7,102 results on '"Hot press"'
Search Results
2. The effect of niobium-vanadium composite microalloying on the strength and toughness of hot press forming steel
3. Static strength analysis of hot press forming fuel tank bracket based on equivalent design
4. Recyclable Composite, Polypropylene Reinforced Coconut Coir by Using Hot Press Molding
5. Effect of Hot Press Forging Parameter on Microstructural Analysis and Mechanical Properties in Direct Recycling of Aluminium Aircraft Alloy (AA7075)
6. Influence Mechanism of Hot-Press Setting Time and Winding Tension on the Performance of Metallized Film Capacitors
7. Strongly Correlated High-Entropy Alloy Superconducting Properties and Vortex Dynamics of Ta1/6Nb2/6Hf1/6Zr1/6Ti1/6
8. Hot Pressing Recovery of Epoxy Insulating Material Cured with Anhydride based on Triethanolamine
9. Effect of deformation temperature on microstructure in coating of galvanized hot-formed steel
10. Optimization of the Effect of Hydraulic Hot-Pressing: Process Parameters on Tensile Properties of Kapok Fiber Nonwoven Web Based on Taguchi Experimental Design
11. Fabrication of Plaque Using Hot Press Method for Recycling Plastic Material
12. Hot-Pressing Sintering and Analytical Characterization of Coated Particle-Dispersed Fuel Pellets
13. Improvements of Strength of Layered Polypropylene Reinforced by Carbon Fiber by its Sizing Film and Electron Beam Under Protective Nitrogen Gas Atmosphere
14. Molding of Carbon-Epoxy Composite Prepregs for Applications in Aerospace Industries
15. Microstructural and Mechanical Characterization of Sintered and Hot Pressed Hybrid Metal Matrix Composites
16. Structural and Electrical Transport Investigations on Mg(ClO4)2-PEO-PEG Solid Polymer Electrolyte Prepared by Hot Press Assisted Route
17. Hot Press Molding
18. Hot Press Bonding
19. Recent Developments in Eco-Friendly Wood-Based Composites II.
20. Interface Evolution in the Process of Fabricating Aluminum Foam Sandwiches
21. Mechanical and Tribological Properties of Titanium Reinforced Polybenzimidazole Composites
22. Preparation of Bi2223 Phase by Spray Pyrolysis
23. Properties of Bi-Pb-Sr-Ca-Cu-O Bulk Superconductors Prepared by a Hot-Press Method
24. Preparation and Superconducting Properties of Bi2223 Thick Films
25. Research and application of laser welding process and automatic welding equipment for high strength steel plates
26. Analysis of forming process for hot stamping fuel tank bracket of commercial vehicles
27. Noise Absorption and Tensile Properties of Hybrid Waste Rubber Tyre-Based Polypropylene Composites for Car Door Panel Applications
28. Research on Molding Process of Large Composite Sandwich Structure Antenna
29. Incorporation of Silver Nanoparticles in Zinc Oxide Matrix in Polyester Thermoplastic Elastomer (TPE-E) Aiming Antibacterial Activity
30. Experimental Investigation of the Bullet-Proofing Capabilities of Fiber Metal Laminate (FML) Under Ballistic Impact Loading
31. Comparison of laser cutting technology routes for large-scale integrated hot stamping components
32. Piezoelectric, Pyroelectric, and Dielectric Properties of PZT: Nylon 11 and Graphite Doped PZT: Nylon11 Composites
33. Flexural Properties of PLA-Based Composites Reinforced with Strip, Short Fiber, or Powder of Bamboo
34. Examining the Influence of Stacking Sequence on the Mechanical Properties of Hybrid Abaca-Jute Vinyl Ester Composites
35. Processing and Fabrication of PVDF Sensors as a Dynamic Pressure Sensor
36. Life Estimation of Carbon Fiber-Reinforced Polymer (CFRP) with High-Density Polyethylene (HDPE) Under Thermal Loading Conditions
37. Valorization of Engineered Bamboo-Based Thermal Insulating Building Materials: A Journey from Nature to Nature Protection—A Case Study
38. Characterization of Hybrid Composite Polyester with Recycled HDPE Core by Hand Lay-Up Method
39. Development of Warm and Cold Tube Forming of Ti-6Al-4V Alloy by Press Forming
40. Numerical Modeling of Materials under Extreme Conditions.
41. Reaction Synthesis Mechanism of TiAl Alloy Fabricated by Hot Pressed Sintering with Mixed Powders of TiH2 and Aluminum
42. Recipes and Designs for Aerogels
43. Polypropylene Composites Reinforced by Natural and Recycled Fibers for Bumper Application: Effects of Fiber Loading on the Tensile Properties
44. Comparison of Mechanical and Corrosion Performances of AlSi-Coated PHS Plates with Different Coating Thickness
45. Improved Mechanical Properties and Use of Rice Husk-Reinforced Recycled Thermoplastic Composite in Safety Helmets
46. Manufacturing and Characteristics of Structural Sections from Wood Plastic Composites
47. Flax Fibers as Reinforcement in Poly (Lactic Acid) Biodegradable Composites
48. Research on Manufacture of the Lightweight Antenna Reflector Based on Carbon Fiber Reinforced Polymer
49. Flexural and Impact Properties of Flax/Kevlar and Jute/Carbon Hybrid Fibers-Reinforced PLA Nanocomposites for Aircraft Interior Applications
50. Tensile Characteristics of Waste Based Natural Fibre Composites from Rice Husk and Low Density Polythene Waste
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.