Search

We analyze the reversals of the large scale flow in Rayleigh-B\'enard convection both through particle image velocimetry flow visualization and direct numerical simulations (DNS) of the underlying Boussinesq equations in a (quasi) two-dimensional, rectangular geometry of aspect ratio 1. For medium Prandtl number there is a diagonal large scale convection roll and two smaller secondary rolls in the two remaining corners diagonally opposing each other. These corner flow rolls play a crucial role for the large scale wind reversal: They grow in kinetic energy and thus also in size thanks to plume detachments from the boundary layers up to the time that they take over the main, large scale diagonal flow, thus leading to reversal. Based on this mechanism we identify a typical time scale for the reversals. We map out the Rayleigh number vs Prandtl number phase space and find that the occurrence of reversals very sensitively depends on these parameters., Comment: 4 pages, 4 figures

We report an experimental study of the large-scale circulation (LSC) in a turbulent Rayleigh-B\'{e}nard convection cell with aspect ratio unity. The temperature-extremum-extraction (TEE) method for obtaining the dynamic information of the LSC is presented. With this method, the azimuthal angular positions of the hot ascending and cold descending flows along the sidewall are identified from the measured instantaneous azimuthal temperature profile. The motion of the LSC is then decomposed into two different modes: the azimuthal mode and the translational or off-center mode. Comparing to the previous sinusoidal-fitting (SF) method, it is found that both methods give the same information about the azimuthal motion of the LSC, but the TEE method in addition can provide information about the off-center motion of the LSC, which is found to oscillate time-periodically around the cell's central vertical axis with an amplitude being nearly independent of the turbulent intensity. It is further found that the azimuthal angular positions of the hot ascending flow near the bottom plate and the cold descending flow near the top plate oscillate periodically out of phase by $\pi$, leading to the torsional mode of the LSC. These oscillations are then propagated vertically along the sidewall by the hot ascending and cold descending fluids. When they reach the mid-height plane, the azimuthal positions of the hottest and coldest fluids again oscillate out of phase by $\pi$. It is this out-of-phase horizontal positional oscillation of the hottest and coldest fluids at the same horizontal plane that produces the off-center oscillation of the LSC. A direct velocity measurement further confirms the existence of the bulk off-center mode of the flow field near cell center., Comment: 13 pages, 14 figures, the paper has been submitted to J. Fluid Mech

We report an experimental study of the three-dimensional spatial structure of the low frequency temperature oscillations in a cylindrical Rayleigh-B\'{e}nard convection cell. It is found that thermal plumes are not emitted periodically, but randomly and continuously, from the top and bottom plates. We further found that the oscillation of the temperature field does not originate from the boundary layers, but rather is a result of the horizontal motion of the hot ascending and cold descending fluids being modulated by the twisting and sloshing motion of the bulk flow field., Comment: 5 figures

Temperature and velocity oscillations have been found in a rectangular Rayleigh-B\'{e}nard convection cell, in which one large scale convection roll exists. At $Ra=8.9 \times 10^{11}$ and $Pr=4$, temperature oscillation can be observed in most part of the system and the oscillation period remains almost constant, $t_T = 74 \pm 2$ seconds. Velocity oscillation can only be found in its horizontal component, $v_y$ (perpendicular to large scale circulation plane), near the cell sidewall, its oscillation period is also constant, $t_T = 65 \pm 2$ seconds, at these positions. Temperature and velocity oscillations have different Ra dependence, which are respectively indicated by Peclect number $Pe_T = 0.55Ra^{0.47}$ and $Pe_v = 0.28Ra^{0.50}$ . In comparison to the case of cylindrical cell, we find that the velocity oscillation is affected by the system geometry., Comment: 6 pages, 6 figures. submitted to PRE

We determined the refractive-index structure-factor $S_n(\bf k)$ from shadowgraphs of fluctuations in a layer of a homeotropically aligned nematic liquid crystal with negative dielectric anisotropy in the presence of an ac voltage of amplitude $V_0$ applied orthogonal to the layer. $S_n(\bf k)$ had rotational symmetry. Its integral $P(V_0)$ and amplitude $B(V_0)$ increased smoothly through the Fr\'eedericksz transition at $V_0 = V_F$. Its inverse width $\xi(V_0)$ and its relaxation rate $\Gamma_0(V_0)$ had cusps but remained finite at $V_F$. The results are inconsistent with the critical mode at a second-order phase transition., Comment: 4 pages, 5 figures