Search

The design of shallow foundations typically proceeds by using the load and resistance factor design (LRFD) methodology to avoid various limit states with some probability. This paper looks at the sliding limit state of shallow foundations, and the sliding resistance factors required for the LRFD approach are estimated using reliability analyses of surface strip foundations. Cohesive and frictional soils are separately studied under wind loading conditions. Monte Carlo simulations are used to estimate the sliding failure probability of foundation designs on cohesive soils, and an analytical method is developed for frictional soils. The results indicate the existence of a "worst case" correlation length for cohesive soils, and the sliding resistance factor required to achieve target maximum lifetime failure probabilities is around 0.4–0.65 for moderate soil variability. For frictional soils, the required sliding resistance factor is about 0.5–0.85 for νϕ′ = 0.15. Overall, the sliding resistance factors recommended here agree well with the resistance factors of ϕgu = 0.6 for cohesive soils and ϕgu = 0.8 for frictional soils stipulated by geotechnical LRFD code provisions in Canada. The analyses can be used to estimate the reliability of current designs and can also aid the calibration of geotechnical design codes. [ABSTRACT FROM AUTHOR]

Wind turbines are typically designed based on fatigue and serviceability limit states, but still require an accurate assessment of bearing capacity. Overconsolidated clay deposits in Canada often have a thin layer of crust with a relatively high undrained shear strength developed from weathering, desiccation, and geochemical processes. However, existing design methods only assess the bearing capacity using effective area and inclination factor without consideration of surficial crusts. This paper studies the undrained VHMT (vertical, horizontal, moment, and torsional) failure envelope of circular foundations founded on a surficial crust underlain by a uniform soil with a zero-tension interface condition using finite element analysis. An analytical expression for the VHMT failure envelope is derived. [ABSTRACT FROM AUTHOR]

The next edition of the Canadian Highway Bridge Design Code will contain a table of geotechnical resistance factors to be used for seismic design. This paper will estimate the geotechnical resistance factors for shallow foundations required to achieve various target maximum acceptable failure probabilities, which in turn may depend on the assumed design earthquake return period. The investigation will include consideration of design lifetime, uncertainty in the magnitude of the maximum lifetime earthquake event, and the uncertainty in ground properties. The results suggest resistance factors that are lower than commonly used at the moment in Canada and that the failure probability is not greatly dependent on the return period of the design earthquake. The paper will present recommendations on geotechnical resistance factors for seismic design that can be used to guide and calibrate future editions of civil design codes in Canada. [ABSTRACT FROM AUTHOR]