Search

Gravitational-wave (GW) detections of electromagnetically bright compact binary coalescences can provide an independent measurement of the Hubble constant $H_0$. In order to obtain a measurement that could help arbitrating the existing tension on $H_0$, one needs to fully understand any source of systematic biases for this approach. In this study, we aim at understanding the impact of instrumental calibration errors (CEs) and uncertainties on luminosity distance measurements, $D_L$, and the inferred $H_0$ results. We simulate binary neutron star mergers (BNSs), as detected by a network of Advanced LIGO and Advanced Virgo interferometers at their design sensitivity. We artificially add CEs equal to exceptionally large values experienced in LIGO-Virgo's third observing run (O3). We find that for individual BNSs at a network signal-to-noise ratio of 50, the systematic errors on $D_L$ - and hence $H_0$ - are still smaller than the statistical uncertainties. The biases become more significant when we combine multiple events to obtain a joint posterior on $H_0$. In the rather unrealistic case that the data around each detection is affected by the same CEs corresponding to the worst offender of O3, the true $H_0$ value would be excluded from the 90% credible interval after $\sim40$ sources. If instead 10% of the sources suffer from severe CEs, the true value of $H_0$ is included in the 90% credible interval even after we combine 100 sources., Comment: 12 pages, 11 figures, 2 tables

The workshop Dawn VI: Next Generation Observatories took place online over three days, 5-7 October, 2021. More than 200 physicists and astronomers attended to contribute to, and learn from, a discussion of next-generation ground-based gravitational-wave detectors. The program was centered on the next generation of ground-based gravitational-wave observatories and their synergy with the greater landscape of scientific observatories of the 2030s. Cosmic Explorer (CE), a concept developed with US National Science Foundation support, was a particular focus; Einstein Telescope (ET), the European next generation concept, is an important complement and partner in forming a network. The concluding summary of the meeting expressed the sentiment that the observational science accessible to CE and ET, also in combination with data from other non-GW observatories, will stimulate a very broad community of analysts and yield insights which are exciting given the access to GWs from the entire universe. The need, and desire, for closer collaboration between ET and CE was expressed; a three-detector network is optimal for delivering much of the science. The science opportunities afforded by CE and ET are broad and compelling, impacting a wide range of disciplines in physics and high energy astrophysics. There was a consensus that CE is a concept that can deliver the promised science. A strong endorsement of Cosmic Explorer, as described in the CE Horizon Study, is a primary outcome of DAWN VI., Comment: Proceedings of the Dawn VI workshop

This Horizon Study describes a next-generation ground-based gravitational-wave observatory: Cosmic Explorer. With ten times the sensitivity of Advanced LIGO, Cosmic Explorer will push gravitational-wave astronomy towards the edge of the observable universe ($z \sim 100$). The goals of this Horizon Study are to describe and evaluate design concepts for Cosmic Explorer; to plan for the United States' leadership in gravitational-wave astronomy; and to envisage the role of Cosmic Explorer in the international effort to build a "Third-Generation" (3G) observatory network that will make discoveries transformative across astronomy, physics, and cosmology., Comment: 173 pages

The precise calibration of the strain readout of the LIGO gravitational wave observatories is paramount to the accurate interpretation of gravitational wave events. This calibration is traditionally done by imparting a known force on the test masses of the observatory via radiation pressure. Here we describe the implementation of an alternative calibration scheme: the Newtonian Calibrator. This system uses a rotor consisting of both quadrupole and hexapole mass distributions to apply a time-varying gravitational force on one of the observatory's test masses. The force produced by this rotor can be predicted to $<1\%$ relative uncertainty and is well-resolved in the readout of the observatory. This system currently acts as a cross-check of the existing absolute calibration system.

The data from ground based gravitational-wave detectors such as Advanced LIGO and Virgo must be calibrated to convert the digital output of photodetectors into a relative displacement of the test masses in the detectors, producing the quantity of interest for inference of astrophysical gravitational wave sources. Both statistical uncertainties and systematic errors are associated with the calibration process, which would in turn affect the analysis of detected sources, if not accounted for. Currently, source characterization algorithms either entirely neglect the possibility of calibration uncertainties or account for them in a way that does not use knowledge of the calibration process itself. We present physiCal, a new approach to account for calibration errors during the source characterization step, which directly uses all the information available about the instrument calibration process. Rather than modeling the overall detector's response function, we consider the individual components that contribute to the response. We implement this method and apply it to the compact binaries detected by LIGO and Virgo during the second observation run, as well as to simulated binary neutron stars for which the sky position and distance are known exactly. We find that the physiCal model performs as well as the method currently used within the LIGO-Virgo collaboration, but additionally it enables improving the measurement of specific components of the instrument control through astrophysical calibration., Comment: 10 pages, 4 figures

We present a tabletop six-axis vibration isolation system, compatible with Ultra-High Vacuum (UHV), which is actively damped and provides 25 dB of isolation at 10 Hz and 65 dB at 100 Hz. While this isolation platform has been primarily designed to support optics in the Laser Interferometer Gravitational-Wave Observatory (LIGO) detectors, it is suitable for a variety of applications. The system has been engineered to facilitate the construction and assembly process, while minimizing cost. The platform provides passive isolation for six degrees of freedom using a combination of vertical springs and horizontal pendula. It is instrumented with voice-coil actuators and optical shadow sensors to damp the resonances. All materials are compatible with stringent vacuum requirements. Thanks to its architecture, the system's footprint can be adapted to meet spatial requirements, while maximizing the dimensions of the optical table. Three units are currently operating for LIGO. We present the design of the system, controls principle, and experimental results.

Blip glitches are short noise transients present in data from ground-based gravitational-wave observatories. These glitches resemble the gravitational-wave signature of massive binary black hole mergers. Hence, the sensitivity of transient gravitational-wave searches to such high-mass systems and other potential short duration sources is degraded by the presence of blip glitches. The origin and rate of occurrence of this type of glitch have been largely unknown. In this paper we explore the population of blip glitches in Advanced LIGO during its first and second observing runs. On average, we find that Advanced LIGO data contains approximately two blip glitches per hour of data. We identify four subsets of blip glitches correlated with detector auxiliary or environmental sensor channels, however the physical causes of the majority of blips remain unclear.

Calibration of the Advanced LIGO detectors is the quantification of the detectors' response to gravitational waves. Gravitational waves incident on the detectors cause phase shifts in the interferometer laser light which are read out as intensity fluctuations at the detector output. Understanding this detector response to gravitational waves is crucial to producing accurate and precise gravitational wave strain data. Estimates of binary black hole and neutron star parameters and tests of general relativity require well-calibrated data, as miscalibrations will lead to biased results. We describe the method of producing calibration uncertainty estimates for both LIGO detectors in the first and second observing runs., Comment: 15 pages, 21 figures, LIGO DCC P1600139