Search

Arsenic (As) is among the most dangerous metalloids and is harmful to human wellbeing. In this laboratory study, Al(III)-modified kapok fibres (Al-Kapok) were used to remove As(V) from water. The sorbent was characterised using Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) combined with energy-dispersive X-ray spectroscopy (EDX). Batch experiments were performed to observe the performance of Al-Kapok in the removal of As(V) and to examine the effects of pH, temperature, adsorbent dose, and coexisting ions on the adsorption process. The surface of the sorbent changed after aluminium modification, and the results of the batch experiments showed that the adsorption of As(V) occurred mainly via endothermic-spontaneous chemisorption at the solution and solid interface of Al-Kapok. The As(V) removal efficiency was approximately 76%–84%, and it was slightly affected at pH levels below 8.0. Further study showed that the maximum adsorption capacity of Al-Kapok for As(V) was 118 μg/g at 30 °C and pH 6, and notable adverse effects were caused by the presence of SO 4 2 − and PO 4 3 − . It was also found that the boundary layer and film diffusion contributed more to As(V) adsorption. After five adsorption/desorption cycles, regeneration recovered approximately 92% of the adsorption capacity of Al-Kapok used. Overall, Al-Kapok appears to be a suitable adsorbent material for the purification of As-contaminated water. [Display omitted] • The adsorption of As(V) on the Al-Kapok is slightly affected by pH at pHs below 8.0 • As(V) adsorption is mainly a chemical process and inhibited by multi-valent anions. • Boundary layer and film diffusion shows more contribution to the adsorption of As(V). • 92% of the Al-Kapok's adsorption capacity could be recovered through regeneration. [ABSTRACT FROM AUTHOR]