Search

The 6G Massive Multiple-Input Multiple-Output (MMIMO) networks can follow the so-called User-Centric Cell-Free (UCCF) architecture, where a single user is served by multiple Access Points (APs) coordinated by the Central Processing Unit (CPU). In this paper, we propose how O-RAN functionalities, i.e., rApp-xApp pair, can be used for energy-efficient Serving Cluster Formulation (SCF). Simulation studies show up to 37\% gain in Energy Efficiency (EE) of the proposed solution over the state-of-the-art Network-Centric (NC) designs., Comment: Accepted for presentation during The 2nd Workshop on Next-generation Open and Programmable Radio Access Networks (NG-OPERA), organized in conjunction with IEEE International Conference on Computer Communications, May 20, 2024

Open Radio Access Networks (RAN) offer diverse economic opportunities. A transition to a flexible, modular approach within the disaggregated RAN framework is crucial, involving careful planning of RAN architecture and the deployment of specialized software applications. Collaboration across sectors is essential for efficiency and reliability, with the open-source community driving innovation. This paper explores challenges for third-party application developers in Open RAN. It provides a comparative analysis of solutions, focusing on xApp development and implementation. Challenges arise in two areas: the complexities of xApp development, particularly for advanced use cases like beam management, and issues in low-level software implementation within open platforms. In conclusion, key challenges must promote academia-industry collaboration in Open RAN. This paper shares early lessons from xApp development, guiding the field's evolution., Comment: Accepted for publication in IEEE Journal on Selected Areas in Communications

From generation to generation there are increasing requirements for wireless standards both in terms of spectral and energy efficiency. While up to now the layered wireless transceiver architecture worked allowing for, e.g., separation of channel decoding algorithms from front-end design, this may need reconsideration in the 6G era. Especially the hardware-originated distortions have to be taken into account while designing other layer algorithms as the high throughput and energy efficiency requirements will push these devices to their limit revealing their nonlinear characteristics. This position paper will shed some light on new degrees of freedom while cross-layer designing and controlling multicarrier and multiantenna transceivers of 6G systems.

The Massive Multiple-Input Multiple-Output (M-MIMO) is considered as one of the key technologies in 5G, and future 6G networks. From the perspective of, e.g., channel estimation, especially for high-speed users it is easier to implement an M-MIMO network exploiting a static set of beams, i.e., Grid of Beams (GoB). While considering GoB it is important to properly assign users to the beams, i.e., to perform Beam Management (BM). BM can be enhanced by taking into account historical knowledge about the radio environment, e.g., to avoid radio link failures. The aim of this paper is to propose such a BM algorithm, that utilizes location-dependent data stored in a Radio Environment Map (REM). It utilizes received power maps, and user mobility patterns to optimize the BM process in terms of Reinforcement Learning (RL) by using the Policy Iteration method under different goal functions, e.g., maximization of received power or minimization of beam reselections while avoiding radio link failures. The proposed solution is compliant with the Open Radio Access Network (O-RAN) architecture, enabling its practical implementation. Simulation studies have shown that the proposed BM algorithm can significantly reduce the number of beam reselections or radio link failures compared to the baseline algorithm.

The Industrial Internet of Things devices due to their low cost and complexity are exposed to being hacked and utilized to attack the network infrastructure causing a so-called Signaling Storm. In this paper, we propose to utilize the Open Radio Access Network (O-RAN) architecture, to monitor the control plane messages in order to detect the activity of adversaries at its early stage.

A platoon-based driving is a technology allowing vehicles to follow each other at close distances to, e.g., save fuel. However, it requires reliable wireless communications to adjust their speeds. Recent studies have shown that the frequency band dedicated for vehicle-to-vehicle communications can be too busy for intra-platoon communications. Thus it is reasonable to use additional spectrum resources, of low occupancy, i.e., secondary spectrum channels. The challenge is to model the interference in those channels to enable proper channel selection. In this paper, we propose a two-layered Radio Environment Map (REM) that aims at providing platoons with accurate location-dependent interference models by using the Federated Learning approach. Each platoon is equipped with a Local REM that is updated on the basis of raw interference samples and previous interference model stored in the Global REM. The model in global REM is obtained by merging models reported by platoons. The nodes exchange only parameters of interference models, reducing the required control channel capacity. Moreover, in the proposed architecture platoon can utilize Local REM to predict channel occupancy, even when the connection to the Global REM is temporarily unavailable. The proposed system is validated via computer simulations considering non-trivial interference patterns.

Dynamic Point Blanking (DPB) is one of the Coordinated MultiPoint (CoMP) techniques, where some Base Stations (BSs) can be temporarily muted, e.g., to improve the cell-edge users throughput. In this paper, it is proposed to obtain the muting pattern that improves cell-edge users throughput with the use of a Deep Q-Learning. The Deep Q-Learning agent is trained on location-dependent data. Simulation studies have shown that the proposed solution improves cell-edge user throughput by about 20.6%.

Platoon-based driving is an idea that vehicles follow each other at a close distance, in order to increase road throughput and fuel savings. This requires reliable wireless communications to adjust the speeds of vehicles. Although there is a dedicated frequency band for vehicle-to-vehicle (V2V) communications, studies have shown that it is too congested to provide reliable transmission for the platoons. Additional spectrum resources, i.e., secondary spectrum channels, can be utilized when these are not occupied by other users. Characteristics of interference in these channels are usually location-dependent and can be stored in the so-called Radio Environment Maps (REMs). This paper aims to design REM, in order to support the selection of secondary spectrum channel for intra-platoon communications. We propose to assess the channel's quality in terms of outage probability computed, with the use of estimated interference distributions stored in REM. A frequency selection algorithm that minimizes the number of channel switches along the planned platoon route is proposed. Additionally, the REM creation procedure is shown that reduces the number of database entries using (Density-Based Spatial Clustering of Applications with Noise) DBSCAN algorithm. The proposals are tested using real IQ samples captured on a real road. Application of the DBSCAN clustering to the constructed REM provided 7% reduction in its size. Utilization of the proposed channel selection algorithm resulted in a 35 times reduction of channel switches concerning channel assignment performed independently in every location.

The Massive Multiple-Input Multiple-Output (MMIMO) technique together with Heterogeneous Network (Het-Net) deployment enables high throughput of 5G and beyond networks. However, a high number of antennas and a high number of Base Stations (BSs) can result in significant power consumption. Previous studies have shown that the energy efficiency (EE) of such a network can be effectively increased by turning off some BSs depending on User Equipments (UEs) positions. Such mapping is obtained by using Reinforcement Learning. Its results are stored in a so-called Radio Environment Map (REM). However, in a real network, the number of UEs' positions patterns would go to infinity. This paper aims to determine how to match the current set of UEs' positions to the most similar pattern, i.e., providing the same optimal active BSs set, saved in REM. We compare several state-of-the-art distance metrics using a computer simulator: an accurate 3D-Ray-Tracing model of the radio channel and an advanced system-level simulator of MMIMO Het-Net. The results have shown that the so-called Sum of Minimums Distance provides the best matching between REM data and UEs' positions, enabling up to 56% EE improvement over the scenario without EE optimization.

Energy Efficiency (EE) is of high importance while considering Massive Multiple-Input Multiple-Output (M-MIMO) networks where base stations (BSs) are equipped with an antenna array composed of up to hundreds of elements. M-MIMO transmission, although highly spectrally efficient, results in high energy consumption growing with the number of antennas. This paper investigates EE improvement through switching on/off underutilized BSs. It is proposed to use the location-aware approach, where data about an optimal active BSs set is stored in a Radio Environment Map (REM). For efficient acquisition, processing and utilization of the REM data, reinforcement learning (RL) algorithms are used. State-of-the-art exploration/exploitation methods including e-greedy, Upper Confidence Bound (UCB), and Gradient Bandit are evaluated. Then analytical action filtering, and an REM-based Exploration Algorithm (REM-EA) are proposed to improve the RL convergence time. Algorithms are evaluated using an advanced, system-level simulator of an M-MIMO Heterogeneous Network (HetNet) utilizing an accurate 3D-ray-tracing radio channel model. The proposed RL-based BSs switching algorithm is proven to provide 70% gains in EE over a state-of-the-art algorithm using an analytical heuristic. Moreover, the proposed action filtering and REM-EA can reduce RL convergence time in relation to the best-performing state-of-the-art exploration method by 60% and 83%, respectively.