Search

We apply pre-trained architectures, originally developed for the ImageNet Large Scale Visual Recognition Challenge, for periocular recognition. These architectures have demonstrated significant success in various computer vision tasks beyond the ones for which they were designed. This work builds on our previous study using off-the-shelf Convolutional Neural Network (CNN) and extends it to include the more recently proposed Vision Transformers (ViT). Despite being trained for generic object classification, middle-layer features from CNNs and ViTs are a suitable way to recognize individuals based on periocular images. We also demonstrate that CNNs and ViTs are highly complementary since their combination results in boosted accuracy. In addition, we show that a small portion of these pre-trained models can achieve good accuracy, resulting in thinner models with fewer parameters, suitable for resource-limited environments such as mobiles. This efficiency improves if traditional handcrafted features are added as well., Comment: Accepted at IEEE WIFS 2024

The widespread use of mobile devices for all kind of transactions makes necessary reliable and real-time identity authentication, leading to the adoption of face recognition (FR) via the cameras embedded in such devices. Progress of deep Convolutional Neural Networks (CNNs) has provided substantial advances in FR. Nonetheless, the size of state-of-the-art architectures is unsuitable for mobile deployment, since they often encompass hundreds of megabytes and millions of parameters. We address this by studying methods for deep network compression applied to FR. In particular, we apply network pruning based on Taylor scores, where less important filters are removed iteratively. The method is tested on three networks based on the small SqueezeNet (1.24M parameters) and the popular MobileNetv2 (3.5M) and ResNet50 (23.5M) architectures. These have been selected to showcase the method on CNNs with different complexities and sizes. We observe that a substantial percentage of filters can be removed with minimal performance loss. Also, filters with the highest amount of output channels tend to be removed first, suggesting that high-dimensional spaces within popular CNNs are over-dimensionated., Comment: Submitted to Pattern Recognition Letters

Our study provides evidence that CNNs struggle to effectively extract orientation features. We show that the use of Complex Structure Tensor, which contains compact orientation features with certainties, as input to CNNs consistently improves identification accuracy compared to using grayscale inputs alone. Experiments also demonstrated that our inputs, which were provided by mini complex conv-nets, combined with reduced CNN sizes, outperformed full-fledged, prevailing CNN architectures. This suggests that the upfront use of orientation features in CNNs, a strategy seen in mammalian vision, not only mitigates their limitations but also enhances their explainability and relevance to thin-clients. Experiments were done on publicly available data sets comprising periocular images for biometric identification and verification (Close and Open World) using 6 State of the Art CNN architectures. We reduced SOA Equal Error Rate (EER) on the PolyU dataset by 5-26% depending on data and scenario., Comment: preprint manuscript

Safe overtakes in trucks are crucial to prevent accidents, reduce congestion, and ensure efficient traffic flow, making early prediction essential for timely and informed driving decisions. Accordingly, we investigate the detection of truck overtakes from CAN data. Three classifiers, Artificial Neural Networks (ANN), Random Forest, and Support Vector Machines (SVM), are employed for the task. Our analysis covers up to 10 seconds before the overtaking event, using an overlapping sliding window of 1 second to extract CAN features. We observe that the prediction scores of the overtake class tend to increase as we approach the overtake trigger, while the no-overtake class remain stable or oscillates depending on the classifier. Thus, the best accuracy is achieved when approaching the trigger, making early overtaking prediction challenging. The classifiers show good accuracy in classifying overtakes (Recall/TPR > 93%), but accuracy is suboptimal in classifying no-overtakes (TNR typically 80-90% and below 60% for one SVM variant). We further combine two classifiers (Random Forest and linear SVM) by averaging their output scores. The fusion is observed to improve no-overtake classification (TNR > 92%) at the expense of reducing overtake accuracy (TPR). However, the latter is kept above 91% near the overtake trigger. Therefore, the fusion balances TPR and TNR, providing more consistent performance than individual classifiers.

Robots are being designed to help people in an increasing variety of settings--but seemingly little attention has been given so far to the specific needs of women, who represent roughly half of the world's population but are highly underrepresented in robotics. Here we used a speculative prototyping approach to explore this expansive design space: First, we identified some potential challenges of interest, including crimes and illnesses that disproportionately affect women, as well as potential opportunities for designers, which were visualized in five sketches. Then, one of the sketched scenarios was further explored by developing a prototype, of a robotic helper drone equipped with computer vision to detect hidden cameras that could be used to spy on women. While object detection introduced some errors, hidden cameras were identified with a reasonable accuracy of 80\% (Intersection over Union (IoU) score: 0.40). Our aim is that the identified challenges and opportunities could help spark discussion and inspire designers, toward realizing a safer, more inclusive future through responsible use of technology., Comment: 10 pages, submitted 2024-4-5 to SCAI

We present a model-based feature extractor to describe neighborhoods around keypoints by finite expansion, estimating the spatially varying orientation by harmonic functions. The iso-curves of such functions are highly symmetric w.r.t. the origin (a keypoint) and the estimated parameters have well defined geometric interpretations. The origin is also a unique singularity of all harmonic functions, helping to determine the location of a keypoint precisely, whereas the functions describe the object shape of the neighborhood. This is novel and complementary to traditional texture features which describe texture-shape properties i.e. they are purposively invariant to translation (within a texture). We report on experiments of verification and identification of keypoints in forensic fingerprints by using publicly available data (NIST SD27) and discuss the results in comparison to other studies. These support our conclusions that the novel features can equip single cores or single minutia with a significant verification power at 19% EER, and an identification power of 24-78% for ranks of 1-20. Additionally, we report verification results of periocular biometrics using near-infrared images, reaching an EER performance of 13%, which is comparable to the state of the art. More importantly, fusion of two systems, our and texture features (Gabor), result in a measurable performance improvement. We report reduction of the EER to 9%, supporting the view that the novel features capture relevant visual information, which traditional texture features do not.

In this work we test the ability of deep learning methods to provide an end-to-end mapping between low and high resolution images applying it to the iris recognition problem. Here, we propose the use of two deep learning single-image super-resolution approaches: Stacked Auto-Encoders (SAE) and Convolutional Neural Networks (CNN) with the most possible lightweight structure to achieve fast speed, preserve local information and reduce artifacts at the same time. We validate the methods with a database of 1.872 near-infrared iris images with quality assessment and recognition experiments showing the superiority of deep learning approaches over the compared algorithms., Comment: Published at Proc. 25th European Signal Processing Conference, EUSIPCO 2017

The proliferation of cameras and personal devices results in a wide variability of imaging conditions, producing large intra-class variations and a significant performance drop when images from heterogeneous environments are compared. However, many applications require to deal with data from different sources regularly, thus needing to overcome these interoperability problems. Here, we employ fusion of several comparators to improve periocular performance when images from different smartphones are compared. We use a probabilistic fusion framework based on linear logistic regression, in which fused scores tend to be log-likelihood ratios, obtaining a reduction in cross-sensor EER of up to 40% due to the fusion. Our framework also provides an elegant and simple solution to handle signals from different devices, since same-sensor and cross-sensor score distributions are aligned and mapped to a common probabilistic domain. This allows the use of Bayes thresholds for optimal decision-making, eliminating the need of sensor-specific thresholds, which is essential in operational conditions because the threshold setting critically determines the accuracy of the authentication process in many applications., Comment: Published at Proc. 25th European Signal Processing Conference, EUSIPCO 2017. arXiv admin note: text overlap with arXiv:1902.08123

In this paper, we present a new approach for facial anonymization in images and videos, abbreviated as FIVA. Our proposed method is able to maintain the same face anonymization consistently over frames with our suggested identity-tracking and guarantees a strong difference from the original face. FIVA allows for 0 true positives for a false acceptance rate of 0.001. Our work considers the important security issue of reconstruction attacks and investigates adversarial noise, uniform noise, and parameter noise to disrupt reconstruction attacks. In this regard, we apply different defense and protection methods against these privacy threats to demonstrate the scalability of FIVA. On top of this, we also show that reconstruction attack models can be used for detection of deep fakes. Last but not least, we provide experimental results showing how FIVA can even enable face swapping, which is purely trained on a single target image., Comment: Accepted to ICCVW 2023 - DFAD 2023

This paper presents the summary of the Efficient Face Recognition Competition (EFaR) held at the 2023 International Joint Conference on Biometrics (IJCB 2023). The competition received 17 submissions from 6 different teams. To drive further development of efficient face recognition models, the submitted solutions are ranked based on a weighted score of the achieved verification accuracies on a diverse set of benchmarks, as well as the deployability given by the number of floating-point operations and model size. The evaluation of submissions is extended to bias, cross-quality, and large-scale recognition benchmarks. Overall, the paper gives an overview of the achieved performance values of the submitted solutions as well as a diverse set of baselines. The submitted solutions use small, efficient network architectures to reduce the computational cost, some solutions apply model quantization. An outlook on possible techniques that are underrepresented in current solutions is given as well., Comment: Accepted at IJCB 2023

Periocular biometrics has been established as an independent modality due to concerns on the performance of iris or face systems in uncontrolled conditions. Periocular refers to the facial region in the eye vicinity, including eyelids, lashes and eyebrows. It is available over a wide range of acquisition distances, representing a trade-off between the whole face (which can be occluded at close distances) and the iris texture (which do not have enough resolution at long distances). Since the periocular region appears in face or iris images, it can be used also in conjunction with these modalities. Features extracted from the periocular region have been also used successfully for gender classification and ethnicity classification, and to study the impact of gender transformation or plastic surgery in the recognition performance. This paper presents a review of the state of the art in periocular biometric research, providing an insight of the most relevant issues and giving a thorough coverage of the existing literature. Future research trends are also briefly discussed., Comment: Published in: 2016 4th International Conference on Biometrics and Forensics (IWBF). arXiv admin note: substantial text overlap with arXiv:1810.03360

This paper describes an adaptation of the Local Interpretable Model-Agnostic Explanations (LIME) AI method to operate under a biometric verification setting. LIME was initially proposed for networks with the same output classes used for training, and it employs the softmax probability to determine which regions of the image contribute the most to classification. However, in a verification setting, the classes to be recognized have not been seen during training. In addition, instead of using the softmax output, face descriptors are usually obtained from a layer before the classification layer. The model is adapted to achieve explainability via cosine similarity between feature vectors of perturbated versions of the input image. The method is showcased for face biometrics with two CNN models based on MobileNetv2 and ResNet50.

The widespread use of mobile devices for various digital services has created a need for reliable and real-time person authentication. In this context, facial recognition technologies have emerged as a dependable method for verifying users due to the prevalence of cameras in mobile devices and their integration into everyday applications. The rapid advancement of deep Convolutional Neural Networks (CNNs) has led to numerous face verification architectures. However, these models are often large and impractical for mobile applications, reaching sizes of hundreds of megabytes with millions of parameters. We address this issue by developing SqueezerFaceNet, a light face recognition network which less than 1M parameters. This is achieved by applying a network pruning method based on Taylor scores, where filters with small importance scores are removed iteratively. Starting from an already small network (of 1.24M) based on SqueezeNet, we show that it can be further reduced (up to 40%) without an appreciable loss in performance. To the best of our knowledge, we are the first to evaluate network pruning methods for the task of face recognition., Comment: Published at VIII International Workshop on Artificial Intelligence and Pattern Recognition, IWAIPR 2023

Millions of vehicles are transported every year, tightly parked in vessels or boats. To reduce the risks of associated safety issues like fires, knowing the location of vehicles is essential, since different vehicles may need different mitigation measures, e.g. electric cars. This work is aimed at creating a solution based on a nano-drone that navigates across rows of parked vehicles and detects their license plates. We do so via a wall-following algorithm, and a CNN trained to detect license plates. All computations are done in real-time on the drone, which just sends position and detected images that allow the creation of a 2D map with the position of the plates. Our solution is capable of reading all plates across eight test cases (with several rows of plates, different drone speeds, or low light) by aggregation of measurements across several drone journeys., Comment: Published at VIII International Workshop on Artificial Intelligence and Pattern Recognition, IWAIPR 2023

One weakness of machine-learning algorithms is the need to train the models for a new task. This presents a specific challenge for biometric recognition due to the dynamic nature of databases and, in some instances, the reliance on subject collaboration for data collection. In this paper, we investigate the behavior of deep representations in widely used CNN models under extreme data scarcity for One-Shot periocular recognition, a biometric recognition task. We analyze the outputs of CNN layers as identity-representing feature vectors. We examine the impact of Domain Adaptation on the network layers' output for unseen data and evaluate the method's robustness concerning data normalization and generalization of the best-performing layer. We improved state-of-the-art results that made use of networks trained with biometric datasets with millions of images and fine-tuned for the target periocular dataset by utilizing out-of-the-box CNNs trained for the ImageNet Recognition Challenge and standard computer vision algorithms. For example, for the Cross-Eyed dataset, we could reduce the EER by 67% and 79% (from 1.70% and 3.41% to 0.56% and 0.71%) in the Close-World and Open-World protocols, respectively, for the periocular case. We also demonstrate that traditional algorithms like SIFT can outperform CNNs in situations with limited data or scenarios where the network has not been trained with the test classes like the Open-World mode. SIFT alone was able to reduce the EER by 64% and 71.6% (from 1.7% and 3.41% to 0.6% and 0.97%) for Cross-Eyed in the Close-World and Open-World protocols, respectively, and a reduction of 4.6% (from 3.94% to 3.76%) in the PolyU database for the Open-World and single biometric case., Comment: Submitted preprint to IEE Access

Graph neural networks (GNNs), especially dynamic GNNs, have become a research hotspot in spatio-temporal forecasting problems. While many dynamic graph construction methods have been developed, relatively few of them explore the causal relationship between neighbour nodes. Thus, the resulting models lack strong explainability for the causal relationship between the neighbour nodes of the dynamically generated graphs, which can easily lead to a risk in subsequent decisions. Moreover, few of them consider the uncertainty and noise of dynamic graphs based on the time series datasets, which are ubiquitous in real-world graph structure networks. In this paper, we propose a novel Dynamic Diffusion-Variational Graph Neural Network (DVGNN) for spatio-temporal forecasting. For dynamic graph construction, an unsupervised generative model is devised. Two layers of graph convolutional network (GCN) are applied to calculate the posterior distribution of the latent node embeddings in the encoder stage. Then, a diffusion model is used to infer the dynamic link probability and reconstruct causal graphs in the decoder stage adaptively. The new loss function is derived theoretically, and the reparameterization trick is adopted in estimating the probability distribution of the dynamic graphs by Evidence Lower Bound during the backpropagation period. After obtaining the generated graphs, dynamic GCN and temporal attention are applied to predict future states. Experiments are conducted on four real-world datasets of different graph structures in different domains. The results demonstrate that the proposed DVGNN model outperforms state-of-the-art approaches and achieves outstanding Root Mean Squared Error result while exhibiting higher robustness. Also, by F1-score and probability distribution analysis, we demonstrate that DVGNN better reflects the causal relationship and uncertainty of dynamic graphs.

Low-cost portable devices capable of capturing signature signals are being increasingly used. Additionally, the social and legal acceptance of the written signature for authentication purposes is opening a range of new applications. We describe a highly versatile and scalable prototype for Web-based secure access using signature verification. The proposed architecture can be easily extended to work with different kinds of sensors and large-scale databases. Several remarks are also given on security and privacy of network-based signature verification., Comment: Published at IEEE Aerospace and Electronic Systems Magazine

Periocular refers to the externally visible region of the face that surrounds the eye socket. This feature-rich area can provide accurate identification in unconstrained or uncooperative scenarios, where the iris or face modalities may not offer sufficient biometric cues due to factors such as partial occlusion or high subject-to-camera distance. The COVID-19 pandemic has further highlighted its importance, as the ocular region remained the only visible facial area even in controlled settings due to the widespread use of masks. This paper discusses the state of the art in periocular biometrics, presenting an overall framework encompassing its most significant research aspects, which include: (a) ocular definition, acquisition, and detection; (b) identity recognition, including combination with other modalities and use of various spectra; and (c) ocular soft-biometric analysis. Finally, we conclude by addressing current challenges and proposing future directions., Comment: Published at IEEE Computer journal

The vulnerabilities of fingerprint-based recognition systems to direct attacks with and without the cooperation of the user are studied. Two different systems, one minutiae-based and one ridge feature-based, are evaluated on a database of real and fake fingerprints. Based on the fingerprint images quality and on the results achieved on different operational scenarios, we obtain a number of statistically significant observations regarding the robustness of the systems., Comment: Published at Springer Journal of Telecommunication Systems, Special Issue of Biometrics Systems & Applications

Workplace injuries are common in today's society due to a lack of adequately worn safety equipment. A system that only admits appropriately equipped personnel can be created to improve working conditions. The goal is thus to develop a system that will improve workers' safety using a camera that will detect the usage of Personal Protective Equipment (PPE). To this end, we collected and labeled appropriate data from several public sources, which have been used to train and evaluate several models based on the popular YOLOv4 object detector. Our focus, driven by a collaborating industrial partner, is to implement our system into an entry control point where workers must present themselves to obtain access to a restricted area. Combined with facial identity recognition, the system would ensure that only authorized people wearing appropriate equipment are granted access. A novelty of this work is that we increase the number of classes to five objects (hardhat, safety vest, safety gloves, safety glasses, and hearing protection), whereas most existing works only focus on one or two classes, usually hardhats or vests. The AI model developed provides good detection accuracy at a distance of 3 and 5 meters in the collaborative environment where we aim at operating (mAP of 99/89%, respectively). The small size of some objects or the potential occlusion by body parts have been identified as potential factors that are detrimental to accuracy, which we have counteracted via data augmentation and cropping of the body before applying PPE detection., Comment: Accepted for publication at ICPRAM

One of the biggest challenges in machine learning is data collection. Training data is an important part since it determines how the model will behave. In object classification, capturing a large number of images per object and in different conditions is not always possible and can be very time-consuming and tedious. Accordingly, this work explores the creation of artificial images using a game engine to cope with limited data in the training dataset. We combine real and synthetic data to train the object classification engine, a strategy that has shown to be beneficial to increase confidence in the decisions made by the classifier, which is often critical in industrial setups. To combine real and synthetic data, we first train the classifier on a massive amount of synthetic data, and then we fine-tune it on real images. Another important result is that the amount of real images needed for fine-tuning is not very high, reaching top accuracy with just 12 or 24 images per class. This substantially reduces the requirements of capturing a great amount of real data., Comment: Accepted for publication at ICPRAM

Fires have destructive power when they break out and affect their surroundings on a devastatingly large scale. The best way to minimize their damage is to detect the fire as quickly as possible before it has a chance to grow. Accordingly, this work looks into the potential of AI to detect and recognize fires and reduce detection time using object detection on an image stream. Object detection has made giant leaps in speed and accuracy over the last six years, making real-time detection feasible. To our end, we collected and labeled appropriate data from several public sources, which have been used to train and evaluate several models based on the popular YOLOv4 object detector. Our focus, driven by a collaborating industrial partner, is to implement our system in an industrial warehouse setting, which is characterized by high ceilings. A drawback of traditional smoke detectors in this setup is that the smoke has to rise to a sufficient height. The AI models brought forward in this research managed to outperform these detectors by a significant amount of time, providing precious anticipation that could help to minimize the effects of fires further., Comment: Accepted for publication at ICPRAM

We report on experiments for the fingerprint modality conducted during the First BioSecure Residential Workshop. Two reference systems for fingerprint verification have been tested together with two additional non-reference systems. These systems follow different approaches of fingerprint processing and are discussed in detail. Fusion experiments I volving different combinations of the available systems are presented. The experimental results show that the best recognition strategy involves both minutiae-based and correlation-based measurements. Regarding the fusion experiments, the best relative improvement is obtained when fusing systems that are based on heterogeneous strategies for feature extraction and/or matching. The best combinations of two/three/four systems always include the best individual systems whereas the best verification performance is obtained when combining all the available systems., Comment: Published at Annals of Telecommunications, Special Issue on Multimodal Biometrics

Signal-quality awareness has been found to increase recognition rates and to support decisions in multisensor environments significantly. Nevertheless, automatic quality assessment is still an open issue. Here, we study the orientation tensor of fingerprint images to quantify signal impairments, such as noise, lack of structure, blur, with the help of symmetry descriptors. A strongly reduced reference is especially favorable in biometrics, but less information is not sufficient for the approach. This is also supported by numerous experiments involving a simpler quality estimator, a trained method (NFIQ), as well as the human perception of fingerprint quality on several public databases. Furthermore, quality measurements are extensively reused to adapt fusion parameters in a monomodal multialgorithm fingerprint recognition environment. In this study, several trained and nontrained score-level fusion schemes are investigated. A Bayes-based strategy for incorporating experts past performances and current quality conditions, a novel cascaded scheme for computational efficiency, besides simple fusion rules, is presented. The quantitative results favor quality awareness under all aspects, boosting recognition rates and fusing differently skilled experts efficiently as well as effectively (by training)., Comment: Published at IEEE Transactions on Information Forensics and Security

As biometric technology is increasingly deployed, it will be common to replace parts of operational systems with newer designs. The cost and inconvenience of reacquiring enrolled users when a new vendor solution is incorporated makes this approach difficult and many applications will require to deal with information from different sources regularly. These interoperability problems can dramatically affect the performance of biometric systems and thus, they need to be overcome. Here, we describe and evaluate the ATVS-UAM fusion approach submitted to the quality-based evaluation of the 2007 BioSecure Multimodal Evaluation Campaign, whose aim was to compare fusion algorithms when biometric signals were generated using several biometric devices in mismatched conditions. Quality measures from the raw biometric data are available to allow system adjustment to changing quality conditions due to device changes. This system adjustment is referred to as quality-based conditional processing. The proposed fusion approach is based on linear logistic regression, in which fused scores tend to be log-likelihood-ratios. This allows the easy and efficient combination of matching scores from different devices assuming low dependence among modalities. In our system, quality information is used to switch between different system modules depending on the data source (the sensor in our case) and to reject channels with low quality data during the fusion. We compare our fusion approach to a set of rule-based fusion schemes over normalized scores. Results show that the proposed approach outperforms all the rule-based fusion schemes. We also show that with the quality-based channel rejection scheme, an overall improvement of 25% in the equal error rate is obtained., Comment: Published at IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans

Periocular recognition has gained attention recently due to demands of increased robustness of face or iris in less controlled scenarios. We present a new system for eye detection based on complex symmetry filters, which has the advantage of not needing training. Also, separability of the filters allows faster detection via one-dimensional convolutions. This system is used as input to a periocular algorithm based on retinotopic sampling grids and Gabor spectrum decomposition. The evaluation framework is composed of six databases acquired both with near-infrared and visible sensors. The experimental setup is complemented with four iris matchers, used for fusion experiments. The eye detection system presented shows very high accuracy with near-infrared data, and a reasonable good accuracy with one visible database. Regarding the periocular system, it exhibits great robustness to small errors in locating the eye centre, as well as to scale changes of the input image. The density of the sampling grid can also be reduced without sacrificing accuracy. Lastly, despite the poorer performance of the iris matchers with visible data, fusion with the periocular system can provide an improvement of more than 20%. The six databases used have been manually annotated, with the annotation made publicly available., Comment: Published at IET Biometrics

In this study the authors will look at the detection and segmentation of the iris and its influence on the overall performance of the iris-biometric tool chain. The authors will examine whether the segmentation accuracy, based on conformance with a ground truth, can serve as a predictor for the overall performance of the iris-biometric tool chain. That is: If the segmentation accuracy is improved will this always improve the overall performance? Furthermore, the authors will systematically evaluate the influence of segmentation parameters, pupillary and limbic boundary and normalisation centre (based on Daugman's rubbersheet model), on the rest of the iris-biometric tool chain. The authors will investigate if accurately finding these parameters is important and how consistency, that is, extracting the same exact region of the iris during segmenting, influences the overall performance., Comment: Published at IET Biometrics

The authors present a novel face tracking approach where optical flow information is incorporated into a modified version of the Viola Jones detection algorithm. In the original algorithm, detection is static, as information from previous frames is not considered. In addition, candidate windows have to pass all stages of the classification cascade, otherwise they are discarded as containing no face. In contrast, the proposed tracker preserves information about the number of classification stages passed by each window. Such information is used to build a likelihood map, which represents the probability of having a face located at that position. Tracking capabilities are provided by extrapolating the position of the likelihood map to the next frame by optical flow computation. The proposed algorithm works in real time on a standard laptop. The system is verified on the Boston Head Tracking Database, showing that the proposed algorithm outperforms the standard Viola Jones detector in terms of detection rate and stability of the output bounding box, as well as including the capability to deal with occlusions. The authors also evaluate two recently published face detectors based on convolutional networks and deformable part models with their algorithm showing a comparable accuracy at a fraction of the computation time., Comment: Published at IET Biometrics Journal

One of the challenges in virtual environments is the difficulty users have in interacting with these increasingly complex systems. Ultimately, endowing machines with the ability to perceive users emotions will enable a more intuitive and reliable interaction. Consequently, using the electroencephalogram as a bio-signal sensor, the affective state of a user can be modelled and subsequently utilised in order to achieve a system that can recognise and react to the user's emotions. This paper investigates features extracted from electroencephalogram signals for the purpose of affective state modelling based on Russell's Circumplex Model. Investigations are presented that aim to provide the foundation for future work in modelling user affect to enhance interaction experience in virtual environments. The DEAP dataset was used within this work, along with a Support Vector Machine and Random Forest, which yielded reasonable classification accuracies for Valence and Arousal using feature vectors based on statistical measurements and band power from the \'z, \b{eta}, \'z, and \'z\'z waves and High Order Crossing of the EEG signal., Comment: Published at Personal and Ubiquitous Computing Journal (PUC)

The role of soft biometrics to enhance person recognition systems in unconstrained scenarios has not been extensively studied. Here, we explore the utility of the following modalities: gender, ethnicity, age, glasses, beard, and moustache. We consider two assumptions: 1) manual estimation of soft biometrics and 2) automatic estimation from two commercial off-the-shelf systems (COTS). All experiments are reported using the labeled faces in the wild (LFW) database. First, we study the discrimination capabilities of soft biometrics standalone. Then, experiments are carried out fusing soft biometrics with two state-of-the-art face recognition systems based on deep learning. We observe that soft biometrics is a valuable complement to the face modality in unconstrained scenarios, with relative improvements up to 40%/15% in the verification performance when using manual/automatic soft biometrics estimation. Results are reproducible as we make public our manual annotations and COTS outputs of soft biometrics over LFW, as well as the face recognition scores., Comment: Published at IEEE Transactions on Information Forensics and Security

The use of low-resolution images adopting more relaxed acquisition conditions such as mobile phones and surveillance videos is becoming increasingly common in iris recognition nowadays. Concurrently, a great variety of single image super-resolution techniques are emerging, especially with the use of convolutional neural networks (CNNs). The main objective of these methods is to try to recover finer texture details generating more photo-realistic images based on the optimisation of an objective function depending basically on the CNN architecture and training approach. In this work, the authors explore single image super-resolution using CNNs for iris recognition. For this, they test different CNN architectures and use different training databases, validating their approach on a database of 1.872 near infrared iris images and on a mobile phone image database. They also use quality assessment, visual results and recognition experiments to verify if the photo-realism provided by the CNNs which have already proven to be effective for natural images can reflect in a better recognition rate for iris recognition. The results show that using deeper architectures trained with texture databases that provide a balance between edge preservation and the smoothness of the method can lead to good results in the iris recognition process., Comment: Published at IET Biometrics

Several works related to information fusion for signature verification have been presented. However, few works have focused on sensor fusion and sensor interoperability. In this paper, these two topics are evaluated for signature verification using two different commercial Tablet PCs. An enrolment strategy using signatures from the two Tablet PCs is also proposed. Authentication performance experiments are reported by using a database with over 3000 signatures., Comment: Published at Intl. Workshop on Biometric Recognition Systems, IWBRS 2005

On-line signature verification for Tablet PC devices is studied. The on-line signature verification algorithm presented by the authors at the First International Signature Verification Competition (SVC 2004) is adapted to work in Tablet PC environments. An example prototype of securing access and securing document application using this Tablet PC system is also reported. Two different commercial Tablet PCs are evaluated, including information of interest for signature verification systems such as sampling and pressure statistics. Authentication performance experiments are reported considering both random and skilled forgeries by using a new database with over 3000 signatures., Comment: Published at 4th International Symposium on Image and Signal Processing and Analysis, ISPA 2005

Several recent works have addressed the ability of deep learning to disclose rich, hierarchical and discriminative models for the most diverse purposes. Specifically in the super-resolution field, Convolutional Neural Networks (CNNs) using different deep learning approaches attempt to recover realistic texture and fine grained details from low resolution images. In this work we explore the viability of these approaches for iris Super-Resolution (SR) in an iris recognition environment. For this, we test different architectures with and without a so called image re-projection to reduce artifacts applying it to different iris databases to verify the viability of the different CNNs for iris super-resolution. Results show that CNNs and image re-projection can improve the results specially for the accuracy of recognition systems using a complete different training database performing the transfer learning successfully., Comment: Published at IEEE International Conference on Identity, Security and Behavior Analysis, ISBA 2019

In this work, we present a new single-stage method for subject agnostic face swapping and identity transfer, named FaceDancer. We have two major contributions: Adaptive Feature Fusion Attention (AFFA) and Interpreted Feature Similarity Regularization (IFSR). The AFFA module is embedded in the decoder and adaptively learns to fuse attribute features and features conditioned on identity information without requiring any additional facial segmentation process. In IFSR, we leverage the intermediate features in an identity encoder to preserve important attributes such as head pose, facial expression, lighting, and occlusion in the target face, while still transferring the identity of the source face with high fidelity. We conduct extensive quantitative and qualitative experiments on various datasets and show that the proposed FaceDancer outperforms other state-of-the-art networks in terms of identityn transfer, while having significantly better pose preservation than most of the previous methods., Comment: Fixed the supplementary material layout in the end (past references). Added link to video results, which is mentioned in Results but was missing in the supplementary material

In this paper, we present a new approach for periocular recognition based on the Symmetry Assessment by Feature Expansion (SAFE) descriptor, which encodes the presence of various symmetric curve families around image key points. We use the sclera center as single key point for feature extraction, highlighting the object-like identity properties that concentrates to this unique point of the eye. As it is demonstrated, such discriminative properties can be encoded with a reduced set of symmetric curves. Experiments are done with a database of periocular images captured with a digital camera. We test our system against reference periocular features, achieving top performance with a considerably smaller feature vector (given by the use of a single key point). All the systems tested also show a nearly steady correlation between acquisition distance and performance, and they are also able to cope well when enrolment and test images are not captured at the same distance. Fusion experiments among the available systems are also provided., Comment: Published at IEEE/IAPR Intl Conf on Pattern Recognition, ICPR 2016

Current research in iris recognition is moving towards enabling more relaxed acquisition conditions. This has effects on the quality of acquired images, with low resolution being a predominant issue. Here, we evaluate a super-resolution algorithm used to reconstruct iris images based on Eigen-transformation of local image patches. Each patch is reconstructed separately, allowing better quality of enhanced images by preserving local information. Contrast enhancement is used to improve the reconstruction quality, while matcher fusion has been adopted to improve iris recognition performance. We validate the system using a database of 1,872 near-infrared iris images. The presented approach is superior to bilinear or bicubic interpolation, especially at lower resolutions, and the fusion of the two systems pushes the EER to below 5% for down-sampling factors up to a image size of only 13x13., Comment: Published at Intl Conf on Biometrics: Theory, Apps and Systems, BTAS 2016

In this survey, we provide a comprehensive review of more than 200 papers, technical reports, and GitHub repositories published over the last 10 years on the recent developments of deep learning techniques for iris recognition, covering broad topics on algorithm designs, open-source tools, open challenges, and emerging research. First, we conduct a comprehensive analysis of deep learning techniques developed for two main sub-tasks in iris biometrics: segmentation and recognition. Second, we focus on deep learning techniques for the robustness of iris recognition systems against presentation attacks and via human-machine pairing. Third, we delve deep into deep learning techniques for forensic application, especially in post-mortem iris recognition. Fourth, we review open-source resources and tools in deep learning techniques for iris recognition. Finally, we highlight the technical challenges, emerging research trends, and outlook for the future of deep learning in iris recognition.

Fingerprint image quality affects heavily the performance of fingerprint recognition systems. This paper reviews existing approaches for fingerprint image quality computation. We also implement, test and compare a selection of them using the MCYT database including 9000 fingerprint images. Experimental results show that most of the algorithms behave similarly., Comment: Published at 3rd COST-275 Workshop on Biometrics on the Internet. arXiv admin note: text overlap with arXiv:2111.07432

The effect of image quality degradation on the verification performance of automatic fingerprint recognition is investigated. We study the performance of two fingerprint matchers based on minutiae and ridge information under varying fingerprint image quality. The ridge-based system is found to be more robust to image quality degradation than the minutiae-based system for a number of different image quality criteria., Comment: Published at IEEE International Carnahan Conference on Security Technology (ICCST)

A new method to generate gummy fingers is presented. A medium-size fake fingerprint database is described and two different fingerprint verification systems are evaluated on it. Three different scenarios are considered in the experiments, namely: enrollment and test with real fingerprints, enrollment and test with fake fingerprints, and enrollment with real fingerprints and test with fake fingerprints. Results for an optical and a thermal sweeping sensors are given. Both systems are shown to be vulnerable to direct attacks., Comment: Published at IEEE International Carnahan Conference on Security Technology (ICCST)

A new fingerprint parameterization for liveness detection based on quality measures is presented. The novel feature set is used in a complete liveness detection system and tested on the development set of the LivDET competition, comprising over 4,500 real and fake images acquired with three different optical sensors. The proposed solution proves to be robust to the multi-sensor scenario, and presents an overall rate of 93% of correctly classified samples. Furthermore, the liveness detection method presented has the added advantage over previously studied techniques of needing just one image from a finger to decide whether it is real or fake., Comment: Published at IEEE International Conference on Biometrics, Identity and Security (BIdS). arXiv admin note: substantial text overlap with arXiv:2111.01898

Automatic detection of flying drones is a key issue where its presence, especially if unauthorized, can create risky situations or compromise security. Here, we design and evaluate a multi-sensor drone detection system. In conjunction with standard video cameras and microphone sensors, we explore the use of thermal infrared cameras, pointed out as a feasible and promising solution that is scarcely addressed in the related literature. Our solution integrates a fish-eye camera as well to monitor a wider part of the sky and steer the other cameras towards objects of interest. The sensing solutions are complemented with an ADS-B receiver, a GPS receiver, and a radar module. However, our final deployment has not included the latter due to its limited detection range. The thermal camera is shown to be a feasible solution as good as the video camera, even if the camera employed here has a lower resolution. Two other novelties of our work are the creation of a new public dataset of multi-sensor annotated data that expands the number of classes compared to existing ones, as well as the study of the detector performance as a function of the sensor-to-target distance. Sensor fusion is also explored, showing that the system can be made more robust in this way, mitigating false detections of the individual sensors., Comment: Under consideration at Drones

The lack of resolution has a negative impact on the performance of image-based biometrics. Many applications which are becoming ubiquitous in mobile devices do not operate in a controlled environment, and their performance significantly drops due to the lack of pixel resolution. While many generic super-resolution techniques have been studied to restore low-resolution images for biometrics, the results obtained are not always as desired. Those generic methods are usually aimed to enhance the visual appearance of the scene. However, producing an overall visual enhancement of biometric images does not necessarily correlate with a better recognition performance. Such techniques are designed to restore generic images and therefore do not exploit the specific structure found in biometric images (e.g. iris or faces), which causes the solution to be sub-optimal. For this reason, super-resolution techniques have to be adapted for the particularities of images from a specific biometric modality. In recent years, there has been an increased interest in the application of super-resolution to different biometric modalities, such as face iris, gait or fingerprint. This chapter presents an overview of recent advances in super-resolution reconstruction of face and iris images, which are the two prevalent modalities in selfie biometrics. We also provide experimental results using several state-of-the-art reconstruction algorithms, demonstrating the benefits of using super-resolution to improve the quality of face and iris images prior to classification. In the reported experiments, we study the application of super-resolution to face and iris images captured in the visible range, using experimental setups that represent well the selfie biometrics scenario., Comment: Published at Springer book on "Selfie Biometrics" (A Rattani, R. Derakhshani, A. Ross, Eds.), pp. 105-128, Springer 2019, ISBN 978-3-030-26972-2

Imaging using millimeter waves (mmWs) has many advantages including the ability to penetrate obscurants such as clothes and polymers. After having explored shape information retrieved from mmW images for person recognition, in this work we aim to gain some insight about the potential of using mmW texture information for the same task, considering not only the mmW face, but also mmW torso and mmW wholebody. We report experimental results using the mmW TNO database consisting of 50 individuals based on both hand-crafted and learned features from Alexnet and VGG-face pretrained Convolutional Neural Networks (CNN) models. First, we analyze the individual performance of three mmW body parts, concluding that: i) mmW torso region is more discriminative than mmW face and the whole body, ii) CNN features produce better results compared to hand-crafted features on mmW faces and the entire body, and iii) hand-crafted features slightly outperform CNN features on mmW torso. In the second part of this work, we analyze different multi-algorithmic and multi-modal techniques, including a novel CNN-based fusion technique, improving verification results to 2% EER and identification rank-1 results up to 99%. Comparative analyses with mmW body shape information and face recognition in the visible and NIR spectral bands are also reported., Comment: Published at IEEE Transactions on Biometrics, Behavior, and Identity Science

The lack of resolution has a negative impact on the performance of image-based biometrics. While many generic super-resolution methods have been proposed to restore low-resolution images, they usually aim to enhance their visual appearance. However, a visual enhancement of biometric images does not necessarily correlate with a better recognition performance. Reconstruction approaches need thus to incorporate specific information from the target biometric modality to effectively improve recognition. This paper presents a comprehensive survey of iris super-resolution approaches proposed in the literature. We have also adapted an Eigen-patches reconstruction method based on PCA Eigen-transformation of local image patches. The structure of the iris is exploited by building a patch-position dependent dictionary. In addition, image patches are restored separately, having their own reconstruction weights. This allows the solution to be locally optimized, helping to preserve local information. To evaluate the algorithm, we degraded high-resolution images from the CASIA Interval V3 database. Different restorations were considered, with 15x15 pixels being the smallest resolution. To the best of our knowledge, this is among the smallest resolutions employed in the literature. The framework is complemented with six public iris comparators, which were used to carry out biometric verification and identification experiments. Experimental results show that the proposed method significantly outperforms both bilinear and bicubic interpolation at very low-resolution. The performance of a number of comparators attains an impressive Equal Error Rate as low as 5%, and a Top-1 accuracy of 77-84% when considering iris images of only 15x15 pixels. These results clearly demonstrate the benefit of using trained super-resolution techniques to improve the quality of iris images prior to matching., Comment: Published at IEEE Access

Selfie images enjoy huge popularity in social media. The same platforms centered around sharing this type of images offer filters to beautify them or incorporate augmented reality effects. Studies suggests that filtered images attract more views and engagement. Selfie images are also in increasing use in security applications due to mobiles becoming data hubs for many transactions. Also, video conference applications, boomed during the pandemic, include such filters. Such filters may destroy biometric features that would allow person recognition or even detection of the face itself, even if such commodity applications are not necessarily used to compromise facial systems. This could also affect subsequent investigations like crimes in social media, where automatic analysis is usually necessary given the amount of information posted in social sites or stored in devices or cloud repositories. To help in counteracting such issues, we contribute with a database of facial images that includes several manipulations. It includes image enhancement filters (which mostly modify contrast and lightning) and augmented reality filters that incorporate items like animal noses or glasses. Additionally, images with sunglasses are processed with a reconstruction network trained to learn to reverse such modifications. This is because obfuscating the eye region has been observed in the literature to have the highest impact on the accuracy of face detection or recognition. We start from the popular Labeled Faces in the Wild (LFW) database, to which we apply different modifications, generating 8 datasets. Each dataset contains 4,324 images of size 64 x 64, with a total of 34,592 images. The use of a public and widely employed face dataset allows for replication and comparison. The created database is available at https://github.com/HalmstadUniversityBiometrics/LFW-Beautified, Comment: Under consideration at Elsevier Data in Brief

We describe a technical solution implemented at Halmstad University to automatise assessment and reporting of results of paper-based quiz exams. Paper quizzes are affordable and within reach of campus education in classrooms. Offering and taking them is accepted as they cause fewer issues with reliability and democratic access, e.g. a large number of students can take them without a trusted mobile device, internet, or battery. By contrast, correction of the quiz is a considerable obstacle. We suggest mitigating the issue by a novel image processing technique using harmonic spirals that aligns answer sheets in sub-pixel accuracy to read student identity and answers and to email results within minutes, all fully automatically. Using the described method, we carry out regular weekly examinations in two master courses at the mentioned centre without a significant workload increase. The employed solution also enables us to assign a unique identifier to each quiz (e.g. week 1, week 2. . . ) while allowing us to have an individualised quiz for each student., Comment: Accepted at 13th IEEE Global Engineering Education Conference, EDUCON, Tunis, Tunisia, 28-31 March 2022 (Educational Conference)

Block characters are often used when filling paper forms for a variety of purposes. We investigate if there is biometric information contained within individual digits of handwritten text. In particular, we use personal identity numbers consisting of the six digits of the date of birth, DoB. We evaluate two recognition approaches, one based on handcrafted features that compute contour directional measurements, and another based on deep features from a ResNet50 model. We use a self-captured database of 317 individuals and 4920 written DoBs in total. Results show the presence of identity-related information in a piece of handwritten information as small as six digits with the DoB. We also analyze the impact of the amount of enrolment samples, varying its number between one and ten. Results with such small amount of data are promising. With ten enrolment samples, the Top-1 accuracy with deep features is around 94%, and reaches nearly 100% by Top-10. The verification accuracy is more modest, with EER>20%with any given feature and enrolment set size, showing that there is still room for improvement., Comment: Accepted for publication at IEEE International Workshop on Biometrics and Forensics IWBF 2022

Biometric technology has been increasingly deployed in the past decade, offering greater security and convenience than traditional methods of personal recognition. Although biometric signals' quality heavily affects a biometric system's performance, prior research on evaluating quality is limited. Quality is a critical issue in security, especially in adverse scenarios involving surveillance cameras, forensics, portable devices, or remote access through the Internet. This article analyzes what factors negatively impact biometric quality, how to overcome them, and how to incorporate quality measures into biometric systems. A review of the state of the art in these matters gives an overall framework for the challenges of biometric quality., Comment: Published at IEEE Security & Privacy journal