Search

Wood discoloration was investigated in 721 paper birch (Betula papyrifera Marsh.) trees from 146 sites across the managed forest of Quebec, Canada. Discoloration was present at breast height in 85% of trees, but its impact was limited in terms of tree basal area and volume, with proportions of 6.4% and 3.6%, respectively. These two measures were strongly correlated. Discoloration changed wood appearance but had no effect on microfibril angle and modulus of elasticity. Discolored wood was nevertheless denser, probably due to the accumulation of colored extractives. Predictive models were also developed and applied to 415 711 paper birch trees from 51 689 inventory plots across the province to study regional variation. Higher proportions of discolored basal area were obtained in the southwestern areas of the province where the climate is warmer and drier. In these areas, paper birch trees are larger and, likely, support bigger branches which can cause larger columns of discoloration when broken. Lower proportions were found in eastern regions where snowfall is more abundant. Smaller, more flexible branches in trees growing in these areas could explain this result. This study confirms the feasibility of large-scale mapping of wood discoloration in standing trees based on forest inventory and climate data. [ABSTRACT FROM AUTHOR]

Forests are the locus of conflict in Canada, where the rights and interests of Indigenous peoples can collide with those of the province (Crown) and the forest industry. Efforts to achieve "forest justice" — or sufficient forest rights to meet the self-governance goals of Indigenous peoples, and in ways that ensure collective resilience — have typically been driven by the principle of reconciliation. In this paper, these "forest justice" efforts were examined through a tripartite justice theory, involving recognition, representation, and redistribution pathways. This paper documents that recognition involves Crown efforts to recognize Indigenous peoples' forest rights, including ownership, and access and use rights; representation includes improved participation in forest governance; and redistribution covers the allocation of timber harvesting rights and forest lands to Indigenous peoples. This study documents that the bulk of "forest justice" activity is focused on the redistribution of timber harvesting licences, the volume of which has doubled over the last two decades. These three paths to justice must all be pursued together to deliver "forest justice", and to move towards "reconciliation in the woods". Recommendations are offered to support forest justice in practice. [ABSTRACT FROM AUTHOR]

Ecological forestry is based on the idea that forest patterns and processes are more likely to persist if harvest strategies produce stand structures, return intervals, and severities similar to those from natural disturbances. Taylor et al. (2020) reviewed forest natural disturbance regimes in Nova Scotia, Canada, to support implementation of ecological forestry. In this follow-up paper, we (i) review the use of natural disturbance regimes to determine target harvest rotations, age structures, and residual stand structures; and (ii) describe a novel approach for use of natural disturbance regimes in ecological forestry developed for Nova Scotia. Most examples of ecological forestry consider only the local, dominant disturbance agent, such as fire in boreal regions. Our approach included: (i) using current ecological land classification to map potential natural vegetation (PNV) community types; (ii) determining cumulative natural disturbance effects of all major disturbances, in our case fire, hurricanes, windstorm, and insect outbreaks for each PNV; and (iii) using natural disturbance regime parameters to derive guidelines for ecological forestry for each PNV. We analyzed disturbance occurrence and return intervals based on low, moderate, and high severity classes (<30, 30–60, and >60% of biomass of living trees killed, respectively), which were used to determine mean annual disturbance rates by severity class. Return intervals were used to infer target stand age-class distributions for high, moderate, and low severity disturbances for each PNV. The range of variation in rates of high severity disturbances among PNVs was from 0.28%·year–1 in Tolerant Hardwood to 2.1%·year–1 in the Highland Fir PNV, equating to return intervals of 357 years in Tolerant Hardwood to 48 years in Highland Fir PNVs. As an example, this return interval for the Tolerant Hardwood PNV resulted in target rotation lengths of 200 years for 35% of the PNV area, 500 years for 40%, and 1000 years for 25%. The proposed approach of determining natural disturbance regimes for PNV communities and calculating target disturbance rates and corresponding harvest rotation lengths or entry times appears to be a feasible method to guide ecological forestry in any region with a strong ecological land classification system and multiple disturbance agents. [ABSTRACT FROM AUTHOR]

In recent years, increasing attention has been drawn to improving productivity in logging passages while reducing negative impact on soil and water. The position of landings and extraction routes is crucial in these efforts, as it has a huge impact on efficient and sustainable forwarder passages. In this paper, we propose a two-phase approach to identify the best possible landing locations integrated with log extraction route design. The first phase identifies potential landing zones adjacent to forest roads. It considers practical restrictions such as slopes, stoniness, and closeness to infrastructure. The second phase uses an optimization model to evaluate the potential impact of each zone and aggregate zones, selecting one or two complete landings. This model is a relaxation of a formulation for an extraction route design; it is used to minimize a weighted objective of the total driving distance, avoid steep terrains and impact on soil and water. The proposed approach has been tested on a set of harvest areas in southern Sweden. The results not only show the potential to identify feasible landing zones but also identify a shorter driving distance and hence lower contractual cost with optimized positioning. The possibility to increase efficiency in forest operations by performing scenario analysis and thus forwarding distances with different landing sites is among the results. [ABSTRACT FROM AUTHOR]

Climate-smart forestry (CSF) is considered a promising approach for climate change adaptation and mitigation strategies, as highlighted in several European policy documents. This paper describes a prospective approach to introducing an incentive-based scheme to facilitate the implementation of CSF through a case study in Iceland. It is argued that the payments for ecosystem services (PES) scheme allows for effective CSF management and long-term sustainability if introduced in compliance with local, cultural, and social values. In a case study of an Icelandic afforestation programme, we conducted an institutional analysis of the PES scheme and assessed its effect on the sustainable provision of forest ecosystem services for the long term. We provide preliminary findings on the application of CSF in the 30-year-old Icelandic afforestation programme scheme. The perspectives of forest and policy experts, as well as local farmers participating in the scheme, were crucial for assessing the effectiveness of PES scheme performance in Iceland. [ABSTRACT FROM AUTHOR]

Rehabilitation of cutover stands is often a management objective of landowners who desire improved stand conditions and increased value from future harvest revenues. We evaluated crop tree growth response and quality following precommercial rehabilitation treatments in mixedwood stands degraded through repeated exploitive cutting in Maine, USA. Treatments included control (no rehabilitation), moderate rehabilitation (crop tree release), and intensive rehabilitation (crop tree release plus timber stand improvement). Paper birch (Betula papyrifera Marsh.), red spruce (Picea rubens Sarg.), and eastern hemlock (Tsuga canadensis (L.) Carriere) crop tree diameter increments 0 to 9 years after treatment were greater following rehabilitation than in the control. Diameter increment did not differ between intensities of rehabilitation for any species. For conifers in the lower strata, crop tree height growth and change in crown length were negatively correlated with basal area in larger trees. The occurrence of epicormic branches on paper birches was greater in the rehabilitation treatments than the control. However, most epicormic branches occurred above the height corresponding to the first sawlog. These findings indicate that rehabilitation of mixedwood stands with similar characteristics can result in improved growth of crop trees without jeopardizing the quality of the lower bole in paper birches. [ABSTRACT FROM AUTHOR]

This paper describes the development and implementation of a model to measure and compare transaction costs in situations of multiple land use, where interdependence prevails between the agents — thus actions of one agent affects others. Transaction costs typically occur in situations where limited resources are used by more than one agent and bargaining of the use is conducted to mitigate conflict. The model of the paper is empirically tested on one such situation: forestry and reindeer husbandry, which is pursued in northern Sweden where transaction costs occur in common land use as a result of consultations. The results indicate that transaction costs are unevenly distributed between the two agents, where reindeer husbandry carries the highest costs, resulting in uneven power relations. Transaction costs are driven by the presence of Land Use Plans of reindeer husbandry, interestingly enough driving the costs in different directions for the two agents. The model illustrates the elements of transaction costs in a common pool resource situation, and the results are not only useful for this specific situation in policymaking, but also for other similar situations. [ABSTRACT FROM AUTHOR]

Sustaining the structure, function, and services provided by forest ecosystems in the face of changing climate and disturbance regimes represents a grand challenge for forest managers and policy makers. To address this challenge, a range of adaptation approaches have been proposed centered on conferring ecosystem resilience and adaptive capacity; however, considerable uncertainty exists regarding how to translate these broad and often theoretical adaptation frameworks to on-the-ground practice. Complicating this issue has been movement away, in some cases, from other recent advances in forest management, namely ecological silviculture strategies that often focus on restoration. In this paper, we highlight the areas of compatibility and conflict between these two frameworks by reviewing the four principles of ecological silviculture (continuity, complexity and diversity, timing, and context) from the perspective of global change adaptation. We conclude that given many commonalities between the outcomes of ecological silviculture and conditions conferring adaptive capacity, the four principles remain a relevant starting point for guiding operationalization of often theoretical adaptation strategies. [ABSTRACT FROM AUTHOR]

Traditionally, forest management has focused on forestry-related practices whereas other industries have been managed separately. Forest management requires the integration of all natural resource development activities, along with other anthropogenic and natural forest disturbances (e.g., climate change, pollution, wildfire, pest disturbance) to understand how human activities can change forested ecosystems. The term cumulative effects has been used to describe these attempts to integrate all disturbances to develop an understanding of past, current, and future impacts on environmental, social, and economic components of the system. In this review, we focus on the science required to understand the past, current, and future impacts of the cumulative effects of anthropogenic and natural disturbances on forested ecosystems or their components. We have primarily focused on the terrestrial system with an emphasis on northern forests in Canada. Our paper is not intended to be a comprehensive review of all cumulative effects science but a synthesis of the challenges and approaches currently being used. Central repositories were identified as an approach to deal with issues of availability of remotely sensed data on anthropogenic and natural disturbances. Data integration projects, open data, and well-designed large-scale data collection efforts are needed to provide sufficient data on environmental responses to cumulative effects. As well, large-scale integrated, modularized ecosystem models are needed to bring stressor and environmental response data together to explore responses to, and interactions between, multiple stressors to project these effects into the future and to identify future data collection needs. [ABSTRACT FROM AUTHOR]

Wood density, an important parameter for evaluating forest biomass productivity and wood product quality control, is influenced by a complex combination of variables of forest plantations, including environmental conditions and the management practices adopted. In this paper, we demonstrate that three site variables (annual rainfall, temperature, and soil texture) and 10 plantation variables (e.g., age and genetic material) are associated with basic wood density (evaluated in two situations: with and without bark) in 936 trees of different species of Eucalyptus L'Hér across five distinct edaphoclimatic regions in Brazil. A canonical correlation analysis was used to identify the most contributory variables affecting wood density. The variables globally associated with high basic wood densities were, in order of importance, the genetic material and area per tree (both under direct control of plantation managers), as well as mean annual temperature and soil texture of the site. These results confirmed the advantage of using clonal material (instead of seedling origin material) planted in larger spacings in sites with higher mean annual temperatures and clayey soils to obtain higher basic wood densities. Conversely, low basic wood densities were associated with high-productivity sites, higher rainfall, and plantations with a higher basal area per stem in second rotation. [ABSTRACT FROM AUTHOR]

The increased pressure on timber supply due to a reduced forest land base urges the development of new approaches to fully capture the value of forest products. This paper investigates the effects of knowing the position of knots on lumber volume, value, and grade recoveries in curve sawing of 31 white spruce (Picea glauca (Moench) Voss) and 22 jack pine (Pinus banksiana Lamb.) trees. Internal knot position was evidenced by X-ray computed tomography (CT) imaging, followed by the application of a knot-detection algorithm allowing log reconstruction for use as input in the Optitek sawing simulation software. Comparisons of the three levels of sawing optimization (sweep up, shape optimized, and knot optimized) revealed that considering internal knots before log sawing (e.g., knot optimized) generated 23% more lumber value for jack pine and 15% more for white spruce compared with the traditional sweep-up sawing strategy. In terms of lumber quality, the knot-optimized strategy produced 38% more pieces of grade No. 2 and better in jack pine and 15% more such pieces in white spruce compared with the sweep-up strategy. These results indicate a great potential to increase manufacturing efficiency and profitability by implementing the CT scanning technology, which should aid in developing a strong bioeconomy based on an optimized use of wood. [ABSTRACT FROM AUTHOR]

Do fast-growing trees produce lower density wood? To determine the relationship between growth rate and wood density in plantation-grown aspen (Populus tremuloides Michx.), 199 trees in 20 clones were sampled from a 15-year-old clonal trial. This study found no evidence that fast-grown trees produce less dense wood. Phenotypic and genetic correlations between height, diameter, volume, and biomass were all high and significant. Wood density was not correlated with height or volume, but there were small and significant (p ≤ 0.05) positive phenotypic correlations with stem diameter. Genetic correlations between breast-height wood density and all three growth measures (height, DBH, and volume) were not significantly different from zero. This suggests that selection for growth will not influence wood density and vice versa. This paper discusses some possible reasons for the contradictions in the literature about the relationship between growth rate and wood density in aspen. The anatomy of juvenile or core wood is different from that of mature wood, and the relationship between density and growth rate also differs. The changing relative proportion of juvenile core wood with tree size may explain many of the apparent contradictions. [ABSTRACT FROM AUTHOR]

Public advisory committees (PACs) are a dominant form of public participation in Canada's Crown forests, providing a venue in which members of the local public can engage and influence sustainable forest management decision-making. In this paper, we examine the experiences of Indigenous participants (relative to non-Indigenous participants) concerning the success of PAC processes. We focus on issues of fairness, equity, and inclusion of Indigenous voices along with an assessment of forest values diversity. Findings from surveys in 2004 and 2016 indicate statistically significant differences between Indigenous and non-Indigenous PAC members regarding their forest values and their evaluation of the success of PAC processes. This work draws attention to the relative experiences of survey participants and the identification of persistent challenges associated with public engagement over the last two decades. Policy recommendations include substantial changes to how we define and measure sustainable forest management in Canada. [ABSTRACT FROM AUTHOR]

Contemporary fire regimes of Canadian forests have been well documented based on forest fire records between the late 1950s to 1990s. Due to known limitations of fire datasets, an analysis of changes in fire-regime characteristics could not be easily undertaken. This paper presents fire-regime trends nationally and within two zonation systems, the homogeneous fire-regime zones and ecozones, for two time periods, 1959–2015 and 1980–2015. Nationally, trends in both area burned and number of large fires (≥200 ha) have increased significantly since 1959, which might be due to increases in lightning-caused fires. Human-caused fires, in contrast, have shown a decline. Results suggest that large fires have been getting larger over the last 57 years and that the fire season has been starting approximately one week earlier and ending one week later. At the regional level, trends in fire regimes are variable across the country, with fewer significant trends. Area burned, number of large fires, and lightning-caused fires are increasing in most of western Canada, whereas human-caused fires are either stable or declining throughout the country. Overall, Canadian forests appear to have been engaged in a trajectory towards more active fire regimes over the last half century. [ABSTRACT FROM AUTHOR]

The challenges faced recently by the North American forest products industry have forced it to review many of its key operations. Implementing logistics centers for such a context may therefore help in allocating the wood fibre more efficiently and in reducing sorting and transportation costs. This paper aims to better understand the interaction between a forest logistics center and a complex forest network while exploring the business environment favoring the use of such a structure. A profit maximization model is proposed and applied to a real case in the Mauricie region in Quebec, Canada. A total of 18 groups of scenarios are tested, based on the use of a sort yard and of backhauling. Results show that a logistics center already in operation adds $0.52 in profits for each cubic metre of wood available for harvest (over 2 580 411 m3 per year) for the network under study ($1.4 million annually). A sensitivity analysis also highlights that higher prices and sorting error rates have the greatest impact on the logistics center's profitability. [ABSTRACT FROM AUTHOR]

Cross-sector collaboration has gained attention from researchers in different fields of science in recent years because it represents significant business potential for forest companies to work with sectors possessing a more positive demand outlook, including those facing increasing pressure to detach from oil derivatives. Despite this, there is a lack of research regarding company-level, cross-sector collaboration in the forest-sector literature. This paper seeks to enhance the understanding of the cross-sector collaboration concept in the forest-sector literature and explore alternatives for forest companies to collaborate with other industries, rather than to compete. A systematic literature review is conducted to explore the relevance of cross-sector collaboration in the forest industry. Furthermore, the main drivers, benefits, and challenges of collaboration in the forest industry are identified. Results show that the literature has emphasized the importance of cross-sector collaboration for forest companies, but little empirical work has been done regarding the link between forest companies and other industrial sectors. Cost reduction, competitiveness, and environmental sustainability are among the principal drivers and benefits. Forest business culture, lack of trust, and lack of parameters to evaluate costs and savings generated are key challenges to forest companies implementing cross-sector collaboration. [ABSTRACT FROM AUTHOR]

Quantifying the age characteristics of a forest can provide valuable information about the forest’s impact on the environment. For instance, the age of a forest can affect the ecosystem’s carbon exchange, soil enzyme activity, and biodiversity. In this paper, we investigate the use of different sampling methods to estimate the age characteristics of three simulated ponderosa pine (Pinus ponderosa Dougl. ex P. Lawson & C. Lawson) forests having different spatial and age patterns. This includes estimating the mean tree age and the age-class distribution of the trees in the forest. The trees in the sample are selected using k-tree sampling, fixed-radius plot sampling, or variable-radius plot sampling, and we compare the properties of the resulting estimators via design-based and model-based approaches. Analyses of the different sampling methods applied to the three forests suggest that the estimator associated with k-tree sampling, with the addition of a few extra trees per plot, is feasible for forests having a spatially mosaic or random spatial pattern. The estimator associated with fixed-radius plot sampling performed well for the forest having a clustered spatial pattern. [ABSTRACT FROM AUTHOR]

In this paper, we present an approach employing multiobjective optimization to support decision making in forest management planning under risk. The primary objectives are biodiversity and timber cash flow, evaluated from two perspectives: the expected value and the value-at-risk (VaR). In addition, the risk level for both the timber cash flow and biodiversity values are included as objectives. With our approach, we highlight the trade-off between the expected value and the VaR, as well as between the VaRs of the two objectives of interest. We employ an interactive method in which a decision maker iteratively provides preference information to find the most preferred management plan and learns about the interdependencies of the objectives at the same time. The method is illustrated with a case study in which biodiversity is assessed through an index calculated from the characteristics of the forest. Uncertainty is included both through modifying the input data according to the accuracy of current inventory methods and through growth model errors. This uncertainty is described using a set of 25 scenarios. Involving multiple components of risk is a highly relevant approach in multiobjective forestry; however, estimation of the uncertainty of biodiversity needs further attention. [ABSTRACT FROM AUTHOR]

The article presents the emerging forest bioeconomy as an integrated, multi-product industrial ecosystem, where the traditional pulp mills allocate the use of side streams to independent biochemical companies manufacturing bioproducts in the vicinity of the pulp mills. Topics include the biochemical benefit from the proximity by receiving wood-based side streams at lower costs, and at the same time, and the pulp mills benefit from having a new source of revenue from selling side streams.

The purpose of the paper is to analyse the extent of policy change and learning in the 20 years following the implementation of Ontario's forest sustainability legislation. Extent of policy learning and change towards sustainable forest management are measured using a combination of content, co-occurrence, and textual analysis of the previous Crown Timber Act and the new Crown Forest Sustainability Act, as well as the latter's 1996 and 2009 forest planning manuals. There were four key findings. First, policy change towards sustainable forest management has been limited. Second, although there was an increased number of values mentioned in new legislation and planning manuals, the frequency of timber values remained dominant. Third, although integration occurred among a greater range of values, integration with timber values continued to dominate. Fourth, with respect to policy learning, the achievement of sustainable forest management is now explicit and judged based on evidence regarding the inclusion of a range of values beyond timber. The paper concludes that the transition to the more integrative and responsive policies of sustainable forest management remains a work in progress. [ABSTRACT FROM AUTHOR]

In this paper, we inquire into whether, and by how much, the use in tactical planning of a dense set versus a sparse set of candidate roads can reduce the two major costs (construction and transportation) of forest operations. This inquiry is conducted by using an optimal road location model to generate dense and sparse sets of candidate roads for three different problem instances. These problem instances were then solved using a mixed integer representation of the integrated tactical planning problem. The results show that the use of a dense set versus a sparse set of candidate roads, for all three problem instances, yielded solutions with a mean decrease in transportation and construction costs of 34.34% and 6.94%, respectively. The mean increase in revenue was 1.06%, and the mean increase in the objective function value (revenue minus the total road construction and transportation costs) was 5.62%. In addition, the mapped solutions reveal the spatial attributes of a lower versus a higher cost road network: straighter roads and more efficiently located forks within the road network. These results were obtained to illustrate how reductions in the costs of transportation and road construction can be achieved in tactical planning. [ABSTRACT FROM AUTHOR]

Studying intra-annual growth dynamics through a modelling approach has proved useful for characterizing differences in wood phenology between species and deviations from the expected tree growth due to climate change. The aim of this paper was to determine the climatic factors and the inter- and intra-specific competition traits that drive intra-annual secondary growth dynamics in three Mediterranean tree species that naturally co-exist in the Spanish Northern Plateau ( Pinus pinea L., Juniperus thurifera L., and Quercus ilex subsp. ballota (Desf.) Samp.). For this purpose, we obtained girth increment data from band dendrometers installed on 58 trees from May 2012 to April 2015. Half of them were located in a high-density plot and half were in a low-density plot. These data were analysed through a nonlinear multifactorial model considering daily and cumulative climatic effects together with inter- and intra-specific competition indices. Our results provide evidence of a spatiotemporal niche separation between species. Compared with other species, Q. ilex subsp. ballota showed a wider thermal amplitude, a higher mean optimum temperature for growth, and a milder effect of drought on its secondary growth. Under current climate change projections, simulations based on our model predict a secondary growth reduction for P. pinea and a growth enhancement for Q. ilex subsp. ballota in these Mediterranean mixtures. [ABSTRACT FROM AUTHOR]

Quebec's forests represent 20% of Canadian forests and 2% of the world forests. Over the entire planet, forests play a major role in habitat preservation and in supplying goods and services to the population. However, climate change will have an impact on the forest through inter alia increased droughts, forest fires, warmer weather, and infestations. In this paper, we analyze the economic impact of climate change on the forest industry in Quebec over a 40-year period using a recursive dynamic computable general equilibrium model. We find that the climate change effects will be relatively weak on most macroeconomic variables as agents adjust their behavior over time and factors are reallocated across sectors. We find that climate change could generate losses in gross domestic product of up to Can$300 million (0.12% of gross domestic product) at the end of a 40-year period for Quebec's economy. However, we find relatively more important effects within the sectors of the forest industry, with losses ranging from 3% to 7.5%. [ABSTRACT FROM AUTHOR]

The Canadian forest industry is facing several challenges including high fibre cost, decline in commodity profitability, and low investment levels at relatively old manufacturing plants. To enable transformation of the industry, innovations are needed to develop value-added products and to shift to an efficient integrated value chain. In this regard, improved logistics for better handling of raw material, forest biomass utilization, and use of new technologies are some promising avenues. In this paper, we propose a generic value chain model that includes locating new sorting yards and biorefineries maximizing the overall profit of the value chain. This integrated planning problem deals with strategic decisions including investments in new facilities and technologies and tactical decisions comprising backhaul transportation and fibre flows across the value chain. To solve such a problem, we developed a mixed integer programming model to design the forest value chain network. This model is used in an industrial case study in the province of Newfoundland, Canada. We have generated and analyzed 32 scenarios evaluated on 12 predefined key performance indicators. The results show that collaboration through backhauling, common terminals, and new assortments are important opportunities to improve the profitability and efficiency of the value chain. The potential improvement over the current situation is as high as 23% considering the aforementioned actions. [ABSTRACT FROM AUTHOR]

The Russian Federation is one of many countries that have signed the Montreal Protocol and Pan-European Forest Process. These initiatives are aimed at harmonizing national forest inventory systems with criteria and indicators for sustainable forest management. In Russia, the classification of forest type is at the heart of national forest inventory systems. For various historical reasons, Russian scientific advancements in the field of forest typology remain little known in the rest of the world. This paper is aimed at addressing this deficiency. Here, we provide an overview of the main trends in the field of forest typology studies in the previous political states of the Russian Empire, the Soviet Union, and the Russian Federation from the end of the nineteenth century to the beginning of the twenty-first century. We detail the principles that formed the basis of the most significant forest type classifications. We also perform similarity and differences analyses comparing approaches used by members of different scientific schools in the field of forest typology. The historical relationship between ecological, phytocoenotic, genetic, and dynamic forest type classifications are discussed as well as the reasons for the prevalence of certain forest type classifications in different regions of Russia. [ABSTRACT FROM AUTHOR]

Some ideas of neuro-dynamic programming (NDP) are illustrated by considering the problem of optimally managing a forest stand under uncertainty. Because reasonable growth models require state information such as height (or age), basal area, and stand diameter, as well as an indicator variable for treatments that have been performed on the stand, they can easily lead to very large state spaces that include continuous variables. Realistic stand management policies include silvicultural options such as pre-commercial and commercial thinning as well as post-harvest treatments. We are interested in problems that are stochastic in their basic growth dynamics, in market prices, and in disturbances, ranging from insects to fire to hurricanes. NDP algorithms are appropriate for problems with large dimensions that may lack a simple model of dynamics and stochastic processes. This paper looks at applying these ideas in the context of a multispecies model. Results show that policies obtained using NDP are optimal within a 95% confidence interval or better. The set of states and controls incorporated into our NDP model allows us to develop optimal policies with a level of detail not typically seen in the forestry literature. [ABSTRACT FROM AUTHOR]

This paper presents a model for optimizing the management of single-species, even-aged stands. The model comprises a number of state variables, given by functions initially differentiable with respect to time, which cease to be due to the discontinuities that cause instant silvicultural treatments. Nevertheless, the proposed model maintains its differentiability with respect to the decision variables (timing, type, and intensity of each thinning, and rotation age). This allows for formulation of the problem of optimal management of this type of stands as a linearly constrained smooth optimization problem, which can be efficiently solved by any derivative-based optimization method. The effectiveness of this formulation is shown by using a sequential quadratic programming (SQP) algorithm to design the optimal management of Pinus pinaster Ait. in Asturias (northwestern Spain) from an economic perspective. These results are compared with those obtained using two methods that do not require derivatives. The SQP, as representative of gradient-type methods, proved robust and much more efficient than the derivative-free methods. [ABSTRACT FROM AUTHOR]

This paper presents a simulation-based analysis of a multiple-round timber combinatorial auction in the timber industry. Currently, most timber auctions are single-unit auctions (i.e., each forest stand is sold separately). However, other types of auctions could be applied to take advantage of the various needs of the bidders with respect to species, volumes, and quality. This study aims to analyze the use of combinatorial auction to this specific context using a simulation approach. Various number of auctions per year, periodicity, lot size, and number of bidders are considered as parameters to set up the different market configurations. The outcomes of both combinatorial auction and single-unit auction are compared with respect to different setup configurations. This analysis shows that combinatorial auction can bring more profit for both seller and buyer when the market is less competitive. [ABSTRACT FROM AUTHOR]

Maritime pine ( Pinus pinaster Aiton) forests in the Aquitaine region, southwestern France, suffered catastrophic damage from storms Martin (1999) and Klaus (2009), and more damage is expected in the future due to forest structural change and climate change. Thus, developing risk assessment methods is one of the keys to finding forest management strategies to reduce future damage. In this paper, we evaluated two approaches to calculate wind damage risk to individual trees using data from different damage data sets from two storm events. Airflow models were coupled either with a mechanistic model (GALES) or a bias-reduced logistic regression model to discriminate between damaged and undamaged trees. The mechanistic approach was found to successfully discriminate the trees for different storms but only in locations with soil conditions similar to where the model parameters were obtained from previous field experiments. The statistical approach successfully discriminated the trees only when applied to similar data as that used for creating the models, but it did not work at an acceptable level for other data sets. One variable, decade of stand establishment, was a significant variable in all statistical models, suggesting that site preparation and tree establishment could be a key factor related to wind damage in this region. [ABSTRACT FROM AUTHOR]

Mexican temperate forests, at the southernmost end of the distribution range of this ecosystem, are the world's centre of diversity of pine and oak, with 55 and 161 species, respectively. Such forests are threatened by land-use change, unsustainable forest management practices, and climate change; these threats reduce their diversity, alter the distribution ranges of species, modify disturbance regimes, and reduce ecosystem adaptability. This paper briefly reviews ( i) the ecology of the Mexican temperate forests, ( ii) the ecological basis for the unique diversity of pine and oak species, ( iii) the main disturbances as well as the main drivers of global changes affecting these forests, in particular climate change, and ( iv) the social, economic, and cultural factors to be considered in proposing a new forest management approach. It proposes a new conceptual framework to manage Mexican temperate forests that are in line with ( i) their natural dynamics, ( ii) the rapidly changing and uncertain global environmental, social, and economic conditions, and ( iii) the complex adaptive system approach. This new forest management combines functional zoning, multispecies plantations, and sylvicultural interventions to increase the adaptive capacity of forests as a way to balance the increasing need for timber products with the need for other ecosystem services facing rapidly changing and uncertain future environmental, social, and economic conditions. [ABSTRACT FROM AUTHOR]

This paper develops a simulation-based optimization supply chain model for supplying sawlogs to a sawmill from a forest management unit. The simulation model integrates the two-way flow of information and materials under the stochastic demand of the sawmill production unit. The dynamic optimization model finds the optimum inventory policy ( s, S) that minimizes the total inventory cost for the three supply chain agents - sawmill storage, merchandizing yard, and forest management unit. The model is used to analyze a real sawmill case study in northwestern Ontario, Canada. It was found that the merchandizing yard absorbs shocks of uncertain demand from the sawmill production unit and reduces idle time, but it increases the total cost of the supply chain by $11 802 (about 42%). The optimized model predicts that only 3.5 days of inventory is required at the sawmill storage. The simulation-based optimization supplier model will help in decision-making at the tactical and operational level in the forest products industry supply chain through a two-way flow of information and materials. [ABSTRACT FROM AUTHOR]

The mountain pine beetle, Dendroctonus ponderosae Hopkins (Coleoptera, Curculionidae), a native insect of North America, periodically reaches population sizes that cause serious economic impact to the forest industry in western North America. The most recent outbreak in British Columbia (BC), Canada, which began in the late 1990s, is only now (2015) abating, after causing unprecedented tree mortality in lodgepole pine ( Pinus contorta Douglas ex. Loudon) forests. In this paper, we make use of permanent research plots to report on the condition of lodgepole pine forests in the Chilcotin Plateau of central BC, which underwent two fully documented mountain pine beetle outbreaks. In this region, the first outbreak started in the late 1970s and lasted until the mid-1980s; the second outbreak began in the early 2000s and ended in 2010. We measured the impacts of these outbreaks in terms of tree mortality and describe the characteristics of the legacies that remain following these outbreaks, including survivors in various canopy layers and levels of existing and new regeneration. We provide evidence in support of the existence of postdisturbance legacies that classify into five distinct stand structure types. Abundant regeneration and surviving intermediate canopy layers in most stands indicate that management actions to restock pine stands in this area will not likely be necessary. The information provided by this study is important for estimating future forest development and timber supply and for forest planning and management. [ABSTRACT FROM AUTHOR]

Urban forest naturalization has gained momentum within municipal planning and non-governmental organizations. As the interest in naturalization increases, so does the impetus for exploring its conceptual and practical dimensions. Naturalization is a form of ecological restoration with prominent social dimensions. One motivation is reintegrating the urban forest to a greater extent into its surroundings, increasing the habitat available for native species. However, naturalization is not always desirable, as we may want to use and modify certain areas for cultural purposes, or feasible, as some species may be unable to establish in an urban setting. This paper examines the concepts underlying naturalization and how they influence naturalization decisions and goals. It then provides a framework for urban forest naturalness and explores potential applications of naturalness assessments in urban forest management. The framework outlines 37 different biotic and abiotic dimensions of naturalness that can help urban forest decision-makers visualize and manage the urban forest through understanding its individual parts and thus the whole. If a site is weak in particular dimensions, actions can be directed to increase the naturalness of these components. Similarly, some dimensions may be of more interest than others, such as increasing habitat suitability for a particular species. We then offer real and hypothetical examples of applying the framework to urban forest management. The benefits of a naturalized urban forest are many. It provides habitat for native species and has an important role as a biological teaching tool for urban residents. In developing this framework, we hope to expand the discussion on naturalization beyond simply planting native species and ceasing mowing to positioning urban forests in a broader landscape. [ABSTRACT FROM AUTHOR]

In many recent studies, the value of forest inventory information in harvest scheduling has been examined. In a previous paper, we demonstrated that making measurement decisions for stands for which the harvest decision is uncertain simultaneously with the harvest decisions may be highly profitable. In that study, the quality of additional measurements was not a decision variable, and the only options were between making no measurements or measuring perfect information. In this study, we introduce data quality into the decision problem, i.e., the decisionmaker can select between making imperfect or perfect measurements. The imperfect information is obtained with a specific scenario tree formulation. Our decision problem includes three types of decisions: harvest decisions, measurement decisions, and decisions about measurement quality. In addition, the timing of the harvests and measurements must be decided. These decisions are evaluated based on two objectives: discounted aggregate income for the planning periods and the end value of the forest at the end of the planning horizon. Solving the bi-objective optimization problem formed using the ε-constraint method showed that imperfect information was mostly sufficient for the harvest timing decisions during the planning horizon but perfect information was required to meet the end-value constraint. The relative importance of the two objectives affects the measurements indirectly by increasing or decreasing the number of certain decisions (i.e., situations in which the optimal decision is identical in all scenarios). [ABSTRACT FROM AUTHOR]

It is acknowledged that natural forest fires cannot and even should not be eliminated from the North American boreal forest. Forest fires produce immediate losses of wood volume, disrupt the conversion of the actual forest age structure into a target structure, and prevent planned timber supply (PTS) levels from being achieved. In this paper, we explore the extent to which periodic shortfalls in available timber under various burn rates can be mitigated through salvage logging and the tolerance of forest managers to a given level of shortfall, both as a function of forest age class structure. Simulations are done using both a deterministic and a stochastic representation of burn rate over time. Results show that the frequency of shortfall events can be reduced by salvage logging and by the introduction of measures that generate a tolerance to shortfall and that this mitigation potential is influenced by initial forest age class structure and burn rate. Results also show that even a 100% rate of salvage logging cannot fully compensate for timber losses to fire and eliminate fire-induced timber shortfalls. Furthermore, interannual burn rate variability reduces the efficiency of both mitigation measures. As the PTS is never realized under fire risk, the real cost of opting for different PTS scenarios should be estimated not from the difference in PTS but rather from the more realistic difference in realized timber harvest. [ABSTRACT FROM AUTHOR]

The uniform angle index (UAI) is used to characterize the spatial distribution of a forest community or of individual tree species within that community. This study presents an empirical assessment of the performance of a new statistical test used in conjunction with the UAI. In this study, the UAI is applied to observed and simulated communities. The effect of plot size and density are examined and the results are compared with the criteria of the aggregation index R of Clark and Evan (CE-R) and Ripley's L function (RL). The results suggest that the UAI performs well in determining a particular class of spatial pattern and that, in contrast to the CE-R index, it is unaffected by population density because the standard deviation can be estimated when the density is known using a new empirical relationship presented in this paper. The results of this study represent an improvement in the development of the UAI, verifying its performance and confirming its overall utility. Our comparative analysis positions the UAI among its historical competitors, the CE-R and RL criteria. The UAI index, which does not require expensive mapping of tree positions, can produce results that are equivalent to those obtained by RL and more robust and reliable than those obtained by CE-R. [ABSTRACT FROM AUTHOR]

The United States Forest Inventory and Analysis (FIA) program has been monitoring national forest resources in the United States for over 80 years; presented here is a synthesis of research applications for FIA data. A review of over 180 publications that directly utilize FIA data is broken down into broad categories of application and further organized by methodologies and niche research areas. The FIA program provides the most comprehensive forest database currently available, with permanent plots distributed across all forested lands and ownerships in the United States and plot histories dating back to the early 1930s. While the data can be incredibly powerful, users need to understand the spatial resolution of ground-based plots and the nature of the FIA plot coordinate system must be applied correctly. As the need for accurate assessments of national forest resources continues to be a global priority, particularly related to carbon dynamics and climate impacts, such national forest inventories will continue to be an important source of information on the status of and trends in these ecosystems. The advantages and limitations of FIA's national forest inventory data are highlighted, and suggestions for further expansion of the FIA program are provided. [ABSTRACT FROM AUTHOR]