Search

Finite volume (FV) numerical solvers of the two-dimensional shallow water equations are core to industry-standard flood models. The second-order Discontinuous Galerkin (DG2) alternative, although a viable way forward to improve current FV-based flood models, is yet under-studied and rarely used to support flood modelling applications. This paper systematically explores and compares the predictive properties of a robust DG2 flood model to those of prominent FV-based industrial flood models. To identify the simplest and most efficient DG2 configuration suitable for flood inundation modelling, two variants - with and without local slope limiting - are considered. The numerical conservation properties of the DG2 variants are compared to those of a first-order FV (FV1) and a second-order FV (FV2) counterparts. The DG2 variants are then tested over five realistic flooding scenarios, recommended by the UK Environment Agency to validate 2D flood model capabilities, while comparing their performance against that of four FV-based commercial models (i.e. TUFLOW-FV1, TUFLOW-FV2, TUFLOW-HPC and Infoworks ICM). Results reveal that the DG2 variant without local limiting (DG2-NL) is capable to simulate shockless flood flows featured in a wide range of flood modelling applications. The DG2-NL shows closer predictions to commercial model outputs at twice-coarser spatial resolution, and can run twice faster to produce more informative hydrograph with small-scale transients over long-range simulations, even when the sampling is far away from the flooding source.

Stochastic Galerkin methods can quantify uncertainty at a fraction of the computational expense of conventional Monte Carlo techniques, but such methods have rarely been studied for modelling shallow water flows. Existing stochastic shallow flow models are not well-balanced and their assessment has been limited to stochastic flows with smooth probability distributions. This paper addresses these limitations by formulating a one-dimensional stochastic Galerkin shallow flow model using a low-order Wiener-Hermite Polynomial Chaos expansion with a finite volume Godunov-type approach, incorporating the surface gradient method to guarantee well-balancing. Preservation of a lake-at-rest over uncertain topography is verified analytically and numerically. The model is also assessed using flows with discontinuous and highly non-Gaussian probability distributions. Prescribing constant inflow over uncertain topography, the model converges on a steady-state flow that is subcritical or transcritical depending on the topography elevation. Using only four Wiener-Hermite basis functions, the model produces probability distributions comparable to those from a Monte Carlo reference simulation with 2000 iterations, while executing about 100 times faster. Accompanying model software and simulation data is openly available online.

Including terrain in atmospheric models gives rise to mesh distortions near the lower boundary that can degrade accuracy and challenge the stability of transport schemes. Multidimensional transport schemes avoid splitting errors on distorted, arbitrary meshes, and method-of-lines schemes have low computational cost because they perform reconstructions at fixed points. This paper presents a multidimensional method-of-lines finite volume transport scheme, "cubicFit", which is designed to be numerically stable on arbitrary meshes. Stability conditions derived from a von Neumann stability analysis are imposed during model initialisation to obtain stability and improve accuracy in distorted regions of the mesh, and near steeply-sloping lower boundaries. Reconstruction calculations depend upon the mesh only, needing just one vector multiply per face per time-stage irrespective of the velocity field. The cubicFit scheme is evaluated using three, idealised numerical tests. The first is a variant of a standard horizontal transport test on severely distorted terrain-following meshes. The second is a new test case that assesses accuracy near the ground by transporting a tracer at the lower boundary over steep terrain on terrain-following meshes, cut-cell meshes, and new, slanted-cell meshes that do not suffer from severe time-step constraints associated with cut cells. The third, standard test deforms a tracer in a vortical flow on hexagonal-icosahedral meshes and cubed-sphere meshes. In all tests, cubicFit is stable and largely insensitive to mesh distortions, and cubicFit results are more accurate than those obtained using a multidimensional linear upwind transport scheme. The cubicFit scheme is second-order convergent regardless of mesh distortions.

Dimensionally split advection schemes are attractive for atmospheric modelling due to their efficiency and accuracy in each spatial dimension. Accurate long time-steps can be achieved without significant cost using the flux-form semi-Lagrangian technique. The dimensionally split scheme used here is constructed from the one-dimensional Piecewise Parabolic Method and extended to two dimensions using COSMIC splitting. The dimensionally split scheme is compared with a genuinely multi-dimensional, method of lines scheme with implicit time-stepping which is stable for large Courant numbers. Two-dimensional advection test cases on Cartesian planes are proposed that avoid the complexities of a spherical domain or multi-panel meshes. These are solid body rotation, horizontal advection over orography and deformational flow. The test cases use distorted meshes either to represent sloping terrain or to mimic the distortions of a cubed sphere. Such mesh distortions are expected to accentuate the errors associated with dimension splitting, however, the dimensionally split scheme is very accurate on orthogonal meshes and accuracy decreases only a little in the presence of large mesh distortions. The dimensionally split scheme also loses some accuracy when long time-steps are used. The multi-dimensional scheme is almost entirely insensitive to mesh distortions and asymptotes to second-order accuracy at high resolution. As is expected for implicit time-stepping, phase errors occur when using long time-steps but the spatially well resolved features are advected at the correct speed and the multi-dimensional scheme is always stable. An estimate of computational cost reveals that the implicit scheme is the most expensive, particularly for large Courant numbers. If the multi-dimensional scheme is used instead with explicit time-stepping, the cost becomes similar to the dimensionally split scheme., Comment: 24 pages, 5 figures, submitted to Quarterly Journal of the Royal Meteorological society

In this paper, we provide an account of how to generate sentences with coordination constructions from clause-sized semantic representations. An algorithm is developed to generate sentences with ellipsis, gapping, right-node-raising, and non-constituent coordination constructions. Various examples from linguistic literature will be used to demonstrate that the algorithm does its job well., Comment: 7 pages, uses colacl.sty

Aggregating different pieces of similar information is necessary to generate concise and easy to understand reports in technical domains. This paper presents a general algorithm that combines similar messages in order to generate one or more coherent sentences for them. The process is not as trivial as might be expected. Problems encountered are briefly described., Comment: 3 pages, LaTex, uses aclap.sty, student sessions of ACL95

The invention comprises a method and/or an apparatus using a computer configured exercise system equipped with an electric motor to provide physical resistance to user motion in conjunction with means for sharing exercise system related data and/or user performance data with a secondary user, such as a medical professional, a physical therapist, a trainer, a computer generated competitor, and/or a human competitor. For example, the exercise system is used with a remote trainer to enhance exercise performance, with a remote medical professional for rehabilitation, and/or with a competitor in a competition, such as in a power/weightlifting competition or in a video game. The exercise system is optionally configured with an intelligent software assistant and knowledge navigator functioning as a personal assistant application.

The study was directed towards the further exploration of the use of attribute ratings as the basis for establishing the job component validity of tests, in particular by using different methods of combining "attribute-based" data with "job analysis" data to form estimates of the aptitude requirements of jobs. The primary focus of the study related to the use of attribute data for deriving estimates of requirements for psychomotor tests, since the previous use of attribute data with such tests had proved to be ineffective. Twenty-one methods of combining these two sets of data were investigated. The findings generally confirm the results of the previous study using such attribute data in indicating reasonably satisfactory prediction with cognitive tests, moderate prediction with perceptual tests, and poor prediction in the case of psychomotor tests. There were however, some variations in the effectiveness of the different methods in predicting aptitude requirements, with some of the methods being differentially effective in the prediction of such requirements with different types of tests. (Author/RC)

The invention comprises a method and/or an apparatus using a computer configured exercise system equipped with an electric motor to provide physical resistance to user motion in conjunction with means for sharing exercise system related data and/or user performance data with a secondary user, such as a medical professional, a physical therapist, a trainer, a computer generated competitor, and/or a human competitor. For example, the exercise system is used with a remote trainer to enhance exercise performance, with a remote medical professional for rehabilitation, and/or with a competitor in a competition, such as in a power/weightlifting competition or in a video game. The exercise system is optionally configured with an intelligent software assistant and knowledge navigator functioning as a personal assistant application.

The invention comprises a method and/or an apparatus using computer configured exercise equipment and an electric motor provided physical resistance in conjunction with a game system, such as a video game system, where the exercise system provides real physical resistance to a user interface. Results of user interaction with the user interface are integrated into a video game, such as running on a game console. The resistance system comprises: a subject interface, software control, a controller, an electric servo assist/resist motor, an actuator, and/or a subject sensor. The system provides actual physical interaction with a resistance device as input to the game console and game run thereon.

Spaceflight leads to muscle and bone atrophy. Isoinertial (free-weight) exercises provide a sufficient stimulus to elicit increases in both muscle strength and bone mineral density in Earth-based studies. While exercise equipment is in use on the International Space Station for crewmember health maintenance, current devices are too large to place in a transport vehicle or small spacecraft. Therefore, a portable computer controlled resistance exercise device is being developed that is able to simulate the inertial loading experienced when lifting a mass on Earth. This portable device weighs less than 50 lb and can simulate the resistance of lifting and lowering up to 600 lb of free-weights. The objective is to allow crewmembers to perform resistance exercise with loads capable of maintaining muscle and bone health. The device is reconfigurable and allows for the performance of typical Earth-based free-weight exercises. Forces exerted, volume of work, range of motion, time-under-tension, and speed/ acceleration of movement are recorded and can be remotely monitored to track progress and modify individual protocols based on exercise session data. A performance evaluation will be completed and data will be presented that include ground-reaction force comparisons between the device and free-weight dead-lifts over a spectrum of resistance levels. Movement biomechanics will also be presented.

This paper provides an overview of the required upgrades necessary for navigation of NASA's twin heliocentric science missions, Solar TErestrial RElations Observatory (STEREO) Ahead and Behind. The orbit determination of the STEREO spacecraft was provided by the NASA Goddard Space Flight Center's (GSFC) Flight Dynamics Facility (FDF) in support of the mission operations activities performed by the Johns Hopkins University Applied Physics Laboratory (APL). The changes to FDF s orbit determination software included modeling upgrades as well as modifications required to process the Deep Space Network X-band tracking data used for STEREO. Orbit results as well as comparisons to independently computed solutions are also included. The successful orbit determination support aided in maneuvering the STEREO spacecraft, launched on October 26, 2006 (00:52 Z), to target the lunar gravity assists required to place the spacecraft into their final heliocentric drift-away orbits where they are providing stereo imaging of the Sun.

This paper provides an overview of the required upgrades necessary for navigation of NASA's twin heliocentric science missions, Solar TErestrial RElations Observatory (STEREO) Ahead and Behind. The orbit determination of the STEREO spacecraft was provided by the NASA Goddard Space Flight Center's (GSFC) Flight Dynamics Facility (FDF) in support of the mission operations activities performed by the Johns Hopkins University Applied Physics Laboratory (APL). The changes to FDF's orbit determination software included modeling upgrades as well as modifications required to process the Deep Space Network X-band tracking data used for STEREO. Orbit results as well as comparisons to independently computed solutions are also included. The successful orbit determination support aided in maneuvering the STEREO spacecraft, launched on October 26, 2006 (00:52 Z), to target the lunar gravity assists required to place the spacecraft into their final heliocentric drift-away orbits where they are providing stereo imaging of the Sun.

A study was conducted to determine if rewards influence both the level of satisfaction a person feels towards his work and the performance exhibited by that person on the task. The study had four specific objectives: to develop a comprehensive list of job rewards; to develop, in particular, a list of rewards of an intrinsic nature; to compare published measures of job satisfaction; and to compare, in particular, the Air Force Occupational Attitude Inventory (OAI) against other measures of satisfaction. A number of sources were used in developing the taxonomy of job rewards. The final list consisted of six major categories: General Organizational Rewards, Task, Interaction with Others, Extrinsic Rewards, External Rewards, and Overall Job Satisfaction. (Within a major category there were also a number of subcategories as well as a large number of specific reward areas.) A considerable number (thirty-five) of intrinsic rewards were listed within the major category of "Task," under the sub-categories of "intrinsic rewards" and "personal control." Once the list of job rewards was complete, eighteen measures of job satisfaction were compared as to the degree to which they either fully or partially covered each of the major categories, subcategories, and specific reward areas. The OAI and the Minnesota IRC Satisfaction Scales were found to be the most comprehensive measures. The OAI covered 107 specific reward areas and thirteen of fifteen subcategories, while the Minnesota scales covered ninety specific reward areas and twelve of fifteen subcategories. (Author/BM)

The 12 articles in this publication provide indepth treatment of important aspects of in-house training programs for technical writing and editing. The articles deal with the following topics: the value of an in-house writing course, teaching in industry, developing an in-house writing course for engineers and scientists, a new approach to teaching writing in industry, teaching writing in private industry, industrial training of technical writers, an advanced in-house course in technical writing, a cure for writer's cramp in engineers, the editors' workshop program at General Motors Research Laboratories, the "pro's" of in-house teaching and how to offset the "con's," and how to make an in-house writing course enjoyable. An epilogue summarizes the main points to be considered in training young engineers and scientists to write effectively. (FL)