Search

This paper compares the design feasibility and economic advantage of photovoltaic (PV)-diesel generator (DG)-battery, PV-wind-battery, and PV-biogas (BG)-battery hybrid systems. The objective of this study is to investigate the performance of the three hybrid renewable energy systems (HRES) for sustainable electricity supply in remote areas of Afghanistan. Hybrid optimization model for multiple energy resources (HOMER) software was utilized to perform modeling, optimization, economic, sensitivity, and multi-year analysis of the hybrid systems. The findings indicates that the PV-biomass-battery hybrid system with $175,938 net present cost (NPC) and $0.29/kWh cost of energy (COE) is the most appropriate approach than the PV-DG-battery, PV-wind-battery and diesel-only system. However, the COE in optimal HRES is higher than the COE supplied by Afghanistan's national grid to the household resident in large cities, but COE in the hybrid system is about 37% lower than the cost of energy in the study area and some provinces of Afghanistan. The multi-year analysis was performed on the PV-biogas-battery hybrid system with considering a 0.8% yearly degradation of PV panels and a 2% load increase annually. The results show about an 11.2% increase in NPC and a 6.2% decrease in COE compare to the system without multi-year consideration. Moreover, the outputs from HOMER were evaluated using the Simplex algorithm. The results indicate that there were no significant variations in the results from HOMER and Simplex algorithms. Therefore, this illustrates that the simulations were consistent. The study's findings are anticipated to be helpful to stakeholders, decision-makers, and investors to achieve the goals and increase the electricity access rate in remote areas of Afghanistan. [ABSTRACT FROM AUTHOR]

This paper explores scenarios for powering rural areas in Gaita Selassie with renewable energy plants, aiming to reduce system costs by optimizing component numbers to meet energy demands. Various scenarios, such as combining solar photovoltaic (PV) with pumped hydro-energy storage (PHES), utilizing wind energy with PHES, and integrating a hybrid system of PV, wind, and PHES, have been evaluated based on diverse criteria, encompassing financial aspects and reliability. To achieve the results, meta-heuristics such as the Multiobjective Gray wolf optimization algorithm (MOGWO) and Multiobjective Grasshopper optimization algorithm (MOGOA) were applied using MATLAB software. Moreover, optimal component sizing has been investigated utilizing real-time assessment data and meteorological data from Gaita Sillasie, Ethiopia. Metaheuristic optimization techniques were employed to pinpoint the most favorable loss of power supply probability (LPSP) with the least cost of energy (COE) and total life cycle cost (TLCC) for the hybrid system, all while meeting operational requirements in various scenarios. The Multi-Objective Grey Wolf Optimization (MOGWO) technique outperformed the Multi-Objective Grasshopper Optimization Algorithm (MOGOA) in optimizing the problem, as suggested by the results. Furthermore, based on MOGWO findings, the hybrid solar PV-Wind-PHES system demonstrated the lowest COE (0.126€/kWh) and TLCC (€6,897,300), along with optimal satisfaction of the village's energy demand and LPSP value. In the PV-Wind-PHSS scenario, the TLCC and COE are 38%, 18%, 2%, and 1.5% lower than those for the Wind-PHS and PV-PHSS scenarios at LPSP 0%, according to MOGWO results. Overall, this research contributes valuable insights into the design and implementation of sustainable energy solutions for remote communities, paving the way for enhanced energy access and environmental sustainability. [ABSTRACT FROM AUTHOR]

From 1939 to 1941, the US Rural Electrification Administration conducted a nationwide educational campaign to share the benefits of electricity with rural Americans, known as the Electric Farm Equipment Show. A key part of the show was a series of appliance schools, which were run by female home economists and designed for a female audience. This article examines an appliance school organized for one REA women's club and the efforts of officials like REA chief home electrification specialist Clara O. Nale to navigate the disconnect between the official REA project, which assumed a gendered division of labor, and the real needs of the farm women they served. Through the Comanche County REA Women's Club, the article explores how REA administrators imagined that women would participate in its cooperative-led electrification efforts, women's engagement with and resistance to the REA's programming, and how technology adoption was ultimately mediated through women's priorities. [ABSTRACT FROM AUTHOR]

This article analyzes the conditions under which major infrastructural investments generate electoral returns. It addresses when and how the constraints imposed by myopic voters under democracy can be overcome. We argue that sustained policy spillovers are critical to broadening the pool of beneficiaries and yielding significant returns to the incumbent in the medium to long run. We make this case by analyzing Luz para Todos (LPT)—a large-scale rural electrification scheme implemented in Brazil by the Workers' Party (PT). Leveraging the LPT's quasi-experimental allocation, we document its positive and persistent impact on the PT's vote support several years after the program started running. We then illustrate the mechanism of policy spillovers by showing the impact of the LPT on the provision of education in targeted areas. Our findings suggest that infrastructure policies are more likely to generate electoral returns when the policy provision entails spillover effects through other policies. [ABSTRACT FROM AUTHOR]

Globally, rural areas suffer from less infrastructure relative to urban areas. Political and development economists have mainly attributed this disparity in infrastructure distribution to governance. The literature has sufficiently discussed the role that rural-urban infrastructure inequality plays in development outcomes such as poverty. However, not much is known about the effect of the rural-urban infrastructure gap on the environment. To contribute to knowledge and policy discussions, we investigate the impact of rural-urban energy access (in)equality on environmental degradation and the role governance plays using data from 47 sub-Saharan African countries from 2000–2020. Evidence from the heteroskedasticity-based instrumental variable regression consistent with Driscoll and Kraay's estimation revealed that bridging rural-urban energy access inequality is associated with reduction in environmental degradation. We also documented that the direct effect of the governance-related variables used is mixed. The moderation and marginal effect estimates showed that improving governance quality conditions equality in rural-urban energy access to reduce environmental degradation. From a policy perspective, these findings suggest that the implementation of rural electrification policies supported by a good governance system would play a crucial role in mitigating environmental degradation in developing countries. [ABSTRACT FROM AUTHOR]

This article explores how the public might actively participate in renewable energy projects by studying the role of local and credentialed experts in the development of micro-hydro technology for self-supply (off-grid electrification) or commercialization (on-grid electrification) in Central Java, Indonesia. All of the data were gathered qualitatively, including semi-structured interviews with local experts and energy experts, as well as interviews with local entrepreneurs, private companies, government agencies, end users, and civil society groups. Other methods included document analysis, observations, and site visits. The research found that credentialed and local experts have distinct sets of expertise and roles that complement one another. This challenges the "deficit" model of public understanding of science, which often claims that energy projects fail due to a lack of policy-relevant knowledge. The expertise of locals, their financial situation, and their geographic location are all considered to be linked with the design of micro-hydro technology, which is most typically run-of-river. While micro-hydro design is often related to "decentralization," standardized expertise has emerged as a critical impediment to alternative energy commercialization. This article concludes that public participation, supported by decentralized policies, is required to drive future growth and maintain the long-term viability of micro-hydro technology. [ABSTRACT FROM AUTHOR]

European states gradually established colonial rule in Africa between the mid nineteenth century and the beginning of the First World War. Historians have assessed the infrastructure introduced during this period through the lens of colonial state-building and resource extraction. This article offers another perspective by reconstructing the early history of electrification in Lagos Colony, one of the first British colonies in West Africa, within the contexts of African agency (that is, knowledge and socio-political influence) and class. It argues that electricity was not a novelty to Africans when the government opened the first power station in 1898. The principles of electricity were already being taught in the classroom and through public lectures in the 1860s, and temporary exhibitions of electric light had been a feature of Lagos society since the 1880s. Furthermore, because of some demographic advantages, the Africans of nineteenth-century Lagos were able to shape colonial policies, including on financing electricity. Lastly, contrary to colonial African case studies in which scholars have argued that racial politics affected access to electricity, extensive primary sources affirm that a rising number of Africans in Lagos enjoyed electric lighting on the streets, at religious centres and at home from 1898. [ABSTRACT FROM AUTHOR]

Dependence on fossil fuel has significantly resulted in global climate change and harms the ecosystem. The process of integration of electricity production with renewable energy sources can significantly improve the economics and energy balance, especially in rural areas. The optimization of decentralized energy generation in India is done by HOMER Pro software. It performs energy balance calculations and determines the least net present cost for each system configuration. In the present study, design of hybrid renewable energy system (HRES), i.e. solar PV, wind and biomass for a rural village in North Sikkim, has been done as a case study. The village is mainly dependent on agriculture and livestock economy. Daily load consumption by 160 houses in village calculated for two distinct seasons was 262.4 kWh with a peak energy demand of 63.45 kW. The optimized simulation results gave the best possible configuration combinations made up of 1.9 kW PV array, 20 kW biogas generator, 63 strings batteries, 1.96 kW inverter and a 2.3 kW rectifier. Results for the combination showed electricity generation was mainly from biogas generator which was cost-effective and sustainable alternative to grid extension. Moreover, the most economical HRES was strongly dependent on the available energy sources at the location. In addition to this, the system has internal rate of return of 7.42% and payback period of 4.53 years. The software helps in determining feasibility of the configuration and estimates the cost of installing and operating the system over the project lifetime. This techno-economic approach is viable and will meet the power demand of 160 households of the village and is therefore recommended for future electrification projects. [ABSTRACT FROM AUTHOR]

The use of decentralized renewable energy systems will continue to play a significant role in electricity generation especially in developing countries where grid expansion to most remote areas is uneconomical. The income levels of these off-grid communities are often low, such that there is a need for the delivery of cost-effective energy solutions through optimum control and sizing of energy system components. This paper aims at minimizing the net present cost (NPC) and the levelised cost of energy (LCOE). The study presents a hybrid power system involving a hydroelectric, solar photovoltaic (PV), and battery system for a rural community in Cameroon. The optimization of the system was done using HOMER Pro and validated using a meta-heuristic algorithm known as genetic algorithm (GA). The GA approach was programmed using the MATLAB software. After the HOMER simulation, the optimal power capacity of 3 kW solar PV, 334.89 Ah battery, and 32.2 kW microhydropower was used to meet the load. The village load profile had a daily energy usage of 431.32 kWh/day and a peak power demand of 38.49 kW. The optimized results showed an NPC and LCOE of $90,469.16 and 0.0453 $/kWh, respectively. The system configuration was tested against an increase in hydropower capacity, and it was observed that increasing the hydropower capacity has the ability to significantly reduce the LCOE as well as the battery and solar PV size. A comparative analysis of the two approaches showed that the optimization using GA was more cost-effective than HOMER Pro with the least LCOE of 0.0344 $/kWh and NPC of $86,990.94 as well as a loss of power supply probability (LPSP) of 0.99%. In addition, the GA method gave more hydropower generation than HOMER Pro. This supports the fact that stochastic methods are more realistic and economically viable. They also accurately predict system operation than deterministic methods. [ABSTRACT FROM AUTHOR]

Biomass gasification has significantly advanced in terms of performance and is increasingly used in rural off-grid electricity applications. The downdraft gasifier is primarily used in biomass gasification applications, in which it functions as a reactor into which biomass and gasifying air are introduced to generate producer gas that is then used in an engine generator to produce electricity. However, the safety and stability of biomass gasification remain challenging and depend on several factors, such as the startup heating process, which can affect risks of fire, explosion, and toxic gas emissions. As the biomass gasification is associated with high temperatures and demands safety measures, its startup process should follow a rigorous procedure that ensures reliable operation and minimizes the risk of hazard issues. This study presents a gasifier startup heating process based on a proposed safety protocols hazard analysis. The study indicates that the heating temperature in startup processes has been identified as a critical factor due to its role in impacting safety. The findings indicate that the biomass gasification process has significant risks, including the potential for fire, explosion, and release of environmental emissions via multiple pathways. The methods proposed here could lead to reduced risk from the abovementioned issues. [ABSTRACT FROM AUTHOR]

Rural farms constitute a vital component of a country's agricultural landscape, traditionally reliant on energy installations known for their reliability yet notorious for their energy-intensive and inefficient characteristics. While the smart farm concept, integrating renewable energy sources and resource management technologies, has seen widespread adoption in domestic and industrial sectors, rural farms have been slower to embrace these innovations. This study presents a groundbreaking solution, deployed on a rural farm in Portugal, resulting in an impressive 83.24% reduction in energy consumption sourced from the grid. Notably, this achievement translates to a substantial reduction in CO2 emissions, aligning with the growing need for environmentally sustainable farming practices. The technical intricacies of this pioneering solution are comprehensively described and juxtaposed with other scientific case studies, offering valuable insights for replication. This initiative represents a vital first step towards the integration or combination of conventional farming with photovoltaic energy production, exemplified by agrivoltaic systems. In conclusion, this research showcases the potential for rural farms to significantly enhance energy efficiency and financial viability, thereby contributing to a more sustainable and cost-effective agricultural sector. These findings serve as a model for similar endeavors, paving the way for a greener and more economically viable future for rural farming practices. [ABSTRACT FROM AUTHOR]

Electricity is one of the essential requirements for the economic development of a country. In Ethiopia, more than half of the total population does not have access to electric power. Micro-hydropower (MHP) is one of the most feasible renewable energy options for providing reliable electricity to rural areas. However, in low-income countries such as Ethiopia, the high price of a purpose-made turbine to generate electricity from MHP resources is difficult. This paper presents the feasibility study of a pump as a turbine (PAT) for MHP applications with and without impeller blade modification. The analysis was conducted in terms of initial investment cost, the net present value, payback periods, and the cost of energy. Decreasing blade thickness, blade tip rounding, adjusting blade inlet angle, and blade grooving, then comparing the result with PAT without modification and cross-flow turbine are the modification techniques considered in this research. Based on the projected system lifetime, the equivalent cost of power for the PAT and cross-flow turbines are 0.065 and 0.100 $/kWh respectively. The cross-flow turbine's payback period is 6.04 years, which is significantly longer than the PATs payback period of 3.42 years. From the entire study, it can be concluded that the MHP coupled with PAT provides a lower payback period and cheaper power production. Whereas, impeller blade modification has no significant advantage from the economic point of view. Generally, the impeller modification cost needs to be less than or equal to 25% of the initial cost of the PAT to use the less cost advantage of the PAT. [ABSTRACT FROM AUTHOR]

The present paper examines, based on literature review and data from Africa Energy Outlook 2019, the feasibility of adoption of renewable energy from the ocean for socioeconomic development in sub-Saharan Africa, given the enormous potential the region has for ocean-based sources of energy. The study concludes that mini tidal power plants and salt gradient power are the ocean energy sources most suitable for coastal development. It recommends a gradual reduction in subsidies of fossil fuel-based energy sources in favour of support to renewable energy, building human resources and technical capacity, the establishment of smart partnerships and mobilisation of resources for an effective promotion of ocean renewable energy. It recommends further, that community engagement is needed to assure ownership and acceptance. [ABSTRACT FROM AUTHOR]

Renewable energy resources are becoming more appealing as energy demand and fossil fuel costs increase. The hybridization of these resources has the potential to reduce unpredictability and intermittency while increasing efficiency. The accuracy of size optimization of hybrid renewable energy systems (HRES) can be improved by using accurate weather data that can be obtained through forecasting. Thus, to increase the precision of the size optimization, hourly forecasting of global horizontal irradiation, temperature, and wind speed for one year has been performed using Gaussian process regression (GPR), Support Vector Regression, Extreme Gradient Boosting, and Decision Tree techniques. The results of all four forecasting models (FM) are then compared and revealed that the results obtained from GPR are better than those of other FM; therefore, the forecasted data for solar, wind, and temperature obtained from GPR are used for sizing the HRES. The net present cost is utilized to analyze the viability of the HRES while considering system reliability. Furthermore, recently developed optimization algorithms, namely the Colony Predation Algorithm (CPA), Tunicate Swarm Algorithm (TSA), and Aquila Optimization (AO) algorithms have been applied to the sizing of a grid-connected HRES to meet the energy needs of a remote site in the Indian province of Haryana. A comparison of CPA, AO, and TSA has been carried out and revealed that TSA offers more promising outcomes. In addition, the simulation results demonstrate a 0.42% reduction in per unit cost of energy when forecasted data has been used for size optimization. [ABSTRACT FROM AUTHOR]

Geothermal resource assessment is crucial for the rural electrification of Nigeria. A comprehensive set of criteria was used to appraise promising geothermal sites in Nigeria. The evaluation of the sites was performed using the multi-criteria decision analysis (MCDA) method and taking into account evidence of a wide range of criteria from a set of geological, geophysical, well log, environmental, remote sensing, and geochemical datasets to appraise promising geothermal sites and to add to the current debate on the needed criteria for geothermal development. To gather relevant data, various sources such as bottom-hole temperature (BHT) data from different boreholes and oil and gas wells, aeromagnetic maps, reduced-to-the-pole, magnetic, heat flow, seismic, and geothermal gradient data from aerogravity maps, Bouguer anomaly maps, earthquake epicenter maps, satellite images, and geological maps were obtained from the literature. A case study of the thirty-six states of Nigeria, including the federal capital territory, Abuja (FCT), was conducted to illustrate how these criteria would reveal the technical aspect of the geothermal energy situation. A model was developed to show that the application of a wide range of criteria to the six datasets identified and analyzed in this study reveals that the datasets complement each other and should not be used independently. It can be found from the overall suitability map that more than 20% of the study area is suitable for geothermal energy development. It can also be observed from the map that some of the promising sites in Nigeria may include but are not limited to Bauchi, FCT, Taraba, Ebonyi, Adamawa, Oyo, and Nasarawa states in Nigeria. The opportunities for the further application of the approach are discussed, including the use of the model to help policymakers decide where to invest in the future. [ABSTRACT FROM AUTHOR]

This paper takes a cursory look at the problem of inadequate power supply in the rural healthcare centres of a developing country, specifically Nigeria, and proffers strategies to address this issue through the design of hybrid renewable energy systems combined with the existing unreliable grid in order to meet the healthcare load demand, thus ensuring higher reliability of available energy sources. The simulations, analysis and results presented in this paper are based on meteorological data and the load profiles of six selected locations in Nigeria, using which hybrid grid-connected systems integrating diesel, solar and wind energy sources are designed with configurations to give optimum output. The optimised design configurations in the considered case study, Ejioku, Okuru-Ama, Damare-Polo, Agbalaenyi, Kadassaka and Doso, produce very low energy costs of of 0.0791 $/kWh, 0.115 $/kWh, 0.0874 $/kWh, 0.0754 $/kWh, 0.0667 $/kWh and 0.0588 $/kWh, respectively, leveraging solar and wind energy sources which make higher percentage contributions at all sites. The load-following-dispatch strategy is adopted at all sites, ensuring that at every point in time, there is sufficient power to meet the needs of the healthcare centres. Further works on this topic could consider other strategies to optimise general energy usage on the demand side. [ABSTRACT FROM AUTHOR]

In 2021, Bangladesh reached 97% nation‐wide electricity access. With over 4.1 million solar home systems (SHS) installed by 60 Partner Organisations (POs) providing renewable electricity to more than 22 million rural people, SHS and microfinance have been instrumental in bridging and achieving the country's universal access goal. However, a huge gap remains in achieving the country's 100% use of renewable energy by 2050, with only 3.1% of current electricity generation accounted for by renewables. While at centralised level, governmental institutions are struggling to move past the legacy mandate of grid extension to an energy transformation paradigm at decentralised levels, rural Bangladeshi villages are already leading this transformation. Today, 100 solar peer‐to‐peer microgrids, built following the swarm electrification pathway, allow end‐users to run appliances, charge vehicles, and to trade renewable electricity for income. In this paper, we describe the organisational model of the partnership between Grameen Shakti, Bangladesh's largest PO, and climate‐tech start‐up ME SOLshare, the swarm electrification implementer. We assess, using data from the peer‐to‐peer grids, their socio‐economic and environmental impact, and their contribution to the SDG 2030 Agenda. Finally, we give an outlook towards the potential of achieving sustainable energy development through a scale‐up of the swarm electrification approach, including under a scenario of 100% national grid electrification. [ABSTRACT FROM AUTHOR]

The electrification of isolated or rural areas brings with it technical, economic, and social challenges that differentiate the operation of these networks compared to the traditional operation of large electrical power systems, such as the dependence of air or river transport on fuel for the supply of generation plants, the absence of individual measurement and the obsolete infrastructure of the distribution networks. Therefore, this paper proposes a hybrid methodology for studying a Colombian case, analyzing the development of programs for rational electricity use and energy efficiency in isolated areas. These first steps are related to the diagnosis of the current conditions of the power network, the identification of actors that can influence the regulation of the electricity service in the area, and the proposal of mechanisms that allow promoting the rational and efficient use of the electricity. [ABSTRACT FROM AUTHOR]

This review proposes an overview of hybrid electric and full electric powertrains dedicated to greener aircraft in the "sky decarbonization" context. After having situated the state of the art and context of energy hybridization in the aviation sector, we propose the visit of several architectures for powertrain electrification, situating the potential benefits but also the main challenges to be faced to takeoff these new solutions. Then, as a first example, we consider the EU project "HASTECS" (Hybrid Aircraft: reSearch on Thermal and Electric Components and Systems) in the framework of Clean Sky 2. It relates to a series hybrid chain integrated into a regional aircraft. This energy system integrates especially power electronics and electric machines with a high degree of integration, which raises the "thermal challenge" and the need to integrate cooling devices. Through the snowball effects typical of the aviation sector, this example emphasizes how important it is to "hunt for kilos", an alternative solution consisting of eliminating the power electronics within the powertrain. This is why we propose a second example, which concerns an AC power channel without power electronics that only integrates synchronous magnet machines (generator and motor) directly coupled on an AC bus. This last architecture nevertheless raises questions in terms of stability, with one solution being to insert an auxiliary hybridization branch via battery storage. Theoretical analyses and experiments at a reduced power scale show the viability of this concept. Finally, some recommendations for future research with potential technological breakthroughs complete that review. [ABSTRACT FROM AUTHOR]

Rural electrification is a crucial component of meeting sustainable development goals. In Pakistan, load shedding and power outages are frequent. According to the current data, Pakistan is experiencing a shortfall of power between 6000 and 6500 MW. Microgrid technology has the potential to provide a solution to this problem in an efficient and low‐cost manner. This paper proposes the development of a hybrid microgrid system (HMGS) for rural communities. For that purpose, a technological analysis of the HMGS system for rural electrification is performed. Solar photovoltaic (PV) and wind resource‐based renewable energy systems are considered in this work for the electrification of rural areas of Pakistan. A hybrid PV/wind system is designed using MATLAB software. Simulation results show that a 230‐V sinusoidal output voltage has been produced by the proposed model. The advantage of this model is that it minimizes the impact of transients and provides a sinusoidal output waveform. [ABSTRACT FROM AUTHOR]

Rural electrification is closely linked one way or another to rural development, and enables the understanding of the complexity of social and economic development paths. The objective of this work is to analyse rural electrification in a European peripherical country like Spain throughout the twentieth century, contributing to the international debate on the issue. The article studies the territorial expansion of electricity in the Spanish countryside, tracing different phases and explaining the delay in the construction of a national network. It also analyses the relationship that arose in the long term between electrification and the evolution of the agricultural sector. The article concludes that, in the Spanish case, rural electrification played a modest role in agricultural change until the 1980s and was, to a great extent, the consequence, rather than the cause, of the modernisation of the sector to these years. [ABSTRACT FROM AUTHOR]

This article discusses the book "Powering American Farms: The Overlooked Origins of Rural Electrification" by Richard F. Hirsh. The book challenges the traditional narrative that rural America received electricity as a result of the New Deal, arguing instead that private utility companies played a significant role in rural electrification. The author provides evidence to support this claim and sheds light on the relationship between private utility companies and rural America. The article also mentions the book "Growing Gardens, Building Power: Food Justice and Urban Agriculture in Brooklyn" by Justin Sean Myers, which explores the social history and contemporary work of the urban food justice movement in East New York, Brooklyn. Myers uses ethnographic research and interviews to examine how the efforts of East New York Farms! address racial, ethnic, and class inequities in the local food system. [Extracted from the article]

"Powering American Farms: The Overlooked Origins of Rural Electrification" by Richard F. Hirsh is a revisionist history that challenges the dominant narrative of federal agencies, such as the Rural Electrification Administration (REA) and the Tennessee Valley Authority (TVA), as the primary drivers of rural electrification in the United States. Hirsh argues that private power companies played a significant role in extending power to rural communities and experimenting with electricity on farms before government programs were implemented. The book explores the contributions of private utility coalitions and raises questions about the environmental implications and alternative paths that rural electrification could have taken. [Extracted from the article]

This paper presents a framework for the electrification of an isolated rural residential area through a decentralized hybrid renewable plus diesel energy system. Solar/wind/diesel power units have been combined to supply continuous electrical power to a small isolated rural community in the Kurdistan Region of Iraq. The selection of the unit rates for an optimum cost -effective solution is evaluated. The framework activities include wind/solar speed/Radiation data collection via monitoring instruments on the test location and a time-based load forecasting calculation method. Based on the available data for the wind/solar attributes a control system is designed to manage the hourly synchronization of the three units. The system is tested by the MATLAB simulator with satisfactory results. [ABSTRACT FROM AUTHOR]

Pico hydropower is a versatile power source providing electricity access for the world's poorest living in isolated locations. Though on a global scale, a significant market for such pico hydro systems exists in many countries, they are not widely used because they are not easily available, and the available head is low. One solution to address these issues comprehensively is using a pump as a turbine. However, in the case of a pump as turbine, studies on the performance of pico hydro systems are generally available only for heads above 10 m. To assess the technical feasibility of pico hydro plant at very low heads (less than 6 m), experimental studies were conducted using a pump as turbine (PaT) with a modified impeller vane coupled with a permanent magnet synchronous generator (PMSG). A power conditioner provided a stable output voltage of 220 V and a frequency of 50 Hz. The Pico hydro plant was evaluated with a test setup of a storage tank with a facility to have heads less than 6m and flow rates ranging from 6 to 9 liters per second. The results of the experiments at different heads - with and without power conditioner - are presented in tables and graphs, giving the output and efficiency of the different components of the system. Overall, it was demonstrated that this PaT could work at heads ranging from 2 to 4.5 m and at 4.5 m head with a flow rate of 7.5 l/s, the Pico hydro plant could generate a maximum power of 1.48 kW with an efficiency of 42%. The experimental setup was also used to power typical residential loads to demonstrate the effective applicability of this renewable energy resource. Overall, the results indicate the potential of Pico hydro systems that can help electrify communities to achieve SDG 7.1 using low-head hydropower resources. [ABSTRACT FROM AUTHOR]

The signal power in wireless communication systems is influenced by various factors, including the environment. These factors include path differences, operational frequency, and environmental conditions. Consequently, designing a communication system that generates a stronger signal is highly challenging. To address this, large-scale path-loss models are employed to estimate the path loss and signal power across different frequencies, distances, and environments. In this paper, we focused on the urban micro, urban macro, and rural macro environments to estimate path loss and signal power at millimeter wave frequencies. We compared the path loss and received power among different path-loss models developed by standard organizations. Simulation results indicate that the fifth-generation channel model provides enhanced path loss and signal power in urban micro environments, while the third-generation partnership project model performs well in urban macro and rural macro environments when compared to other path-loss models. [ABSTRACT FROM AUTHOR]

Providing electricity access to remote rural areas plays a crucial role in the socio-economic development of the rural community. The use of renewable energy sources (RES) for electrification of remote rural areas has been increased in the past two decades. The integrated renewable energy system (IRES), which embeds two or more RES, is paid great attention to satisfy the energy needs of the rural areas. In the present study, the IRES model is developed using solar, micro-hydro, biomass, biogas, and wind energy sources to meet the electricity demand of the seven un-electrified clusters of hamlets of Limkheda taluka in Dahod district of Gujarat state in India. The proposed IRES model is optimized for the lowest total net present cost (TNPC) and cost of energy (COE) of the system using artificial bee colony (ABC), grey wolf optimization (GWO), and teaching learning-based optimization (TLBO) algorithms. The optimal operational strategy has been developed to minimize the operating cost of the IRES and the optimum sizing of the system. An optimal power scheduling method with a linear programming problem (LPP) approach has been carried out in the MATLAB environment. The proposed power scheduling method effectively reduces the TNPC and COE of the IRES. Finally, the results recorded in the paper confirm that the proposed configuration together with the TLBO method offers the lowest TNPC of INR 9.5951 million and TAC of INR 1.1274 million at the estimated COE of INR 5.68 per kWh, which is comparable with respect to standardized ABC and GWO. [ABSTRACT FROM AUTHOR]

• A method for analyzing the triboelectrification process of plastics are proposed. • Effects of initial charge on the triboelectrification are experimentally analyzed. • The initial charge was first released into the control volume for some cases. Plastic recycling is one of the most economical and environment-friendly solutions for effective plastic waste management. Triboelectric separation is one of beneficial methods to accomplish this. A method and device capable of analyzing the triboelectrification of materials with specific initial charges are proposed in this study. The process of triboelectrification is experimentally analyzed for various initial-charge conditions using the proposed method and device. The triboelectrification process can be divided into two groups depending on the initial-charge conditions. For the specific initial conditions, termed Group 2 in this work, it is observed that the initial charge of one material is first released into the control volume, following which the two materials exchange charges, unlike in the conventional triboelectrification process. This study is expected to provide valuable insights into triboelectrification analysis, thereby advancing the multistage plastic-separation processes. [ABSTRACT FROM AUTHOR]

• Novel forecast-based charging strategy for standalone PV battery systems. • Extension of lithium-ion battery life by keeping the SOC low. • Case-study with 14 standalone PV battery systems in Nigeria. • Longer battery life and cheaper operational costs of systems. • Enabler for green rural electrification. Standalone PV battery systems have great potential to power the one billion people worldwide who lack access to electricity. Due to remoteness and poverty, durable and cheap systems are required for a broad range of applications. However, today's PV battery systems do not yet fully meet this requirement. Especially batteries still prove to be a hindrance, as they represent the most expensive and fastest-aging component in a PV battery system. This work aims to address this by prolonging battery life. For this purpose, a forecast-based charging strategy was developed. As lithium-ion batteries age slower in a low state-of-charge, the goal of the operation strategy is to only charge the battery as much as needed. The impact of the proposed charging strategy is examined in a case study using one year of historical data of 14 standalone systems in Nigeria. It was found that the proposed operation strategy could reduce the average battery state-of-charge by around 20% without causing power outages for the mini-grids. This would significantly extend the life of the battery and ultimately lead to a more durable and cheaper operation of standalone PV battery systems. [ABSTRACT FROM AUTHOR]

Limited access to electricity is a prevalent challenge in rural areas of most developing countries. This is majorly a result of economic, logistic and topographic challenges that limit the extension of grid network to such areas. The use of renewable energy sources (RES) to supply electricity to individual home is considered to be the best rural electrification approach since these resources are readily available and their sustainability can be ensured. Technical and non-technical analyses are carried out in hybrid optimization of multiple energy resources (HOMER) pro software to determine optimal configuration of renewable energy sources. The Particle swarm optimization (PSO) method has been implemented in MATLAB for the minimization of net present cost (NPC) under the given scenarios. In HOMER, total NPCs for solar photovoltaic system (SPV) and diesel generator (DG) of the same capacities are $ 3,013 and $ 28,116, respectively. In the PSO technique, costs are reduced to $ 2,089 and $ 19,488, respectively. This study will be a milestone for rural electrification. [ABSTRACT FROM AUTHOR]

World's large population lives in remote areas where electricity is unavailable or unreliable supply. For electricity supply, a low‐cost, minimum‐emission hybrid renewable energy system is necessary due to power shortages or unavailability, high electricity costs, and large greenhouse gas emissions. The current work develops a standalone hybrid power generating system and assesses its techno‐economic feasibility for rural sites in the Lucknow area of Northern India. To address the electric load requirement, the proposed work includes a system that includes a solar photovoltaic (SPV) module, a lead‐acid battery, a wind turbine (WT), and a diesel generator (DG). The system is sized and optimized using the hybrid optimization of multiple energy resources software. In this off‐grid system, the proposed system is intended for a home load need of 52.00 kWh/day with a peak of 11.04 kW. The technical and financial specifications are drawn from the local Indian market for the proposed standalone system. In this article, seven different resource combinations are investigated. A combination of 13 kW DG, 16 kW SPV, 50 kWh lead‐acid battery, 9 kW inverter, and 4 kW WT produces the best optimal system. With a 98.4% renewable portion, the cost of energy and total net present cost are $0.162/kWh and $57 390, respectively. The sensitivity analysis inflation and discount rates are 5.5% and 8%, respectively. As a consequence of the findings, we can conclude that the suggested standalone system is more cost‐effective for rural areas in Northern India. [ABSTRACT FROM AUTHOR]

Agricultural productivity remains pivotal to the sustenance of the economies and livelihoods of Sub-Saharan Africa (SSA) countries. Given the emerging threat of energy and environmental uncertainties globally, this study makes a foray into understanding the link among energy poverty, environmental degradation and agricultural productivity in 35 SSA nations in particular, and the nature of their impacts across the sub-region constituents namely; the Central, Eastern, Western and Southern sub-regional blocs in general. To begin, our identified variables comprised of the following: Energy Poverty Index, derived using the principal component analysis, agricultural value added as a share of GDP served as a measure of agricultural productivity and ecological footprint to represent environmental degradation. Subsequently, the instrumental variable generalized method of moment (IV‐GMM) technique was implemented for the aggregate SSA model, while the IV-two stage least square technique was adopted for the sub-regional estimations for the Central, East, West and South African blocs respectively. Major findings from the SSA model revealed that whereas the index of energy poverty has a significant positive influence, ecological footprint exhibited an inverse and significant impact on agricultural productivity, while the Central, East, West and South African models yielded mixed results given regional disparities in economic development, regional variations in agricultural productivity and an imbalance of available resources. Policy recommendations were suggested to, among other things, transform the energy, environmental and agricultural fortunes of the region. Aggregate energy poverty index has a significant positive influence on agricultural productivity in SSA. Components of energy poverty influences agricultural productivity in SSA as follows: rural electrification (positive and significant), access to clean fuels, RE consumption, and RE output (significant negative), national electricity access and urban electrification (EP2) (no significant influence). Rise in pollution (Ecological footprint) hampers the productivity of the agricultural sector in SSA. Energy poverty index and agricultural productivity have the following relationship in the sub-regional SSA blocs: Central Africa (no significant impact), East Africa (positive and significant), Southern Africa (negative but insignificant) and West Africa (positive but insignificant). Ecological footprint and agricultural productivity have the following relationship in the sub-regional SSA blocs: significantly reduces the productivity of agriculture in the Central African region, significantly stimulates agricultural productivity in the Eastern African region, Southern Africa reveals a mixed result, pollution via environmental degradation hampers the productivity of the agricultural sector in West Africa. [ABSTRACT FROM AUTHOR]

Microgrids system consisting of single or multiple energy resources and storage is used to provide electricity to remote rural areas. Subsequently, they can be worked in both grid-connected and islanded modes. Microgrids can provide stable energy solutions to areas where grid extension is either costly or not feasible. The system's long-term economic stability and sustainability must be considered throughout the microgrid's design. Renewable energy sources have a variety of objectives and possible restrictions. The current plan suggests a rural microgrid with integrated solar, diesel, and battery systems. The proposed microgrid for the rural area of Uttarakhand (India) is given a techno-economic and feasibility analysis. For the hilly region of India, a standalone microgrid is created to handle the home peak load of 13kW. Moth flam optimization (MFO) is utilized to optimize the proposed energy framework, and the results are compared with those of a genetic algorithm (GA) and particle swarm optimization (PSO). The optimal hybrid system's net current and energy costs are calculated to be $58372.00, with the cost of energy per unit being $0.14/kWh. Sensitivity analysis and robustness viability have been performed for the configuration. The finding suggested that the energy framework using MFO is 18% and 16% less expensive than GA and PSO, respectively. This research adds new direction to critical sustainable development among developed countries. [ABSTRACT FROM AUTHOR]

The tremendous and fast green transition in Denmark has initiated the large-scale grid-integration of renewable energy sources, electrification of energy consumption, and establishment of PtX and Energy Islands, setting goals for transmission grid development—such as the establishment of new connections—and for grid reconstruction—such as the extensive substitution of overhead lines (OHLs) with underground cables (UGCs). The share of UGCs in the Danish transmission grid is increasing. Presence of UGC has resulted in that resonances of the harmonic impedance characteristics of the transmission grid are brought within the harmonic order range coinciding with the harmonic emission sources and causing systemwide increase of the harmonic voltage distortion in the 400 kV transmission grid. The transformation of the 400 kV transmission grid has given rise to the need to predict harmonic voltage distortion using simulation models to secure an adequate power quality and support investment decisions and harmonic mitigation for the grid stage, which has not yet been established and which differs from the present grid. This paper presents the experiences of Energinet, the Transmission System Operator (TSO) in Denmark, with harmonic distortion in the Danish transmission grid due to the establishment of 400 kV UGCs, and the development of measurement-validated methods for harmonic distortion simulation and prediction. The paper also presents ongoing developments within, and research addressing, the prediction of harmonic distortion in meshed grids; for example, it explores where and how an analytical approach can replace observational studies with many numerical simulations. The methods shall make it possible to predict whether, where in the transmission grid, and for which harmonic orders connections that have not yet been commissioned may cause the violation of the planning levels, and which mitigations are necessary for bringing the harmonic distortion below the planning levels with respect to a given margin. [ABSTRACT FROM AUTHOR]

Understanding the spatial structure of a megaregion with urban and rural areas is crucial for promoting sustainable urbanization and urban–rural integration. Compared to the city network (or the network of urban areas), however, fewer studies focus on the network connecting rural areas or on the comparison of regional structures between urban and rural networks. Using weighted daily mobility flows from the massive mobile-phone signaling data, this study constructs an urban–urban mobility (UUM) network and an urban–rural mobility (URM) network in the Pearl River Delta (PRD) region. A weighted stochastic block model (WSBM) was adopted to identify and compare the latent mesoscale structures in the two networks. Results investigated a gradient community mesoscale structure nested with typical core–periphery (CP) structures in the UUM network and an asymmetric bipartite mesoscale structure mixed with CP hierarchies in the URM network. In a comparison of the different spatial configuration of urban/rural nodes and groupings of their roles, positions, and linkages, the study yielded empirical insights for renewed urban–rural interaction and potential planning pathways towards urban–rural integration. [ABSTRACT FROM AUTHOR]

Greenhouse gas (GHG) emissions from the transport sector and their effect on air quality are now a major concern, and the electrification of road freight transport is seen as one potential solution. However, this presents a challenge with the increased electricity demand on a depot's grid connection, and increased costs if this has to be upgraded. This study seeks to evaluate the impact on costs of introducing solar (PV) panels and a Battery Energy Storage System (BESS) when a company electrifies its fleet, based on two different priorities. On one hand, avoiding the use of the grid at peak price periods at the expense of upgrading the power connection. On the other hand, avoiding any power connection upgrade at the expense of incurring excess capacity charges. These two priorities aim to represent real-life challenges that logistics and commercial companies are facing when it comes to fleet electrification. The choice of prioritising one over the other may be driven by operational requirements and/or technical constraints. For each approach, a different energy management algorithm is developed using MATLAB and Simulink. The results obtained suggest that there is more flexibility in cost reduction when the upgrade of the power connection is not an obstacle. If the upgrade of the power network is not an option, the installation of PV panels and a BESS must be implemented together with other strategies (i.e., smart charging) to make it an economic option. [ABSTRACT FROM AUTHOR]

Power demand of isolated villages where on‐grid power supply is not economical can be met by standalone renewable energy system. Hybrid renewable energy system (HRES) considered in the current study involves photo‐voltaic, wind turbine, diesel generator, and battery. In the present study, the demand side energy management methods are used for energy management. The load shifting and strategic conservation methods are used. The energy management schemes are applied in the stage of load estimation. It is observed in the analysis that, the net present cost (NPC) of $55 263 is reduced to $34 009 with the application of demand side energy management strategies. The two control strategies, load‐following and predictive‐dispatch strategy are incorporated. The three types of batteries like lead‐acid, lithium‐ion, and zinc‐bromide are integrated, one at a time, for analysis. The analysis results in the optimal HRES configuration solution with the combination of both load shifting and strategic conservation techniques of demand side energy management. The NPC is reduced by 37% in comparison with the HRES without the application of energy management methods. The zinc‐bromide battery integrated HRES configuration through predictive dispatch control strategy with the application of demand side energy management schemes results in optimal solution for electrification of cluster of villages located in Uralagallu panchayat, Sagar Taluk, Shivamogga District, Karnataka, India. To the similar kind of geographical condition areas, the same HRES configuration with similar approach can be extended for electrification. [ABSTRACT FROM AUTHOR]

The inaccessibility of modern energy in low-income countries (LIC), especially in the Sub-Saharan African (SSA) region, continues to be a problem in the 21st century. The lack of access to modern energy has led to an inability to implement developmental structures and initiatives. While considerable progress and successes have been realised in the last three decades with increased activities and global commitments from international governments and multinational agencies through electrification projects in the SSA region, SSA countries remain off-track in their efforts to achieve the UN Sustainable Development Goal (SDG) 7. This is mainly demonstrated in sparsely populated rural regions where the high cost of centralised power generation, poor transmission and distribution infrastructures and economic factors have been a major barrier to electricity expansion. Although the use of RES (i.e., decentralised or stand-alone systems) have been acknowledged by the International Energy Agency (IEA) to be the least expensive route to improving access, its impact has not been effectively demonstrated regionally. Decentralised RES use in SSA countries have not seen significant uptake and/or enjoyed long-term sustainability owing to a number of factors. Malawi, despite its significant hydropower resources and the favourable proximity of its inhabitants to grid infrastructures, still has one of the lowest levels of access to electricity globally, with 86% of the population having no access to electricity. The country provides a good case study to investigate factors limiting electricity access in SSA countries. This paper explores the main issues that have historically hindered the uptake and sustainable operation of decentralised RES in the country. Recommendations to facilitate a potential improvement in RES use as a pathway to improved universal energy access are then put forward. [ABSTRACT FROM AUTHOR]

The decrease in oil production, the rise in environmental pollution, and the impending need to power areas in Colombia that do not currently have access to electricity have given the nation the task of finding new, decentralized, sustainable energy generation methods. Due to its favorable geographic location, renewable energy sources are a very appealing and affordable option in Colombia. This document presents a systematic literature review (SLR) developed to assess the recent techno-economic models and financial strategies in rural electrification using renewable energy systems. As a result, 19 documents were obtained, where the most informed funding sources included governmental, private and mixed shares. According to the information, the financial models were limited to estimate economic variables as levelized cost of electricity and net present cost. Finally, an emphasis on the need of governmental support to promote this kind of projects were reported. [ABSTRACT FROM AUTHOR]

Standalone low-voltage DC (LVDC) microgrids have emerged as potential alternatives in the context of effective rural electrification. The factors of reduction in conversion costs, paradigm shift in voltage levels of domestic loads made LVDC Microgrids more preferable. Being driven by intermittent renewable sources and dynamic loading, the voltage control is quite crucial and challenging to ensure a stable LVDC microgrid. Furthermore, delivering the control objectives becomes very difficult in the presence of sensor faults. In order to address this issue of sensor faults, this work proposes an Extended Luenberger Observer-based Active Sensor Fault-Tolerant Control (ELO-ASFTC) scheme. The proposed control scheme consists of the aspects of fault detection and isolation (FDI), and control reconfiguration. The proposed control scheme achieved the voltage tracking objective of the LVDC microgrid even under the presence of a faulty DC bus voltage sensor. The performance of the proposed scheme is observed in handling different sensor fault scenarios, loading conditions and irradiance changes. The effectiveness of the proposed control scheme is studied analytically, through the simulation studies in MATLAB, and hardware experimentation on the in house LVDC microgrid test bed. [ABSTRACT FROM AUTHOR]

Heavy trucks contribute significantly to climate change, and in 2020 were responsible for 7% of total Swedish GHG emissions and 5% of total global CO2 emissions. Here we study the full lifecycle of cargo trucks powered by different energy pathways, comparing their biomass feedstock use, primary energy use, net biogenic and fossil CO2 emission and cumulative radiative forcing. We analyse battery electric trucks with bioelectricity from stand‐alone or combined heat and power (CHP) plants, and pathways where bioelectricity is integrated with wind and solar electricity. We analyse trucks operated on fossil diesel fuel and on dimethyl ether (DME). All energy pathways are analysed with and without carbon capture and storage (CCS). Bioelectricity and DME are produced from forest harvest residues. Forest biomass is a limited resource, so in a scenario analysis we allocate a fixed amount of biomass to power Swedish truck transport. Battery lifespan and chemistry, the technology level of energy supply, and the biomass source and transport distance are all varied to understand how sensitive the results are to these parameters. We find that pathways using electricity to power battery electric trucks have much lower climate impacts and primary energy use, compared to diesel‐ and DME‐based pathways. The pathways using bioelectricity with CCS result in negative emissions leading to global cooling of the earth. The pathways using diesel and DME have significant and very similar climate impact, even with CCS. The robust results show that truck electrification and increased renewable electricity production is a much better strategy to reduce the climate impact of cargo transport than the adoption of DME trucks, and much more primary energy efficient. This climate impact analysis includes all fossil and net biogenic CO2 emissions as well as the timing of these emissions. Considering only fossil emissions is incomplete and could be misleading. [ABSTRACT FROM AUTHOR]

Given the constraints associated with grid expansion costs, limited access to reliable electricity, and priorities in addressing the climate agenda and Sustainable Development Goals in low-income countries, microgrids and off-grid solar projects represent a viable solution for rural electrification. This type of solution has the advantage of being less expensive than conventional technologies, is rapidly scalable, affordable, environmentally sustainable, and can play a critical role in empowering rural communities. In this context, this study proposed a spatial framework for off-grid solar energy planning based on a Geographical Information System and Boolean logic, Fuzzy logic, and Analytic Hierarchy Process Multicriteria Decision-Making methods. The results of the applied methodology show that the selection of optimal locations for off-grid solar photovoltaic microgrid projects in Mozambique is significantly influenced by the following order of criteria: climatology, orography, technical and location, social, and institutional criteria. Geographically, about 49% or 344,664.36 km2 of the total study area is initially suitable for an off-grid solar photovoltaic microgrid project; 4% is low suitable, 14% is moderately suitable, 18% is suitable, and 13% is highly suitable. However, 51% of the ranked areas fall into the not feasible and restricted areas, mainly in conservation areas, protected areas, and areas at high risk of flooding and cyclones, covering a total of 387,005.5 km2 within the study area. In general, the approach helps to reduce uncertainty and increase flexibility to identify appropriate sites and strengthen indicators of sustainable development impacts of decentralized rural electrification. [ABSTRACT FROM AUTHOR]

Hybrid power systems (HPS) based on photovoltaic (PV), diesel generators (DG), and energy storage systems (ESS) are widely used solutions for the energy supply of off-grid or isolated areas. The main hybridizing challenges are reliability, investment and operating costs, and carbon emissions problems. Since HPS are usually sized to provide energy continuously, it is essential to use the solar energy potential close to full capacity, especially on cloudy days. One of the prominent solutions to overcome these challenges is integrating solar tracking systems (STS). This article focuses on the optimal sizing of HPS based on PV-DG-ESS utilizing STS by analyzing technical, economic, and environmental aspects. Optimization is performed with the MILP solved via Gurobi, considering the net present cost (NPC) and loss of power supply probability (LPSP) objectives. The results indicate that horizontal and dual solar trackers can provide up to 50% better energy harvest performance and reduce NPC by up to 7%. It is also found that there is no significant difference in cost reduction between both systems. Moreover, STS is feasible if the cost is less than 375 USD and 250 USD for Sudan and South Sudan, respectively. [ABSTRACT FROM AUTHOR]

This research presents the findings of an evaluation of off-grid photovoltaic (PV) systems and their sustainability models in Colombia within the "Evaluation of Isolated Photovoltaic Systems and Their Sustainability Models" project supported by the Global Environment Fund (GEF). It involves the analysis of primary and secondary information on the photovoltaic energy projects for rural electrification in this country. Part of the information was obtained through interviews with different stakeholders who work in solar electrification in non-interconnected zones (NIZ), covering rural and island contexts. It was complemented by a comparative analysis of international projects implemented in Latin America. The results are shown as lessons learned, with a SWOT (strengths, weaknesses, opportunities, and threats) study representing the current situation of rural electrification with PV technology as perceived and describing the opportunities for the improvement of rural electrification strategies based on the successful experiences in the region. This research offers a comprehensive overview of how Colombian electrification could be led to address the last mile gap, integrating a solid sustainable perspective for the long-term view and ensuring community involvement towards a just energy transition. Therefore, this study proposes a series of guidelines to support those public policies that foster access to energy in the rural non-interconnected zones of Colombia. [ABSTRACT FROM AUTHOR]

Ethiopia has a wide range of environmentally-friendly, renewable energy resources that can assist the country to overcome its rural electricity problems. The Hybrid Optimization Model for Multiple Energy Resources (HOMER) software package was used to evaluate the viability of solar, hydro and wind hybrid power generation for a remote community in Ethiopia's Geba catchment. The hydrologic, climatic and demographic data were used to analyze the community's electrical supply and demand. Using survey data from chosen residences, the community's hourly and daily electricity demands were calculated. Two or more schemes were investigated besides the standalone scheme to assess the hybrid system's capacity. Wind, micro-hydro and solar can generate an average annual power of 96.8, 272.4 and 161.8 kW, respectively. A mix of energy sources can meet the community's electricity demand. During peak demand periods, however, the hybrid system's mean hourly variability in power production showed inadequacy, which could be remedied by power stored in the battery and generator output. The economic analysis showed that the hybrid system proposed here is less expensive, indicating that hybrid energy generation might be employed to electrify Ethiopia's remote settlements. We advise decision-makers and power authorities to use hybrid systems for rural electrification. [ABSTRACT FROM AUTHOR]