Search

Leveraging advancements in micro-scale technology, we propose a fleet of autonomous, low-cost, small solar sails for interplanetary exploration. The Berkeley Low-cost Interplanetary Solar Sail (BLISS) project aims to utilize small-scale technologies to create a fleet of tiny interplanetary femto-spacecraft for rapid, low-cost exploration of the inner solar system. This paper describes the hardware required to build a nearly 10 g spacecraft using a 1 m$^2$ solar sail steered by micro-electromechanical systems (MEMS) inchworm actuators. The trajectory control to a NEO, here 101955 Bennu, is detailed along with the low-level actuation control of the solar sail and the specifications of proposed onboard communication and computation. Two other applications are also shortly considered: sample return from dozens of Jupiter-family comets and interstellar comet rendezvous and imaging. The paper concludes by discussing the fundamental scaling limits and future directions for steerable autonomous miniature solar sails with onboard custom computers and sensors., Comment: 16 pages, 13 figures, 5 tables, 23 equations, and just over 10 years

NASA's Stardust mission utilized a sample collector composed of aerogel and aluminum foil to return cometary and interstellar particles to Earth. Analysis of the aluminum foil begins with locating craters produced by hypervelocity impacts of cometary and interstellar dust. Interstellar dust craters are typically less than one micrometer in size and are sparsely distributed, making them difficult to find. In this paper, we describe a convolutional neural network based on the VGG16 architecture that achieves high specificity and sensitivity in locating impact craters in the Stardust interstellar collector foils. We evaluate its implications for current and future analyses of Stardust samples.

We assess whether chondrules, once-molten mm-sized spheres filling the oldest meteorites, could have formed from super-km/s collisions between planetesimals in the solar nebula. High-velocity collisions release hot and dense clouds of silicate vapor which entrain and heat chondrule precursors. Thermal histories of CB chondrules are reproduced for colliding bodies $\sim$10--100 km in radius. The slower cooling rates of non-CB, porphyritic chondrules point to colliders with radii $\gtrsim$ 500 km. How chondrules, collisionally dispersed into the nebula, agglomerated into meteorite parent bodies remains a mystery. The same orbital eccentricities and inclinations that enable energetic collisions prevent planetesimals from re-accreting chondrules efficiently and without damage; thus the sedimentary laminations of the CB/CH chondrite Isheyevo are hard to explain by direct fallback of collisional ejecta. At the same time, planetesimal surfaces may be littered with the shattered remains of chondrules. The micron-sized igneous particles recovered from comet 81P/Wild-2 may have originated from in-situ collisions and subsequent accretion in the proto-Kuiper belt, obviating the need to transport igneous solids across the nebula. Asteroid sample returns from Hayabusa2 and OSIRIS-REx may similarly contain chondrule fragments., Comment: Final MNRAS accepted and proofed version. Minor updates to Sections 2.3 and 3.2 discussing the treatment of the nebular headwind in previous work, plus additional references

Comets likely formed in the outer regions of the protosolar nebula where they incorporated and preserved primitive presolar materials, volatiles resident in the outer disk, and more refractory materials from throughout the disk. The return of a sample of volatiles (i.e., ices and entrained gases), along with other components of a cometary nucleus, will yield numerous major scientific opportunities. We are unaccustomed to thinking of ices through a mineralogical/petrological lens, but at cryogenic temperatures, ices can be regarded as mineral components of rocky material like any other. This is truly Terra Incognita, as a sample from a natural cryogenic (10s of K) environment is unprecedented in any setting; currently, we can only make educated guesses about the nature of these materials on a microscopic scale. Such samples will provide an unparalleled look at the primordial gases and ices present in the early solar nebula, enabling insights into the gas phase and gas-grain chemistry of the nebula. Understanding the nature of the ices in their microscopic, petrographic relationship to the refractory components of the cometary sample will allow for the study of those relationships and interactions and a study of evolutionary processes on small icy bodies. The previous 2013-2022 Planetary Decadal Survey included a study of a Flagship-class cryogenic comet nucleus sample return mission, given the scientific importance of such a mission. However, the mission was not recommended for flight in the last Decadal Survey, in part because of the immaturity of critical technologies. Now, a decade later, the scientific importance of the mission remains and relevant technological advances have been made in both cryo instrumentation for flight and laboratory applications. Such a mission should be undertaken in the next decade., Comment: 8 pages, 2 figures, submitted as a white paper to the NAS Planetary Decadal Survey

We advocate for the realization of volatile sample return from various destinations including: small bodies, the Moon, Mars, ocean worlds/satellites, and plumes. As part of recent mission studies (e.g., Comet Astrobiology Exploration SAmple Return (CAESAR) and Mars Sample Return), new concepts, technologies, and protocols have been considered for specific environments and cost. Here we provide a plan for volatile sample collection and identify the associated challenges with the environment, transit/storage, Earth re-entry, and curation. Laboratory and theoretical simulations are proposed to verify sample integrity during each mission phase. Sample collection mechanisms are evaluated for a given environment with consideration for alteration. Transport and curation are essential for sample return to maximize the science investment and ensure pristine samples for analysis upon return and after years of preservation. All aspects of a volatile sample return mission are driven by the science motivation: isotope fractionation, noble gases, organics and prebiotic species; plus planetary protection considerations for collection and for the sample. The science value of sample return missions has been clearly demonstrated by previous sample return programs and missions. Sample return of volatile material is key to understanding (exo)planet formation, evolution, and habitability. Returning planetary volatiles poses unique and potentially severe technical challenges. These include preventing changes to samples between (and including) collection and analyses, and meeting planetary protection requirements., Comment: White paper submitted to the Planetary Science and Astrobiology Decadal Survey 2023-2032

In a consortium analysis of a large particle captured from the coma of comet 81P/Wild 2 by the Stardust spacecraft, we report the discovery of a field of fine-grained material (FGM) in contact with a large sulfide particle. The FGM was partially located in an embayment in the sulfide, so appears to have been largely protected from damage during hypervelocity capture in aerogel. Some of the FGM particles are indistinguishable in their characteristics from common components of chondritic-porous interplanetary dust particles (CP-IDPs), including glass with embedded metals and sulfides (GEMS) and equilibrated aggregates (EAs). The sulfide exhibits surprising Ni-rich lamellae, which may indicate that this particle experienced a long-duration heating event after its formation but before incorporation into Wild 2. We discuss the relationship of the FGM to the sulfide, to other Wild 2 particles and to the history of the Solar nebula.

The oxidation state of iron in the interstellar medium (ISM) can provide constraints on the processes that operated on material in the protosolar disk. We used synchrotron-based X-ray absorption spectra of several mineral standards and two kinds of primitive extraterrestrial materials to constrain the oxidation state and mineralogy of the host-phase of ISM Fe as measured by X-ray observations of Fe-L ISM absorption from the {\em Chandra X-ray Observatory}. Given the initial oxidation state of the building blocks of the Solar System, we explore nebular and parent-body processes that eventually led to the remarkable diversity of oxidation states of primitive Solar System materials. Oxidation of cometary material appears to have taken place in the nebula, before incorporation into cometary nuclei, although the mechanism is unknown., Comment: 9 pages, 4 figures, submitted to ApJ

Individual particles from comet 81P/Wild 2 collected by NASA's Stardust mission vary in size from small sub-$\mu$m fragments found in the walls of the aerogel tracks, to large fragments up to tens of $\mu$m in size found towards the termini of tracks. The comet, in an orbit beyond Neptune since its formation, retains an intact a record of early-Solar-System processes that was compromised in asteroidal samples by heating and aqueous alteration. We measured the O isotopic composition of seven Stardust fragments larger than $\sim$2 $\mu$m extracted from five different Stardust aerogel tracks, and 63 particles smaller than $\sim$2 $\mu$m from the wall of a Stardust track. The larger particles show a relatively narrow range of O isotopic compositions that is consistent with $^{16}$O-poor phases commonly seen in meteorites. Many of the larger Stardust fragments studied so far have chondrule-like mineralogy which is consistent with formation in the inner Solar System. The fine-grained material shows a very broad range of O isotopic compositions ($-70<\Delta^{17}$O$<+60$) suggesting that Wild 2 fines are either primitive outer-nebula dust or a very diverse sampling of inner Solar System compositional reservoirs that accreted along with a large number of inner-Solar-System rocks to form comet Wild 2.

Near-field infrared spectroscopy by elastic scattering of light from a probe tip resolves optical contrasts in materials at dramatically sub-wavelength scales across a broad energy range, with the demonstrated capacity for chemical identification at the nanoscale. However, current models of probe-sample near-field interactions still cannot provide a sufficiently quantitatively interpretation of measured near-field contrasts, especially in the case of materials supporting strong surface phonons. We present a model of near-field spectroscopy derived from basic principles and verified by finite-element simulations, demonstrating superb predictive agreement both with tunable quantum cascade laser near-field spectroscopy of SiO$_2$ thin films and with newly presented nanoscale Fourier transform infrared (nanoFTIR) spectroscopy of crystalline SiC. We discuss the role of probe geometry, field retardation, and surface mode dispersion in shaping the measured near-field response. This treatment enables a route to quantitatively determine nano-resolved optical constants, as we demonstrate by inverting newly presented nanoFTIR spectra of an SiO$_2$ thin film into the frequency dependent dielectric function of its mid-infrared optical phonon. Our formalism further enables tip-enhanced spectroscopy as a potent diagnostic tool for quantitative nano-scale spectroscopy., Comment: 19 pages, 9 figures

In January 2006, the Stardust mission will return the first samples from a solid solar-system body since Apollo, and the first samples of contemporary interstellar dust ever collected. Although sophisticated laboratory instruments exist for the analysis of Stardust samples, techniques for the recovery of particles and particle residues from aerogel collectors remain primitive. Here we describe our recent progress in developing techniques for extracting small volumes of aerogel, which we have called ``keystones,'' which completely contain particle impacts but minimize the damage to the surrounding aerogel collector. These keystones can be fixed to custom-designed micromachined silicon fixtures (so-called ``microforklifts''). In this configuration the samples are self-supporting, which can be advantageous in situations in which interference from a supporting substrate is undesirable. The keystones may also be extracted and placed onto a substrate without a fixture. We have also demonstrated the capability of homologously crushing these unmounted keystones for analysis techniques which demand flat samples., Comment: 17 pages, 11 figures, submitted to Meteoritics and Planetary Science

Contemporary interstellar dust has never been analyzed in the laboratory, despite its obvious astronomical importance and its potential as a probe of stellar nucleosynthesis and galactic chemical evolution. Here we report the discovery of a novel fluorescent aerogel which is capable of capturing hypervelocity dust grains and passively recording their kinetic energies. An array of these "calorimetric" aerogel collectors in low earth orbit would lead to the capture and identification of large numbers of interstellar dust grains., Comment: 13 pages, 4 figures, to appear in The Astrophysical Journal

Mica can store (for >1 Gy) etchable tracks caused by atoms recoiling from WIMPs. Ancient mica is a directional detector despite the complex motions it makes with respect to the WIMP "wind". We can exploit the properties of directionality and long integration time to probe for structure in the dark matter halo of our galaxy. We compute a sample of possible signals in mica for a plausible model of halo structure., Comment: 7 pages, 2 figures

Mica can store (for >1 Gy) etchable tracks caused by atoms recoiling from WIMPs. Because a background from fission neutrons will eventually limit this technique, a unique signature for WIMPs in ancient mica is needed. Our motion around the center of the Galaxy causes WIMPs, unlike neutrons, to enter the mica from a preferred direction on the sky. Mica is a directional detector and despite the complex rotations that natural mica crystals make with respect to this WIMP ``wind,'' there is a substantial dependence of etch pit density on present day mica orientation., Comment: 5 pages, LaTeX, 2 figures. Accepted for publication at Phys. Rev. Lett

Here, we report analyses by synchrotron X-ray fluorescence microscopy of the elemental composition of eight candidate impact features extracted from the Stardust Interstellar Dust Collector (SIDC). Six of the features were unambiguous tracks, and two were crater-like features. Five of the tracks are so-called midnight tracks that is, they had trajectories consistent with an origin either in the interstellar dust stream or as secondaries from impacts on the Sample Return Capsule (SRC). In a companion paper reporting synchrotron X-ray diffraction analyses of ISPE candidates, we show that two of these particles contain natural crystalline materials: the terminal particle of track 30contains olivine and spinel, and the terminal particle of track 34 contains olivine. Here, we show that the terminal particle of track 30, Orion, shows elemental abundances, normalized to Fe, that are close to CI values, and a complex, fine-grained structure. The terminal particle of track 34, Hylabrook, shows abundances that deviate strongly from CI, but shows little fine structure and is nearly homogenous. The terminal particles of other midnight tracks, 29 and 37, had heavy element abundances below detection threshold. A third, track28, showed a composition inconsistent with an extraterrestrial origin, but also inconsistent with known spacecraft materials. A sixth track, with a trajectory consistent with secondary ejecta from an impact on one of the spacecraft solar panels, contains abundant Ce and Zn. This is consistent with the known composition of the glass covering the solar panel. Neither crater-like feature is likely to be associated with extraterrestrial materials. We also analyzed blank aerogel samples to characterize background and variability between aerogel tiles. We found significant differences in contamination levels and compositions, emphasizing the need for local background subtraction for accurate quantification.

We report the quantitative characterization by synchrotron soft X-ray spectroscopy of 31 potential impact features in the aerogel capture medium of the Stardust Interstellar Dust Collector. Samples were analyzed in aerogel by acquiring high spatial resolution maps and high energy-resolution spectra of major rock-forming elements Mg, Al, Si, Fe, and others. We developed diagnostic screening tests to reject spacecraft secondary ejecta and terrestrial contaminants from further consideration as interstellar dust candidates. The results support an extraterrestrial origin for three interstellar candidates: I1043,1,30 (Orion) is a 3 pg particle with Mg-spinel, forsterite, and an iron-bearing phase. I1047,1,34 (Hylabrook) is a 4 pg particle comprising an olivine core surrounded by low-density, amorphous Mg-silicate and amorphous Fe, Cr, and Mn phases. I1003,1,40 (Sorok) has the track morphology of a high-speed impact, but contains no detectable residue that is convincingly distinguishable from the background aerogel. Twenty-two samples with an anthropogenic origin were rejected, including four secondary ejecta from impacts on the Stardust spacecraft aft solar panels, nine ejecta from secondary impacts on the Stardust Sample Return Capsule, and nine contaminants lacking evidence of an impact. Other samples in the collection included I1029,1,6, which contained surviving solar system impactor material. Four samples remained ambiguous: I1006,2,18, I1044,2,32, and I1092,2,38 were too dense for analysis, and we did not detect an intact projectile in I1044,3,33. We detected no radiation effects from the synchrotron soft X-ray analyses; however, we recorded the effects of synchrotron hard X-ray radiation on I1043,1,30 and I1047,1,34.

On the basis of an interstellar dust model compatible with Ulysses and Galileo observations, we calculate and predict the trajectories of interstellar dust (ISD) in the solar system and the distribution of the impact speeds, directions, and flux of ISD particles on the Stardust Interstellar Dust Collector during the two collection periods of the mission. We find that the expected impact velocities are generally low (less than 10 km per second) for particles with the ratio of the solar radiation pressure force to the solar gravitational force beta greater than 1, and that some of the particles will impact on the cometary side of the collector. If we assume astronomical silicates for particle material and a density of 2 grams per cubic centimeter, and use the Ulysses measurements and the ISD trajectory simulations, we conclude that the total number of (detectable) captured ISD particles may be on the order of 50. In companion papers in this volume, we report the discovery of three interstellar dust candidates in the Stardust aerogel tiles. The impact directions and speeds of these candidates are consistent with those calculated from our ISD propagation model, within the uncertainties of the model and of the observations.

Stardust, a NASA Discovery-class mission, was the first sample-return mission to return solid samples from beyond the Moon. Stardust was effectively two missions in one spacecraft: it returned the first materials from a known primitive solar system body, the Jupiter-family comet Wild 2; Stardust also returned a collector that was exposed to the contemporary interstellar dust stream for 200 days during the interplanetary cruise. Both collections present severe technical challenges in sample preparation and in analysis. By far the largest collection is the cometary one: approximately 300 micro g of material was returned from Wild 2, mostly consisting of approx. 1 ng particles embedded in aerogel or captured as residues in craters on aluminum foils. Because of their relatively large size, identification of the impacts of cometary particles in the collection media is straightforward. Reliable techniques have been developed for the extraction of these particles from aerogel. Coordinated analyses are also relatively straightforward, often beginning with synchrotron-based x-ray fluorescence (S-XRF), X-ray Absorption Near-Edge Spectoscopy (XANES) and x-ray diffraction (S-XRD) analyses of particles while still embedded in small extracted wedges of aerogel called ``keystones'', followed by ultramicrotomy and TEM, Scanning Transmission X-ray Microscopy (STXM) and ion microprobe analyses (e.g., Ogliore et al., 2010). Impacts in foils can be readily analyzed by SEM-EDX, and TEM analysis after FIB liftout sample preparation. In contrast, the interstellar dust collection is vastly more challenging. The sample size is approximately six orders of magnitude smaller in total mass. The largest particles are only a few pg in mass, of which there may be only approx.10 in the entire collection. The technical challenges, however, are matched by the scientific importance of the collection. We formed a consortium carry out the Stardust Interstellar Preliminary Examination (ISPE) to carry out an assessment of this collection, partly in order to characterize the collection in sufficient detail so that future investigators could make well-informed sample requests. The ISPE is the sixth PE on extraterrestrial collections carried out with NASA support. Some of the basic questions that we asked were: how many impacts are there in the collector, and what fraction of them have characteristics consistent with extraterrestrial materials? What is the elemental composition of the rock-forming elements? Is there crystalline material? Are there organics? Here we present coordinated microanalyses of particles captured in aerogel, using S-FTIR, S-XRF, STXM, S-XRD; and coordinated microanalyses of residues in aluminum foil, using SEMEDX, Auger spectroscopy, STEM, and ion microprobe. We discuss a novel approach that we employed for identification of tracks in aerogel, and new sample preparation techniques developed during the ISPE. We have identified seven particles - three in aerogel and four in foils - that are most consistent with an interstellar origin. The seven particles exhibit a large diversity in elemental composition. Dynamical evidence, supported supported by laboratory simulations of interstellar dust impacts in aerogel and foils, and numerical modeling of interstellar dust propagation in the heliosphere, suggests that at least some of the particles have high optical cross-section, perhaps due to an aggregate structure. However, the observations are most consistent with a variety of morphologies

The Stardust spacecraft carried the first spaceborne collector specifically designed to capture and return a sample of contemporary interstellar dust to terrestrial laboratories for analysis [1]. The collector was exposed to the interstellar dust stream in two periods in 2000 and 2002 with a total exposure of approximately 1.8 10(exp 6) square meters sec. Approximately 85% of the collector consisted of aerogel, and the remainder consisted of Al foils. The Stardust Interstellar Preliminary Examination (ISPE) was a consortiumbased effort to characterize the collection in sufficient detail to enable future investigators to make informed sample requests. Among the questions to be answered were these: How many impacts are consistent in their characteristics with interstellar dust, with interplanetary dust, and with secondary ejecta from impacts on the spacecraft? Are the materials amorphous or crystalline? Are organics detectable? An additional goal of the ISPE was to develop or refine the techniques for preparation, analysis, and curation of these tiny samples, expected to be approximately 1 picogram or smaller, roughly three orders of magnitude smaller in mass than the samples in other small particle collections in NASA's collections - the cometary samples returned by Stardust, and the collection of Interplanetary Dust Particles collected in the stratosphere.

Under the auspices of the Stardust Interstellar Preliminary Examination, picokeystones extracted from the Stardust Interstellar Dust Collector were examined with synchrotron Fourier transform infrared (FTIR) microscopy to establish whether they contained extraterrestrial organic material. The picokeystones were found to be contaminated with varying concentrations and speciation of organics in the native aerogel, which hindered the search for organics in the interstellar dust candidates. Furthermore, examination of the picokeystones prior to and post X-ray microprobe analyses yielded evidence of beam damage in the form of organic deposition or modification, particularly with hard X-ray synchrotron X-ray fluorescence. From these results, it is clear that considerable care must be taken to interpret any organics that might be in interstellar dust particles. For the interstellar candidates examined thus far, however, there is no clear evidence of extraterrestrial organics associated with the track and/or terminal particles. However, we detected organic matter associated with the terminal particle in Track 37, likely a secondary impact from the Al-deck of the sample return capsule, demonstrating the ability of synchrotron FTIR to detect organic matter in small particles within picokeystones from the Stardust interstellar dust collector.

We discuss the inherent difficulties that arise during "ground truth" characterization of the Stardust interstellar dust collector. The challenge of identifying contemporary interstellar dust impact tracks in aerogel is described within the context of background spacecraft secondaries and possible interplanetary dust particles and beta-meteoroids. In addition, the extraction of microscopic dust embedded in aerogel is technically challenging. Specifically, we provide a detailed description of the sample preparation techniques developed to address the unique goals and restrictions of the Interstellar Preliminary Exam. These sample preparation requirements and the scarcity of candidate interstellar impact tracks exacerbate the difficulties. We also illustrate the role of initial optical imaging with critically important examples, and summarize the overall processing of the collection to date.

The Stardust cometary and interstellar collections present unprecedented challenges in sample preparation and analysis. The ensemble of approx.80 tracks and dozens of foil craters from the cometary collection for which we have analyses exhibits a bewildering complexity and diversity of materials. The interstellar collection is even more challenging, because of the extremely low fluence of interstellar dust, a relatively large background of secondary ejecta from impacts on the spacecraft, and the small size of interstellar dust, approximately three orders of magnitude smaller in mass than typical cometary particles. Unlike with the other returned sample collections, characterization of these samples beyond basic photo-documentation is not generally practical at JSC. Even among the other small-particle collections, currently the cosmic dust and Hayabusa samples, SEM/EDX can provide basic chemistry. This is not possible with Stardust particles without destructive and invasive sample preparation. Furthermore, SEM/EDX requires isolating small grains from adhering aerogel. A reliable technique to carry out this task does not exist. Complete characterization of particles requires coordinated analyses using synchrotron and electron-beam microprobes, which do not exist at any one lab. Thus, it was recognized since the Stardust Preliminary Examination in 2006 that characterization of the samples would rely on the worldwide community of Stardust Investigators. Here we announce the development of community-editable, wiki-style Stardust compendia that will support this effort. Our intention is that this will facilitate sample requests by providing basic characterization of tracks. We expect that this will also support comprehensive meta-analyses (global syntheses of analyses) of the collections.

We report the discovery that impacts in the Stardust cometary collector are not distributed randomly in the collecting media, but appear to be clustered on scales smaller than 10 cm. We also report the discovery of at least two populations of oblique tracks. We evaluated several hypotheses that could explain the observations. No hypothesis was consistent with all the observations, but the preponderance of evidence points toward at least one impact on the central Whipple shield of the spacecraft as the origin of both clustering and low-angle oblique tracks. High-angle oblique tracks unambiguously originate from a non-cometary impact on the spacecraft bus just forward of the collector.

In January 2004, the Stardust spacecraft flew through the coma of comet P81/Wild2 at a relative speed of 6.1 km/sec. Cometary dust was collected at in a 0.1 sq m collector consisting of aerogel tiles and aluminum foils. Two years later, the samples successfully returned to earth and were recovered. We report the discovery that impacts in the Stardust cometary collector are not distributed randomly in the collecting media, but appear to be clustered on scales smaller than approx.10 cm. We also report the discovery of at least two populations of oblique tracks. We evaluated several hypotheses that could explain the observations. No hypothesis was consistent with all the observations, but the preponderance of evidence points toward at least one impact on the central Whipple shield of the spacecraft as the origin of both clustering and low-angle oblique tracks. High-angle oblique tracks unambiguously originate from a noncometary impact on the spacecraft bus just forward of the collector. Here we summarize the observations, and review the evidence for and against three scenarios that we have considered for explaining the impact clustering found on the Stardust aerogel and foil collectors.

GEMS (Glass Embedded with Metals and Sulfides) are highly enigmatic yet common components of anhydrous IDPs. We have recently proposed a model of GEMS formation from shock-accelerated crystalline dust in superbubbles[1] which explains the three most perplexing properties of GEMS: pseudomorphism[2], their chemistry[3], and their size range. In this Abstract, we briefly review the main points of the model, and suggest tests that will either prove or rule out this hypothesis.

In January 2006, the Stardust mission will return the first samples from a solid solar system body beyond the Moon. Stardust was in the news in January 2004, when it encountered comet Wild2 and captured a sample of cometary dust. But Stardust carries an equally important payload: the first samples of contemporary interstellar dust ever collected. Although it is known that interstellar (IS) dust penetrates into the inner solar system [2, 3], to date not even a single contemporary interstellar dust particle has been captured and analyzed in the laboratory. Stardust uses aerogel collectors to capture dust samples. Identification of interstellar dust impacts in the Stardust Interstellar Dust Collector probably cannot be automated, but will require the expertise of the human eye. However, the labor required for visual scanning of the entire collector would exceed the resources of any reasonably-sized research group. We are developing a project to recruit the public in the search for interstellar dust, based in part on the wildly popular SETI@home project, which has five million subscribers. We call the project Stardust@home. Using sophisticated chemical separation techniques, certain types of refractory ancient IS particles (so-called presolar grains) have been isolated from primitive meteorites (e.g., [4] ). Recently, presolar grains have been identified in Interplanetary Dust Particles[6]. Because these grains are not isolated chemically, but are recognized only by their unusual isotopic compositions, they are probably less biased than presolar grains isolated from meteorites. However, it is entirely possible that the typical interstellar dust particle is isotopically solar in composition. The Stardust collection of interstellar dust will be the first truly unbiased one.

The ECCO instrument is one of two instruments which comprise the HNX mission. The principal goal of ECCO (the Extremely-heavy Cosmic-ray Composition Observer) is to measure the age of galactic cosmic ray nuclei using the actinides (Th, U Pu, Cm) as clocks. As a bonus, ECCO will search with unprecedented sensitivity for long-lived elements in the superheavy island of stability. ECCO is an enormous array (23 m*'~2) of BP-1 glass track-etch detectors, and is based on the successful flight heritage of the Trek detector which was deployed externally on Mir. We present a description of the instrument, estimates of expected performance, and recent calibrations which demonstrate that the actinides can be resolved from each other with good charge resolution.