonly sold food products. The manufacturing processes associated with these cellulosic fiber-based materials is described and the environmental impact assessment of 4 selected case studies presented: stand-up pouches, flexible flow wraps, frozen or chilled food trays, and molded pulp lids. A simplified eco-design Life Cycle Assessment (LCA) was then performed to compare each solution with its fossil-based counterpart. Differences and similarities between the various cellulosic solutions have been identified. Furthermore, the assessment confirms that cellulosic fiber-based materials have reduced environmental impacts as compared to fossil-based counterparts, if a similar packaging weight is obtained. Indeed, all impacts of plastics are between 3 and 5 kg CO 2 eq/kg, while all impacts of cellulosic fiber-based materials are below 1.5 kg CO 2 eq/kg. [ABSTRACT FROM AUTHOR]