Search

This note presents new results on the design of the process noise covariance matrix in Kalman filtering. The proposed design belongs to the realm of worst case methods: the optimal covariance is sought such as to maximize an upper bound on the estimation error matrix under a total budget constraint. Optimality conditions are derived along with a numerical algorithm for iterative approximation of the optimal solution. The optimal solution features a few time points and the associated covariances. Broadly speaking, the process noise is only “active” at the time points that enhance its controllability. The importance of the method is that it bounds from above the performance of any Kalman filter with a different design. Monte Carlo simulations on a double harmonic system numerical example illustrate the good convergence, performance, and low sensitivity to initial guesses of the proposed method. Moreover, in terms of estimation accuracy, the Kalman filter with the optimal design outperforms a robust $H_2$ filter designed to cope with an equivalent uncertainty. [ABSTRACT FROM AUTHOR]

The paper concerns compressed sensing methods in the quaternion algebra. We prove that it is possible to uniquely reconstruct – by ℓ 1 norm minimization – a sparse quaternion signal from a limited number of its real linear measurements, provided the measurement matrix satisfies so-called restricted isometry property with a sufficiently small constant. We also provide error estimates for the approximated reconstruction of a non-sparse quaternion signal from noisy and noiseless data. [ABSTRACT FROM AUTHOR]

The integer order differentiation by integration method based on the Jacobi orthogonal polynomials for noisy signals was originally introduced by Mboup, Join and Fliess. We propose to extend this method from the integer order to the fractional order to estimate the fractional order derivatives of noisy signals. Firstly, two fractional order differentiators are deduced from the Jacobi orthogonal polynomial filter, using the Riemann–Liouville and the Caputo fractional order derivative definitions respectively. Exact and simple formulae for these differentiators are given by integral expressions. Hence, they can be used for both continuous-time and discrete-time models in on-line or off-line applications. Secondly, some error bounds are provided for the corresponding estimation errors. These bounds allow to study the design parameters' influence. The noise error contribution due to a large class of stochastic processes is studied in discrete case. The latter shows that the differentiator based on the Caputo fractional order derivative can cope with a class of noises, whose mean value and variance functions are polynomial time-varying. Thanks to the design parameters analysis, the proposed fractional order differentiators are significantly improved by admitting a time-delay. Thirdly, in order to reduce the calculation time for on-line applications, a recursive algorithm is proposed. Finally, the proposed differentiator based on the Riemann–Liouville fractional order derivative is used to estimate the state of a fractional order system and numerical simulations illustrate the accuracy and the robustness with respect to corrupting noises. [ABSTRACT FROM AUTHOR]

In this paper, we present the globally optimal distributed Kalman filtering fusion with singular covariances of filtering errors and measurement noises. The following facts motivate us to consider the problem. First, the invertibility of estimation error covariance matrices is a necessary condition for most of the existing distributed fusion algorithms. However, it can not be guaranteed to exist in practice. For example, when state estimation for a given dynamic system is subject to state equality constraints, the estimation error covariance matrices must be singular. Second, the proposed fused state estimate is still exactly the same as the centralized Kalman filtering using all sensor raw measurements. [ABSTRACT FROM AUTHOR]

This paper is concerned with the moving horizon estimation (MHE) problem for linear discrete-time systems with limited communication, including quantized measurements and packet dropouts. The measured output is quantized by a logarithmic quantizer and the packet dropout phenomena is modeled by a binary switching random sequence. The main purpose of this paper is to design an estimator such that, for all possible quantized errors and packet dropouts, the state estimation error sequence is convergent. By choosing a stochastic cost function, the optimal estimator is obtained by solving a regularized least-squares problem with uncertain parameters. The proposed method can be used to deal with the estimation and prediction problems for systems with quantized errors and packet dropouts in a unified framework. The stability properties of the optimal estimator are also studied. The obtained stability condition implicitly establishes a relation between the upper bound of the estimation error and two parameters, namely, the quantization density and the packet dropout probability. Moreover, the maximum quantization density and the maximum packet dropout probability are given to ensure the convergence of the upper bound of the estimation error sequence. Finally, an illustrative example is given to demonstrate the effectiveness of the proposed method. [ABSTRACT FROM PUBLISHER]

Standard Kalman filter adopts constant covariance of measurement noise. When statistical characteristics of measurement noise changes, estimation error increases, which results in filtering divergence. An adaptive federated Kalman filter was proposed with fuzzy adaptive Kalman filter but not Kalman filter in the subsystem of federated Kalman filter, and the weighted coefficient of covariance matrix was adjusted by fuzzy inference algorithm real-timely. It made the measurement noise of the dynamic equation close to the truth level. When it is applied to multi-sensor attitude determination systems, simulation results demonstrate the true effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

We address the problem of state estimation for a class of nonlinear systems with measurement noise in the context of feedback control. It is well-known that high-gain observers are robust against model uncertainty and disturbances, but sensitive to measurement noise when implemented in a feedback loop. This work presents the benefits of a nonlinear-gain structure in the innovation process of the high-gain observer, in order to overcome the tradeoff between fast state reconstruction and measurement noise attenuation. The goal is to generate a larger observer gain during the transient response than in the steady-state response. Thus, by reducing the observer gain after achieving satisfactory state estimates, the effect of noise on the steady-state performance is reduced. Moreover, the nonlinear-gain observer presented in this paper is shown to surpass the system performance achieved when using comparable linear-gain observers. The proof argues boundedness and ultimate boundedness of the closed-loop system under the proposed output feedback. [ABSTRACT FROM AUTHOR]

Optimal filters for nonlinear systems are in general difficult to derive or implement. The common approach is to use approximate solutions such as extended Kalman filters, ensemble filters or particle filters. However, no optimality properties can be guaranteed by these approximations, and even the stability of the estimation error cannot often be ensured. Another relevant issue is that, in most practical situations, the system whose variables have to be estimated is not known, and a two-step procedure is adopted, based on model identification from data and filter design from the identified model. However, the designed filter may display large performance deteriorations in the case of modeling errors. In this paper, a new approach overcoming these issues is proposed, allowing the design of optimal filters for nonlinear systems in both the cases of known and unknown system. The approach is based on the direct filter design from a set of data generated by the system. Either experimental or simulated data can be used for design. A bound on the number of data necessary to ensure a given filter accuracy is also provided, showing that the proposed approach is not affected by the curse of dimensionality. [ABSTRACT FROM AUTHOR]

This technical note studies some of the challenging issues on moving horizon state estimation for networked control systems in the presence of multiple packet dropouts in both sensor-to-controller and controller-to-actuator channels, which both situations are modeled by two mutually independent stochastic variables satisfying the Bernoulli binary distribution. Compared with standard Kalman filter, this study proposes a novel moving horizon estimator to deal with the uncertainties induced from the multiple packet dropouts, which has a larger degree of freedom to obtain better behavior by tuning the weight parameters. A sufficient condition for the convergence of the norm of the average estimation error is also presented to guarantee the performance of the estimator. Finally, a real-time simulation experiment is presented to demonstrate the feasibility and efficiency of the proposed method. [ABSTRACT FROM AUTHOR]

This note presents a new algorithm that is designed to identify the frequency, magnitude, phase and offset of a biased sinusoidal signal. The structure of the algorithm includes an orthogonal system generator based on a second-order generalized integrator. The proposed strategy has the advantages of a fast and accurate signal reconstruction capability and a good rejection to noise. [ABSTRACT FROM PUBLISHER]