Search

The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest for the faint signal of the primordial B-modes. A unique feature is the so-called "spectral imaging", i.e., the ability to recover the sky signal in several sub-bands within the physical band during data analysis. This feature provides an in-band spectral resolution of \Delta{\nu}/{\nu} \sim 0.04 that is unattainable by a traditional imager. This is a key tool for controlling the Galactic foregrounds contamination. In this paper, we describe the principles of bolometric interferometry, the current status of the QUBIC experiment and future prospects., Comment: To appear in Proc. of the mm Universe 2023 conference, Grenoble (France), June 2023, published by F. Mayet et al. (Eds), EPJ Web of conferences, EDP Sciences

This series of briefs draws on the findings of multi-country research based on first-hand migration experiences of 1,634 children and young people moving between Somalia, Ethiopia, Sudan and Egypt (available at www.unicef-irc.org/child-migration-hoa). The briefs highlight findings that can inform decision makers when designing child-sensitive solutions for children on the move (COM), in line with relevant objectives of the Global Compact for Safe, Orderly and Regular Migration (GCM). This third brief in the series presents vulnerability, discrimination and xenophobia. [For Brief 1, see ED620508. For Brief 2, see ED620510.]

This series of briefs draws on the findings of multi-country research based on first-hand migration experiences of 1,634 children and young people moving between Somalia, Ethiopia, Sudan and Egypt1 (available at www.unicef-irc.org/child-migration-hoa). The briefs highlight findings that can inform decision makers when designing child-sensitive solutions for children on the move (COM), in line with relevant objectives of the Global Compact for Safe, Orderly and Regular Migration (GCM). This second brief presents access to basic services. [For Brief 1, see ED620508. For Brief 3, see ED620509.]

This series of briefs draws on the findings of multi-country research based on first-hand migration experiences of 1,634 children and young people moving between Somalia, Ethiopia, Sudan and Egypt1 (available at www.unicef-irc.org/child-migration-hoa). The briefs highlight findings that can inform decision makers when designing child-sensitive solutions for children on the move (COM), in line with relevant objectives of the Global Compact for Safe, Orderly and Regular Migration (GCM). This first brief in the series presents strengthening child protection systems and ending child immigration detention. [For Brief 2, see ED620510. For Brief 3, see ED620509.]

The Q&U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Back-ground (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematics with those of bolometric detectors in terms of wide-band, background-limited sensitivity., Comment: Contribution to the 2022 Cosmology session of the 33rd Rencontres de Blois. arXiv admin note: substantial text overlap with arXiv:2203.08947

A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are controlled and amplified by an SiGe application specific integrated circuit at 40 K. We report the performance of this readout chain and the characterization of the TES. The readout system has been functionally tested and characterized in the lab and in QUBIC. The low noise amplifier demonstrated a white noise level of 0.3 nV.Hz^-0.5. Characterizations of the QUBIC detectors and readout electronics includes the measurement of I-V curves, time constant and the noise equivalent power. The QUBIC TES bolometer array has approximately 80% detectors within operational parameters. It demonstrated a thermal decoupling compatible with a phonon noise of about 5.10^-17 W.Hz^-0.5 at 410 mK critical temperature. While still limited by microphonics from the pulse tubes and noise aliasing from readout system, the instrument noise equivalent power is about 2.10^-16 W.Hz^-0.5, enough for the demonstration of bolometric interferometry., Comment: Accepted for publication in JCAP

The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematic effects with those of bolometric detectors in terms of wide-band, background-limited sensitivity. The QUBIC synthesized beam has a frequency-dependent shape that results in the ability to produce maps of the CMB polarization in multiple sub-bands within the two physical bands of the instrument (150 and 220 GHz). These features make QUBIC complementary to other instruments and makes it particularly well suited to characterize and remove Galactic foreground contamination. In this article, first of a series of eight, we give an overview of the QUBIC instrument design, the main results of the calibration campaign, and present the scientific program of QUBIC including not only the measurement of primordial B-modes, but also the measurement of Galactic foregrounds. We give forecasts for typical observations and measurements: with three years of integration on the sky and assuming perfect foreground removal as well as stable atmospheric conditions from our site in Argentina, our simulations show that we can achieve a statistical sensitivity to the effective tensor-to-scalar ratio (including primordial and foreground B-modes) $\sigma(r)=0.015$., Comment: 34 pages, 16 figures, accepted for publication by JCAP. Overview paper for a series of 8 QUBIC articles special JCAP edition dedicated to QUBIC

Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foregrounds. In this paper, the methodology is illustrated with examples based on the Q \& U Bolometric Interferometer for Cosmology (QUBIC) which is a ground-based instrument designed to measure the B-mode polarization of the sky at millimeter wavelengths. We consider the specific cases of point source reconstruction and Galactic dust mapping and we characterize the point spread function as a function of frequency. We study the noise properties of spectral imaging, especially the correlations between sub-bands, using end-to-end simulations together with a fast noise simulator. We conclude showing that spectral imaging performance are nearly optimal up to five sub-bands in the case of QUBIC., Comment: 27 pages, 18 figures. Accepted by JCAP on July 6, 2021. Second paper of series of 8 in a special JCAP edition on QUBIC

We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration. We manufactured the horns in aluminum platelets milled by photo-chemical etching and mechanically tightened with screws. The switches are based on steel blades that open and close the wave-guide between the back-to-back horns and are operated by miniaturized electromagnets. We also show the current development status of the feedhorn-switch system for the QUBIC full instrument, based on an array of 400 horn-switch assemblies., Comment: 30 pages, 28 figures. Accepted for submission to JCAP

Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the mapping speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interferometer for Cosmology) experiment: we describe its design, fabrication, experimental optimization and validation in the Technological Demonstrator configuration. The QUBIC cryogenic system is based on a large volume cryostat, using two pulse-tube refrigerators to cool at ~3K a large (~1 m^3) volume, heavy (~165kg) instrument, including the cryogenic polarization modulator, the corrugated feedhorns array, and the lower temperature stages; a 4He evaporator cooling at ~1K the interferometer beam combiner; a 3He evaporator cooling at ~0.3K the focal-plane detector arrays. The cryogenic system has been tested and validated for more than 6 months of continuous operation. The detector arrays have reached a stable operating temperature of 0.33K, while the polarization modulator has been operated from a ~10K base temperature. The system has been tilted to cover the boresight elevation range 20 deg -90 deg without significant temperature variations. The instrument is now ready for deployment to the high Argentinean Andes., Comment: This is one of a series of papers on the QUBIC experiment status - This version of the paper matches the one accepted for publication on Journal of Cosmology and Astroparticle Physics

Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used technique is the Stokes Polarimetry that uses a rotating half-wave plate (HWP) and a linear polarizer to separate and modulate the polarization components with low residual cross-polarization. This paper describes the QUBIC Stokes Polarimeter highlighting its design features and its performances. A common systematic with these devices is the generation of large spurious signals synchronous with the rotation and proportional to the emissivity of the optical elements. A key feature of the QUBIC Stokes Polarimeter is to operate at cryogenic temperature in order to minimize this unwanted component. Moving efficiently this large optical element at low temperature constitutes a big engineering challenge in order to reduce friction power dissipation. Big attention has been given during the designing phase to minimize the differential thermal contractions between parts. The rotation is driven by a stepper motor placed outside the cryostat to avoid thermal load dissipation at cryogenic temperature. The tests and the results presented in this work show that the QUBIC polarimeter can easily achieve a precision below 0.1{\deg} in positioning simply using the stepper motor precision and the optical absolute encoder. The rotation induces only few mK of extra power load on the second cryogenic stage (~ 8 K)., Comment: Part of a series of 8 papers on QUBIC to be submitted to a special issue of JCAP

The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or planned experiments using the novel technique of bolometric interferometry. This technique takes advantage of the sensitivity of an imager and the systematic error control of an interferometer. A cold reflective optical combiner superimposes there-emitted beams from 400 aperture feedhorns on two focal planes. A shielding system composedof a fixed groundshield, and a forebaffle that moves with the instrument, limits the impact of local contaminants. The modelling, design, manufacturing and preliminary measurements of the optical components are described in this paper., Comment: Part of a series of 8 papers on QUBIC to be published in a special issue of JCAP. Accepted for publication

A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam, the measurement of interference fringes, and the measurement of polarization performance. A modulated and frequency tunable millimetre-wave source in the telescope far-field is used to simulate a point source. The QUBIC pointing is scanned across the point source to produce beam maps. Polarization modulation is measured using a rotating Half Wave Plate. The measured beam matches well to the theoretical simulations and gives QUBIC the ability to do spectro imaging. The polarization performance is excellent with less than 0.5\% cross-polarization rejection. QUBIC is ready for deployment on the high altitude site at Alto Chorillo, Argentina to begin scientific operations., Comment: Part of a series of 8 papers on QUBIC accepted by JCAP for a special issue: https://iopscience.iop.org/journal/1475-7516/page/QUBIC_status_and_forecast

Rheology is the science of deformation and flow, with a focus on materials that do not exhibit simple linear elastic or viscous Newtonian behaviours. Rheology plays an important role in the empirical characterisation of soft viscoelastic materials commonly found in the food and cosmetics industry, as well as in biology and bioengineering. A broad range of theoretical tools exist to extract material parameters and interpret them thanks to data analysis and/or physical modelling. RHEOS (RHEology, Open-Source) is a software package designed to make the analysis of rheological data simpler, faster and more reproducible. RHEOS is currently limited to the broad family of linear viscoelastic models. A particular strength of the library is its ability to handle rheological models containing fractional derivatives which have demonstrable utility for the modelling of biological materials but have hitherto remained in relative obscurity-possibly due to their mathematical and computational complexity. RHEOS is written in Julia, which greatly assists achievement of our aims as it provides excellent computational efficiency and approachable syntax. RHEOS is fully documented and has extensive testing coverage. It should be noted that RHEOS is not an optimisation package. It builds on another optimisation package, NLopt, by adding a large number of abstractions and functionality specific to the exploration of viscoelastic data., Comment: 4 pages

The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addresses these requirements using an innovative approach combining the sensitivity of Transition Edge Sensor cryogenic bolometers, with the deep control of systematics characteristic of interferometers. This makes QUBIC unique with respect to others classical imagers experiments devoted to the CMB polarization. In this contribution we report a description of the QUBIC instrument including recent achievements and the demonstration of the bolometric interferometry performed in lab. QUBIC will be deployed at the observation site in Alto Chorrillos, in Argentina at the end of 2019., Comment: Accepted for publication in the Journal of Low Temperature Physics

QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detectors. QUBIC will be deployed in Argentina, at the Alto Chorrillos mountain site near San Antonio de los Cobres, in the Salta province. The QUBIC detection chain consists in 2048 NbSi Transition Edge Sensors (TESs) cooled to 350mK.The voltage-biased TESs are read out with Time Domain Multiplexing based on Superconducting QUantum Interference Devices (SQUIDs) at 1 K and a novel SiGe Application-Specific Integrated Circuit (ASIC) at 60 K allowing to reach an unprecedented multiplexing (MUX) factor equal to 128. The QUBIC experiment is currently being characterized in the lab with a reduced number of detectors before upgrading to the full instrument. I will present the last results of this characterization phase with a focus on the detectors and readout system., Comment: Conference proceedings submitted to the Journal of Low Temperature Physics for LTD18

QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex optical and detector stages to 40 K, 4 K, 1 K and 350 mK using two pulse tube coolers, a novel 4He sorption cooler and a double-stage 3He/4He sorption cooler. We discuss the thermal and mechanical design of the cryostat, modelling and thermal analysis, and laboratory cryogenic testing.

In this paper we describe QUBIC, an experiment that takes up the challenge posed by the detection of primordial gravitational waves with a novel approach, that combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. The so-called "self-calibration" is a technique deeply rooted in the interferometric nature of the instrument and allows us to clean the measured data from instrumental effects. The first module of QUBIC is a dual band instrument (150 GHz and 220 GHz) that will be deployed in Argentina during the Fall 2018., Comment: Presented at the EPS Conference on High Energy Physics, Venice (Italy), 5-12 July 2017 Accepted for publication in conference proceedings

QUBIC is an instrument aiming at measuring the B mode polarisation anisotropies at medium scales angular scales (30-200 multipoles). The search for the primordial CMB B-mode polarization signal is challenging, because of many difficulties: smallness of the expected signal, instrumental systematics that could possibly induce polarization leakage from the large E signal into B, brighter than anticipated polarized foregrounds (dust) reducing to zero the initial hope of finding sky regions clean enough to have a direct primordial B-modes observation. The QUBIC instrument is designed to address all aspects of this challenge with a novel kind of instrument, a Bolometric Interferometer, combining the background-limited sensitivity of Transition-Edge-Sensors and the control of systematics allowed by the observation of interference fringe patterns, while operating at two frequencies to disentangle polarized foregrounds from primordial B mode polarization. Its characteristics are described in details in this Technological Design Report., Comment: 139 pages ; high resolution version can be found on the qubic website (http://qubic.in2p3.fr/QUBIC/Home.html) minor changes : update author list & affiliations ; correct title

QUBIC is a unique instrument that crosses the barriers between classical imaging architectures and interferometry taking advantage from both for high sensitivity and systematics mitigation. The scientific target is the detection of the primordial gravitational waves imprint on the Cosmic Microwave Background which are the proof of inflation, holy grail of modern cosmology. In this paper, we show the latest advances in the development of the architecture and the sub-systems of the first module of this instrument to be deployed in Dome Charlie Concordia base - Antarctica in 2015., Comment: 6 pages, 2 figures, conference LTD15

The merger of two neutron stars leaves behind a rapidly spinning hypermassive object whose survival is believed to depend on the maximum mass supported by the nuclear equation of state, angular momentum redistribution by (magneto-)rotational instabilities, and spindown by gravitational waves. The high temperatures (~5-40 MeV) prevailing in the merger remnant may provide thermal pressure support that could increase its maximum mass and, thus, its life on a neutrino-cooling timescale. We investigate the role of thermal pressure support in hypermassive merger remnants by computing sequences of spherically-symmetric and axisymmetric uniformly and differentially rotating equilibrium solutions to the general-relativistic stellar structure equations. Using a set of finite-temperature nuclear equations of state, we find that hot maximum-mass critically spinning configurations generally do not support larger baryonic masses than their cold counterparts. However, subcritically spinning configurations with mean density of less than a few times nuclear saturation density yield a significantly thermally enhanced mass. Even without decreasing the maximum mass, cooling and other forms of energy loss can drive the remnant to an unstable state. We infer secular instability by identifying approximate energy turning points in equilibrium sequences of constant baryonic mass parametrized by maximum density. Energy loss carries the remnant along the direction of decreasing gravitational mass and higher density until instability triggers collapse. Since configurations with more thermal pressure support are less compact and thus begin their evolution at a lower maximum density, they remain stable for longer periods after merger., Comment: 20 pages, 12 figures. Accepted for publication in ApJ

Context. The QUBIC collaboration is building a bolometric interferometer dedicated to the detection of B-mode polarization fluctuations in the Cosmic Microwave Background. Aims. We introduce a self-calibration procedure related to those used in radio-interferometry to control a large range of instrumental systematic errors in polarization-sensitive instruments. Methods. This procedure takes advantage of the fact that in the absence of systematic effects, measurements on redundant baselines should exactly match each other. For a given systematic error model, measuring each baseline independently therefore allows to write a system of nonlinear equations whose unknowns are the systematic error model parameters (gains and couplings of Jones matrices for instance). Results. We give the mathematical basis of the self-calibration. We implement this method numerically in the context of bolometric interferometry. We show that, for large enough arrays of horns, the nonlinear system can be solved numerically using a standard nonlinear least-squares fitting and that the accuracy achievable on systematic effects is only limited by the time spent on the calibration mode for each baseline apart from the validity of the systematic error model., Comment: 11 pages, 4 figures

We describe the processing of the 336 billion raw data samples from the High Frequency Instrument (HFI) which we performed to produce six temperature maps from the first 295 days of Planck-HFI survey data. These maps provide an accurate rendition of the sky emission at 100, 143, 217, 353, 545 and 857 GHz with an angular resolution ranging from 9.9 to 4.4^2. The white noise level is around 1.5 {\mu}K degree or less in the 3 main CMB channels (100--217GHz). The photometric accuracy is better than 2% at frequencies between 100 and 353 GHz and around 7% at the two highest frequencies. The maps created by the HFI Data Processing Centre reach our goals in terms of sensitivity, resolution, and photometric accuracy. They are already sufficiently accurate and well-characterised to allow scientific analyses which are presented in an accompanying series of early papers. At this stage, HFI data appears to be of high quality and we expect that with further refinements of the data processing we should be able to achieve, or exceed, the science goals of the Planck project., Comment: Replaced by the accepted version for publication, as part of a package of papers describing first results of the Planck mission The paper with figures at full resolution and full color tables can also be downloaded from the ESA site http://www.rssd.esa.int/Planck

The Planck High Frequency Instrument (HFI) is designed to measure the temperature and polarization anisotropies of the Cosmic Microwave Background and galactic foregrounds in six wide bands centered at 100, 143, 217, 353, 545 and 857 GHz at an angular resolution of 10' (100 GHz), 7' (143 GHz), and 5' (217 GHz and higher). HFI has been operating flawlessly since launch on 14 May 2009. The bolometers cooled to 100 mK as planned. The settings of the readout electronics, such as the bolometer bias current, that optimize HFI's noise performance on orbit are nearly the same as the ones chosen during ground testing. Observations of Mars, Jupiter, and Saturn verified both the optical system and the time response of the detection chains. The optical beams are close to predictions from physical optics modeling. The time response of the detection chains is close to pre-launch measurements. The detectors suffer from an unexpected high flux of cosmic rays related to low solar activity. Due to the redundancy of Planck's observations strategy, the removal of a few percent of data contaminated by glitches does not affect significantly the sensitivity. The cosmic rays heat up significantly the bolometer plate and the modulation on periods of days to months of the heat load creates a common drift of all bolometer signals which do not affect the scientific capabilities. Only the high energy cosmic rays showers induce inhomogeneous heating which is a probable source of low frequency noise., Comment: Submitted to A&A. 22 pages, 6 tables, 21 figures. One of a set of simultaneous papers for the Planck Mission

One of the major challenges of modern cosmology is the detection of B-mode polarization anisotropies in the CMB. These originate from tensor fluctuations of the metric produced during the inflationary phase. Their detection would therefore constitute a major step towards understanding the primordial Universe. The expected level of these anisotropies is however so small that it requires a new generation of instruments with high sensitivity and extremely good control of systematic effects. We propose the QUBIC instrument based on the novel concept of bolometric interferometry, bringing together the sensitivity advantages of bolometric detectors with the systematics effects advantages of interferometry. Methods: The instrument will directly observe the sky through an array of entry horns whose signals will be combined together using an optical combiner. The whole set-up is located inside a cryostat. Polarization modulation will be achieved using a rotating half-wave plate and interference fringes will be imaged on two focal planes (separated by a polarizing grid) tiled with bolometers. We show that QUBIC can be considered as a synthetic imager, exactly similar to a usual imager but with a synthesized beam formed by the array of entry horns. Scanning the sky provides an additional modulation of the signal and improve the sky coverage shape. The usual techniques of map-making and power spectrum estimation can then be applied. We show that the sensitivity of such an instrument is comparable with that of an imager with the same number of horns. We anticipate a low level of beam-related systematics thanks to the fact that the synthesized beam is determined by the location of the primary horns. Other systematics should be under good control thanks to an autocalibration technique, specific to our concept, that will permit the accurate determination of most of the systematics parameters., Comment: 12 pages, 10 figures, submitted to Astronomy and Astrophysics

Bolometric Interferometry is a technology currently under development that will be first dedicated to the detection of B-mode polarization fluctuations in the Cosmic Microwave Background. A bolometric interferometer will have to take advantage of the wide spectral detection band of its bolometers in order to be competitive with imaging experiments. A crucial concern is that interferometers are presumed to be importantly affected by a spoiling effect known as bandwidth smearing. In this paper, we investigate how the bandwidth modifies the work principle of a bolometric interferometer and how it affects its sensitivity to the CMB angular power spectra. We obtain analytical expressions for the broadband visibilities measured by broadband heterodyne and bolometric interferometers. We investigate how the visibilities must be reconstructed in a broadband bolometric interferometer and show that this critically depends on hardware properties of the modulation phase shifters. Using an angular power spectrum estimator accounting for the bandwidth, we finally calculate the sensitivity of a broadband bolometric interferometer. A numerical simulation has been performed and confirms the analytical results. We conclude (i) that broadband bolometric interferometers allow broadband visibilities to be reconstructed whatever the kind of phase shifters used and (ii) that for dedicated B-mode bolometric interferometers, the sensitivity loss due to bandwidth smearing is quite acceptable, even for wideband instruments (a factor 2 loss for a typical 20% bandwidth experiment)., Comment: 13 pages, 14 figures, submitted to A&A

Context. The search for B-mode polarization fluctuations in the Cosmic Microwave Background is one of the main challenges of modern cosmology. The expected level of the B-mode signal is very low and therefore requires the development of highly sensitive instruments with low systematic errors. An appealing possibility is bolometric interferometry. Aims. We compare in this article the sensitivity on the CMB angular power spectrum achieved with direct imaging, heterodyne and bolometric interferometry. Methods. Using a simple power spectrum estimator, we calculate its variance leading to the counterpart for bolometric interferometry of the well known Knox formula for direct imaging. Results. We find that bolometric interferometry is less sensitive than direct imaging. However, as expected, it is finally more sensitive than heterodyne interferometry due to the low noise of the bolometers. It therefore appears as an alternative to direct imagers with different and possibly lower systematic errors, mainly due to the absence of an optical setup in front of the horns., Comment: 5 pages, 3 figures. This last version matches the published version (Astronomy and Astrophysics 491 3 (2008) 923-927). Sensitivity of Heterodyne Interferometers modified by a factor of two

Context: Most upcoming CMB polarization experiments will use direct imaging to search for the primordial gravitational waves through the B-modes. Bolometric interferometry is an appealing alternative to direct imaging that combines the advantages of interferometry in terms of systematic effects handling and those of bolometric detectors in terms of sensitivity. Aims: We calculate the signal from a bolometric interferometer in order to investigate its sensitivity to the Stokes parameters paying particular attention to the choice of the phase-shifting scheme applied to the input channels in order to modulate the signal. Methods: The signal is expressed as a linear combination of the Stokes parameter visibilities whose coefficients are functions of the phase-shifts. Results: We show that the signal to noise ratio on the reconstructed visibilities can be maximized provided the fact that the phase-shifting scheme is chosen in a particular way called coherent summation of equivalent baselines. As a result, a bolometric interferometer is competitive with an imager having the same number of horns, but only if the coherent summation of equivalent baselines is performed. We confirm our calculations using a Monte-Carlo simulation. We also discuss the impact of the uncertainties on the relative calibration between bolometers and propose a way to avoid this systematic effect., Comment: 8 pages, 6 figures, submitted to A&A

The Sloan Digital Sky Survey-II (SDSS-II) has embarked on a multi-year project to identify and measure light curves for intermediate-redshift (0.05 < z < 0.35) Type Ia supernovae (SNe Ia) using repeated five-band (ugriz) imaging over an area of 300 sq. deg. The survey region is a stripe 2.5 degrees wide centered on the celestial equator in the Southern Galactic Cap that has been imaged numerous times in earlier years, enabling construction of a deep reference image for discovery of new objects. Supernova imaging observations are being acquired between 1 September and 30 November of 2005-7. During the first two seasons, each region was imaged on average every five nights. Spectroscopic follow-up observations to determine supernova type and redshift are carried out on a large number of telescopes. In its first two three-month seasons, the survey has discovered and measured light curves for 327 spectroscopically confirmed SNe Ia, 30 probable SNe Ia, 14 confirmed SNe Ib/c, 32 confirmed SNe II, plus a large number of photometrically identified SNe Ia, 94 of which have host-galaxy spectra taken so far. This paper provides an overview of the project and briefly describes the observations completed during the first two seasons of operation., Comment: Submitted to The Astronomical Journal (24 pages, 10 figures)

Archeops is a balloon--borne experiment widely inspired by the Planck satellite and by its High Frequency Instrument (HFI). It is mainly dedicated to measure the Cosmic Microwave Background (CMB) temperature anisotropies at high angular resolution (about 12 arcminutes) over a large fraction of the sky (around 30 %) in the millimetre and submillimetre range at 143, 217, 353 and 545 GHz. Further, the Archeops 353 GHz channel consists of three pairs of polarized sensitive bolometers designed to detect the polarized diffuse emission of Galactic dust. We present in this paper the update of the instrumental setup as well as the inflight performance for the last Archeops flight campaign in February 2002 from Kiruna (Sweden). We also describe the processing and analysis of the Archeops time ordered data for that campaign which lead to the measurement of the CMB anisotropies power spectrum in the multipole range l=10-700 (Benoit et al. 2003a, Tristram et al. 2005) and to the first measurement of the dust polarized emission at large angular scales and its polarized. We present maps of 30 % of the sky of the Galactic emission, including the Galactic plane, in the four Archeops channels at 143, 217, 353 and 545 GHz and maps of the CMB anisotropies at 143 and 217 GHz. These are the firstever available sub--degree resolution maps in the millimetre and submillimetre range of the large angular-scales Galactic dust diffuse emission and CMB temperature anisotropies respectively., Comment: A full resolution version of the paper including figures is available at http://www.archeops.org/Archeops_Publication/Pub/Processing.pdf 39 pages, 40 figures

We revisit the formation of PSR J0737-3039, taking into account the most recent observational constraints. We show that the most likely kick velocity and progenitor parameters depend strongly on the consideration of the full five-dimensional PDF for the magnitude and direction of the kick velocity imparted to pulsar B at birth, the mass of pulsar B's pre-supernova helium star progenitor, and the pre-supernova orbital separation, and on the adopted prior assumptions. The priors consist of the transverse systemic velocity, the age of the system, and the treatment of the unknown radial velocity. Since the latter cannot be determined from observation, we adopt a statistical approach and use theoretical radial-velocity distributions obtained from population synthesis calculations for coalescing double neutron stars. We find that the prior assumptions about the pre-supernova helium star mass affect the derived most likely parameters significantly: when the minimum helium star mass required for neutron star formation is assumed to be 2.1Msun, the most likely kick velocity ranges from 70-180km/s; when masses lower than 2.1Msun are assumed to allow neutron star formation, the most likely kick velocity can be as low as a few km/s, although the majority of the considered models still yield most likely kick velocities of 50-170km/s. We also show that the proximity of the double pulsar to the Galactic plane and the small proper motion do not pose stringent constraints on the kick velocity and progenitor mass of pulsar B. Instead, the constraints imposed by the orbital dynamics of asymmetric supernova explosions turn out to be much more restrictive. We conclude that the currently available observational constraints cannot be used to favor a specific core-collapse and neutron star formation mechanism. (abridged), Comment: Accepted by Physical Review D. Revised version incorporates a detailed rebuttal of the remarks made by Piran & Shaviv in astro-ph/0603649 (see Appendix A) and also minor clarifications requested by an anonymous referee

We report the results of our statistical study of the POINT-AGAPE CNe catalogue. The first Sloan $r'$ and $i'$ analysis of the MMRD relationship in M31 is performed using the resulting POINT-AGAPE CN catalogue. Good fits are produced to the MMRD in the two filters. However, we are unable to verify the $t_{15}$ relationship for either Sloan filter. The subsequent analysis of our automated CN detection pipeline has provided us with the most thorough knowledge of the completeness of a CN survey to-date. In addition, the large field of view of the survey has permitted us to probe the outburst rate well into the galactic disk, unlike previous CCD imaging surveys. Using this analysis we are able to probe the CN distribution of M31 and evaluate the global nova rate. Using models of the galactic surface brightness of M31, we show that the observed CN distribution consists of a separate bulge and disk population. We also show that the M31 bulge CN eruption rate per unit $r'$ flux is more than five times greater than that of the disk. We deduce a global M31 CN rate of $65^{+16}_{-15}$ year$^{-1}$, a value much higher than found by previous surveys. Using the global rate, we derive a M31 bulge rate of $38^{+15}_{-12}$ year$^{-1}$ and a disk rate of $27^{+19}_{-15}$ year$^{-1}$. Given our understanding of the completeness and an analysis of other sources of error, we conclude that the true global nova rate of M31 is at least 50% higher than was previously thought and this has consequent implications for the presumed CN rate in the Milky Way. We deduce a Galactic bulge rate of $14^{+6}_{-5}$ year$^{-1}$, a disk rate of $20^{+14}_{-11}$ year$^{-1}$ and a global Galactic rate of $34^{+15}_{-12}$ year$^{-1}$., Comment: 15 pages, 12 figures, submitted for publication in MNRAS

The POINT-AGAPE collaboration is carrying out a search for gravitational microlensing toward M31 to reveal galactic dark matter in the form of MACHOs (Massive Astrophysical Compact Halo Objects) in the halos of the Milky Way and M31. A high-threshold analysis of 3 years of data yields 6 bright, short--duration microlensing events, which are confronted to a simulation of the observations and the analysis. The observed signal is much larger than expected from self lensing alone and we conclude, at the 95% confidence level, that at least 20% of the halo mass in the direction of M31 must be in the form of MACHOs if their average mass lies in the range 0.5-1 M$_\odot$. This lower bound drops to 8% for MACHOs with masses $\sim 0.01$ M$_\odot$. In addition, we discuss a likely binary microlensing candidate with caustic crossing. Its location, some 32' away from the centre of M31, supports our conclusion that we are detecting a MACHO signal in the direction of M31.

As a first step towards understanding the angular momentum evolution history of black holes in merging black-hole/neutron-star binaries, we perform population synthesis calculations to track the distribution of accretion histories of compact objects in such binaries. We find that there are three distinct processes which can possibly contribute to the black-hole spin magnitude: a birth spin for the black hole, imparted at either (i) the collapse of a massive progenitor star to a black hole or (ii) the accretion-induced collapse of a neutron star to a black hole; and (iii) an accretion spin-up when the already formed black hole [via (i) or (ii)] goes through an accretion episode (through an accretion disk or a common-envelope phase). Our results show that, with regard to accretion-induced spinup in merging BH-NS binaries [method (iii) above], only {\em accretion episodes associated with common-envelope phases and hypercritical accretion rates} occur in the formation history of merging black hole/neutron star binaries. Lacking unambiguous experimental information about BH birth spins [i.e., regarding the results of processes (i) and (ii)], we choose two fiducial values for the BH birth angular momentum parameter a=J/M^2, consistent with observations of (i) NS birth spins (a roughly 0) and (ii) X-ray binaries (a=0.5). Using these two fiducial values and a conservative upper bound on the specific angular momentum of accreted matter, we discuss the expected range of black hole spins in the binaries of interest. We conclude with comments on the significance of these results for ground-based gravitational-wave searches of inspiral signals from black hole binaries., Comment: Submitted to ApJ. (v1) Uses emulateapj.cls. 5 figures. (v2): corrected reference list and uses smaller figures (v3): Includes changes in response to referee comments, including new discussion of XRBs. Figures merged, so only 3 figures (v4) Minor typo correction, plus updated abstract posted online

We present the first measurement of temperature and polarization angular power spectra of the diffuse emission of Galactic dust at 353 GHz as seen by Archeops on 20% of the sky. The temperature angular power spectrum is compatible with that provided by the extrapolation to 353 GHz of IRAS and DIRBE maps using \cite{fds} model number 8. For Galactic latitudes $|b| \geq 5$ deg we report a 4 sigma detection of large scale ($3\leq \ell \leq 8$) temperature-polarization cross-correlation $(\ell+1)C_\ell^{TE}/2\pi = 76\pm 21 \mu\rm{K_{RJ}}^2$ and set upper limits to the $E$ and $B$ modes at $11 \mu\rm{K_{RJ}}^2$. For Galactic latitudes $|b| \geq 10$ deg, on the same angular scales, we report a 2 sigma detection of temperature-polarization cross-correlation $(\ell+1)C_\ell^{TE}/2\pi = 24\pm 13 \mu\rm{K_{RJ}}^2$. These results are then extrapolated to 100 GHz to estimate the contamination in CMB measurements by polarized diffuse Galactic dust emission. The $TE$ signal is then $1.7\pm0.5$ and $0.5\pm0.3 \mu\rm{K^2_{CMB}}$ for $|b| \geq 5$ and 10 deg. respectively. The upper limit on $E$ and $B$ becomes $0.2 \mu\rm{K^2_{CMB}} (2\sigma)$. If polarized dust emission at higher Galactic latitude cuts is similar to the one we report here, then dust polarized radiation will be a major foreground for determining the polarization power spectra of the CMB at high frequencies above 100 GHz., Comment: 11 pages, 8 figures, submitted to AA

We present improved results on the measurement of the angular power spectrum of the Cosmic Microwave Background (CMB) temperature anisotropies using the data from the last Archeops flight. This refined analysis is obtained by using the 6 most sensitive photometric pixels in the CMB bands centered at 143 and 217 GHz and 20% of the sky, mostly clear of foregrounds. Using two different cross-correlation methods, we obtain very similar results for the angular power spectrum. Consistency checks are performed to test the robustness of these results paying particular attention to the foreground contamination level which remains well below the statistical uncertainties. The multipole range from l=10 to l=700 is covered with 25 bins, confirming strong evidence for a plateau at large angular scales (the Sachs-Wolfe plateau) followed by two acoustic peaks centered around l=220 and l=550 respectively. These data provide an independent confirmation, obtained at different frequencies, of the WMAP first year results., Comment: 14 pages, 16 figures, A&A

An automated search is carried out for microlensing events using a catalogue of 44554 variable superpixel lightcurves derived from our three-year monitoring program of M31. Each step of our candidate selection is objective and reproducible by a computer. Our search is unrestricted, in the sense that it has no explicit timescale cut. So, it must overcome the awkward problem of distinguishing long-timescale microlensing events from long-period stellar variables. The basis of the selection algorithm is the fitting of the superpixel lightcurves to two different theoretical models, using variable star and blended microlensing templates. Only if microlensing is preferred is an event retained as a possible candidate. Further cuts are made with regard to (i) sampling, (ii) goodness of fit of the peak to a Paczynski curve, (iii) consistency of the microlensing hypothesis with the absence of a resolved source, (iv) achromaticity, (v) position in the colour-magnitude diagram and (vi) signal-to-noise ratio. Our results are reported in terms of first-level candidates, which are the most trustworthy, and second-level candidates, which are possible microlensing but have lower signal-to-noise and are more questionable. The pipeline leaves just 3 first-level candidates, all of which have very short full-width half-maximum timescale (<5 days) and 3 second-level candidates, which have timescales of 31, 36 and 51 days respectively. We also show 16 third-level lightcurves, as an illustration of the events that just fail the threshold for designation as microlensing candidates. They are almost certainly mainly variable stars. Two of the 3 first-level candidates correspond to known events (PA 00-S3 and PA 00-S4) already reported by the POINT-AGAPE project. The remaining first-level candidate is new., Comment: 22 pages, 18 figures, MNRAS, to appear

We present the AGAPE astrometric and photometric catalogue of 1579 variable stars in a 14'x10' field centred on M31. This work is the first survey devoted to variable stars in the bulge of M31. The R magnitudes of the objects and the B-R colours suggest that our sample is dominated by red long-period variable stars (LPV), with a possible overlap with Cepheid-like type II stars. Twelve nova candidates are identified. Correlations with other catalogues suggest that 2 novae could be recurrent novae and provide possible optical counterparts for 2 supersoft X-ray sources candidates observed with Chandra., Comment: 11 pages, Latex, accepted for publication in A&A

The POINT-AGAPE survey is an optical search for gravitational microlensing events towards the Andromeda Galaxy (M31). As well as microlensing, the survey is sensitive to many different classes of variable stars and transients. Here we describe the automated detection and selection pipeline used to identify M31 classical novae (CNe) and we present the resulting catalogue of 20 CN candidates observed over three seasons. CNe are observed both in the bulge region as well as over a wide area of the M31 disk. Nine of the CNe are caught during the final rise phase and all are well sampled in at least two colours. The excellent light-curve coverage has allowed us to detect and classify CNe over a wide range of speed class, from very fast to very slow. Among the light-curves is a moderately fast CN exhibiting entry into a deep transition minimum, followed by its final decline. We have also observed in detail a very slow CN which faded by only 0.01 mag day$^{-1}$ over a 150 day period. We detect other interesting variable objects, including one of the longest period and most luminous Mira variables. The CN catalogue constitutes a uniquely well-sampled and objectively-selected data set with which to study the statistical properties of classical novae in M31, such as the global nova rate, the reliability of novae as standard-candle distance indicators and the dependence of the nova population on stellar environment. The findings of this statistical study will be reported in a follow-up paper., Comment: 21 pages, 13 figures, re-submitted for publication in MNRAS, typos corrected, references updated, figures 5-9 made clearer

Possible instrumental set--ups for the measurement of CMB polarization are reviewed in this article. We discuss existing and planned instruments, putting special emphasis on observational, instrumental, and data processing issues for the detection of very low polarization signals of prime cosmological interest. A short prospective summary is included.

The POINT-AGAPE collaboration has been monitoring M31 for three seasons with the Wide Field Camera on the Isaac Newton Telescope. In each season, data are taken for one hour per night for roughly sixty nights during the six months that M31 is visible. The two fields of view straddle the central bulge, northwards and southwards. We have calculated the locations, periods and amplitudes of 35414 variable stars in M31 as a by-product of our microlensing search. The variables are classified according to their period and amplitude of variation. They are classified into population I and II Cepheids, Miras and semi-regular long-period variables. The population I Cepheids are associated with the spiral arms, while the central concentration of the Miras and long-period variables varies noticeably, the stars with brighter (and shorter) variations being much more centrally concentrated. A crucial role in the microlensing experiment is played by the asymmetry signal. It was initially assumed that the variable stars would not be a serious problem as their distributions would be symmetric. We demonstrate that this assumption is not correct. We find that differential extinction associated with the dust lanes causes the variable star distributions to be asymmetric. The size and direction of the asymmetry of the variable stars is measured as a function of period and amplitude of variation. The implications of this discovery for the successful completion of the microlensing experiments towards M31 are discussed. (Abridged), Comment: To appear in MNRAS. Revised version including additional discussion on color of variables. Additional data table will be available once the paper is published

The origin of CMB polarization is reviewed. Special emphasis is placed on the cosmological information encoded in it: the nature of primordial fluctuations, the connection with the inflation paradigm. Insights into more recent epochs are also discussed: early reionization and high redshift matter distribution from CMB lensing., Comment: 9 pages, 6 figures, One reference added in section 6.2

We report $R_cI_c$ light curves of 2 novae in the M31 galaxy which were detected in the four year Nainital Microlensing Survey. One of these novae has been tracked from the initial increase in flux while other has been observed during its descending phase of brightness. The photometry of the first nova during the outburst phase suggests its peak $R_c$ magnitude to be about 17.2 mag with a flux decline rate of 0.11 mag day$^{-1}$ which indicates that it was a fast nova. A month after its outburst, it shows reddening followed by a plateau in $I_c$ flux. The second nova exhibits a bump in $R_c$ and $I_c$, possibly about three weeks after the outburst., Comment: 6 pages, 7 figs, Accepted to A&A, replaced with revised version Fri, 16 Oct 2003

The lightcurve of PA-99-N2, one of the recently announced microlensing candidates towards M31, shows small deviations from the standard Paczynski form. We explore a number of possible explanations, including correlations with the seeing, the parallax effect and a binary lens. We find that the observations are consistent with an unresolved RGB or AGB star in M31 being microlensed by a binary lens. We find that the best fit binary lens mass ratio is about one hundredth, which is one of most extreme values found for a binary lens so far. If both the source and lens lie in the M31 disk, then the standard M31 model predicts the probable mass range of the system to be 0.02-3.6 solar masses (95 % confidence limit). In this scenario, the mass of the secondary component is therefore likely to be below the hydrogen-burning limit. On the other hand, if a compact halo object in M31 is lensing a disk or spheroid source, then the total lens mass is likely to lie between 0.09-32 solar masses, which is consistent with the primary being a stellar remnant and the secondary a low mass star or brown dwarf. The optical depth (or alternatively the differential rate) along the line of sight toward the event indicates that a halo lens is more likely than a stellar lens provided that dark compact objects comprise no less than 15 per cent (or 5 per cent) of haloes., Comment: Latex, 23 pages, 9 figures, in press at The Astrophysical Journal

The POINT-AGAPE collaboration is currently searching for massive compact halo objects (MACHOs) towards the Andromeda galaxy (M31). The survey aims to exploit the high inclination of the M31 disk, which causes an asymmetry in the spatial distribution of M31 MACHOs. Here, we investigate the effects of halo velocity anisotropy and flattening on the asymmetry signal using simple halo models. For a spherically symmetric and isotropic halo, we find that the underlying pixel-lensing rate in far-disk M31 MACHOs is more than 5 times the rate of near-disk events. We find that the asymmetry is increased further by about 30% if the MACHOs occupy radial orbits rather than tangential orbits, but is substantially reduced if the MACHOs lie in a flattened halo. However, even for haloes with a minor-to-major axis ratio q = 0.3, the numbers of M31 MACHOs in the far-side outnumber those in the near-side by a factor of ~2. We show that, if positional information is exploited in addition to number counts, then the number of candidate events required to confirm asymmetry for a range of flattened and anisotropic halo models is achievable, even with significant contamination by variable stars and foreground microlensing events. For pixel-lensing surveys which probe a representative portion of the M31 disk, a sample of around 50 candidates is likely to be sufficient to detect asymmetry within spherical haloes, even if half the sample is contaminated, or to detect asymmetry in haloes as flat as q = 0.3 provided less than a third of the sample comprises contaminants. We also argue that, provided its mass-to-light ratio is less than 100, the recently observed stellar stream around M31 is not problematic for the detection of asymmetry. (Abstract slightly abridged.), Comment: latex, including 6 figures. Accepted for publication in ApJ

We present the first determination of the Galactic polarized emission at 353 GHz by Archeops. The data were taken during the Arctic night of February 7, 2002 after the balloon--borne instrument was launched by CNES from the Swedish Esrange base near Kiruna. In addition to the 143 GHz and 217 GHz frequency bands dedicated to CMB studies, Archeops had one 545 GHz and six 353 GHz bolometers mounted in three polarization sensitive pairs that were used for Galactic foreground studies. We present maps of the I, Q, U Stokes parameters over 17% of the sky and with a 13 arcmin resolution at 353 GHz (850 microns). They show a significant Galactic large scale polarized emission coherent on the longitude ranges [100, 120] and [180, 200] deg. with a degree of polarization at the level of 4-5%, in agreement with expectations from starlight polarization measurements. Some regions in the Galactic plane (Gem OB1, Cassiopeia) show an even stronger degree of polarization in the range 10-20%. Those findings provide strong evidence for a powerful grain alignment mechanism throughout the interstellar medium and a coherent magnetic field coplanar to the Galactic plane. This magnetic field pervades even some dense clouds. Extrapolated to high Galactic latitude, these results indicate that interstellar dust polarized emission is the major foreground for PLANCK-HFI CMB polarization measurement., Comment: Submitted to Astron. & Astrophys., 14 pages, 12 Fig., 2 Tables

We report the final analysis of a search for microlensing events in the direction of the Andromeda galaxy, which aimed to probe the MACHO composition of the M31 halo using data collected during the 1998-99 observational campaign at the MDM observatory. In a previous paper, we discussed the results from a first set of observations. Here, we deal with the complete data set, and we take advantage of some INT observations in the 1999-2000 seasons. This merging of data sets taken by different instruments turns out to be very useful, the study of the longer baseline available allowing us to test the uniqueness characteristic of microlensing events. As a result, all the candidate microlensing events previously reported turn out to be variable stars. We further discuss a selection based on different criteria, aimed at the detection of short--duration events. We find three candidates whose positions are consistent with self--lensing events, although the available data do not allow us to conclude unambiguously that they are due to microlensing., Comment: Accepted for publication in Astronomy and Astrophysics

We analyze the cosmological constraints that Archeops places on adiabatic cold dark matter models with passive power-law initial fluctuations. Because its angular power spectrum has small bins in l and large l coverage down to COBE scales, Archeops provides a precise determination of the first acoustic peak in terms of position at multipole l_peak=220 +- 6, height and width. An analysis of Archeops data in combination with other CMB datasets constrains the baryon content of the Universe, Omega(b)h^2 = 0.022 (+0.003,-0.004), compatible with Big-Bang nucleosynthesis and with a similar accuracy. Using cosmological priors obtainedfrom recent non-CMB data leads to yet tighter constraints on the total density, e.g. Omega(tot)=1.00 (+0.03,-0.02) using the HST determination of the Hubble constant. An excellent absolute calibration consistency is found between Archeops and other CMB experiments, as well as with the previously quoted best fit model.The spectral index n is measured to be 1.04 (+0.10,-0.12) when the optical depth to reionization, tau, is allowed to vary as a free parameter, and 0.96 (+0.03,-0.04) when tau is fixed to zero, both in good agreement with inflation., Comment: A&A Letter, in press, 6 pages, 7 figures, see also http://www.archeops.org

We present a determination by the Archeops experiment of the angular power spectrum of the cosmic microwave background anisotropy in 16 bins over the multipole range l=15-350. Archeops was conceived as a precursor of the Planck HFI instrument by using the same optical design and the same technology for the detectors and their cooling. Archeops is a balloon-borne instrument consisting of a 1.5 m aperture diameter telescope and an array of 21 photometers maintained at ~100 mK that are operating in 4 frequency bands centered at 143, 217, 353 and 545 GHz. The data were taken during the Arctic night of February 7, 2002 after the instrument was launched by CNES from Esrange base (Sweden). The entire data cover ~ 30% of the sky.This first analysis was obtained with a small subset of the dataset using the most sensitive photometer in each CMB band (143 and 217 GHz) and 12.6% of the sky at galactic latitudes above 30 degrees where the foreground contamination is measured to be negligible. The large sky coverage and medium resolution (better than 15 arcminutes) provide for the first time a high signal-to-noise ratio determination of the power spectrum over angular scales that include both the first acoustic peak and scales probed by COBE/DMR. With a binning of Delta(l)=7 to 25 the error bars are dominated by sample variance for l below 200. A companion paper details the cosmological implications., Comment: A&A Letter, in press, 6 pages, 4 figures, see also http://www.archeops.org

We have carried out a survey of the Andromeda galaxy for unresolved microlensing (pixel lensing). We present a subset of four short timescale, high signal-to-noise microlensing candidates found by imposing severe selection criteria: the source flux variation exceeds the flux of an R=21 magnitude star and the full width at half maximum timescale is less than 25 days. Remarkably, in three out of four cases, we have been able to measure or strongly constrain the Einstein crossing time of the event. One event, which lies projected on the M31 bulge, is almost certainly due to a stellar lens in the bulge of M31. The other three candidates can be explained either by stars in M31 and M32 or by MACHOs.