Search

To understand how martensitic transformation (MT) in polycrystalline NiTi shape memory alloy (SMA) proceeds under external stress, we evaluated recoverable transformation strains and plastic strains generated by the forward MT in nanocrystalline NiTi wire cooled under tensile stresses 0-600 MPa, determined textures in martensite and reconstructed martensite variant microstructures within the selected grains of the cooled wire. The obtained findings show that the forward MT proceeding under external stresses gives rise to characteristic recoverable transformation strains, plastic strains, martensite variant microstructures and martensite textures. MT occurring upon cooling under stresses exceeding 100 MPa creates martensite variant microstructures consisting of single domain of partially detwinned laminate of (001) compound twins filling entire grains. The recoverable transformation strain increases with increasing stress, reaches maximum ~5% at ~200 MPa stress, and remains constant with further increasing stress up to 600 MPa. Starting from 100 MPa stress, the forward MT generates also plastic strains, the magnitude of which also increases with increasing stress. We propose that, in the absence of external stress, the forward MT takes place via propagation of strain compatible habit plane interfaces between austenite and second order laminate of (001) compound twins. When the forward MT takes place under external tensile stress, it occurs equally, but the newly created martensite immediately reorients into single domains of (001) compound twins, partially detwins and deforms plastically under the action of the external stress. The plastic strain generated by the forward MT upon cooling under stress is attributed to the [100](001) dislocation slip in martensite at low stresses and plastic deformation of martensite by kwinking at high stresses., Comment: 35 pages, 15 figures

Superelastic NiTi 1 shape memory alloy (SMA) wire was subjected to thermomechanical loading tests in tension to evaluate stress and temperature conditions under which the wire deforms plastically. Although the alloy demonstrated a very high resistance to plastic deformation in both the austenite and martensite phases, incremental plastic strains were recorded whenever the B2 cubic to B19' monoclinic martensitic transformation (MT) took place under external stress. To shed light on the origin of the functional fatigue presumably originating from the accumulated plastic strains, special closed-loop thermomechanical loading tests were performed to evaluate recoverable and plastic strains generated by the forward and reverse MTs under external stress. These experiments revealed that both forward and reverse MTs generate well-defined incremental plastic strains only if they occur above certain stress thresholds. Specifically, the forward MT upon cooling under stresses up to 500 MPa does not produce plastic strain or lattice defects, whereas the reverse MT upon heating generates plastic strains even under stress as low as 100 MPa. It is proposed that plastic deformation generated by martensitic transformations under low stresses takes place by [100](001) dislocation slip in martensite and while under high stresses it occurs via kwinking deformation in martensite. The characteristic thresholds and magnitudes of plastic strains generated by the forward and reverse MTs define the functional fatigue limits for NiTi. Specifically, the stress-strain-temperature responses recorded in closed-loop thermomechanical tests remain stable if both forward and reverse MTs occur below these thresholds. Conversely, they become unstable and exhibit predictable ratcheting if the MTs exceed these thresholds., Comment: 37 pages, 14 figures

Residual stress engineering is very widely used in the design of new advanced lightweight materials. For metallic glasses the attention has been on structural changes and rejuvenation processes. High energy scanning X-ray diffraction strain mapping reveals large elastic fluctuations in metallic glasses after deformation under triaxial compression. Microindentation hardness mapping hints to a competing hardening-softening mechanism after compression and further reveals the complementary effects of stress and structure modulation. Transmission electron microscopy proves that structure modulation under room temperature deformation relates to the shear band formation that closely correlates to the distribution of elastic heterogeneities. Molecular dynamics simulations provide an atomistic understanding of the complex shear band activity in notched metallic glasses and the related fluctuations in the strain/stress heterogeneity. Thus, future focus should be given to stress engineering and elastic heterogeneity that together with structure modulation may allow to design metallic glasses with enhanced ductility and strain hardening ability.

Slug flows in a tube are affected by surface tension and contact lines, especially under microgravity. Numerical analyses and experiments are conducted of slug flows in small-diameter tubes with horizontal, inclined and vertical orientations. A PID-controlled, meter-long platform capable of following specified motions is used. An improved understanding of the contact line boundary condition for steady and unsteady contact-line motion is expected. Lastly, a direct fluid-handling method using nonlinear oscillatory motion of a tube is presented.