Search

Much of current clinical interest has focused on mRNA therapeutics for the treatment of lung-associated diseases, such as infections, genetic disorders, and cancers. However, the safe and efficient delivery of mRNA therapeutics to the lungs, especially to different pulmonary cell types, is still a formidable challenge. In this paper, we proposed a cationic lipid pair (CLP) strategy, which utilized the liver-targeted ionizable lipid and its derived quaternary ammonium lipid as the CLP to improve liver-to-lung tropism of four-component lipid nanoparticles (LNPs) for in vivo mRNA delivery. Interestingly, the structure-activity investigation identified that using liver-targeted ionizable lipids with higher mRNA delivery performance and their derived lipid counterparts is the optimal CLP design for improving lung-targeted mRNA delivery. The CLP strategy was also verified to be universal and suitable for clinically available ionizable lipids such as SM-102 and ALC-0315 to develop lung-targeted LNP delivery systems. Moreover, we demonstrated that CLP-based LNPs were safe and exhibited potent mRNA transfection in pulmonary endothelial and epithelial cells. As a result, we provided a powerful CLP strategy for shifting the mRNA delivery preference of LNPs from the liver to the lungs, exhibiting great potential for broadening the application scenario of mRNA-based therapy.

Mo2C MXene is a two-dimensional material, which can be applied as a co-catalyst to significantly enhance the photocatalytic performance of CdS for H2 production. To understand the effect of the synthesis process of Mo2C MXene nanosheets on the catalytic performance, in this paper, Mo2C MXene was made from Mo2Ga2C by hydrothermal etching in different etchants. Diverse cations (Li+, Na+, K+, or NH4+) in etchants resided on the surface of Mo2C MXene nanosheets. Then, the samples were used to construct CdS/Mo2C-MXene composites for photocatalytic H2 evolution. Among them, Mo2C MXene with Li+ shows the best photocatalytic H2 production rate of 22,048 μmol g–1 h–1 under visible light. The remarkable performance arises from the modification at the nanoscale of Mo2C MXene with Li+, thereby resulting in better photoabsorption behavior, high separation efficiency of photogenerated carriers, and fast charge transfer at the heterointerface. Moreover, the energy band structures explain that the changes of band gap and the position of the conductive band in the photocatalyst tuned by cations are also key to affect photocatalytic activities. [ABSTRACT FROM AUTHOR]

Nanoscaled polymeric materials are increasingly being investigated as pharmaceutical products, drug/gene delivery vectors, or health-monitoring devices. Surface charge is one of the dominant parameters that regulates nanomaterial behavior in vivo. In this paper, we demonstrated how control over chemical synthesis allowed manipulation of nanoparticle surface charge, which in turn greatly influenced the in vivo behavior. Three methacrylate/methacrylamide-based monomers were used to synthesize well-defined hyperbranched polymers (HBP) by reversible addition-fragmentation chain transfer (RAFT) polymerization. Each HBP had a hydrodynamic diameter of approximately 5 nm as determined by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Incorporation of a fluorescent moiety within the polymeric nanoparticles allowed determination of how charge affected the in vivo pharmacokinetic behavior of the nanomaterials and the biological response to them. A direct correlation between surface charge, cellular uptake, and cytotoxicity was observed, with cationic HBPs exhibiting higher cellular uptake and cytotoxicity than their neutral and anionic counterparts. Evaluation of the distribution of the differently charged HBPs within macrophages showed that all HBPs accumulated in the cytoplasm, but cationic HBPs also trafficked to, and accumulated within, the nucleus. Although cationic HBPs caused slight hemolysis, this was generally below accepted levels for in vivo safety. Analysis of pharmacokinetic behavior showed that cationic and anionic HBPs had short blood half-lives of 1.82 ± 0.51 and 2.34 ± 0.93 h respectively, compared with 5.99 ± 2.30 h for neutral HBPs. This was attributed to the fact that positively charged surfaces are more readily covered with opsonin proteins and thus more visible to phagocytic cells. This was supported by in vitro flow cytometric and qualitative live cell imaging studies, which showed that cationic HBPs tended to be taken up by macrophages more effectively and rapidly than neutral and anionic particles.

Zeolites with hierarchical structures are of particular interest because such structures can improve molecular diffusion, particularly that of bulky molecules. N,N,N,N',N',N'-Hexapropylpentanediammonium cations (Pr6-diquat-5), a simple diquaternary ammonium organic structure-directing agent (OSDA), can direct the formation of hierarchically and sequentially intergrown MFI zeolites without employing any mesoporogens. In this paper, the effects of OSDAs having structures similar to Pr6-diquat-5 but different lengths of alkyl spacers and/or different substituting groups on the phase selectivity and morphology of the resulting zeolites are presented. It was revealed that the number of carbon atoms between two charged nitrogens in the OSDAs significantly affected the intergrowth and morphology of the crystals formed. In addition, the propyl-substituted OSDAs were found to be very selective to the formation of MFI zeolite, whereas the butyl-substituted OSDAs were not. For Pr6-diquat-5, the condition for the formation of hierarchically and sequentially intergrown MFI zeolites was somewhat narrow with the optimized molar composition of 1 SiO2:0.2 Pr6-diquat-5:0.375-0.500 KOH:200 H2O:4 EtOH. Defect lines observed on the obtained zeolite crystals by a transmission electron microscope were considered to be connectors for such intergrowths. The unique intergrowth formed by Pr6-diquat-5 was surmised to be due to the unusual fitting of Pr6-diquat-5 inside the channels of MFI zeolite, which was explained by comparing molecular dimensions and stabilization energies of each OSDA. [ABSTRACT FROM AUTHOR]

G-quadruplex (GQ) structures formed from guanine-rich sequences are found throughout the genome and are overrepresented in the promoter regions of some oncogenes, at the telomeric ends of eukaryotic chromosomes, and at the 5′-untranslated regions of mRNA. Interaction of small molecule ligands with GQ DNA is an area of great research interest to develop novel anticancer therapeutics and GQ sensors. In this paper we examine the interactions of TMPyP4, its isomer TMPyP2 (containing N-methyl-2-pyridyl substituents, N-Me-2Py) as well as two metal derivatives ZnTMPyP4 and CuTMPyP4 with GQs formed by dT4G4 and dT4G4T in 100 mM K+ or Na+ conditions. The DNA sequences were chosen to elucidate the effect of the 3′-T on the stabilization effect of porphyrins, binding modes, affinities, and stoichiometries determined via circular dichroism melting studies, UV-vis titrations, continuous variation analysis, and fluorescence studies. Our findings demonstrate that the stabilizing abilities of porphyrins are stronger toward (dT4G4)4 as compared to (dT4G4T)4 (ΔTm is 4.4 vs -6.4 for TMPyP4; 12.7 vs 5.7 for TMPyP2; 16.4 vs 12.1 for ZnTMPyP4; and 1.9 vs -8.4 °C for CuTMPyP4) suggesting that the 3′G-tetrad presents at least one of the binding sites. The binding affinity was determined to be moderate (Ka ∼ 106-107 μM-1) with a typical binding stoichiometry of 1:1 or 2:1 porphyrin-to-GQ. In all studies, ZnTMPyP4 emerged as a ligand superior to TMPyP4. Overall, our work contributes to clearer understanding of interactions between porphyrins and GQ DNA. [ABSTRACT FROM AUTHOR]

This paper studies the wetting properties of seven phosphonium cation-based ionic liquids: trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl) phosphinate [P66614][(iC8)2PO2], trihexyltetradecylphosphonium bis(2-ethylhexyl)phosphate [P66614][BEHP], trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl) imide [P66614][NTf2], tributyltetradecylphosphonium dodecylbenzenesulfonate [P44414][DBS], tributylethylphosphonium diethylphosphate [P4442][DEP], trihexyltetradecylphosphonium dicyanamide [P66614][DCA], and trihexyltetradecylphosphonium chloride [P66614][Cl]. The surface tension was analyzed using the Gibbs free energy in a temperature range of 293-353 K, obtaining the expected linear decrease with temperature rise. The contact angle was measured on four different surfaces (AISI 52100 steel, CrN, TiN, and ZrN) and all liquids with high surface tensions interacting with hydrophobic systems displayed high contact angles as expected. The polarity fraction (PF) and the spreading parameter (SP) were estimated to complete and improve the wetting characterization of these ionic liquids, finding TiN-[P66614][BEHP] and TiN-[P66614][(iC8)2PO2] as the most favorable surface-ionic liquid combinations from a wetting point of view. [ABSTRACT FROM AUTHOR]

Description of the local microscopic structure in ionic liquids (ILs) is a prerequisite to obtain a comprehensive understanding of the influence of the nature of ions on the properties of ILs. The local structure is mainly determined by the spatial arrangement of the nearest neighboring ions. Therefore, the main interaction patterns in ILs, such as cation-anion H-bond-like motifs, cation-cation alkyl tail aggregation, and ring stacking, were considered within the framework of the nearest-neighbor approach with respect to each particular interaction site. We employed classical molecular dynamics (MD) simulations to study in detail the spatial, radial, and orientational relative distribution of ions in a set of imidazolium-based ILs, in which the 1-butyl-3-methylimidazolium (C4mim+) cation is coupled with the acetate (OAc-), chloride (Cl-), tetrafluoroborate (BF4 -), hexafluorophosphate (PF6 -), trifluoromethanesulfonate (TfO-), or bis(trifluoromethanesulfonyl)amide (TFSA-) anion. It was established that several structural properties are strongly anion-specific, while some can be treated as universally applicable to ILs, regardless of the nature of the anion. Namely, strongly basic anions, such as OAc- and Cl-, prefer to be located in the imidazolium ring plane next to the C-H2/4-5 sites. By contrast, the other four bulky and weakly coordinating anions tend to occupy positions above/below the plane. Similarly, the H-bond-like interactions involving the H² site are found to be particularly enhanced in comparison with the ones at H4-5 in the case of asymmetric and/or more basic anions (C4mimOAc, C4mimCl, C4mimTfO, and C4mimTFSA), in accordance with recent spectroscopic and theoretical findings. Other IL-specific details related to the multiple H-bond-like binding and cation stacking issues are also discussed in this paper. The secondary H-bonding of anions with the alkyl hydrogen atoms of cations as well as the cation-cation alkyl chain aggregation turned out to be poorly sensitive to the nature of the anion. [ABSTRACT FROM AUTHOR]

This paper provides spectral characterizations of the two isomers of the 1-methylenepyrene cation, namely, the 1-pyrenemethylium and a pyrene-like isomer owing a tropylium cycle. Both are possible photodissociation products of the 1-methylpyrene cation and were proposed as potential contributors to the diffuse interstellar bands. In that respect, vibrational and electronic spectra are computed for the optimized structures at the density functional theory (DFT) and time-dependent (TD-)DFT levels. Finite temperature effects on these spectra are estimated from molecular dynamics simulations within the density functional-based tight-binding (DFTB) and TD-DFTB frameworks, these methods being first benchmarked against DFT and TD-DFT calculations. The computed spectra allow discrimination of the two isomers. When the temperature increases, bands are observed to redshift and merge. The isomerization mechanism is investigated with the metadynamics technique, a biased dynamics scheme allowing to probe reaction mechanisms with high energy barriers by investigating the free energy surface at various temperatures. Four pathways with similar barrier heights (3.5-4 eV) are found, showing that the interconversion process would only occur in interstellar clouds under photoactivation. The present study opens the way to simulations on larger methyl- and methylenePAHs of astrophysical interest and their experimental investigation. [ABSTRACT FROM AUTHOR]

In this paper, with the example of two different polymorphs of KEu(MoO4)2, the influence of the ordering of the A-cations on the luminescent properties in scheelite related compounds (A',A")n[(B',B")O4]m is investigated. The polymorphs were synthesized using a solid state method. The study confirmed the existence of only two polymorphic forms at annealing temperature range 923-1203 K and ambient pressure: a low temperature anorthic a-phase and a monoclinic high temperature β-phase with an incommensurately modulated structure. The structures of both polymorphs were solved using transmission electron microscopy and refined from synchrotron powder X-ray diffraction data. The monoclinic β-KEu(MoO4)2 has a (3+1)-dimensional incommensurately modulated structure (superspace group I2/b(aβ0)00, a = 5.52645(4) Å, b = 5.28277(4) Å, c = 11.73797(8) Å, γ = 91.2189(4)o, q = 0.56821(2)a*-0.12388(3)b*), whereas the anorthic a-phase is (3+1)-dimensional commensurately modulated (superspace group I1(aβγ)0, a = 5.58727(22) Å, b = 5.29188(18)Å, c = 11.7120(4) Å, a = 90.485(3)o, β = 88.074(3)o, q = 91.0270(23)o, q = 1/2a* + 1/2c*). In both cases the modulation arises due to Eu/K cation ordering at the A site: the formation of a 2-dimensional Eu3+ network is characteristic for the a-phase, while a 3-dimensional Eu3+-framework is observed for the β-phase structure. The luminescent properties of KEu(MoO4)2 samples prepared under different annealing conditions were measured, and the relation between their optical properties and their structures is discussed. [ABSTRACT FROM AUTHOR]