Search

Next-generation data networks need to support Tb/s rates. In-phase and quadrature (IQ) modulation combine phase and intensity information to increase the density of encoded data, reduce overall power consumption by minimising the number of channels, and increase noise tolerance. To reduce errors when decoding the received signal, intersymbol interference must be minimised. This is achieved with pure phase modulation, where the phase of the optical signal is controlled without changing its intensity. Phase modulators are characterised by the voltage required to achieve a $\pi$ phase shift V$_{\pi}$, the device length L, and their product V$_{\pi}$L. To reduce power consumption, IQ modulators are needed with$<$1V drive voltages and compact (sub-cm) dimensions, which translate in V$_\pi$L$<$1Vcm. Si and LiNbO$_3$ (LN) IQ modulators do not currently meet these requirements, because V$_{\pi}$L$>$1Vcm. Here, we report a double single-layer graphene (SLG) Mach-Zehnder modulator (MZM) with pure phase modulation in the transparent regime, where optical losses are minimised and remain constant with increasing voltage. Our device has $V_{\pi}L\sim$0.3Vcm, matching state-of-the-art SLG-based MZMs and plasmonic LN MZMs, but with pure phase modulation and low insertion loss ($\sim$5dB), essential for IQ modulation. Our $V_\pi L$ is$\sim$5 times lower than the lowest thin-film LN MZMs, and$\sim$3 times lower than the lowest Si MZMs. This enables devices with complementary metal-oxide semiconductor compatible V$_\pi$L ($<$1Vcm) and smaller footprint than LN or Si MZMs, improving circuit density and reducing power consumption by one order of magnitude.

The integration of optoelectronic devices, such as transistors and photodetectors (PDs), into wearables and textiles is of great interest for applications such as healthcare and physiological monitoring. These require flexible/wearable systems adaptable to body motions, thus materials conformable to non-planar surfaces, and able to maintain performance under mechanical distortions. Here, we prepare fibre PDs combining rolled graphene layers and photoactive perovskites. Conductive fibres ($\sim$500$\Omega$/cm) are made by rolling single layer graphene (SLG) around silica fibres, followed by deposition of a dielectric layer (Al$_{2}$O$_{3}$ and parylene C), another rolled SLG as channel, and perovskite as photoactive component. The resulting gate-tunable PDs have response time$\sim$5ms, with an external responsivity$\sim$22kA/W at 488nm for 1V bias. The external responsivity is two orders of magnitude higher and the response time one order of magnitude faster than state-of-the-art wearable fibre based PDs. Under bending at 4mm radius, up to$\sim$80\% photocurrent is maintained. Washability tests show$\sim$72\% of initial photocurrent after 30 cycles, promising for wearable applications.

The unique optoelectronic properties of single layer graphene (SLG) are ideal for the development of photonic devices across a broad range of frequencies, from X-rays to microwaves. In the terahertz (THz) range (0.1-10 THz frequency) this has led to the development of optical modulators, non-linear sources, and photodetectors, with state-of-the-art performances. A key challenge is the integration of SLG-based active elements with pre-existing technological platforms in a scalable way, while maintaining performance level unperturbed. Here, we report on the development of room temperature THz detection in large-area SLG, grown by chemical vapor deposition (CVD), integrated in antenna-coupled field effect transistors. We selectively activate the photo-thermoelectric detection dynamics, and we employ different dielectric configurations on SLG on Al2O3 with and without large-area CVD hBN capping to investigate their effect on SLG thermoelectric properties underpinning photodetection. With these scalable architectures, response times ~5ns and noise equivalent powers ~1nWHz-1/2 are achieved under zero-bias operation. This shows the feasibility of scalable, large-area, layered materials heterostructures for THz detection., Comment: 15 pages, 4 Figures. The following article has been accepted by Applied Physics Letters. After it is published, it will be found at the link https://doi.org/10.1063/5.0097726

Hot electrons dominate the ultrafast ($\sim$fs-ps) optical and electronic properties of metals and semiconductors and they are exploited in a variety of applications including photovoltaics and photodetection. We perform power-dependent third harmonic generation measurements on gated single-layer graphene and detect a significant deviation from the cubic power-law expected for a third harmonic generation process. We assign this to the presence of hot electrons. Our results indicate that the performance of nonlinear photonics devices based on graphene, such as optical modulators and frequency converters, can be affected by changes in the electronic temperature, which might occur due to increase of absorbed optical power or Joule heating.