Search

Abstract The current research on noncircular hobbing mainly focuses on the linkage model and motion realization. However, the intermittent cutting characteristics of hobbing would increase uncertainties in the manufacturing process. In this paper, a hobbing machining model with tool-shifting characteristics was proposed to solve the problems of cutting force fluctuation and inconsistency of tooth profile envelope accuracy at different positions of the pitch curve in noncircular gear hobbing. Based on the unit cutting force coefficient method, the undeformed chip volume generated by interrupted cutting was used to characterize the fluctuation trend of the hobbing force. The fluctuation characteristics of the cutting force generated by different hobbing models were compared and analyzed. Using the equivalent gear tooth and hob slotting numbers, an analysis model of the tooth profile envelope error of the noncircular gear was constructed. Subsequently, the tooth profile envelope errors at different positions of the pitch curve were compared and analyzed based on the constructed model. The transmission structure of the electronic gearbox was constructed based on the proposed hobbing model, and the hobbing experiment was conducted based on the self-developed noncircular gear CNC hobbing system. This paper proposes a hobbing method that can effectively suppress the fluctuation of the peak and whole circumference cutting force and reduce the maximum envelope error of the whole circumference gear teeth.

Topological modification of gear surface is used to achieve better meshing transmission performance and accuracy. However, in the traditional gear modification grinding process, the topological modified tooth surface is usually simplified to the control of profile modification and lead modification, which is difficult to achieve the coincidence of machining and design. To solve this problem, a flexible topology flank modification method based on polynomial interpolation function is proposed in this paper. Based on the gear meshing principle and polynomial interpolation technology, the method realizes a topological modification of the gear by controlling multiple axes’s position on the machine tool. Firstly, a gear grinding model of worm grinding wheel with controllable grinding precision is established. Then the axial, radial and tangential motions of worm grinding wheel is expressed as fifth order polynomials, and the polynomial coefficients is optimized by particle swarm optimization algorithm. Finally, numerical simulation was used to compare the proposed method with the sensitivity matrix method, and the results showed that the proposed method had better optimization effect. The new flexible topological modification method can realize the topological modification machining by controlling the motion of each axis of the tool, and the problem that the topological modification machining does not match the design is solved.

Squirrels of temperate zones commonly store nuts or seeds under leaf litter, in hollow logs, or even in holes in the ground; however, in the humid rainforests of Jianfengling in Hainan, South China, we show that some flying squirrels cache elliptical or oblate nuts by hanging them securely in vegetation. These small flying squirrels were identified as Hylopetes phayrei electilis (G. M. Allen, 1925) and Hylopetes alboniger (Hodgson, 1870), in video clips captured of their behavior around focal nuts. Squirrels chewed grooves encircling ellipsoid nuts or distributed on the bottoms of oblate nuts, and then used these grooves to fix nuts tightly between small twigs 0.1–0.6 cm in diameter that were connected at angles of 25–40°. The grooves carved on the nuts (concave structure) connected with Y-shaped twigs (convex structure) and thus firmly affixed the nuts to the plant in a way similar to a mortise-tenon joint used in architecture and carpentry. Cache sites were on small plants located 10–25 m away from the closest potentially nut-producing tree, a behavior that likely reduces the discovery and consumption of the nuts by other animals. The adaptive squirrel behavior that shapes and fits nuts between twigs seems to be directed at providing more secure storage that increases food supply during dry periods in a humid tropical rainforest. In addition to providing such benefits for the squirrels, we suggest that this behavior also impacts the distribution of tree species in the forest.

Aiming at current problems of low gear shaping efficiency and large cutting force fluctuations in non-circular gears，and based on the gear shaping cutting force modeling and the relationship established between the cutting force and the cutting area，the article proposes circular feed rate optimization method based on constant cutting force constraint. To improve the processing efficiency of the workpiece and reduce the fluctuation of the cutting force，with the machine parameters and the constant cutting area as the constraints，and taking the curvature radius of the pitch curve as the segmented basis，an optimization model of variable circumferential feed is established. Through the analysis of the third-order elliptic gear slotting example，the effectiveness of the variable circle feed optimization model is verified. The segmented optimization avoids frequent and severe changes in the speed of each axis of motion，and realizes the optimization of the processing parameters of non-circular gears.

In order to process the workpiece with internal gearing power honing technology，the honing wheel is usually dressed with the customized diamond dressing wheel corresponding to the workpiece. A method of internal gearing power honing modification based on flexible dressing of honing wheel is proposed to increase the commonality of diamond dressing wheel，reduce the cost of internal gearing power honing technology. Firstly，the tooth surface mathematical model of dressing and honing is established according to the motion relationship of each axis of gear honing machine. Then，the multi axis linkage of honing wheel dressing is expressed in polynomial form，the influence of each axis movement on the final workpiece tooth surface is expressed as sensitivity matrix，and the polynomial coefficients of each axis are optimized with the target modification tooth surface. Finally，the final tooth surface of the workpiece is calculated according to the optimized motion parameters of honing，and the tooth contact is analyzed. The results show the standard diamond dressing wheel can be used for flexible dressing of honing wheel，and the effective modification workpiece can be machined finally.

Hobbing is one of the most important gear machining process，forming process of which is complicated and involves a large number of cutting parameters. In order to quantify the influence of machining parameters on the cutting force in hobbing process，a method for predicting the cutting force of gear hobbing based on three-dimensional （3D） geometric simulation is studied. The relative position and motion relationship between hob and workpiece are determined according to the geometric parameters and cutting parameters of hob and workpiece， the 3D simulation of hobbing process is realized in CAD environment，and the 3D model of undeformed chips is obtained. According to the selected cutting force model，the instantaneous cutting force of a single cutting edge is calculated by using the cross-section size of undeformed chips model，and the overall cutting force process of hobbing is obtained. The influence of different cutting parameter on hobbing cutting force is analyzed quantitatively. The predictive model helps to optimize the design of the gear hobbing process to improve the quality and efficiency of the machining and reduce the cost.

Objective To investigate the effect of ursolic acid (UA) combined with HDAC2 inhibitor (SA) on the growth and proliferation of human hepatocarcinoma cell line HepG2 and its potential mechanism. Methods CCK-8, optical microscopy, cell clone formation and flow cytometry were used to evaluate the inhibitory effects of UA and SA on HepG2 cells after UA and SA monotherapy or combination therapy. Western blot was used to analyze the expression of HDAC2, AC-α-tubulin CDK2, CDK1, Bax, Bcl-2, and cleaved-PARP in the HepG2 cells after the treatment. Results UA had a significant inhibitory effect on the growth of HepG2 with a concentration and time-dependent manner (P＜0.01); UA inhibited HepG2 cell cloning, and the inhibitory effect was more significant when combined with SA (P＜0.01). UA combined with SA blocked HepG2 cell cycle at G1 phase (P＜0.01); HDAC2 was highly expressed in human hepatoma SMMC-7721, HepG2, and PLC5 cell lines, and UA combined with SA significantly down-regulated HDAC2, Bcl-2, CDK2 and cyclin E1 protein expression, while up-regulated the expression of AC-α-tubulin, Bax and cleaved-PARP. Conclusions The combined application of UA and SA has a synergistic inhibitory effect on the proliferation of HepG2 cells.

Intracranial hemorrhage (ICH), the second most common subtype of stroke, exacerbates the disruption of the blood-brain barrier (BBB), leading to vasogenic edema, plasma protein extravasation, and infiltration of neurotoxic substances. The clearance capacity of the brain plays a crucial role in maintaining BBB homeostasis and facilitating patient recovery after hemorrhage. This study aimed to investigate the effect of circadian rhythms on BBB function, neuronal damage, and clearance capabilities. The transwell model and hemoglobin were co-cultured to simulate the BBB environment after ICH. After intervention with different light groups, neuronal apoptosis was determined, glial phagocytosis was analyzed, the expression of endogenous clearing-related proteins aquaporin 4 (AQP4) and low-density lipoprotein receptor-related protein 1 (LRP1) was detected by western blotting and immunofluorescence dual standard method, and the expression of the tight junction protein occludin and melatonin receptor 1A (MTNR1A) was quantitatively analyzed. Circadian rhythms play a key role in maintaining the integrity of the BBB, reducing oxidative stress-induced neuronal damage, and improving microglial phagocytosis. Meanwhile, the expression of occludin and MTNR1A in neurovascular unit (NVU) co-cultured with hemoglobin improved the expression of AQP4 and LRP1, the key proteins in the NVU's endogenous brain clearance system. Circadian rhythm (alternating black and white light) protects the NVU BBB function after ICH, promotes the expression of proteins related to the clearance of the hematoma, provides new evidence for the clinical treatment of patients recovering from ICH, and improves the circadian rhythm to promote brain metabolism and hematoma clearance. [ABSTRACT FROM AUTHOR]

Seeds from two odd-polyploid Ulmus americana L., both open-pollinated from surrounding tetraploid trees, were analyzed for nuclear genome size by using flow cytometry. Seeds from the triploid were predominantly aneuploid, with DNA content intermediate between triploid and tetraploid levels, but substantial numbers of tetraploid and pentaploid seeds were observed. No seeds of even ploidy were found in progeny of the pentaploid; seeds of the pentaploid were pentaploid, aneuploid with DNA content intermediate between tetraploid and pentaploid levels, or aneuploid with DNA content intermediate between pentaploid and hexaploid levels. Seeds from both trees often gave two peaks via flow cytometry, indicating the presence of two genetically distinct embryos in the same seed. The frequency of polyembryony in the sample is much higher than the frequency of seeds that yield multiple seedlings, suggesting that the formation of two genetically distinct embryos, followed by abortion of one embryo, is common in elms.

Extensive and high residue variations in enrofloxacin (ENR) exist in different aquatic products. A novel quantitative method for measuring ENR using high-performance liquid chromatography–tandem mass spectrometry was developed employing enrofloxacin-d5 (ENR-d5) and enrofloxacin-d3 (ENR-d3) as isotope surrogates. This reduced the deviation of detected values, which results from the overpass of the linear range and/or the large difference in the residue between the isotope standard and ENR, from the actual content. Furthermore, high residue levels of ENR can be directly diluted and re-calibrated by the corresponding curve with the addition of high levels of another internal surrogate without repeated sample preparation, avoiding the overflow of the instrument response. The validation results demonstrated that the method can simultaneously determine ENR residues from MQL (2 µg/kg) to 5000 × MQL (method quantification limit) with recoveries between 97.1 and 106%, and intra-precision of no more than 2.14%. This method realized a wide linear calibration range with dual deuterated isomers, which has not been previously reported in the literature. The developed method was successfully applied to the analysis of ENR in different aquatic products, with ENR residue levels varying from 108 to 4340 μg/kg and an interval of precision in the range of 0.175~6.72%. These results demonstrate that batch samples with a high variation in ENR residues (over the linear range with a single isotope standard) can be detected by the dual isotope surrogates method in a single sample preparation process.

This paper proposes a method to study the machining error when one is generating gear grinding based on the mapping relationship between the grinding wheel surface and the tooth flank. The profile of the grinding wheel after grinding is collected, and the theoretical tooth flank is derived according to a model of generating gear grinding. By comparing the normal deviation of the theoretical tooth flank with the measured tooth flank, the machining error characteristics are identified. Firstly, the mathematical model of generating gear grinding is established according to a multi-body theory and coordinate transformation. Secondly, the experiments of the lead modification for helical gear were performed on a YW7232 CNC gear grinding machine. The tooth flank twist compensation function was turned off in experiments No. 1–No. 3, and it was turned on in experiments No. 4–No. 6, while the other process parameters kept the same. Then, the corresponding theoretical tooth flank data were derived from the grinding wheel surface which were measured using the laser profilometer LJ-V7000. Finally, the machining error characteristics were obtained by analyzing the difference between the theoretical and measured tooth flank deviations. The result of this paper can provide theoretical and practical references for the improvement of the gear grinding accuracy and gear modification design.

As a non-classical post-translational modification, O-linked β-N-acetylglucosamine (O-GlcNAc) modification (O-GlcNAcylation) is widely found in human organ systems, particularly in our brains, and is indispensable for healthy cell biology. With the increasing age of the global population, the incidence of neurodegenerative diseases is increasing, too. The common characteristic of these disorders is the aggregation of abnormal proteins in the brain. Current research has found that O-GlcNAcylation dysregulation is involved in misfolding or aggregation of these abnormal proteins to mediate disease progression, but the specific mechanism has not been defined. This paper reviews recent studies on O-GlcNAcylation's roles in several neurodegenerative disorders such as Alzheimer's disease, Parkinson's disease, amyotrophic lateral sclerosis, Huntington's disease, Machado-Joseph's disease, and giant axonal neuropathy, and shows that O-GlcNAcylation, as glucose metabolism sensor, mediating synaptic function, participating in oxidative stress response and signaling pathway conduction, directly or indirectly regulates characteristic pathological protein toxicity and affects disease progression. The existing results suggest that targeting O-GlcNAcylation will provide new ideas for clinical diagnosis, prevention, and treatment of neurodegenerative diseases. [ABSTRACT FROM AUTHOR]

Mosquitoes historically threatened human health; the major mosquito-related global health issues include malaria, dengue fever, yellow fever, and Zika, as well as several other vector-borne outbreaks. Here, the EtOAc extract of the mangrove sediment fungus Penicillium brefeldianum ABC190807 exerted larvicidal activities against the third instar larvae of Aedes aegypti with an LC50 of 0.089 mg/mL. One new purinyl-steroid (ergosta-4,6,8(14),22-tetraen-3-(6-amino-9H-purin-9-yl) (1)), along with six (2–7) known compounds, were isolated from the EtOAc extract of Penicillium brefeldianum ABC190807. Structures of the compounds were elucidated via 1D/2D NMR and HR-ESI-MS data. Respective spectral data were compared with those of known compounds. Among all compounds whose larvicidal activity against the third instar larvae of Aedes aegypti was evaluated, compounds 2 and 7 showed larvicidal activity with respective LC50 values of 0.452 and 0.337 mg/mL.

To improve the stability and accuracy of non-circular gear transmission, a beveloid non-circular gear transmission scheme was developed to reduce the meshing impact and achieve backlash adjustment. When using the beveloid rack as the medium, the instantaneous contact line of the beveloid non-circular gear pair was shown to be a straight line, and the tooth surface was shown to be a ruled surface based on the transmission relationship between the rack centerline and the non-circular pitch curve. The zero-modification method was employed to develop the beveloid non-circular gear. Further, the generation method for the tooth profile of the modified non-circular gear was reviewed, and a digital solid model was developed for the beveloid non-circular gear. The physical contact simulation method was used to analyze the meshing backlash, and the influence of the axial displacement adjustment on the meshing backlash of the gear pair was obtained. By considering a pair of beveloid elliptic gears as an example, machining and transmission experiments were conducted, with results showing smooth gear-pair meshing and the anticipated backlash adjustment effect.

In the silicone material extrusion (MEX) process, product profile error and performance defects are common problems due to changes in strand shape. A process optimization method considering strand morphology, denoted as SMO, which allows adjustment of the strand shape by adjusting process parameters during the printing process is presented. The relation between process parameters (extrusion speed, moving speed, nozzle height, and nozzle radius) and the geometric parameters (strand width and strand height) of the cross-section, as well as the relationship between strand spacing, layer height, and process parameters in no void constraint is discussed and verified. SMO was utilized to produce specimens with tunable strand width and strand height. Tensile tests and profile scans were performed to compare SMO with other methods to verify its feasibility. Specimens fabricated using the SMO method have up to a 7% increase in tensile strength, up to a 10% reduction in processing time, and about a 60% reduction in strand height error over unused ones. The results show that the SMO method with adjustable strand width can effectively balance efficiency and mechanical properties compared to uniform infill, and the SMO method with adjustable strand height can provide higher accuracy compared to uniform strand height. The proposed method is validated and improves the efficiency and accuracy of silicone MEX.

In the Asian corn borer (ACB), Ostrinia furnacalis (Guenée), diapause is governed by a multigenetic constitution that responds to daylength and temperature with seasonality. The ACB displays uni- or multivoltinism, depending on its geographic specificity. Hence, warmer temperatures may result in alternation of voltinism in the ACB, which will help in understanding the ecological consequences of climate warming on insects. In the present study, we investigated the voltinism in two natural populations from Harbin (H) and Gongzhuling (G) as well as a laboratory (L) population (established from the H population in 2017) of the ACB, at ambient and elevated atmospheric CO2 (aCO2 390 μL/L and eCO2 750 μL/L) and temperature (aT and Et = At + 2 °C). From the diapause response, both the uni- and multivoltine ecotypes were coexisting in the H population. The neonate occurrence date of 50% individuals that induced diapause was ca. 10 days later in the G population than in the H population, but it was about 10 days earlier than in the L population. Comparing to the dates of onset and the peak of diapause induction, the G and L populations were less variable than the H population in response to a short and/or shortening daylength in the field. The univoltine individuals could not be eliminated completely after 19 generations of selection. Diapause incidence decreased with a climate-warming scenario, which was temporally specific and could be overridden by significantly low daily average temperatures. The eCO2 did not directly impact the voltinism. On the basis of voltinism, the H population was sympatric for uni- and multivoltine ecotypes, with multivoltinism being dominant. The univoltinism trait was recessive. Climate warming could significantly override the effect of photoperiod, which was yearly dependent. Warmer temperatures and a decreased latitude (shortened daylength), and their interaction, would drive ACB evolution toward diapause homogeneity for multivoltinism.

Background:. Obstructive sleep apnea (OSA) syndrome has a negative impact on the health of millions of adolescents and youth. The aim of this study was to evaluate the associations of OSA syndrome with obesity and cardiometabolic risk factors among adolescents and youth at risk for metabolic syndrome (MS). Methods:. A total of 558 subjects aged 14-28 years were recruited from the Beijing Child and Adolescent Metabolic Syndrome Study. Each underwent a 2-h oral glucose tolerance test (OGTT), echocardiography, and liver ultrasonography. Anthropometric measures, blood levels of glucose, lipids, and liver enzymes were assessed. Subjects with high or low risk for OSA were identified by Berlin Questionnaire (BQ). Results:. Among the subjects in obesity, 33.7% of whom were likely to have OSA by BQ. Subjects with high risk for OSA had higher neck and waist circumference and fat mass percentage compared to those with low risk for OSA (P < 0.001). Moreover, significant differences in levels of lipids, glucose after OGTT, and liver enzymes, as well as echocardiographic parameters were found between the two groups with high or low risk for OSA (P < 0.05). The rates of nonalcoholic fatty liver disease (71.0% vs. 24.2%), MS (38.9% vs. 7.0%), and its components in high-risk group were significantly higher than in low-risk group. Conclusions:. The prevalence of OSA by BQ was high in obese adolescents and youth. A high risk for OSA indicates a high cardiometabolic risk. Mechanisms mediating the observed associations require further investigation.