Search

The total/partial oil change treatment can affect the furfural partitioning in oil-paper-pressboard insulation, resulting in poor accuracy of furfural analysis. Moreover, due to the high cost of total oil change, partial oil change is more practical during transformer operation. This paper investigates the furfural partitioning in the oil-paper-pressboard insulation under partial oil change conditions. First, the initial furfural partitioning equation with non-oil change is proposed based on the obtained furfural content in oil, paper, and pressboard. Then, the modified furfural partitioning model under partial oil change condition is established by introducing a correction factor. Moreover, a preliminary correction scheme for the furfural partitioning model considering the influence of moisture and acid is provided. Finally, furfural content in oil-Kraft paper and oil-thermally upgraded Kraft (TUK) paper insulation are discussed, and results indicate that the proposed modified furfural partitioning model is not suitable for the oil-TUK paper insulation. This work can provide theoretical support for furfural analysis of oil-immersed transformers. [ABSTRACT FROM AUTHOR]

Thermal aging of insulation paper occurs during transformer operation, with the water produced during aging accelerating the thermal aging process. Insulation paper aging largely determines the operational life of a transformer pressboard; accordingly, research pertaining to insulation paper enhancement is significant with respect to the functional safety of transformers. Within molecular research, particularly that focusing on molecular simulation, appropriate force field selection is paramount in order to acquire accurate results, in addition to appropriately reflecting cellulose thermal stability and associated degradation mechanisms. In the current study, two diverse cellulose models (water only; water, dicyandiamide, melamine and polyacrylamide) are developed and analyzed. Numerous model variables, including the diffusion coefficient of water and cellulose chain distance, are collated, in order to examine the effects of amines on the thermal stability of cellulose. Additionally, a novel insulation paper is formulated by combining traditional insulation paper with three diverse amines; an accelerated aging experiment is thus undertaken, comparing traditional and modified insulation paper samples at 110 °C, together with periodic assessment of both microwater content and the degree of polymerization (DP). Results indicate that during transformer operation, a higher degree of elasticity is associated with the modified insulation paper, thus significantly increasing its toughness and extensibility, in parallel with decreasing it brittleness. Results also show that the DP associated with cellulose comprising the modified insulation paper decreases at a reduced rate, with measured water content significantly less than that of traditional insulation paper. Simulation results are consistent with experimental findings. Therefore, it may be concluded that the thermal aging properties of cellulose significantly improve upon addition of dicyandiamide, melamine, and polyacrylamide as thermal stabilizers. [ABSTRACT FROM AUTHOR]

This paper presents a modeling practical works project of electrical engineering, proposed to the first-year students of the University Institute of Technology in France, during the COVID-19 pandemic. The objective of this paper is twofold. The first objective is to present to the students the opportunities of modeling and calculation development of a spreadsheet software in their professional lives. The second objective is to create a file that automatically calculates all the current and voltage values at each point of any alternative electrical circuit. The aim of this paper, geared toward students, is to bring them to build their own numerical remote lab, autonomously. Therefore, pedagogical keys are given along the reading of this document to help them to progress, both on electrical circuits conceptual understanding with series and parallel RLC circuits and on their computation in a spreadsheet software. As a conclusion, this paper can be used as a base to develop remote modeling practical works of many and different devices, as well as a database starting point of such analytical models. [ABSTRACT FROM AUTHOR]

Transformer oil and insulation paper are subject to the combined effects of the electric field and temperature operations, which significantly impact insulation deterioration. This article designs a comparative test of the electro-thermal combined aging to obtain several characteristic parameters for the aging degree of oil-pressboard insulation. Molecular dynamics are used to establish a mixed molecular model of oil-pressboard insulation to simulate the pyrolysis reactions at high temperatures using the ReaxFF force field. The microscopic effects of the electric field on the aging of oil-pressboard insulation are studied. The rationale of the simulation model is verified from experimental results, and the trend of the reactants and products in the reaction process was considered to determine the influence mechanism of electric–thermal coupling on oil-pressboard insulation. The experimental results show that thermal stress remains the most important factor toward cracking in insulation paper. The acid value and furfural formation rate in oil increase, and the polymerization degree of the insulation paper decreases rapidly after the combined electric and thermal aging. In addition, the molecular dynamics simulations show that pyrolysis increases the bond energy, promotes repulsion between atoms, and leads to fractured bonds. The addition of the electric field increases the susceptibility of the chemical bonds in cellulose molecules to breakage. The morphology of the cellulose chain then changes, and the diffusion of small molecules intensifies. This study reveals the mechanism of insulation aging under electro-thermal coupling through combined macroscopic testing and molecular dynamics simulations. [ABSTRACT FROM AUTHOR]

This paper offers a comprehensive overview of the IEEE Transactions on Engineering Management (IEEE TEM) from 1985 to 2017. This paper employs a mixed-method examination based on an in-depth interview with the new editor-in-chief regarding the challenges for the future of IEEE TEM, along with a bibliometric analysis of the journal. By using Web of Science Core Collection data, the analysis maps the knowledge produced and disseminated by IEEE TEM, revealing the most cited papers, the most frequently occurring keywords and the interconnection between them, the most prolific authors and their coauthorship network, and the most prolific countries for published articles. This paper also shows the main avenues of research covered by IEEE TEM and their evolution through the analysis of the correlation of keywords. This paper offers an example application of a mixed-method bibliometric analysis, seeking to extend the quantitative findings by including other sources of data. [ABSTRACT FROM AUTHOR]

In a series of papers by Pawlikowski and his team, they warned about a deep crisis of credibility in simulation studies for the performance evaluation of telecommunication networks. The goal of this article is to revisit the investigation on simulation credibility and to extend the previous research in this area by presenting the results of a comprehensive survey of over 8370 IEEE publications (2007?2009) on telecommunication networks which appeared in the proceedings of IEEE Transactions on Communications (TC), IEEE/ACM Transactions on Networking (TN), IEEE Infocom, IEEE ICC, and IEEE Globecom. These proceedings were selected based on their popularity and relevance to our study. Besides simulation credibility, we also report on the commonly used simulation tools and performance analysis methodology adopted by the authors of the surveyed papers. Our findings show that a significant number of authors did not provide information of the simulation tools used or, even when they did, there was not enough information about the CI or SE of simulation results presented in the surveyed papers. Thus, there is no significant change with respect to quality and credibility of the simulation studies revised and the deep crisis of credibility still remains. The research design most authors prefer is a hybrid one where both simulation and analytic methods are being used for network performance analysis. Finally, we provide guidelines for the best practice of using simulation tools for the performance evaluation of telecommunication networks. [ABSTRACT FROM PUBLISHER]

The papers in this special section focus on modeling and simulation in disaster and emergency management. The COVID-19 pandemic of 2020 has wrought damage globally to a degree that is totally unprecedented in human history.Within three months that the first known death from the illness caused by the so-called novel Coronavirus was reported by state media in China on the 11th of January 2020, close to 1.8 million people worldwide had tested positive, with more than 100,000 deaths reported. By the time the pandemic will have been declared to be under control, millions more are expected to have been infected and tens (possibly hundreds) of thousands more will have perished as a result of the disease. Not only are the numbers of COVID-19 infected people and deaths staggering. Economies throughout the world have suffered tremendously, with many companies forced to shut down, or at the very least significantly scale down, their production of goods and services as a result of the need for social distancing and self-isolation required to prevent the unmitigated transmission of the disease. All this has led to hundreds of millions worldwide losing their employment or other sources of livelihood. Governments of all nations, large and small, developed and underdeveloped, have needed to pump into their economy and onto their struggling citizens whatever financial resources they could manage to generate. [ABSTRACT FROM AUTHOR]

The first part of this paper presented mymargin the device-level comparison of emerging materials (In0.53Ga0.47As and 2-D materials) and device architecture (NW FETs) with s-Si FinFETs. In order to further understand the performance and energy efficiency of these device options for future technology nodes, it is required to go beyond the device-level comparison by accounting for not only intrinsic but also the extrinsic parasitic elements. In this paper, we present the comparison of s-Si, In0.53Ga0.47As, and 2-D material-based n-type MOSFETs using the circuit-level figure of merits across three successive future technology nodes. The analysis incorporates both device characteristics obtained from an advanced quantum mechanical simulation tool and circuit-level comparison, which accounts for device parasitic elements and wiring load. The results show that 2-D material DG MOSFETs present a more energy-efficient device option than s-Si and In0.53Ga0.47As FinFETs in sub-0.7-V supply voltage regime and In0.53Ga0.47As nanowire (NW) FETs can outperform s-Si multi-gate (MuG) FETs and 2-D material FETs, but when considering non-idealities, s-Si NW FETs remain both faster and more energy-efficient device option. [ABSTRACT FROM AUTHOR]

The impedance expansion method (IEM), which has been previously proposed by the authors of this paper, is a circuit modeling technique for electrically very small devices. This paper describes a circuit modeling procedure that utilizes the IEM and eigenmode analysis for a wireless power transfer system. First, a multimode circuit model that can represent the higher order resonances in a broadband frequency range is presented. Subsequently, a single-mode circuit model—consisting only of passive elements—that can represent both the radiated and conduction loss powers at approximately its operating frequency band is presented. [ABSTRACT FROM AUTHOR]

Cross-laminated timber (CLT) buildings are constructed by connecting CLT panels with dowel-type fasteners and mechanical anchors, which govern the lateral behavior of these structures. Although these connections are mostly distributed along the perimeter of the CLT panels, creating highly redundant structures, previous research on the lateral behavior of CLT structures has mainly focused on the behavior of the connections placed at the base of the CLT shear walls, such as hold downs and angle brackets, while limited attention has been paid to the connections between perpendicular walls and their effect on the lateral response of CLT shear walls. This paper presents a comprehensive experimental study aimed at investigating the effects of the interaction between perpendicular walls on the lateral response of CLT shear walls. CLT shear walls with three different aspect ratios were analyzed by means of monotonic and cyclic tests, both in single wall configuration and connected to perpendicular walls. The experimental findings demonstrate that the structural interaction due to the perpendicular walls significantly affects the lateral response of a CLT shear wall, resulting in increased lateral stiffness, lateral capacity, and deformation capacity. In addition, the study presents two analytical models for the prediction of the lateral stiffness and the lateral capacity of CLT shear walls connected to perpendicular walls. The analytical models were validated based on the experimental results, showing reasonable agreement. [ABSTRACT FROM AUTHOR]

Enhancing power electronics (PE) converter reliability is crucial for ensuring a reliable operation of current and future operating Wind Turbines (WTs). Achieving high reliability of variable speed WT PE systems requires careful consideration of their operation, and particularly their thermal cycling. This paper presents a methodology for evaluating and reconsidering operational strategies of WTs with relation to the thermal loading and lifetime consumption of the converter. The methodology is applied to compare control strategies for the WT generator and evaluate their impact on the converter reliability by observation of the thermal cycles and by calculating the resultant lifetime consumption of those stress cycles. The thermal stress on both the Machine Side Converter (MSC) and the Grid Side Converter (GSC) is examined and compared. It is shown that the least reliable of the three evaluated control strategies is the one that tracks the power curve below rated speed most closely. This paper suggests that dynamic transients associated with the WT control largely influence the IGBT module wear-out and their modelling needs to be prioritized for lifetime studies. These dynamic transients are captured by the improved model whose value is confirmed for the comparisons in the case study of the paper. [ABSTRACT FROM AUTHOR]

This paper analytically examines how the condition of weak grid connection affects the torsional sub-synchronous oscillations (SSOs) induced by a grid-connected DFIG in a power system. The examination focuses on the SSO mode of grid-connected DFIG, which is dominated by the phase locked loop (PLL) or DC voltage control. Theoretical analysis is carried out to prove that the condition of weak grid connection amplifies the impact of modal resonance between the DFIG and torsional dynamics of synchronous generators. The amplifying effect of weak grid connection exhibits as the decrease of damping of SSO mode of DFIG and increase of the associated residue when the grid connection weakens. Consequently, the DFIG is more likely to induce torsional SSOs under the condition of weak grid connection, leading to system instability in the worst case. Analytical examination presented in the paper reveals the mechanism about how the condition of weak grid connection plays a key role for the DFIG to induce the torsional SSOs. An example multi-machine power system with the grid-connected DFIG is presented. Results of modal analysis and non-linear simulation using detailed model of DFIG validate the analysis and conclusions made in the paper. [ABSTRACT FROM AUTHOR]

This paper proposes an approach to determine the participation of algebraic variables in power system modes. The approach is based on a new interpretation of the classical participation factors, as well as on the definition of adequate output variables of the system's state-space representation. The paper considers both the linear and generalized eigenvalue problems for the calculation of the participation factors and presents a theorem to cope with eigenvalue multiplicities. An illustrative example on the two-area system, as well as a study on a 1479-bus dynamic model of the all-Irish transmission system are carried out to support the theory and illustrate the features of the proposed approach. [ABSTRACT FROM AUTHOR]

Background: The accurate prediction of where faults are likely to occur in code can help direct test effort, reduce costs, and improve the quality of software. Objective: We investigate how the context of models, the independent variables used, and the modeling techniques applied influence the performance of fault prediction models. Method: We used a systematic literature review to identify 208 fault prediction studies published from January 2000 to December 2010. We synthesize the quantitative and qualitative results of 36 studies which report sufficient contextual and methodological information according to the criteria we develop and apply. Results: The models that perform well tend to be based on simple modeling techniques such as Naive Bayes or Logistic Regression. Combinations of independent variables have been used by models that perform well. Feature selection has been applied to these combinations when models are performing particularly well. Conclusion: The methodology used to build models seems to be influential to predictive performance. Although there are a set of fault prediction studies in which confidence is possible, more studies are needed that use a reliable methodology and which report their context, methodology, and performance comprehensively. [ABSTRACT FROM AUTHOR]

This paper investigates the mechanics behavior of eccentric rectangular hollow section (ERHS) X-joints subjected to axial compression in the brace, based on which analytical formulas are established to predict the strength of the ERHS X-joints. Static testing is conducted on two ERHS X-joint and one RHS X-joint specimens under brace compression, and the corresponding finite element (FE) analysis is performed. It is found that the ultimate strength of the ERHS X-joints with a medium brace/chord width ratio (β) is 39% higher than that of the RHS X-joints. The strength and initial stiffness of the ERHS X-joints increase when β increases. Based on the load transferring mechanism, two analytical models and the corresponding equations are proposed to predict the strength of the ERHS X-joints with β≤0.925 and β=1.0. The proposed models are validated through experimental data and FE results. [ABSTRACT FROM AUTHOR]

As the inverter-based generation replaces the conventional synchronous generators, it may also need to fill in the missing ancillary service support. One of these ancillary services is dynamic reactive power provision and voltage control. This paper analyzes optimal strategy of reactive and active fault-current support of the inverter-based generation leading to fast voltage recovery of the system. For the purpose of the analysis, new ramping active current controller able to emulate different behavior of active current injection is proposed. By optimizing its parameters for different case studies of the system, the conclusions about optimal behavior of the inverter based generation with respect to system parameters and operating conditions are drawn. It is observed that the optimal combination of active and reactive fault-current is the most sensitive to the dynamic load component penetration levels in the system. With the increasing penetration levels, the significance of active fault-current injection increases. The results show that with higher penetration levels of dynamic load component in the heavy load areas, the ramping down of the inverter-based generation active fault-current results in slower voltage recovery of the system. Following this conclusion, a recommendation on update of current European grid codes is proposed. [ABSTRACT FROM AUTHOR]

This paper addresses the frequency oscillation problem in a parallel-inverter-based grid-connected system. Angular frequency interactions between inverters and the grid exhibit various numbers of complicated characteristics that seriously threaten the connected power system's stable operation. This paper proposes a unified frequency oscillation method analysis to investigate the oscillation problem in a multi-VSG grid-connected system. In this method, the power control model of each grid-connected inverter is equivalent to a two-terminal network by analogy method, which can be described as a “current source” connected in parallel with a reciprocal of “admittance” and then joined in series with a joint of “admittance.” Next, considering the influence of grid impedance, the model of the whole grid-connected system is established to reveal the mechanism of multi-VSG angular frequency oscillation. Subsequently, the influence factors of frequency oscillation and its variation law are analyzed through transfer functions, which provide an essential theoretical method for solving the frequency oscillation problem in the current multi-inverter grid-connected engineering application. Finally, we validate the effectiveness and correctness of the small-signal model and the frequency oscillation characteristics by building the MATLAB/Simulink simulation. [ABSTRACT FROM AUTHOR]

The Cox proportional hazards model is a popular semi-parametric model for survival analysis. In this paper, we aim at developing a federated algorithm for the Cox proportional hazards model over vertically partitioned data (i.e., data from the same patient are stored at different institutions). We propose a novel algorithm, namely VERTICOX, to obtain the global model parameters in a distributed fashion based on the Alternating Direction Method of Multipliers (ADMM) framework. The proposed model computes intermediary statistics and exchanges them to calculate the global model without collecting individual patient-level data. We demonstrate that our algorithm achieves equivalent accuracy for the estimation of model parameters and statistics to that of its centralized realization. The proposed algorithm converges linearly under the ADMM framework. Its computational complexity and communication costs are polynomially and linearly associated with the number of subjects, respectively. Experimental results show that VERTICOX can achieve accurate model parameter estimation to support federated survival analysis over vertically distributed data by saving bandwidth and avoiding exchange of information about individual patients. The source code for VERTICOX is available at: https://github.com/daiwenrui/VERTICOX. [ABSTRACT FROM AUTHOR]

An increasing need for fast and reliable models has led to a continuous development of Fourier-based (FB) analytical modeling. This paper presents an overview of the techniques that are currently available in FB modeling for electric machines. By coupling that overview to the most relevant literature related to the subject, an interesting starting point is provided for anyone who wants to use or improve FB models. The following seven aspects of FB models are discussed in detail: 1) the magnetic potential (scalar or vector potential); 2) the coordinate system and the solution of the partial-differential equations for each magnetic potential and for each coordinate system; 3) the way in which time dependence is accounted for; 4) the implementation of the source terms; 5) the possibilities to account for slotted structures; 6) the modeling of eccentricity; and 7) the post-processing computation of physical quantities, such as flux density, electromotive force, torque, losses, and eddy currents in conductive objects. Furthermore, this paper gives the closed form solution of the Laplace, Poisson, and Helmholtz equations in each coordinate system. In addition, this paper tackles other important features of FB models such as computational time reduction and coupling the machine model to an electric circuit. [ABSTRACT FROM AUTHOR]

In this paper, an analytical model has been developed to observe the recombination losses involved in a tunnel oxide passivated contact solar cell with a carrier-selective layer constituting polycrystalline silicon (poly-Si). The main focus of this paper is to observe the contribution of each component of recombination current density and its effect on open-circuit voltage, Voc. The effect of emitter saturation current density (Joe), surface recombination velocity, substrate thickness, and doping density of carrier-selective layer on Voc has been presented. The analysis indicates that Voc = 766 mV can be achieved for Joe = 2 fA/cm2, and a doping density of poly-Si > 1021cm−3 in a c-Si/SiO2/poly-Si contact for a 50- $\mu \text{m}$ -thick substrate in case of ideal surface passivation. For identical conditions, Voc attains a lower value of 750mV for a 180- $\mu \text{m}$ -thick substrate. The dependence of Voc on bandgap of tunnel layers has also been observed by considering other materials like Si3N4 and SiC. These results from the analyticalmodel have been compared with results froma simulation using automat FOR simulation of HETerostructures v2.5 and have been found to be in good agreement with each other. [ABSTRACT FROM AUTHOR]

To research the impact of temperature-dependent characteristics of windings and magnets on the electromagnetic power loss and thermal properties of high-speed (HS) interior permanent magnet synchronous machines (PMSMs), an electromagnetic-thermal bi-directional coupling method (BDCM) is proposed for water-cooled HS PMSMs considering the assembling gaps between the motor components in this paper. The electromagnetic power loss is calculated by 3-D transient finite-element method and loaded into the 3-D temperature field according to the actual loss distribution, and the materials’ properties are in turn updated according to the temperature distributions. The loss and temperature calculation results of a 15kW HS amorphous metal PMSM are calculated by two different coupling methods in the conditions of the rated-load sinusoidal supply and converter supply, and compared with the measured results in the case of converter supply. The results obtained by the BDCM are more consistent with the experiment results, verifying the superiority of the proposed analyzing method in improving the calculation accuracy of motor loss and temperature rise. In addition, the applicable conditions of the proposed method are also summarized in the paper. [ABSTRACT FROM AUTHOR]

This report analyzes the reproducibility of the article “Computing Planetary Interior Normal Modes with A Highly Parallel Polynomial Filtering Eigensolver” by Jia Shi et al. (Shi, 2018). To reproduce the results we perform different weak and strong scaling studies using a series of Mars models. All experimental runs were performed during the SC19 Student Cluster Competition on a four node Intel Skylake cluster. We show that the findings of the original article can be reproduced in a different environment. [ABSTRACT FROM AUTHOR]

A group of geographically dispersed and logically collaborated emergency organizations are involved when emergency occurs. Two challenging issues are a reasonable emergency resource allocation mechanism and an efficient resource conflict checking and resolution control mechanism to ensure the conflict-free execution of global cross-organization emergency response processes. To address them, this paper proposes an approach to support emergency resource management including both intraorganization private resource management and cross-organization public resource management. The former has been fully discussed in our previous work using E-net. To cope with the latter, this paper presents a novel type of Petri net that is extended with both time and resource factors to model cross-organization emergency response processes. Then, according to the resource requirement analysis, their worst, delayed, and best cases are obtained. Next, emergency resource conflict checking and four conflict resolution strategies are proposed to resolve the detected resource conflicts for the delayed execution case. This paper shows how to use different resolution strategies to construct the conflict-free model by designing corresponding resolution controllers. Finally, their performance is evaluated by a fire emergency response example. [ABSTRACT FROM AUTHOR]

Availability of a common, shared benchmark to provide repeatable, quantifiable, and comparable results is an added value for any scientific community. International consortia provide benchmarks in a wide range of domains, being normally used by industry, vendors, and researchers for evaluating their software products. In this regard, a benchmark of untimed Petri net models was developed to be used in a yearly software competition driven by the Petri net community. However, to the best of our knowledge there is not a similar benchmark to evaluate solution techniques for Petri nets with timing extensions. In this paper, we propose an evaluation framework for the comparative analysis of generalized stochastic Petri nets (GSPNs) simulation techniques. Although we focus on simulation techniques, our framework provides a baseline for a comparative analysis of different GSPN solvers (e.g., simulators, numerical solvers, or other techniques). The evaluation framework encompasses a set of 50 GSPN models including test cases and case studies from the literature, and a set of evaluation guidelines for the comparative analysis. In order to show the applicability of the proposed framework, we carry out a comparative analysis of steady-state simulators implemented in three academic software tools, namely, GreatSPN, PeabraiN, and TimeNET. The results allow us to validate the trustfulness of these academic software tools, as well as to point out potential problems and algorithmic optimization opportunities. [ABSTRACT FROM AUTHOR]

This paper proposes a resonant switching cell model to analyze and design the single-ended resonant dc–dc converters. The single-ended zero-voltage switching (ZVS) converters such as the Class E converter are efficient for megahertz switching because they feature low turn-on and turn-off switching losses. Also, they use only a ground-referenced switch, allowing a simple gate drive circuit. In this paper, we investigate the single-ended resonant converter with the small input inductance, whereas the conventional Class E converter has a large input inductance. The main contribution of this paper is to propose the resonant switching cell as an analytic model that simplifies the analysis and the design of the resonant dc–dc converters. Furthermore, this paper presents the design method of the resonant switching cell model for minimizing the resonant current magnitude and conduction loss while the converter maintains ZVS property. The experimental results from a 10-MHz GaN-based prototype demonstrate the feasibility and effectiveness of the analysis and design based on the proposed resonant switching cell model. [ABSTRACT FROM AUTHOR]

The paper considers the problem of sub-synchronous resonances (SSR) in doubly fed induction generators connected to the grid through series-compensated lines. The existence of oscillations is observed on a laboratory test-bed in various conditions, with instabilities developing in the worst-case scenario. Despite the limitations of a small-scale test-bed, the ability to investigate problems and solutions in ways that would not be possible on a full-scale system is very valuable. In particular, the paper demonstrates the significant effect of the choice of dq reference frame on the severity of SSR. Stator-aligned algorithms are found to be significantly more resonant than grid-oriented algorithms, as evidenced in experiments as well as using an analysis method proposed in the paper. From this observation, an algorithm is proposed to emulate a grid-alignment using stator voltages and currents, but without measurements of the grid and series-capacitor voltages. Two control laws are then presented to regulate the active and reactive powers generated, resulting in well-damped transient responses. SSR oscillations are found to be eliminated in experime, as well as simulations of a full-scale system and using a frequency response analysis of the closed-loop system. The effectiveness of the proposed control schemes is verified through experiments for different compensation levels and varying speeds. Within the assumptions made in the design, the proposed controllers are global. [ABSTRACT FROM AUTHOR]

High-quality generator dynamic models are critical to reliable and accurate power systems studies and planning. With the availability of PMUs, measurement-based approach for model validation has gained significant prominence. In this approach, the quality of a model is analyzed by visually comparing measured generator response with the model-based simulated response for large system disturbances. This paper proposes a new set of performance metrics to assess the model validation results to facilitate automation of the model validation process. In the proposed methodology, first, the slow governor response and comparatively faster oscillatory response are separated, and then a separate set of performance metrics is calculated for each of these two components. These proposed metrics quantify the mismatch between the actual and model-based response in a comprehensive manner without missing any information enabling automation of the process. Furthermore, in this paper, we are also proposing that the sensitivity analysis for model calibration be performed with respect to the proposed metrics for the systematic identification of key parameters. Results obtained using both simulated and real-world case-studies validate the effectiveness of the proposed performance metrics for model validation and their application to the sensitivity analysis for model calibration. [ABSTRACT FROM AUTHOR]

This paper proposes a way to represent the anisotropic nonlinear superconducting properties using a discrete model for magnetization with the corresponding critical parameters, equivalent to the Power Law model for currents. This simplified model makes it possible to analyze magnetic systems with superconducting elements in a stationary mode, which reduces the calculation time. Using of proposed model is demonstrated by the calculation of force interactions between high-temperature superconducting (HTS) samples and permanent magnet in zero-field-cooling (ZFC) and field-cooling (FC) modes. HTS bulks in the form of a prism and stack made of HTS tape are considered. The calculation of the electromagnetic field was carried out using the method of integral equations for field sources. The data of calculations are compared with the results of experimental studies. [ABSTRACT FROM AUTHOR]

Millimeter-wave rotary-wing (RW) unmanned aerial vehicle (UAV) air-to-ground (A2G) links face unpredictable Doppler effect arising from the inevitable wobbling of RW UAV. Moreover, the time-varying channel characteristics during transmission lead to inaccurate channel estimation, which in turn results in the deteriorated bit error probability performance of the UAV A2G link. This paper studies the impact of mechanical wobbling on the Doppler effect of the millimeter-wave wireless channel between a hovering RW UAV and a ground node. Our contributions of this paper lie in: i) modeling the wobbling process of a hovering RW UAV; ii) developing an analytical model to derive the temporal autocorrelation function (ACF) for the millimeter-wave RW UAV A2G link in a closed-form expression; and iii) investigating how RW UAV wobbling impacts the Doppler effect on the millimeter-wave RW UAV A2G link. Numerical results show that different RW UAV wobbling patterns impact the amplitude and the frequency of ACF oscillation in the millimeter-wave RW UAV A2G link. For UAV wobbling, the temporal ACF decreases quickly and the impact of the Doppler effect is significant on the millimeter-wave A2G link. [ABSTRACT FROM AUTHOR]

In this paper, the boundary discretization method is used to improve the traditional subdomain model. The improved model can be used to calculate the magnetic field distribution in the region containing non-orthogonal boundary, avoiding the influence of the simplified stator slot or permanent magnet shape on the results in calculating the motor magnetic field using the traditional subdomain model. In addition, the improved subdomain model can also be used to calculate the air-gap flux density when the rotor is eccentric, instead of segmenting the air-gap to an equivalent state without eccentricity. The calculation object of this paper is a surface-mount permanent magnet motor with a rectangular stator slot. The air-gap flux density under no-load and load conditions is calculated, respectively. Since the improved subdomain model does not need to simplify the stator slot shape, the magnetic potential in the stator slot is also calculated. Finally, the air-gap flux density under rotor eccentricity is calculated, and the influence of the calculating parameters on the results of the improved subdomain model is discussed. All the calculated results are compared with those obtained by the finite element method, which verifies the accuracy of the improved calculation model. [ABSTRACT FROM AUTHOR]

The term “business incubator” (BI) has become an accepted neologism among academics, practitioners, and policymakers. This is despite the lack of an agreed definition amongst scholars of what exactly constitutes a BI. Using a systematic literature review methodology, we identify and analyze definitions of BIs used in published academic research papers and practice papers over a 35-year period. In this article, we undertake a thematic analysis, using the software package NVivo, of 82 academic and 14 practice definitions used in 61 publications. Our analysis shows that definitions of BIs are constructed around three core themes: the business incubation model; the purpose of the incubator; and the target of support provided by the incubator. By identifying both consistencies and inconsistencies in existing definitions, we provide a more nuanced understanding of the heterogeneity that underlies the organizational form referred to as a BI. We conclude by proposing an agenda for further research. [ABSTRACT FROM AUTHOR]

In negative capacitance field-effect transistors (NCFETs), drain current may decrease with increasing ${V}_{\mathrm {ds}}$ in the saturation region, leading to negative differential resistance (NDR). While NDR is useful for oscillator design, it is undesirable for most analog circuits. On the other hand, the tendency toward NDR may be used to reduce the normally positive output conductance ( ${g}_{ \mathrm {ds}}$ ) of a short-channel transistor to a nearly zero positive value to achieve higher voltage gain. In this paper, we analyze the NDR effect for NCFET in the static limit and demonstrate that it can be engineered to reduce ${g}_{\mathrm {ds}}$ degradation in short-channel devices. Small and positive $g_{\mathrm{ ds}}$ is achieved without compromising the subthreshold gain, which is crucial for analog applications. The 7-nm ITRS 2.0 FinFET with 0.7 V ${V}_{\mathrm {dd}}$ is used as the baseline device in this paper. [ABSTRACT FROM AUTHOR]

This paper investigates systemwide short-term voltage stability concerns of power systems due to the multiple parametric uncertainties in the dynamic load model. The impact of regional load model uncertainty can be widespread and may mislead the whole system analysis and subsequent measures, if not properly addressed. This research discloses that the systemwide impact is related to the voltage weak areas through voltage stability modal analysis, and suggests that the impact of uncertain parameters needs to be assessed from a systems perspective, which has rarely been done in the existing practices. We thus present a three-step methodology for evaluating the systemwide uncertainty impacts: Firstly, it screens possible trajectories of all buses. The second step verifies whether the screened trajectories comply with the defined criteria, and determines the necessity of the final step. The final detailed analysis is conducted for those selected scenarios. Comprehensive studies for both the IEEE test and real Korea power systems consistently confirm the observations and demonstrate the efficacy and validity of the proposed method. [ABSTRACT FROM AUTHOR]

The mining method that is still often used in salt deposits is the room-and-pillar mining method, in which the dimensioning of the most requested element in the system is followed. The pillars are the elements subjected to the greatest loads. Knowing the size and distribution mode of the secondary state of stress—deformation—is a necessity that can lead to the design and realization of stable, reliable underground excavations. This paper proposes an analytical assessment model of the secondary stress state in the pillars between the operating rooms, as well as in the whole system room–pillar–floor, based on the results obtained from laboratory research through modeling and in situ research. For this purpose, the evaluation of the secondary stress state was carried out considering the following methods: (1) the dimensioning method based on the theory of limit equilibrium, taking into account the effective stress in the pillars; and (2) the mechanics of the continuous environment based on the design of some analytical models for evaluating the secondary stress-deformation state in the pillar and floor. The exploitation of one of the largest salt deposits in Romania is used as a case study, and the stability of the exploitation system with rooms and pillars is evaluated by analytical methods. The secondary state of tension was calculated at different points on the height of the pillar. Through the proposed algorithm, the value of the axial component of the secondary stress state at different points along the axis of a pillar located at a depth of 100 m varies between 1.498 and 1.657 MPa, compared to the value obtained by the finite element method and in situ measurements, which was 1.64 MPa. The comparison revealed a high degree of agreement between the results obtained for the depth of 100 m using both the FEM and laboratory and in situ measurements. This suggests that the proposed algorithm is a reliable method for predicting the secondary stress state. The presented algorithm can be extended in the field of mining deposits, where mining methods with rooms and pillars are used. [ABSTRACT FROM AUTHOR]

This paper proposes a linear regression model for scalar-valued responses and two-way functional (bivariate) predictors. Our motivation stems from the quality evaluation of products based on optical emission spectroscopy data from virtual metrology of semiconductor manufacturing. We focus on multivariate cases where the smoothness and shapes of the data vary significantly across variables. We propose a two-step solution to this problem, consisting of decomposition and prediction. First, we decompose the two-way functional data into pairs of component functions using functional singular value decomposition. Next, we build functional linear models for the decomposed functional variables and obtain the final predictor by averaging the models. Results from numerical studies, including simulation studies and real data analysis, demonstrate the promising empirical properties of the proposed approach, especially when the number of predictors is large. [ABSTRACT FROM AUTHOR]

Network data in real-world tends to be error-prone due to incomplete sampling, imperfect measurements, etc.; this in turn results in inaccurate results when performing network analysis or modeling, such as node classification and link prediction, on these flawed networks. In this paper, we aim to reconstruct a reliable network from a flawed, undirected, unweighted network, a process referred to network enhancement. More specifically, network enhancement aims to detect the noisy links that are observed in the network but should not exist in the real world, as well as to predict the missing links that do indeed exist in the real world yet remain unobserved. While some attempts have been made to detect either noisy links or missing links, few of these works have considered unifying these two tasks, even though they are inter-dependent and capable of mutually boosting each others’ performance. In this paper, we therefore propose E-Net, an end-to-end graph neural network model, to leverage the mutual influence of these two tasks in order to achieve both goals more effectively. On one hand, detecting noisy links can benefit the performance of missing link prediction, while on the other hand, predicting missing links can provide indirect supervision for detecting noisy link detection when the labels of these noisy links are unavailable. Moreover, by proposing a subgraph extraction mechanism based on random walk with restart, the model can be scaled up to large networks and is able to preserve the local and global structural characteristics. The experimental results on several types of large networks demonstrate that the proposed model obtains an improvement of 10.7 percent on average in terms of F1 for predicting missing links, along with an average of 3.7 percent improvement in terms of precision for detecting noisy links compared with the state-of-the-art baselines. [ABSTRACT FROM AUTHOR]

Modern Medical Information Systems very often comprise Medical Devices and governed by regulations which require stringent Risk Management activities to be implemented to minimize the occurrence of safety risks. Currently, the reference standard adopted by manufacturers for Risk Management is ISO 14971, which, however, was devised for traditional (mostly hardware) Medical Devices and does not either take into account the peculiarities of modern Medical Information Systems, or define a formal methodology to conduct Risk Assessment. Moreover, the approaches currently implemented by manufacturers typically aims at obtaining qualitative Risk Assessment results. Within the so-delineated application scenario, this paper proposes a methodology for the Dynamic Probabilistic Risk Assessment of Medical Information Systems, by specifically looking at medical devices that are intended as one of the most relevant components in such systems. The methodology complies with ISO 14971 and improves current practices because it allows the analyst to conduct a quantitative analysis, also taking into account the temporal dimension. It relies on a Probabilistic Risk Model, defined as a set of Markov Models, which is model-checked to obtain quantitative information about the risks. The proposed methodology is also adopted to improve definitively the Medical Device post-market surveillance, which is currently implemented as a ”wait for an incident” activity. In other words, currently a manufacturer sets up a service that has to ”react” to an incident by starting an investigation activity. Instead, the methodology proposes the adoption of risk models defined during the development phase also to re-assess periodically the risks related to the product during the post-market surveillance. This may prevent some incidents because risks are assessed using data collected in the field (no longer guesstimated as during the development phase) and taking into account the temporal effects on probability distributions (such as the deterioration of hardware/software components over the time). [ABSTRACT FROM AUTHOR]

A good quality stability model is a key factor for accurate power system operations.Inaccurate parameters of the stability models affect the decision making which paves the way for serious consequences. Thus, it is necessary to calibrate the stability model parameters in a regular manner. There are several calibration methods in the literature which are based on simultaneous estimation of the parameters and states. However, not all of the model parameters are well estimable simultaneously. Simultaneous estimation of parameters with high collinearity may result in biased calibration results. In this paper, the trajectory sensitivity method is used to detect the sensitive parameters and construct the sensitivity matrix. Then, parameters with high linear dependency are identified using the sensitivity matrix. It is shown that, despite the high sensitivity of a parameter, its estimability degrades as the collinearity with other parameters increase. In this paper an identifiability analysis that detects the collinearity among the sensitive parameters is proposed. The proposed method is validated using WSCC 9-Bus System. [ABSTRACT FROM AUTHOR]

The dataflow concept has been successfully used for modeling and synthesizing signal processing applications since decades, and recently, dataflow has also been discovered to match the computation model of machine learning applications, leading to extremely successful dataflow based application design frameworks. One of the most attractive features of dataflow, especially for signal processing, is related to its formal nature: when properly defined, a dataflow-based application model can be analytically verified for correctness at the stage of application design. This paper proposes VR-PRUNE, a novel dataflow model of computation that is aimed for design of high-performance signal processing software, together with runtime support that allows efficient application deployment to heterogeneous GPU-equipped platforms. Compared to prior work, VR-PRUNE features variable token rate processing, which enables designing adaptive signal processing applications, and implementing solutions that, e.g., allow trading-off between power consumption and filtering bandwidth at runtime. The paper presents the formal concepts of VR-PRUNE, as well as four application examples from domains related to signal processing, accompanied with quantitative results, which show that using VR-PRUNE enables, for example, application power-performance scaling, and on the other hand describing adaptive application behavior with 59% fewer dataflow graph components compared to previous work. [ABSTRACT FROM AUTHOR]

Featured Application: The present paper evaluates 10 alternative shoreline pond electrode station designs using frames in a linear arrangement of electrodes for HVDC interconnections, against the typical design, according to CIGRE B4.61/2017 (parallel arrangement of electrode frames, with respect to the longitudinal axis of the breakwater), studying it from the point of view of electric field analysis (with emphasis on the near-field). During the design of a shoreline electrode station for High-Voltage Direct Current (HVDC) interconnections, the location of the electrodes plays a critical part, especially in the development of the near-electric field. The basic structure is their linear placement, in the form of successive frames, parallel to the longitudinal axis of the breakwater, as proposed by CIGRE and implemented in existing projects. However, this arrangement requires a considerable breakwater length, which may not be permissible, as in the case of Stachtoroi, one of the two electrode stations being built for the 1 GW, ±500 kV HVDC interconnection between Crete and mainland Greece. This troubled the preliminary study team of the electrode stations, which investigated other possible configurations. In this paper, configurations of linear placements of electrode frames are studied and compared at the preliminary study level in terms of electric field effects (especially the near-field), using an analytical simplified model and the superposition method, to determine the most appropriate arrangement of electrodes that will cover the respective requirements of CIGRE directives B4.61/2017. These arrangements are practically evaluated for two different electrode station locations at Korakia in Crete and at Stachtoroi in Aegina for the Crete–mainland-Greece interconnection, resulting in interesting alternative solutions. [ABSTRACT FROM AUTHOR]

A growing body of scientific evidence indicates that exposure to low dose ionizing radiation (< 2 Gy) is associated with a higher risk of developing radioinduced cancer. Additionally, it has been shown to have significant impacts on both innate and adaptive immune responses. As a result, the evaluation of the low doses inevitably delivered outside the treatment fields (out-of-field dose) in photon radiotherapy is a topic that is regaining interest at a pivotal moment in radiotherapy. In this work, we proposed a scoping review in order to identify evidence of strengths and limitations of available analytical models for out-offield dose calculation in external photon beam radiotherapy for the purpose of implementation in clinical routine. Papers published between 1988 and 2022 proposing a novel analytical model that estimated at least one component of the out-of-field dose for photon external radiotherapy were included. Models focusing on electrons, protons and Monte-Carlo methods were excluded. The methodological quality and potential limitations of each model were analyzed to assess their generalizability. Twenty-one published papers were selected for analysis, of which 14 proposed multi-compartment models, demonstrating that research efforts are directed towards an increasingly detailed description of the underlying physical phenomena. Our synthesis revealed great inhomogeneities in practices, in particular in the acquisition of experimental data and the standardization of measurements, in the choice of metrics used for the evaluation of model performance and even in the definition of regions considered out-of-the-field, which makes quantitative comparisons impossible. We therefore propose to clarify some key concepts. The analytical methods do not seem to be easily suitable for massive use in clinical routine, due to the inevitable cumbersome nature of their implementation. Currently, there is no consensus on a mathematical formalism that comprehensively describes the out-of-field dose in external photon radiotherapy, partly due to the complex interactions between a large number of influencing factors. Out-of-field dose calculation models based on neural networks could be promising tools to overcome these limitations and thus favor a transfer to the clinic, but the lack of sufficiently large and heterogeneous data sets is the main obstacle. [ABSTRACT FROM AUTHOR]

A comprehensive study of dielectric modulated (DM) drift regions for power devices is presented in this paper. The performance of this structure is theoretically analyzed and compared with both conventional and superjunction (SJ) structures. In this paper, an analytical model for DM drift regions with cylindrical cells is proposed and compared with linear cells. An optimal tradeoff between breakdown voltage (BV) and specific ON-resistance ( R\scriptscriptstyle ON,sp) is obtained by a methodology developed in this paper. 3-D simulations of DM structures with hexagonal cells approximated by cylindrical cells are conducted to verify the analytical model. Optimal BV– R\scriptscriptstyle ON,sp tradeoffs for devices with conventional and SJ drift regions are also obtained through the same methodology and verified by 3-D simulations. Static characteristics of these three different drift region structures in both Si and SiC power devices are compared. [ABSTRACT FROM AUTHOR]

A fault tree (FT) defines an undesired top event, characterizing it using logic combinations of lower-level undesired events. In this paper, we focus on coherent FTs, i.e., the logic is restricted to AND/OR formulas. FT analysis is used to identify and assess the minimal cut sets (MCSs) of an FT, which define the minimal set of events leading to the undesired state. The dual of MCS is minimal path set (MPS). MCS and MPS are commonly used for qualitative evaluation of FTs in safety and reliability engineering. This paper explores computation of the MCS/MPS of an FT by means of structural analysis (namely, computation of minimal p -semiflows) of a Petri net (PN) that represents the FT. To this end, we propose a formal definition of a coherent FT and a transformation from this model to a PN subclass (namely, structurally persistent nets). We also prove the relationship between minimal p -semiflows and MCS/MPS in an FT. In addition, we propose an algorithm that uses linear programming techniques to compute the MCS/MPS in an FT. Finally, we put our findings into practice by qualitatively evaluating the FT of a pressure tank system. [ABSTRACT FROM PUBLISHER]

In this paper, we study the stabilization and finite-time stabilization of probabilistic Boolean control networks (PBCNs). A complete family of reachable sets is defined first, based on which, feedback stabilization conditions are obtained. Then a way to find all possible state feedback controllers are presented for the stabilization of PBCNs accordingly. Moreover, it has been stated that the approach in this paper can also be applied to finite-time stabilization via some changes in the construction of set sequence. Finally, an evolutionary networked game is given as an example to illustrate the efficiency of the obtained results. [ABSTRACT FROM AUTHOR]

Different spreading processes in multiplex networks may interact with each other and display intertwined effects. In this paper, we propose a theoretical framework called infection-probability-dependent interlayer interaction propagation processes in multiplex networks with an arbitrary number of layers, to more precisely depict the intertwined effects which bring challenges to the existing state-dependent interlayer interaction models. Specifically, the spreading rate of each node is regulated by the proposed spreading rate function (SRF) which depends on both the intrinsic dynamics in its layer and the infection probabilities of its counterparts. We propose an algorithm to obtain the spreading threshold of each layer of the proposed theoretical framework. We analyze the three-layer tuberculosis-awareness-flu model with the SRF of each node being the expectation of infection-probability-dependent spreading rate. This paper gives a thorough and detailed numerical investigation of the impact and interaction of system settings and the spreading threshold of each layer. We find that for tuberculosis spreading which is in competing relation with awareness and cooperation relation with flu, the epidemic threshold is a constant when other layers’ intrinsic spreading rates are small. The cooperation layer has dramatic influence on the constant while the competing layer has no effect on it. [ABSTRACT FROM AUTHOR]