Search

Terahertz lies at the juncture between RF and optical electromagnetism, serving as a transition from mm-Wave to infrared photonics. Terahertz technology has been used for industrial quality control, security imaging, and high-speed communications, and often generated through optoelectronic solutions by using photoconductive antennas. In this paper, Multiphysics simulations on semi insulating GaAs, grapheneenhanced photoconductive antennas are conducted to effectively decouple optical responses of semiconductor carrier generation/drift from Terahertz radiation computation, which provides a comprehensive and integrated platform for future terahertz photoconductive antenna designs, Comment: 3 pages, 4 figures, accepted by 2024 IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization (NEMO'2024)

The terahertz (THz) frequency range, bridging the gap between microwave and infrared frequencies, presents unparalleled opportunities for advanced imaging, sensing, communications, and spectroscopy applications. Terahertz photonics, in analogy with microwave photonics, is a promising solution to address the critical challenges in THz technologies through optical methods. Despite its vast potential, key technical challenges remain in effectively interfacing THz signals with the optical domain, especially THz-optic modulation and optical generation of THz waves. Here, we address these challenges using a monolithic integrated photonic chip designed to support efficient bidirectional interaction between THz and optical waves. Leveraging the significant second-order optical nonlinearity and strong optical and THz confinement in a thin-film lithium niobate on quartz platform, the chip supports both efficient THz-optic modulation and continuous THz wave generation at up to 500 GHz. The THz-optic modulator features a radio frequency (RF) half-wave voltage of 8V at 500 GHz, representing more than an order of magnitude reduction in modulation power consumption from previous works. The measured continuous wave THz generation efficiency of 4.8*10-6 /W at 500 GHz also marks a tenfold improvement over existing tunable THz generation devices based on lithium niobate. We further leverage the coherent nature of the optical THz generation process and mature optical modulation techniques to realize high-speed electro-THz modulation at frequencies up to 35 GHz. The chip-scale THz-photonic platform paves the way for more compact, efficient, and cost-effective THz systems with potential applications in THz communications, remote sensing, and spectroscopy.

Focus scanning is critically important in many terahertz (THz) imaging and sensing applications. A traditional single focusing transmitarray can achieve a good focus when the source is on-axis but moving the source off-axis produces a significant aberration. This paper presents a novel approach to reducing coma in off-axis scanning in the THz region. Here, a dual transmitarray solution is proposed, in which a transmitarray with an optimized phase profile is placed behind a regular phase profile transmitarray. A linearly polarized, dual-transmitarray antenna was fabricated for validation, and the focusing performances were experimentally characterized. The measured results are in good agreement with the theoretical ones. The generated spot of the dual-transmitarray antenna remains focused on an angle up to 50deg, with a -3 dB spot size of less than 4 mm at 290 GHz. The measured near-field sidelobes are all below -10 dB within the whole scanning range., Comment: 9 pages, 14 figures

Millimeter-wave (mmWave) band (30 - 300 GHz) is an emerging spectrum range for wireless communication, short-range radar and sensor applications. mmWave-optic modulators that could efficiently convert mmWave signals into optical domain are crucial components for long-haul transmission of mmWave signals through optical networks. At these ultrahigh frequencies, however, the modulation performances are highly sensitive to the transmission line loss as well as the velocity- and impedance-matching conditions, while precise measurements and modeling of these parameters are often non-trivial. Here we present a systematic investigation of the mmWave-optic modulation performances of thin-film lithium niobate modulators through theoretical modeling, electrical verifications and electro-optic measurements at frequencies up to 325 GHz. Based on our experimentally verified model, we demonstrate thin-film lithium niobate mmWave-optic modulators with a measured 3-dB electro-optic bandwidth of 170 GHz and a 6-dB bandwidth of 295 GHz. The device also shows a low RF half-wave voltage of 7.3 V measured at an ultrahigh modulation frequency of 250 GHz. This work provides a comprehensive guideline for the design and characterization of mmWave-optic modulators and paves the way toward future integrated mmWave photonic systems for beyond-5G communication and radar applications.

Amplitude-modulated (AM) leaky-wave antenna (LWA), a concept following amplitude modulation technique from classical communications theory, is a promising structure that enables transforming traveling wave into the radiating wave. In this paper, we provide a different perspective based on the classical holographic theory to gain insight into the physical mechanism of AM LWA and design novel LWAs. In analogy to the classical optical Gabor hologram, we demonstrate that only the amplitude variation of the traveling wave is needed to record both the amplitude and phase information of the object wave. The consistency between the holography theory and previous spatial spectrum approach for explaining AM LWA operating mechanism is also demonstrated. For validation purpose, two novel millimeter-wave (mmW) holographic AM LWAs based on the substrate integrated inset dielectric waveguide (IDW) are designed. The first one is for far-field high-gain applications while the second is for near-field focusing (NFF) applications. Both simulated and measured results demonstrate the effectiveness of the AM holography theory for AM LWAs analysis and design., Comment: 9 pages, 17 figures

Metamaterials are effectively homogeneous materials that display extraordinary dispersion. Negative index metamaterials, zero index metamaterials and extremely anisotropic metamaterials are just a few examples. Instead of using locally resonating elements that may cause undesirable absorption, there are huge efforts to seek alternative routes to obtain these unusual properties. Here, we experimentally demonstrate an alternative approach for constructing metamaterials with extreme dispersion by simply coiling up space with curled channels. Such a geometric approach has the advantage that the ratio between the wavelength and the lattice constant in achieving a negative or zero index is easily tunable. It allows us to construct for the first time an acoustic metamaterial with conical dispersion, leading to a clear demonstration of negative refraction from an acoustic metamaterial with airborne sound. We also design and realize a double-negative metamaterial for microwaves under the same principle., Comment: 10 pages, 4 figures

Complete polarimetric signatures of a canopy of dielectric cylinders overlying a homogeneous half space are studied with the first and second order solutions of the vector radiative transfer theory. The vector radiative transfer equations contain a general nondiagonal extinction matrix and a phase matrix. The energy conservation issue is addressed by calculating the elements of the extinction matrix and the elements of the phase matrix in a manner that is consistent with energy conservation. Two methods are used. In the first method, the surface fields and the internal fields of the dielectric cylinder are calculated by using the fields of an infinite cylinder. The phase matrix is calculated and the extinction matrix is calculated by summing the absorption and scattering to ensure energy conservation. In the second method, the method of moments is used to calculate the elements of the extinction and phase matrices. The Mueller matrix based on the first order and second order multiple scattering solutions of the vector radiative transfer equation are calculated. Results from the two methods are compared. The vector radiative transfer equations, combined with the solution based on method of moments, obey both energy conservation and reciprocity. The polarimetric signatures, copolarized and depolarized return, degree of polarization, and phase differences are studied as a function of the orientation, sizes, and dielectric properties of the cylinders. It is shown that second order scattering is generally important for vegetation canopy at C band and can be important at L band for some cases.