Search

The great expansion in offshore power plants is raising the concern regarding the cumulative effect of the electromagnetic field emissions caused by submarine power cables. In this sense, owners are required to predict these emissions during the permitting and consenting process of new power plants. This is a challenging task, especially in the case of HVAC three-core armored cables due to their complex geometry. Customarily, 2D approaches based on the finite element method (FEM) have been employed for evaluating the magnetic field emissions caused by these cables. However, inaccurate results are obtained since the phase conductors and armor twisting is omitted. This work develops, for the first time in the literature, an in-depth analysis of the magnetic field caused by this type of cable through an ultra-shortened 3D-FEM model, which is also faced to experimental measurements taken on an actual 132 kV, 800 mm2 three-core armored cable. Relevant conclusions are derived regarding the impact of the cable design on the magnetic field emissions, including material properties, as well as single and double-layer armors, presenting the proposed model not only as a valuable tool for predicting purposes, but also for optimizing cable design in terms of magnetic field emissions.

Loss allocation of the three different components (conductor, sheaths and armor) of solidly bonded three-core separated lead-sheathed armored cables, frequently employed in offshore wind farms, is challenging due to the lack of accurate enough analytical expressions in the IEC standard. Also, loss allocation through experimental tests leads to inaccurate results since it is based on questionable assumptions. This paper improves both the IEC formulae and experimental methods by means of different analytical corrections in the conductor and sheath loss expressions. To this aim, an ad hoc application interface (Virtual Lab) based on 3D numerical simulations (finite element method) has been developed. This tool virtualizes and automates different test setups to emulate, in few seconds, the most employed experimental procedures in this type of cable. The analytical corrections have been derived from an in-depth analysis of a first set of 368 cables, ranging from 30 to 275 kV. The new loss expressions were successfully applied to a second set of 645 armored cables of quite diverse features (voltages from 10 to 275 kV, sections and dimensional parameters), hence bringing a general framework for any kind of three-core armored cable.

Due to recent advances, the numerical analysis of submarine three-core armored cables can nowadays be developed through the finite element method (FEM) in a small slice of the cable. This strongly reduces the computational burden and simulation time. However, the performance of this ultra-shortened 3D-FEM model is still to be fully assessed with experimental measurements. This paper focuses on this validation for an extensive variety of situations through the experimental measurements available in the specialized literature for up to 10 actual cables. In particular, it deals not only with relevant calculations at power frequency, like the series resistance and inductive reactance or the induced sheath current, but also with other aspects never analyzed before through 3D-FEM simulations, such as the zero sequence impedance, the magnetic field distribution around the power cable, as well as side effects due to the nonlinear properties of the armor wires. All this considering different armoring and sheath bonding configurations. Results show a very good agreement between measured and computed values, presenting the ultra-shortened 3D-FEM model as a suitable tool for the analysis and design of three-core armored cables, and opening the possibility to reduce the need of extensive experimental tests in the design stage of new cables.

Recently, large offshore wind power plants have been installed far from the shore, using long HVAC three-core armored cables to export power. Its high capacitance may contribute to the appearance of unwanted phenomena, such as overvoltages or resonances at low frequencies. To adequately assess these problems, detailed and reliable cable models are required to develop time-domain/frequency-domain analyses on this type of cables. This paper presents, for the first time in the literature, an assessment on the performance of 3D finite element method-based (3D-FEM) models for developing frequency-domain analyses on three-core armored cables, confronting simulation results with experimental measurements found in the literature for three real cables. To this aim, a simplified ultra-shortened 3D-FEM model is proposed to reduce the simulation time during frequency sweeps, through which relevant aspects never analyzed before with frequency-domain 3D-FEM simulations are addressed, such as total losses, induced sheath current, magnetic field around the power cable, positive and zero sequence harmonic impedances, as well as resonant frequencies. Also, a time-domain example derived from the frequency-domain analysis is provided. Remarkable results are obtained when comparing computed values and measurements, presenting the simplified ultra-shortened 3DFEM model as a valuable tool for the frequency-domain analysis of these cables.

This paper analyzes different ways to simulate electromagnetically three-core armored cables in 3D by means of the finite element method. Full periodic models, as lengthy as 36 m, are developed to evaluate the accuracy when simulating only a small portion of the cable, as commonly employed in the literature. The adequate length and boundary conditions for having the same accuracy of full periodic models are also studied. To this aim, five medium voltage and high voltage armored cables are analyzed, obtaining the minimum length of the cable that may be simulated for having accurate results in shorter time and with less computational burden. This also results in the proposal of a new method comprising the advantages of short geometries and the applicability of periodic boundary conditions. Its accuracy is compared with experimental measurements and the IEC standard for 145 kV and 245 kV cables. The results show a very good agreement between simulations and measurements (errors below 4 %), obtaining a reduction in the computation time of about 90 %. This new method brings a more effective tool for saving time and computational resources in cable design and the development of new analytical expressions for improving the IEC standard.

Increasing reuse opportunities is a well-known problem for software designers as well as for hardware designers. Nonetheless, current software and hardware engineering practices have embraced different approaches to this problem. Software designs are usually modelled after a set of proven solutions to recurrent problems called design patterns. This approach differs from the component-based reuse usually found in hardware designs: design patterns do not specify unnecessary implementation details. Several authors have already proposed translating structural design patterns concepts to hardware design. In this paper we extend the discussion to behavioural design patterns. Specifically, we describe how the hardware version of the Iterator can be used to enhance model reuse., Comment: Submitted on behalf of EDAA (http://www.edaa.com/)

Rosetta is an international mission led by the European Space Agency (ESA) with key support and instrumentation from the National Aeronautics and Space Administration (NASA). Rosetta is currently on a ten-year mission to catch comet 67P/Churyumov-Gerasimenko (C-G); throughout its voyage, the spacecraft has performed flybys of two main belt asteroids (MBA): Steins and Lutetia. Data on the physical, chemical, and geological properties of these asteroids are currently being processed and analyzed. Accurate interpretation of such data is fundamental in the success of Rosetta's mission and overall objectives. Post-flyby data analyses strive to correlate the size, shape, volume, and rotational rate of Lutetia, in addition to interpreting its multi-color imagining, albedo, and spectral mapping. Although advancements in science have contributed to the examination of celestial bodies, methods to analyze asteroids remain largely empirical, not semi-empirical, nor ab initio. This study aims to interpret and document the scientific methods currently utilized in the characterization of asteroid (21) Lutetia in order to render these processes and methods accessible to the public. Examples include a standardized technique for assessing the age of an asteroid surface, complete with clickable reference maps, methodology of grouping surface characteristics together, and a standardized power law equation for the age. Other examples include determining the density of an object. Context for what both density and age mean is a bi-product of this study. Results of the study will aid in the development of pedagogical material on asteroids for public use, and in creation of an academic database for selected targets that might be used as a reference.