Search

We present a facile and safe ligand exchange method for readily synthesized CuInSe2 (CIS) and CuIn(1-x)Ga(x)Se2 (CIGS) nanocrystals (NCs) from oleylamine to 1-ethyl-5-thiotetrazole which preserves the colloidal stability of the chalcopyrite structure. 1-ethyl-5-thiotetrazole as thermally degradable ligand is adapted for the first time for trigonal pyramidal CIS NCs (18 nm), elongated CIS NCs (9 nm) and CIGS NCs (6 nm). The exchanged NC solutions are spin-coated onto Si/SiO2 substrates with predefined gold electrodes to yield ordered NC thin films. These films are thermally annealed at 260 C to completely remove 1-ethyl-5-thiotetrazol leaving virtually bare NC surfaces. We measure the current-voltage characteristics of the NC solids prior to ligand thermolysis in the dark and under illumination and after thermolysis of the ligand in the same manner. The conductivity of trigonal pyramidal CIS NCs increases by four orders of magnitude from 1.4*10E-9 S/cm in the dark to 1.4*10E-5 S/cm for ligand-free illuminated NC films. Elongated CIS NC films show an increase by three orders of magnitude and CIGS NC films exhibit improved conductivity by two orders of magnitude. The degree of conductivity enhancement thereby depends on the NC size accentuating the role of trap-states and internal grain boundaries in ligand-free NC solids for electrical transport. Our approach offers for the first time the possibility to address chalcopyrite materials' electrical properties in a virtually ligand-free state., Comment: 33 pages

We propose a new type of surfactants, namely, tetrazole derivatives which can be controllably removed from the nanoparticle surface. Tetrazoles are a peculiar class of heterocyclic compounds. The presence of four nitrogen atoms in the tetrazole ring determines their interesting physical and chemical properties. Tetrazoles show high thermal stability below 200C while decomposing at higher temperature with formation of gaseous products and no or very little solid residue. Moreover, the tetrazole group is known as an important ligand in coordination chemistry. Its donor nitrogen atoms can bind to various metal ions leading to stable complexes with diverse coordination modes of the heteroring. We report the synthesis of CdS NPs capped with 1-R-5-thiotetrazoles using two different synthetic schemes: solution-phase and solventless single precursor approaches. In both synthetic procedures cadmium thiotetrazolates were used as cadmium precursors and sources of surfactant., Comment: 4 pages, 3 figures, 2 schemes, 1 table

The attachment of semiconducting nanoparticles to carbon nanotubes is one of the most challenging subjects in nanotechnology. Successful high coverage attachment and control over the charge transfer mechanism and photo-current generation opens a wide field of new applications such as highly effective solar cells and fibre-enhanced polymers. In this work we study the charge transfer in individual double-wall carbon nanotubes highly covered with uniform ZnO nanoparticles. The synthetic colloidal procedure was chosen to avoid long-chained ligands at the nanoparticle-nanotube interface. The resulting composite material was used as conductive channel in a field effect transistor device and the electrical photo-response was analysed under various conditions. By means of the transfer characteristics we could elucidate the mechanism of charge transfer from non-covalently attached semiconducting nanoparticles to carbon nanotubes. The role of positive charges remaining on the nanoparticles is discussed in terms of a gating effect., Comment: 6 pages, 4 figures

We present the full thermoelectric characterization of nanostructured bulk PbTe and PbTe-PbSe samples fabricated from colloidal core-shell nanoparticles followed by spark plasma sintering. An unusually large thermopower is found in both materials, and the possibility of energy filtering as opposed to grain boundary scattering as an explanation is discussed. A decreased Debye temperature and an increased molar specific heat are in accordance with recent predictions for nanostructured materials. On the basis of these results we propose suitable core-shell material combinations for future thermoelectric materials of large electric conductivities in combination with an increased thermopower by energy filtering., Comment: 12 pages, 8 figures

We report the growth of an unstable shell-like gold structure around dihexagonal pyramidal CdSe nanocrystals in organic solution and the structural transformation to spherical domains by two means: i) electron beam irradiation (in situ) and (ii) addition of a strong reducing agent during synthesis. By varying the conditions of gold deposition, such as ligands present or the geometry of the CdSe nanocrystals, we were able to tune the gold domain size between 1.4 nm to 3.9 nm and gain important information on the role of surface chemistry in hetero nanoparticle synthesis and seed reactivity, both of which are crucial points regarding the chemical design of new materials for photocatalysis and optoelectronic applications., Comment: 5 pages, 4 figures

Controlling anisotropy is a key concept to generate complex functionality in advanced materials. For this, oriented attachment of nanocrystal building blocks, a self assembly of particles into larger single crystalline objects, is one of the most promising approaches in nanotechnology. We report here the 2D oriented attachment of PbS nanocrystals into ultra-thin single crystal sheets with dimensions on the micrometer scale. We found that this process is initiated by co-solvents which alter nucleation and growth rates during the primary nanocrystal formation and finally driven by dense packing of oleic acid ligands on {100} facets of PbS. The obtained nanosheets can be readily integrated in a photo-detector device without further treatment., Comment: 5 pages, 5 figures

We report a solution-processed, ligand supported synthesis of 15-20 nm thick Sb(2-x)Bi(x)Te3 nanoplatelets. After complete ligand removal by a facile NH3-based etching procedure, the platelets are spark plasma sintered to a p-type nanostructured bulk material with preserved crystal grain sizes. Due to this nanostructure, the total thermal conductivity is reduced by 60 % in combination with a reduction in electric conductivity of as low as 20 % as compared to the bulk material demonstrating the feasibility of the phonon-glass electron-crystal concept. An enhancement in the dimensionless thermoelectric figure of merit of up to 15 % over state-of-the-art bulk materials is achieved meanwhile shifting the maximum to significantly higher temperatures., Comment: 8 pages, 5 figures

The formation of monodisperse, tunable sized, alloyed nanoparticles of Ni, Co, or Fe with Pt and pure Pt nanoparticles attached to carbon nanotubes has been investigated. Following homogeneous nucleation, nanoparticles attach directly to non-functionalized singlewall and multiwall carbon nanotubes during nanoparticle synthesis as a function of ligand nature and the nanoparticle work function. These ligands do not only provide a way to tune the chemical composition, size and shape of the nanoparticles but also control a strong reversible interaction with carbon nanotubes and permit controlling the nanoparticle coverage. Raman spectroscopy reveals that the sp2 hybridization of the carbon lattice is not modified by the attachment. In order to better understand the interaction between the directly attached nanoparticles and the non-functionalized carbon nanotubes we employed first-principles calculations on model systems of small Pt clusters and both zig-zag and armchair singlewall carbon nanotubes. The detailed comprehension of such systems is of major importance since they find applications in catalysis and energy storage., Comment: 8 pages, 6 figures, 1 table

Indium phosphide (InP) nanostructures have been synthesized by means of colloidal chemistry. Under appropriate conditions needle-shaped nanostructures composed of an In head and an InP tail with lengths up to several micrometers could be generated in a one-pot synthesis. The growth is interpreted in terms of simultaneous decomposition of the In precursor and in situ generation of In and InP nanostructures. Owing to their specific design such In/InP nanoneedles suit the use as ready-made Schottky transistors. Their transfer and output characteristics are presented., Comment: 6 pages, 4 figures

We report a novel synthesis for near monodisperse, sub-10-nm Bi2Te3 nanoparticles. At first, a new reduction route to bismuth nanoparticles is described which are applied as starting materials in the formation of rhombohedral Bi2Te3 nanoparticles. After ligand removal by a novel hydrazine hydrate etching procedure, the nanoparticle powder is spark plasma sintered to a pellet with preserved crystal grain sizes. Unlike previous works on the properties of Bi2Te3 nanoparticles, the full thermoelectric characterization of such sintered pellets shows a highly reduced thermal conductivity and the same electric conductivity as bulk n-type Bi2Te3., Comment: 8 pages, 8 figures, 1 table

Monolayers of colloidally synthesized cobalt-platinum nanoparticles of different diameters characterized by TEM (transmission electron microscopy) were deposited on structured silicon oxide substrates and characterized by SEM (scanning electron microscopy), GISAXS (grazing incidence x-ray scattering), and electric transport measurements. The highly ordered nanoparticle films show a thermally activated electron hopping between spatially adjacent particles at room temperature and Coulomb blockade at low temperatures. We present a novel approach to experimentally determine the particles charging energies giving values of 6.7-25.4 meV dependent on the particles size and independent of the interparticle distance. These observations are supported by FEM (finite element method) calculations showing the self-capacitance to be the determining value which only depends on the permittivity constant of the surrounding space and the particles radius., Comment: 6 pages, 5 figures

Insights to the mechanism of CdSe nanoparticle attachment to carbon nanotubes following the hot injection method are discussed. It was observed that the presence of water improves the nanotube coverage while Cl containing media are responsible for the shape transformation of the nanoparticles and further attachment to the carbon lattice. The experiments also show that the mechanism taking place involves the right balance of several factors, namely, low passivated nanoparticle surface, particles with well-defined crystallographic facets, and interaction with an organics-free sp2 carbon lattice. Furthermore, this procedure can be extended to cover graphene by quantum dots., Comment: 5 pages, 5 figures

The crystallographic structure of CdSe nanoparticles attached to carbon nanotubes has been elucidated by means of high resolution transmission electron microscopy and high angle annular dark field scanning transmission electron microscopy tomography. CdSe rod-like nanoparticles, grown in solution together with carbon nanotubes, undergo a morphological transformation and become attached to the carbon surface. Electron tomography reveals that the nanoparticles are hexagonal-based with the (001) planes epitaxially matched to the outer graphene layer., Comment: 7 pages, 8 figures

The Langmuir-Blodgett technique was utilized and optimized to produce closed monolayers of cobalt-platinum nanoparticles over vast areas. It is shown that sample preparation, "dipping angle", and subphase type have a strong impact on the quality of the produced films. The amount of ligands on the nanoparticles surface must be minimized, the dipping angle must be around 105$^{\circ}$, while the glycol subphase is necessary to obtain nanoparticle monolayers. The achieved films were characterized by scanning electron microscopy (SEM) and grazing incidence x-ray scattering (GISAXS). The electrical properties of the deposited films were studied by direct current (DC) measurements showing a discrepancy to the variable range hopping transport from the granular metal model, and favoring the simple thermal activated charge transport. SEM, GISAXS as well as DC measurements confirm a narrow size distribution and high ordering of the deposited films., Comment: 8 pages, 6 figures

Novel applications in nanotechnology rely on the design of tailored nano-architectures. For this purpose, carbon nanotubes and nanoparticles are intensively investigated. In this work we study the influence of non-functionalized carbon nanotubes on the synthesis of CdSe nanoparticles by means of organometallic colloidal routes. This new synthesis methodology does not only provide an effective path to attach nanoparticles non-covalently to carbon nanotubes but represents also a new way to control the shape of nanoparticles., Comment: 6 pages, 6 figures