910,032 results
Search Results
2. Recyclability of Paper‐Based Composites for Packaging Applications – The Role of Evaluation Methods.
- Author
-
Kochersperger, Summer and Schabel, Samuel
- Subjects
- *
WASTE recycling , *PAPER recycling , *EVALUATION methodology , *SUSTAINABLE development , *RECYCLED paper - Abstract
Composites are pivotal in Europe's evolving packaging sector, which is undergoing changes due to circular and bioeconomy initiatives, which prioritize eco‐friendly packaging. Despite paper's high recycling rates, dynamic markets challenge recycling and circularity. Innovative paper‐based composites demand flexible recyclability assessments, which impacts product development. Recyclability methods are evolving as they struggle to match the dynamic changes occurring in the packaging sector. This article outlines paper recycling and compares global lab recyclability evaluation methods. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
3. Optimizing CO2 Adsorption/Desorption via the Coupling of Imidazole and Carbon Nanotubes Paper for Spontaneous CO2 Uptake from Ambient Air and Solar‐Driven Release.
- Author
-
Li, Chujia, Cao, Xuebo, Liu, Guangchun, Huang, Lin, Chu, Mingming, Cheng, Ruobing, Wang, Aijun, and Xu, Zhen
- Subjects
- *
GREENHOUSE effect , *CARBON paper , *CARBON sequestration , *DENSITY functional theory , *CARBON nanotubes - Abstract
Direct air capture (DAC) is a sustainable technology to alleviate the greenhouse effect and a reliable pathway to acquire inexhaustible CO2 for the production of costly chemicals and energy products. Current DAC technologies with amine‐related sorbents rely on chemisorption, while they consume intensive energy for CO2 release and sorbent regeneration by heating. Developing new DAC processes with weak, reversible adsorption can substantially reduce the regeneration energies. Herein, the design of CO2 breathing paper (CBP) is demonstrated toward spontaneous CO2 extraction from ambient air and solar‐driven regeneration. The CBP is fabricated by coupling 2‐ethyl‐4‐methylimidazole to carbon nanotube paper on the basis of density functional theory calculations. At ambient conditions, CBP spontaneously captures atmospheric CO2 with a capacity of 0.14–1.75 mmol g–1 at 0–35 °C through non‐covalent electrostatic interaction. Upon exposure to sunlight, all adsorbed CO2 can be released and converted to concentrated gas for storage. Attractively, the efficiency of solar‐driven CO2 release is much higher than the traditional temperature‐swing method owing to the IR sensitivity of CO2. Besides the reversibility, the mild conditions also ensure the durability of CBP. These findings suggest that the CBP is a promising candidate for cost‐effective DAC. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
4. Characteristics and degradability of laser print waste paper fiber reinforced PLA resin matrix composite materials.
- Author
-
Zhang, Xiaolin, Chang, Xing, Xu, Long, Huang, Maocai, Zuo, Liyuan, Cao, Jing, Wu, Yali, Li, Xin, Yang, Menghao, Gao, Limin, and Bo, Xiangfeng
- Subjects
- *
WASTE paper , *LASER printing , *FIBER-reinforced ceramics , *COMPOSITE materials , *WOOD-pulp , *FIBROUS composites , *LACTIC acid , *RENEWABLE natural resources - Abstract
Highlights As is well known, Laser print paper is usually produced with high‐quality chemical wood pulp. The laser print waste paper fiber (LPWF) is a high‐quality secondary fiber, and the research and development of high‐value utilization technology for laser print waste paper has attracted much attention in the field of renewable resource recycling. In this study, LPWF was used to reinforce poly(lactic acid) (PLA) composites in the field, and the composites were modified with bioenzyme, cationic polyacrylamide (CPAM), and nano‐silicon carbide (Nano‐SiC) to enhance the interfacial compatibility of LPWF/PLA composites. The study systematically investigated the effects of various modification methods on the characteristics and degradability of composites made from laser print waste paper fiber reinforced PLA resin matrix. The results showed that the mechanical properties of the composites treated with CPAM and Nano‐SiC were significantly improved, with tensile strengths of 54.3 and 59.5 MPa, and flexural strengths of 85.1 and 91.5 MPa, respectively, and the water absorption of the composites was reduced after the modification treatment, while the thermal stability was improved. The degradation performance of the composites in various water environments indicated that the inclusion of LPWF accelerated the water degradation rate of the composites, with the maximum degradation rate of the composite reaching 1.26% in 30 days. Laser print waste paper is an excellent quality recyclable fiber resource. Four modifiers were used to modify LPWF/PLA composites. Characteristics and degradability of the composites were investigated. Significantly improved properties of CPAM and Nano‐SiC modified composites. The degradation rate of composites is increased by the addition of LPWF. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
5. Synthesis and characterization of cellulose nanofibers from waste paper and their utilization in wood adhesion.
- Author
-
Joshi, Garima and Chauhan, Shakti Singh
- Subjects
- *
WASTE paper , *WASTE recycling , *WOOD , *CELLULOSE synthase , *CHEMICAL processes , *NANOFIBERS - Abstract
Nanocellulose extraction from lignocellulosic materials is a highly chemical and energy‐intensive process as it requires the removal of lignin and hemicellulose. Writing paper is one of the processed materials that could be used as a raw material for the extraction of nanocellulose. In this work, cellulose nanofibers (CNFs) were synthesized from paper waste using TEMPO‐oxidation followed by high‐shear microfluidization. Scanning electron microscopy and atomic force microscopy confirmed the diameter of fibers in the nano‐range and a consistent zeta potential confirmed the stability of CNF suspension in water over a long time frame. Characterization of the CNFs using Fourier transform infrared spectroscopy indicated the presence of a carbonyl group due to the oxidation process. Thermogravimetric analysis and x‐ray diffraction revealed lower thermal stability and reduction in the crystallinity index of CNFs, as compared to pulp fibers. The obtained CNFs were used successfully as the sole binding agent in the preparation of fiberboards and also utilized as a reinforcing agent for polyvinyl acetate (PVAc) adhesive in the preparation of laminated veneer lumber (LVLs). The addition of CNFs in PVAc improved the glue shear strength indicating superior bonding characteristics and also increased the water resistance of the LVLs. Highlights: This work focused on cellulose nanofibers (CNFs) extraction from waste paperObtained CNFs form stable water suspension and have a diameter of less than 15 nmThermal stability and crystallinity index reduced after conversion to nanofibersCNFs form a complex network and act as a sole binder to make fiberboardsCNFs were utilized as a reinforcing agent for PVAc in preparation of LVLs [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
6. Utilizing de‐inked paper sludge for sustainable production of medium‐density fiberboard: A comprehensive study.
- Author
-
Ashori, Alireza, Mahmoudi Najafi, Seyed Heydar, Heydari, Vahid, Besharatifar, Kamran, Sharifi Taskouh, Hamed, and Maghsoodi, Davood
- Subjects
- *
SUSTAINABILITY , *PAPER mill waste , *FIBERBOARD , *CRYSTAL whiskers , *WASTE recycling , *ADHESION , *MOISTURE - Abstract
This study investigated converting abundant paper mill waste, de‐inked paper sludge (DPS), into value‐added medium‐density fiberboard (MDF) panels. The objective was to repurpose this solid waste into a valuable material that aligns with the principles of a circular economy. Previous research has examined the addition of paper sludge to wood composites, but there is limited information on the specific incorporation of DPS into MDF production. This investigation offers new insights into this application. MDF panels were manufactured using hardwood fibers, with varying levels of urea‐formaldehyde resin (10% and 12% by weight) and different loadings of DPS (ranging from 0% to 50% by weight). X‐ray diffraction analysis revealed the presence of defective DPS fiber crystals. Contact angle measurements confirmed that DPS had poor wettability, corresponding to increased water absorption. As more DPS was incorporated, the mechanical properties of the panels progressively weakened due to defective fibers and poor adhesion between the fibers and the matrix. This was evident in scanning electron microscopy micrographs, which showed an escalation in interfacial flaws. Increasing the resin dosage noticeably improved the internal bond strength and reduced moisture uptake across all levels of DPS. However, at a DPS loading of 50%, the properties of the panels deteriorated by 36%–57% compared to the control MDF. Additionally, thickness swelling and water absorption increased significantly with higher DPS content, primarily due to the hydrophilic nature of the fibers. Based on optimization, it was determined that a DPS loading of 20% with a resin content of 12% provided the best balance between performance, waste utilization, cost, and moisture resistance. The reuse of abundant paper sludge supports the goals of a circular economy. However, strategies are required to tailor the processing methods and enable higher levels of recycled material without excessively compromising the key attributes of the product. Further research should focus on enhancing the quality of DPS and its compatibility with wood fibers and resin to enhance the performance of the composite material. Highlights: DPS from recycled paper mill assessed for MDF production with wood fibers and resinIncreasing DPS loading caused reductions in strength and adhesion of panelsWater absorption and thickness swelling markedly rose with more DPS additionIt was attributed to hydrophilic fibers and disrupted fiber‐matrix bondingOptimal formulation was 20% DPS loading and 12% resin content, balancing performance, waste utilization, and cost. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
7. Advanced reliability and safety methodologies and novel applications (Selected papers of the international conference of QR2MSE2023)
- Author
-
Huang, Hong‐Zhong, Li, He, and Li, Yanfeng
- Subjects
- *
CONFERENCE papers , *RELIABILITY in engineering , *CONFERENCES & conventions , *ENGINEERING systems , *WIND turbine blades - Abstract
This document is an editorial from the journal "Quality & Reliability Engineering International" discussing advanced reliability and safety methodologies and their applications in modern engineering systems. The editorial highlights the need for innovative solutions in reliability and safety, and showcases original research presented at the 2023 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering. The research papers cover topics such as reliability modeling and analysis, reliability-based design and optimization, failure/safety analysis and prevention, and maintainability. The editorial expresses gratitude to the journal, editors, staff, reviewers, and authors for their contributions to the special issue. [Extracted from the article]
- Published
- 2024
- Full Text
- View/download PDF
8. Differential and Functional Response Time Item Analysis: An Application to Understanding Paper versus Digital Reading Processes.
- Author
-
Cho, Sun‐Joo, Goodwin, Amanda, Naveiras, Matthew, and Salas, Jorge
- Subjects
- *
ELECTRONIC paper , *REACTION time , *FALSE positive error , *CONDITIONED response , *SMOOTHNESS of functions , *READING comprehension - Abstract
Despite the growing interest in incorporating response time data into item response models, there has been a lack of research investigating how the effect of speed on the probability of a correct response varies across different groups (e.g., experimental conditions) for various items (i.e., differential response time item analysis). Furthermore, previous research has shown a complex relationship between response time and accuracy, necessitating a functional analysis to understand the patterns that manifest from this relationship. In this study, response time data are incorporated into an item response model for two purposes: (a) to examine how individuals' speed within an experimental condition affects their response accuracy on an item, and (b) to detect the differences in individuals' speed between conditions in the presence of within‐condition effects. For these two purposes, by‐variable smooth functions are employed to model differential and functional response time effects by experimental condition for each item. This model is illustrated using an empirical data set to describe the effect of individuals' speed on their reading comprehension ability in two experimental conditions of reading medium (paper vs. digital) by item. A simulation study showed that the recovery of parameters and by‐variable smooth functions of response time was satisfactory, and that the type I error rate and power of the test for the by‐variable smooth function of response time were acceptable in conditions similar to the empirical data set. In addition, the proposed method correctly identified the range of response time where between‐condition differences in the effect of response time on the probability of a correct response were accurate. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
9. Phosphate Esters: New Coating Materials for a Sustainable Release Paper.
- Author
-
Abenghal, Lahbib and Brouillette, François
- Subjects
- *
PHOSPHATE esters , *PAPER recycling , *SURFACE energy , *ADHESIVE tape , *SURFACE forces , *SURFACE coatings , *PHOSPHATES - Abstract
Paper manufacturers have long used silicone as the coating agent for release liners. However, silicone‐based release paper is very difficult to recycle due to covalent bonds between silicone and fibers. The most suitable solution to overcome this problem is to use alternative coating materials with adequate release properties, provided that they can be easily repulped in typical paper recycling facilities. We proposed a coating agent composed of phosphate esters and dimethylacetamide in order to manufacture a recyclable and efficient release paper. Analyses carried out on coated sheets showed that phosphate esters allowed the formation of a surface with adequate release properties (low peeling force and surface free energy). In addition, the residual adhesion values obtained with phosphate esters confirmed that they are well anchored on the backing paper surface, thus limiting the mass transfer to the adhesive tape. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
10. Oil blotting paper for formalin fixation increases endoscopic ultrasound‐guided tissue acquisition‐collected sample volumes on glass slides.
- Author
-
Yamai, Takuo, Ikezawa, Kenji, Seiki, Yusuke, Watsuji, Ko, Kawamoto, Yasuharu, Hirao, Takeru, Daiku, Kazuma, Maeda, Shingo, Urabe, Makiko, Kai, Yugo, Takada, Ryoji, Mukai, Kaori, Nakabori, Tasuku, Uehara, Hiroyuki, Tsuzaki, Sayoko, Ryu, Ayumi, Tanada, Satoshi, Nagata, Shigenori, and Ohkawa, Kazuyoshi
- Subjects
- *
FORMALDEHYDE , *FILTER paper , *PETROLEUM , *PANCREATIC cancer , *OIL filters - Abstract
Objectives: Endoscopic ultrasound‐guided tissue acquisition (EUS‐TA) is used for pathological diagnosis and obtaining samples for molecular testing, facilitating the initiation of targeted therapies in patients with pancreatic cancer. However, samples obtained via EUS‐TA are often insufficient, requiring more efforts to improve sampling adequacy for molecular testing. Therefore, this study investigated the use of oil blotting paper for formalin fixation of samples obtained via EUS‐TA. Methods: This prospective study enrolled 42 patients who underwent EUS‐TA for pancreatic cancer between September 2020 and February 2022 at the Osaka International Cancer Institute. After a portion of each sample obtained via EUS‐TA was separated for routine histological evaluation, the residual samples were divided into filter paper and oil blotting paper groups for analysis. Accordingly, filter paper and oil blotting paper were used for the formalin fixation process. The total tissue, nuclear, and cytoplasm areas of each sample were quantitatively evaluated using virtual slides, and the specimen volume and histological diagnosis of each sample were evaluated by an expert pathologist. Results: All cases were cytologically diagnosed as adenocarcinoma. The area ratios of the total tissue, nuclear, and cytoplasmic portions were significantly larger in the oil blotting paper group than in the filter paper group. The frequency of cases with large amount of tumor cells was significantly higher in the oil blotting paper group (33.3%) than in the filter paper group (11.9%) (p = 0.035). Conclusions: Oil blotting paper can increase the sample volume obtained via EUS‐TA on glass slides and improve sampling adequacy for molecular testing. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
11. Cold plasma‐induced N, Cu‐doping on carbon paper for high‐active catalytic electrode preparation.
- Author
-
Yue, Xufeng, Xiang, Hongyu, Zhang, Peng, Shu, Song, Zhao, Yingxin, Zhang, Jiacheng, Liu, Jinwei, and Yu, Deping
- Subjects
- *
CARBON paper , *LOW temperature plasmas , *ELECTRODES , *COLLISIONS (Nuclear physics) , *PHYSISORPTION , *CARBON nanofibers , *PHYSIOLOGICAL effects of cold temperatures - Abstract
Carbon paper is commonly used for catalytic electrode preparation because of its high conductivity, corrosion resistance, and stability. However, traditional electrode preparation methods are inappropriate for highly hydrophobic carbon paper. In this paper, a high‐activity carbon paper catalytic electrode was prepared using multistrategies cold plasma modification to create atomic structural defects, dope N and Cu elements, and introduce oxygen‐containing functional groups. Analyses show that the bombardment of high‐energy particles caused atomic structural defects. Nitrogen and copper entered the carbon paper through plasma‐induced chemical recombination and physical adsorption, reaching 5.26% and 3.83%, respectively. Ethanol‐based plasma introduced oxygen‐containing functional groups to improve hydrophilicity. Finally, the plasma‐prepared electrode exhibited a reduction efficiency of 87.69% in an electrocatalytic nitrate reduction reaction. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
12. Establishment of a measurement system to evaluate breast milk transfer of biological agents using dry filter paper: A multi‐institutional study.
- Author
-
Saito, Jumpei, Yakuwa, Naho, Hosokawa, Yoshihiko, Hamada, Hiromi, Suzuki, Tomo, Sago, Haruhiko, Kaneko, Kayoko, Yamatani, Akimasa, and Murashima, Atsuko
- Subjects
- *
BREAST milk , *FILTER paper , *BREAST milk collection & preservation , *DRYING agents , *BREASTFEEDING , *ENZYME-linked immunosorbent assay , *GOLIMUMAB , *ABATACEPT - Abstract
Aims: Information on breastfeeding and safety of biologics in infants is lacking due to difficulties in case collection. We evaluated methods for determining the concentration of biologics in breast milk using a dry filter method that can simplify the collection, storage and transport of breast milk. Methods: To generate dried filter paper (DFP) samples, approximately 30 μL of breast milk was placed onto a Whatman 903 card and punched out. After extraction, the supernatant was measured using an enzyme‐linked immunosorbent assay. Three concentrations of each drug were prepared in liquid breast milk (LBM) and DFP samples to determine their stability up to 28 days after storage at 2–8°C or −20°C for LBM and 25 ± 5°C for DFP. LBM and DFP samples were also provided by nursing mothers using biologics during lactation, and drug concentrations in both samples were compared. The agreement between the two measurement methods was confirmed by Bland–Altman analysis. Results: Breast milk was provided by 12 mothers who used biologics (tocilizumab, abatacept, etanercept, golimumab, sarilumab and belimumab). The coefficients of variation for within‐run and between‐run precision for the six drugs were within 15% for both LBM and DFP, and accuracy was within 90%–110% of the quality controls. After 28 days, concentrations remained at more than 90%. The difference between the values obtained by each method was within the acceptable range of error (−12.1 to +16.6 ng/mL). Conclusions: A method for determining the concentration of biologics using DFP is expected to help improve pharmacotherapy for lactating women. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
13. Streptomyces spp. as biocatalyst sources in pulp and paper and textile industries: Biodegradation, bioconversion and valorization of waste.
- Author
-
Cuebas‐Irizarry, Mara F. and Grunden, Amy M.
- Subjects
- *
PAPER industry , *COLOR removal in industrial waste purification , *BIOCONVERSION , *STREPTOMYCES , *ENZYMES , *WASTE paper , *COLOR removal (Sewage purification) - Abstract
Complex polymers represent a challenge for remediating environmental pollution and an opportunity for microbial‐catalysed conversion to generate valorized chemicals. Members of the genus Streptomyces are of interest because of their potential use in biotechnological applications. Their versatility makes them excellent sources of biocatalysts for environmentally responsible bioconversion, as they have a broad substrate range and are active over a wide range of pH and temperature. Most Streptomyces studies have focused on the isolation of strains, recombinant work and enzyme characterization for evaluating their potential for biotechnological application. This review discusses reports of Streptomyces‐based technologies for use in the textile and pulp‐milling industry and describes the challenges and recent advances aimed at achieving better biodegradation methods featuring these microbial catalysts. The principal points to be discussed are (1) Streptomyces' enzymes for use in dye decolorization and lignocellulosic biodegradation, (2) biotechnological processes for textile and pulp and paper waste treatment and (3) challenges and advances for textile and pulp and paper effluent treatment. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
14. Assessment of the Aryl Hydrocarbon Receptor–Mediated Effects of Aromatic Sensitizers in Paper Recycling Effluent Employing Zebrafish Embryos and in Silico Docking.
- Author
-
Takeda, Kazuki, Sarata, Aoi, Terasaki, Masanori, Kubota, Akira, Shimizu, Keita, and Kamata, Ryo
- Subjects
- *
ARYL hydrocarbon receptors , *MOLECULAR docking , *RECYCLED paper , *CHEMICAL reactions , *BENZYL ethers - Abstract
Aromatic sensitizers and related substances (SRCs), which are crucial in the paper industry for facilitating color‐forming and color‐developing chemical reactions, inadvertently contaminate effluents during paper recycling. Owing to their structural resemblance to endocrine‐disrupting aromatic organic compounds, concerns have arisen about potential adverse effects on aquatic organisms. We focused on SRC effects via the aryl hydrocarbon receptor (AHR), employing molecular docking simulations and zebrafish (
Danio rerio ) embryo exposure assessments. Molecular docking revealed heightened binding affinities between certain SRCs in the paper recycling effluents and zebrafish Ahr2 and human AHR, which are pivotal components in the SRC toxicity mechanism. Fertilized zebrafish eggs were exposed to SRCs for up to 96 h post fertilization; among these substances, benzyl 2‐naphthyl ether (BNE) caused morphological abnormalities, such as pericardial edema and shortened body length, at relatively low concentrations (1 μM) during embryogenesis. Gene expression of cytochrome P450 1A (cyp1a ) andahr2 was also significantly increased by BNE. Co‐exposure to the AHR antagonist CH‐223191 only partially mitigated BNE's phenotypic effects, despite the effects of 2,3,7,8‐tetrachlorodibenzo‐p‐dioxin being relatively well restored by CH‐223191, indicating BNE's AHR‐independent toxic mechanisms. Furthermore, some SRCs, including BNE, exhibited in silico binding affinity to the estrogen receptor and upregulation ofcyp19a1b gene expression. Therefore, additional insights into the toxicity of SRCs and their mechanisms are essential. The present results provide important information on SRCs and other papermaking chemicals that could help minimize the environmental impact of the paper industry.Environ Toxicol Chem 2024;00:1–13. © 2024 SETAC [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
15. Exhibit 11: ADEA Position Papers.
- Published
- 2024
- Full Text
- View/download PDF
16. X‐ray diffraction, scanning electronic microscopy, and Fourier transform infrared spectroscopy analysis of toilet paper.
- Author
-
Müller, Marcelo, Basso, Rodrigo L. O., Delai, Robson M., and Hönnicke, Marcelo G.
- Subjects
FOURIER transform infrared spectroscopy ,TOILET paper ,X-ray diffraction ,MICROSCOPY - Abstract
At the shelf, highly bleached (soft and white) toilet papers samples of different brands and one grayish toilet paper sample of another brand have been selected for spectroscopy and X‐ray diffraction analysis, in order to figure out if they can present allergic components in their chemical composition. Traces of Ca, associated with the presence of CaC2O4H2O was found in one of the highly bleached toilet paper samples and in the grayish one. However, no traces of fungi were found in the scanning electronic microscopy images. A trial correlation between the chemical composition and mechanical properties of the tested toilet paper samples, surprisingly shows that the grayish toilet paper sample presents the highest softness. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
17. Evaluating Properties of Green Concrete Produced Using Waste Marble Powder, Quarry Dust, and Paper Pulp.
- Author
-
Disale, Anil, Nayak, Chittaranjan, Suryawanshi, Nagesh, Jadhav, Nitin, Jagdale, Umesh, Kate, Gunwant, Thakare, Sunil, Pandey, Shri Prakash, Sharma, Prakhakar, and Saxena, Amit
- Subjects
- *
PAPER pulp , *CONCRETE , *INDUSTRIAL wastes , *ALKALI-aggregate reactions , *CONSTRUCTION materials , *DETERIORATION of concrete - Abstract
Industrial waste locks are used as raw materials to reduce harmful effects on the environment and improve environmental performance. Marble clay powder can be used as a filling aid and can fill voids in concrete structures. This article will show you how to use a maximum natural sand alternative in concrete with marble powder and quarry dust. The challenge of the 21st century is to change to a new form that can support the natural system. This necessitates a radical rethinking of how to give the community infrastructure and housing. Making a concerted effort to develop novel, innovative, and alternative construction materials may be necessary. Jungles of concrete around cause's impact on the Environment and it would result in climate change. Mankind must avoid the use of things that are detrimental to the environment. So in this paper, it is decided to address the issue by adopting the use of the green concrete concept which is environmentally friendly. Green concrete is concrete made up using industrial wastes such as marble powder, quarry dust, wood ash, paper pulp, etc. Green concrete, which is capable of sustainable development, helps to reduce the consumption of natural resources, energy use, and environmental pollution. Green concrete is more cost‐effective than ordinary concrete and reduces the cost of resultant concrete by 14%–20%. It is also observed that the alkali‐aggregate reaction and sulfate attack resistance of concrete are both significantly improved. Green concrete is a useful tool for lowering environmental pollution and enhancing concrete's resistance to harsh conditions. All stages of infrastructure construction and rehabilitation will follow this trend of using new cement and techniques. Green concrete's adaptability and its performance derivatives will meet a variety of future needs. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
18. Diagnostic study of human papillomavirus DNA detection in cervical and vaginal samples using the filter paper card.
- Author
-
Ramesan, Chiyancheri Koroth, Calvin, John Dickson, Thomas, Anitha, Fletcher, John, Kannangai, Rajesh, Abraham, Priya, and Peedicayil, Abraham
- Subjects
- *
HUMAN papillomavirus , *FILTER paper , *HUMAN experimentation - Abstract
Objective: To determine the accuracy of high‐risk human papillomavirus (HPV) DNA samples on filter paper in comparison to specimen transport medium (STM). Methods: This was a cross‐sectional diagnostic study of 42 consecutive women who were prospectively recruited. Each had self‐collected vaginal samples on filter paper, physician‐collected cervical samples on filter paper, and physician‐collected cervical samples in STM. HPV DNA testing was performed with a Hybrid Capture 2 system (Qiagen). Sensitivity, specificity, negative predictive value (NPV), positive predictive value (PPV), and agreement of filter paper methods with the standard procedure were calculated. Results: The overall prevalence of HPV in STM was 67.5%. Detection of HPV DNA in the physician‐collected cervical samples on filter paper had a sensitivity of 77.8%, a specificity of 100%, a PPV of 100%, and an NPV of 68.4%. The patient's self‐sampling on filter paper had a sensitivity of 66.7%, a specificity of 100%, a PPV of 100%, and an NPV of 59.1%. The agreement between STM method and physician‐collected sample on filter paper was substantial, (κ = 0.695, P < 0.001), while the agreement between STM and self‐collected samples on filter paper was moderate (κ = 0.565, P < 0.001). Most patients reported that self‐collection was acceptable (100%), painless (95%), and not embarrassing (95%). Conclusion: Filter paper, with dried self‐collected vaginal samples, can be used to detect high‐risk HPV with acceptable accuracy. Synopsis: Self‐collected vaginal samples on filter paper, to detect high‐risk human papillomavirus, is better for women, easier to transport to central laboratories, and has acceptable accuracy. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
19. Publication and collaboration anomalies in academic papers originating from a paper mill: Evidence from a Russia‐based paper mill.
- Author
-
Abalkina, Anna
- Subjects
- *
PAPER mills , *PREDATORY publishing - Abstract
This study attempts to detect papers originating from the Russia‐based paper mill 'International Publisher' LLC. A total of 1,063 offers to purchase co‐authorship on a fraudulent papers published from 2019 to mid‐2022 on the 123mi.ru website were analysed. This study identifies at least 451 papers that are potentially linked to the paper mill, including one preprint, a duplication paper and 16 republications of papers erroneously published in hijacked journals. Evidence of suspicious provenance from the paper mill is provided: matches in title, number of co‐authorship slots, year of publication, country of the journal, country of a co‐authors and similarities of abstracts. These problematic papers are co‐authored by scholars from at least 39 countries and are submitted to both predatory and reputable journals. This study also demonstrates collaboration anomalies in questionable papers and examines indicators of the Russia‐based paper mill. The value of co‐authorship slots offered by 'International Publisher' LLC from 2019 to 2021 is estimated at $6.5 million. Since this study only analysed a single paper mill, it is likely that the number of papers with forged authorship is much higher. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
20. Chemical and Imaging Analysis of Questioned Document Paper by FTIR, ICP and Video Spectral Comparator (VSC) for Forensic Discrimination.
- Author
-
Kizil, Soner
- Subjects
- *
ANALYTICAL chemistry , *IMAGE analysis , *COMPARATOR circuits , *LIGHT sources , *CRIMINAL procedure - Abstract
Forensic document examination has been considered one of the most important fields in the forensic science. For this, a quick, effective, and cheap techniques for evaluation of forensic evidence is highly required. This study explores the comparison of A4 document paper by chemical and physical analysis. 16 of white A4 paper from different brands were analyzed by FTIR for investigation of structural characteristics. Video Spectral Comparator 8000 has been used to compare the A4 papers under different light source. The inorganic filler composition in the paper is also explored by ICP‐OES. The calcium carbonate content in document papers play a discriminant role which found to be between 16.02 % and 35.54 %. Also, water contact angle has been utilized in order to examine the surface of paper which is generally related to the inorganic filler and other additives. The WCA results ranged between 83° and 111° that enable quick and easy way to compare A4 document papers. The experimental results have demonstrated that besides FTIR methods, other methods such as ICP‐OES for elemental composition, WCA for wetting test, VSC for visualization under different light of source could have been applied for comparison of document papers in case of criminal cases. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
21. A Flexible Reduced Graphene Oxide‐based Paper for Supercapattery Design: Effect of Polyindole Thin Films and Zinc Oxide Nanoparticles.
- Author
-
Mollamehmetoğlu, Esra Atalay and Alanyalıoğlu, Murat
- Subjects
- *
ZINC oxide thin films , *ZINC oxide , *NANOPARTICLES , *GRAPHENE , *ENERGY density , *FLEXIBLE electronics - Abstract
Flexible graphene‐based paper electrodes (FGPEs) are a new class of study and the research on this electrode material has been carried out for approximately ten years. FGPEs have many advantages compared to classical solid electrodes such as being flexible, foldable, adaptable to flexible electronics, being cut, easily shaped, and effective and adjustable modification. In this work, the applicability of FGPEs modified with polyindole (PIN) thin films and zinc oxide nanoparticles (ZnO‐NPs) to energy‐storage systems as a supercapattery design is presented, and especially the limitations of ZnO‐NPs for energy‐storage applications are revealed to inform researchers working for a similar purpose. Capacitance calculations have been performed using both cyclic voltammetry (CV) and galvanostatic charge‐discharge (GCD) experiments. It was observed that the rGO/PIN paper demonstrated almost 30 times more energy‐storage capacity than that of the rGO/PIN/ZnO paper due to the electrochemical instability of ZnO‐NPs on the flexible electrode platform at the applied potential region in 1.0 M HClO4 solution. The rGO/PIN paper with a highly flexible property exhibited an energy density of 74.5 W h cm−2 and a power density of 2258 W cm−2 at a current density of 2.2 mA cm−2, revealing hopeful results for future modular and flexible approaches. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
22. Recent Research Progress of Paper‐Based Supercapacitors Based on Cellulose.
- Author
-
Xiong, Chuanyin, Wang, Tianxu, Han, Jing, Zhang, Zhao, and Ni, Yonghao
- Subjects
SUPERCAPACITORS ,CELLULOSE ,ENERGY storage ,CLEAN energy ,SUSTAINABLE development - Abstract
In recent years, paper‐based functional materials have received extensive attention in the field of energy storage due to their advantages of rich and adjustable porous network structure and good flexibility. As an important energy storage device, paper‐based supercapacitors have important application prospects in many fields and have also received extensive attention from researchers in recent years. At present, researchers have modified and regulated paper‐based materials by different means such as structural design and material composition to enhance their electrochemical storage capacity. The development of paper‐based supercapacitors provides an important direction for the development of green and sustainable energy. Therefore, it is of great significance to summarize the relevant work of paper‐based supercapacitors for their rapid development and application. In this review, the recent research progress of paper‐based supercapacitors based on cellulose was summarized in terms of various cellulose‐based composites, preparation skills, and electrochemical performance. Finally, some opinions on the problems in the development of this field and the future development trend were proposed. It is hoped that this review can provide valuable references and ideas for the rapid development of paper‐based energy storage devices. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
23. Direct Ink Writing of Nanocellulose and PEDOT:PSS for Flexible Electronic Patterned and Supercapacitor Papers.
- Author
-
Lay, Makara, Say, Mehmet Girayhan, and Engquist, Isak
- Subjects
- *
ELECTRONIC paper , *CARBON nanofibers , *ORGANIC electronics , *FLEXIBLE electronics , *CLEAN energy , *ELECTRIC currents , *SUPERCAPACITORS - Abstract
Printed electronic paper identifies its interest in flexible organic electronics and sustainable and clean energy applications because of its straightforward production method, cost‐effectiveness, and positive environmental impact. However, current limitations include restricted material thickness and the use of supporting substrate for printing. Here, 2D and 3D electronic patterned paper are fabricated from direct ink writing (DIW) nanocellulose and PEDOT:PSS‐based materials using syringe deposition and 3D printing. The conductor patterns are integrated in the bulk of the paper, while non‐conductive sections are used as support to form free‐standing paper. The strong interface between the patterns of electronic patterned paper gives mechanical stability for practical handling. The conductive paper‐based electrode has 202 S cm−1 and is capable of handling electric current up to 0.7 A, which can be used for high‐power devices. Printed supercapacitor papers show high specific energy of 4.05 Wh kg−1, specific power of 4615 W kg−1 at 0.06 A g−1, and capacitance retention above 95% after 2000 cycles. The new design structure of electronic patterned papers presents a solution for additive manufacturing of paper‐based composites for supercapacitors, wearable electronics, or sensors for smart packaging. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
24. A comparative study of the conference papers of mainland China's double first‐class universities.
- Author
-
Zhang, Guijie and Wei, Fangfang
- Subjects
- *
CONFERENCE papers , *COMPARATIVE studies , *CITATION indexes , *DATABASES , *PSYCHIATRY education - Abstract
This paper analyses the conference papers published by double first‐class universities from mainland China between 2006 and 2019. The main findings are as follows: first, the number of conference papers from different double first‐class universities varied greatly, with the annual numbers of papers in the China Proceedings of Conferences Full‐text Database (CPCD) and in the Conference Proceedings Citation Index (CPCI) fluctuating during this period. Second, most of the top 10 disciplines of the papers in the CPCD and CPCI were in the natural sciences, with only two in the social sciences. The CPCD papers and CPCI papers had some overlap in their disciplinary distributions. Third, the CPCD and CPCI papers differed little in total number, with the number of CPCI papers being slightly higher than the number of CPCD papers. With the introduction of new regulations from the Ministry of Science and Technology (MST), there will likely be an increase in the number of Chinese‐language conference papers in the future. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
25. Conductive Korean Traditional Paper (Hanji) Coupled with Ag Nanowire for Functional Electronic Paper Windows in Hanok.
- Author
-
Kim, Yong Jun, Choi, Seo‐Yun, Shin, Hak, and Kim, Han‐Ki
- Subjects
- *
ELECTRONIC paper , *TOUCH screens , *STAPHYLOCOCCUS aureus , *ELECTROMAGNETIC interference , *KLEBSIELLA pneumoniae , *LAMINATED composite beams , *ELECTROMAGNETIC shielding , *NANOWIRES , *WOODEN beams - Abstract
Korean traditional paper known as Hanji is coupled with Ag nanowires (NWs) to be used as multi‐functional paper windows in wooden flame doors of a traditional Korean house (Hanok). The Ag NW is uniformly embedded in a handmade Hanji, consisting of multiple laminated sheets formed through ssangbal filtering up and spray method. The combination demonstrates a low sheet resistance of 28 Ohm square−1 because of a percolating network structure of Ag NWs, which is apt for interconnectors and electrodes. Owing to the flexibility of the Hanji and Ag NWs, outstanding mechanical flexibility, apt for curved or flexible electronic paper windows, is observed. To further examine the potential of the multi‐functional electronic paper window, anti‐bacterial and electromagnetic interference shield properties of the Hanji are also investigated. It is noted that the functional Hanji sterilizes 99.9% of staphylococcus aureus and Klebsiella pneumonia and shows 15 dB (12–18 GHz) shielding efficiency due to the existence of the metallic Ag NWs network. In addition, successful operation of Hanji‐based interconnectors, thin film heaters, and touch panels demonstrates that the Hanji‐based electronic paper window can be used as a device‐integrated paper window in traditional Hanok or oriental traditional houses. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
26. Rapid on‐site detection of persistent organic pollutants using multiwalled carbon nanotube–modified paper spray ionization and a miniature mass spectrometer.
- Author
-
Guo, Xiangyu, Li, Junfang, Bai, Hua, and Ma, Qiang
- Subjects
- *
PERSISTENT pollutants , *CARBON paper , *POLYCYCLIC aromatic hydrocarbons , *CARBON nanotubes , *MASS spectrometers , *ION traps , *ENVIRONMENTAL protection - Abstract
Rationale: Rapid on‐site detection of persistent organic pollutants (POP) is highly desirable for environmental protection. Methods: Herein, a rapid on‐site analytical workflow was developed for the investigation of polycyclic aromatic hydrocarbons and perfluorinated compounds using multiwalled carbon nanotube–modified paper spray ionization (PSI) coupled with a miniature ion trap mass spectrometer. Critical parameters regarding PSI and miniature mass spectrometry analysis were optimized. Results: The analytical performance of the developed method was evaluated under optimized conditions, obtaining a short analysis duration of less than 1 min, sufficient linearity with correlation coefficients greater than 0.99, acceptable recovery rates of 93.1%–105.8% with relative standard deviations of between 3.5% and 10.3%, and reasonable sensitivity with limits of detection and quantitation of 2–200 and 5–500 μg/L, respectively. Conclusions: Considering these aspects, it was concluded that the present approach demonstrated a promising solution for rapid on‐site detection of emerging POPs. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
27. Chemically Oxidized Carbon Paper as a Free‐Standing Electrode for Supercapacitor: An Insight into Surface and Diffusion Contribution.
- Author
-
Waseem, Sadiya, Dubey, Prashant, Singh, Mandeep, Sundriyal, Shashank, and Maheshwari, Priyanka H.
- Subjects
- *
CARBON paper , *ENERGY density , *SUPERCAPACITOR electrodes , *POTASSIUM dichromate , *POWER density , *RAMAN spectroscopy - Abstract
Carbon paper has been synthesized by paper making process followed by composite formation, and further chemically oxidized by immersing into a mixture of sulphuric acid and potassium dichromate to be used as an electrode for supercapacitor applications. XRD and Raman spectra were used to analyze the structure, and the defects in the samples respectively, in due course of oxidation. FESEM images revealed the morphology of oxidized samples to be rougher, which contributes towards increased active sites for reaction. The sample (COCP‐60) optimized via electrochemical studies, was further tested in various electrolytes to study the electrode/electrolyte interaction. It delivered a highest areal capacitance of 6.02 F/cm2 (231.5 F/g) in acidic electrolyte at a current density of 5 mA/cm2 (0.19 A/g). This findings were further corroborated by surface and diffusion contribution studies wherein it was found that diffusion is more profound with acidic electrolyte. The supercapacitor device fabricated with COCP‐60 electrode delivered an energy density of 0.41 Wh/cm2 at 2.83 W/cm2 power density with coulombic efficiency of 98 %, and cyclic stability of ∼90 % for over 5000 cycles. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
28. 3.3: Fabricating Self‐Powered E‐paper on Paper Substrates and Driven by Triboelectric Nanogenerator Module.
- Author
-
Liu, Guangyou, Gu, Yifan, Zhong, Min, He, Zhi, Wang, Li, Qin, Zong, Hou, Tingting, Pu, Xiong, and Yang, Bo-ru
- Subjects
INDIUM tin oxide ,ELECTRONIC paper ,GLASS-reinforced plastics ,INTERNET of things - Abstract
The electronic paper (E‐paper) has the advantages of low power consumption, flexibility, small form factor, and eye‐friendliness. However, most E‐paper substrates are made by indium tin oxide (ITO) glasses or plastic substrates, which are hard to degrade in the natural environment. Our previous work introduced a self‐powered E‐paper (SPEP) integrated with triboelectric nanogenerator (TENG). Here, a paper‐based SPEP was further demonstrated, driven by a TENG module without any other power module. By combining the self‐powered driving mode and paper substrates, this work showed novel possibilities for E‐paper devices, which provided great potential in future Internet of things (IoT) displays. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
29. Digitally-enabled, person-centred care (PCC) in allergen immunotherapy: An ARIA-EAACI Position Paper.
- Author
-
Pfaar O, Sousa-Pinto B, Papadopoulos NG, Larenas-Linnemann DE, Ordak M, Torres MJ, Mösges R, Klimek L, Zuberbier T, Matricardi PM, Berger UE, Berger M, Dramburg S, Mahler V, Toppila-Salmi SK, Bergmann KC, Ollert M, Tripodi S, Jutel M, Agache I, Eguiluz-Gracia I, Canonica GW, Akdis CA, Sokolowska M, Sofiev M, Shamji MH, Czarlewski W, Fonseca JA, Bedbrook A, and Bousquet J
- Subjects
- Humans, Mobile Applications, Rhinitis, Allergic therapy, Rhinitis, Allergic immunology, Asthma therapy, Asthma immunology, Patient-Centered Care, Desensitization, Immunologic methods, Telemedicine
- Abstract
In rhinitis and asthma, several mHealth apps have been developed but only a few have been validated. However, these apps have a high potential for improving person-centred care (PCC), especially in allergen immunotherapy (AIT). They can provide support in AIT initiation by selecting the appropriate patient and allergen shared decision-making. They can also help in (i) the evaluation of (early) efficacy, (ii) early and late stopping rules and (iii) the evaluation of (carried-over) efficacy after cessation of the treatment course. Future perspectives have been formulated in the first report of a joint task force (TF)-Allergic Rhinitis and Its Impact on Asthma (ARIA) and the European Academy of Allergy and Clinical Immunology (EAACI)-on digital biomarkers. The TF on AIT now aims to (i) outline the potential of the clinical applications of mHealth solutions, (ii) express their current limitations, (iii) make proposals regarding further developments for both clinical practice and scientific purpose and (iv) suggest which of the tools might best comply with the purpose of digitally-enabled PCC in AIT., (© 2024 The Authors. Allergy published by European Academy of Allergy and Clinical Immunology and John Wiley & Sons Ltd.)
- Published
- 2024
- Full Text
- View/download PDF
30. Granulocytes and mast cells in AllergoOncology-Bridging allergy to cancer: An EAACI position paper.
- Author
-
Pascal M, Bax HJ, Bergmann C, Bianchini R, Castells M, Chauhan J, De Las Vecillas L, Hartmann K, Álvarez EI, Jappe U, Jimenez-Rodriguez TW, Knol E, Levi-Schaffer F, Mayorga C, Poli A, Redegeld F, Santos AF, Jensen-Jarolim E, and Karagiannis SN
- Abstract
Derived from the myeloid lineage, granulocytes, including basophils, eosinophils, and neutrophils, along with mast cells, play important, often disparate, roles across the allergic disease spectrum. While these cells and their mediators are commonly associated with allergic inflammation, they also exhibit several functions either promoting or restricting tumor growth. In this Position Paper we discuss common granulocyte and mast cell features relating to immunomodulatory functions in allergy and in cancer. We highlight key mechanisms which may inform cancer treatment and propose pertinent areas for future research. We suggest areas where understanding the communication between granulocytes, mast cells, and the tumor microenvironment, will be crucial for identifying immune mechanisms that may be harnessed to counteract tumor development. For example, a comprehensive understanding of allergic and immune factors driving distinct neutrophil states and those mechanisms that link mast cells with immunotherapy resistance, might enable targeted manipulation of specific subpopulations, leading to precision immunotherapy in cancer. We recommend specific areas of investigation in AllergoOncology and knowledge exchange across disease contexts to uncover pertinent reciprocal functions in allergy and cancer and allow therapeutic manipulation of these powerful cell populations. These will help address the unmet needs in stratifying and managing patients with allergic diseases and cancer., (© 2024 The Author(s). Allergy published by European Academy of Allergy and Clinical Immunology and John Wiley & Sons Ltd.)
- Published
- 2024
- Full Text
- View/download PDF
31. AllergoOncology: Biomarkers and refined classification for research in the allergy and glioma nexus-A joint EAACI-EANO position paper.
- Author
-
Turner MC, Radzikowska U, Ferastraoaru DE, Pascal M, Wesseling P, McCraw A, Backes C, Bax HJ, Bergmann C, Bianchini R, Cari L, de Las Vecillas L, Izquierdo E, Lind-Holm Mogensen F, Michelucci A, Nazarov PV, Niclou SP, Nocentini G, Ollert M, Preusser M, Rohr-Udilova N, Scafidi A, Toth R, Van Hemelrijck M, Weller M, Jappe U, Escribese MM, Jensen-Jarolim E, Karagiannis SN, and Poli A
- Subjects
- Humans, Brain Neoplasms immunology, Brain Neoplasms diagnosis, Brain Neoplasms etiology, Disease Susceptibility, Animals, Glioma immunology, Glioma etiology, Glioma diagnosis, Hypersensitivity diagnosis, Hypersensitivity immunology, Hypersensitivity etiology, Biomarkers
- Abstract
Epidemiological studies have explored the relationship between allergic diseases and cancer risk or prognosis in AllergoOncology. Some studies suggest an inverse association, but uncertainties remain, including in IgE-mediated diseases and glioma. Allergic disease stems from a Th2-biased immune response to allergens in predisposed atopic individuals. Allergic disorders vary in phenotype, genotype and endotype, affecting their pathophysiology. Beyond clinical manifestation and commonly used clinical markers, there is ongoing research to identify novel biomarkers for allergy diagnosis, monitoring, severity assessment and treatment. Gliomas, the most common and diverse brain tumours, have in parallel undergone changes in classification over time, with specific molecular biomarkers defining glioma subtypes. Gliomas exhibit a complex tumour-immune interphase and distinct immune microenvironment features. Immunotherapy and targeted therapy hold promise for primary brain tumour treatment, but require more specific and effective approaches. Animal studies indicate allergic airway inflammation may delay glioma progression. This collaborative European Academy of Allergy and Clinical Immunology (EAACI) and European Association of Neuro-Oncology (EANO) Position Paper summarizes recent advances and emerging biomarkers for refined allergy and adult-type diffuse glioma classification to inform future epidemiological and clinical studies. Future research is needed to enhance our understanding of immune-glioma interactions to ultimately improve patient prognosis and survival., (© 2024 European Academy of Allergy and Clinical Immunology and John Wiley & Sons Ltd.)
- Published
- 2024
- Full Text
- View/download PDF
32. Note-taking by university students on paper or a computer: Strategies during initial note-taking and revision.
- Author
-
Cojean S and Grand M
- Abstract
Background: Taking notes during learning has benefits both during class (through writing things down to encode information) and after class (by using written notes as external storage for revision). Comparisons of note-taking methods (i.e., using paper or a computer) have mainly shown that paper leads to better learning. However, previous studies have mostly been conducted in laboratory contexts., Aims: The current study investigates university students' perceptions of the efficacity of their own preferred note-taking method, along with the strategies they employ., Sample: Data were collected from 108 university students., Methods: Students answered a questionnaire about their note-taking strategies during initial note-taking (in class) and revision (after class)., Results: The results show that students who take notes on paper do not consider their method to be more effective, but they report engaging in more reformulation and less multitasking. Students who take notes on a computer are more likely to reformat their notes, and thus to reformulate at a later stage. For all students, review sheets are mostly done on paper., Conclusions: These results suggest that although students are not necessarily aware of the benefits of reformulation associated with handwriting on paper during initial note-taking, when revising, they tend to choose handwriting and benefit from reformulation when aiming for deeper processing. Therefore, revision activities remain mainly paper-based., (© 2024 British Psychological Society.)
- Published
- 2024
- Full Text
- View/download PDF
33. Ultrahigh‐Rate On‐Paper PEDOT:PSS‐Ti2C Microsupercapacitors with Large Areal Capacitance.
- Author
-
Xue, Han, Huang, Po‐Han, Göthelid, Mats, Strömberg, Axel, Niklaus, Frank, and Li, Jiantong
- Subjects
- *
POWER resources , *WEARABLE technology , *ENERGY storage , *POWER density , *ELECTRIC capacity , *SUPERCAPACITOR electrodes , *SUPERCAPACITORS - Abstract
The growing demands of sustainable, portable, and wearable electronics pose new demands on miniaturized energy storage devices that can be integrated on flexible substrates such as paper. Microsupercapacitors (MSCs), especially MXene‐based pseudocapacitive MSCs with fast charging/discharging rate, high power density, and long cycle life, are competitive candidates as power supply for emerging flexible and wearable on‐paper electronics. However, few studies have reported MXene‐based on‐paper MSCs to simultaneously attain ultrahigh‐rate (>1000 mV s−1) capability and large areal capacitance >10 mF cm−2. Herein, ultrafast metal‐free on‐paper MSCs are fabricated through leveraging the synergistic effect of conductive PEDOT:PSS and capacitive MXene (Ti2C) to achieve a remarkable areal capacitance of 30 mF cm−2 and long lifetime (>96% capacitance retention after 10 000 cycles) at an ultrahigh scan rate of 1000 mV s−1, outperforming most of the present on‐paper or MXene‐containing MSCs. Moreover, the printed on‐paper metal‐free MSC arrays attain extended working voltage window of up to 6 V and outstanding capacitive performance at an ultrahigh scan rate of 10 V s−1. The on‐paper PEDOT:PSS‐Ti2C composite MSCs offer new opportunities as eco‐friendly microscale power sources for emerging paper‐based portable and wearable electronics. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
34. Advances in Paper‐Based Photodetectors: Fabrications, Performances, and Applications.
- Author
-
Tang, Xing, Yang, Jingwen, Duan, Zaihua, Bu, Yichen, Yuan, Zhen, Jiang, Yadong, and Tai, Huiling
- Subjects
- *
PHOTODETECTORS , *PHOTOELECTRICITY , *SPECTRAL sensitivity , *BIODEGRADABLE materials , *WEARABLE technology - Abstract
With the development of wearable electronic technology, the flexible photodetectors have attracted widespread attention, and it is of great significance to develop flexible, eco‐friendly and low‐cost photodetectors. Cellulose paper, as a flexible, eco‐friendly, low‐cost, lightweight, customizable, biodegradable and renewable material, has received enthusiastic attention and rapid development in the field of photodetectors in recent years. In this review, it is focused on the research progress of paper‐based (PB) photodetectors. First, the fabrication methods of PB photodetectors are discussed, including electrode materials and optoelectronic functional materials. Then, this review systematically summarizes and analyzes the achievements of PB photodetectors on photoelectric performances (spectral response range, responsivity, detectivity, response/recovery times and on/off ratio) and flexibility characteristics (bending angle and bending cycle). In terms of key performance indicators, the PB photodetectors reported so far can detect multiple wavelengths of light from UV to near‐infrared with the maximum detectivity of 1013 Jones. In addition, the various applications of PB photodetectors is reviewed and discussed. Finally, it is look forward to the future development of PB photodetectors in terms of fabrication methods, photoelectric and flexible performances, and applications. With this review, it is hope that it will promoted the future development of PB photodetectors. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
35. Monolithic Fabrication of Metal‐Free On‐Paper Self‐Charging Power Systems.
- Author
-
Su, Yingchun, Xue, Han, Fu, Yujie, Chen, Shiqian, Li, Zheng, Li, Lengwan, Knoks, Ainars, Bogdanova, Olga, Lesničenoks, Pēteris, Palmbahs, Roberts, Laurila, Mika‐Matti, Mäntysalo, Matti, Hammar, Mattias, Hallén, Anders, Nordell, Nils, and Li, Jiantong
- Subjects
- *
NANOGENERATORS , *CONDUCTIVE ink , *POWER resources , *MANUFACTURING industries - Abstract
Self‐charging power systems (SCPSs) are envisioned as promising solutions for emerging electronics to mitigate the increasing global concern about battery waste. However, present SCPSs suffer from large form factors, unscalable fabrication, and material complexity. Herein, a type of highly stable, eco‐friendly conductive inks based on poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) are developed for direct ink writing of multiple components in the SCPSs, including electrodes for miniaturized spacer‐free triboelectric nanogenerators (TENGs) and microsupercapacitors (MSCs), and interconnects. The principle of "one ink, multiple functions" enables to almost fully print the entire SCPSs on the same paper substrate in a monolithic manner without post‐integration. The monolithic fabrication significantly improves the upscaling capability for manufacturing and reduces the form factor of the entire SCPSs (a small footprint area of ≈2 cm × 3 cm and thickness of ≈1 mm). After pressing/releasing the TENGs for ≈79000 cycles, the 3‐cell series‐connected MSC array can be charged to 1.6 V while the 6‐cell array to 3.0 V. On‐paper SCPSs are promising to serve as lightweight, thin, sustainable, and low‐cost power supplies. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
36. Paper Spray Mass Spectrometry with On‐Paper Electrokinetic Manipulations: Part‐Per‐Trillion Detection of Per/Polyfluoroalkyl Substances in Water and Opioids in Urine.
- Author
-
Rydberg, Magnus, Bruening, Merlin L., and Manicke, Nicholas E.
- Subjects
- *
FLUOROALKYL compounds , *MASS spectrometry , *SOLID phase extraction , *CHEMICAL ionization mass spectrometry , *ELECTROSPRAY ionization mass spectrometry , *OPIOIDS , *DRINKING water , *SPRAYING & dusting in agriculture - Abstract
We developed a simple, paper‐based device that enables sensitive detection by mass spectrometry (MS) without solid phase extraction or other sample preparation. Using glass fiber filter papers within a 3D printed holder, the device employs electrokinetic manipulations to stack, separate, and desalt charged molecules on paper prior to spray into the MS. Due to counter‐balanced electroosmotic flow and electrophoresis, charged analytes stack on the paper and desalting occurs in minutes. One end of the paper strip was cut into a sharp point and positioned near the inlet of a MS. The stacked analyte bands move toward the paper tip with the EOF where they are ionized by paper spray. The device was applied to analysis of PFAS in tap water with sub part‐per‐trillion detection limits in less than ten minutes with no sample pretreatment. Analysis of opioids in urine also occurs in minutes. The crucial parameters to enable stacking, separation, and MS ionization of both positively and negatively charged analytes were determined and optimized. Experimental and computational modeling studies confirm the electrokinetic stacking and analyte transport mechanisms. On‐paper separations were carried out by stacking analyte bands at different locations depending on their electrophoretic mobility, achieving baseline separation in some cases. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
37. Publishing an applied statistics paper: Guidance and advice from editors.
- Author
-
Anderson‐Cook, Christine M., Lu, Lu, Gramacy, Robert B., Jones‐Farmer, L. Allison, Montgomery, Douglas C., and Woodall, William H.
- Subjects
- *
RESEARCH personnel , *ADVICE , *WRITING processes , *MENTORING , *PUBLISHING , *ELECTRONIC publications , *ONLINE comments - Abstract
One of the tasks required of most statistics researchers and academic faculty is to publish their innovative ideas in the peer‐reviewed literature. In this paper, we provide guidance about the different stages of the process as experienced authors and offer advice from those who hold the decision about the success or failure of these papers, namely the editors of applied statistics journals. The paper is organized into four sections focusing on the different stages of publishing: (1) Planning what to write about, where to submit and how to organize the paper; (2) The process of writing the paper; (3) Interpreting and responding to peer‐reviews from the journal editors and referees to prepare for resubmission; and (4) General comments about the publication process, including collaboration and mentoring. Each section starts with fundamentals provided by the moderators (C.A.C. and L.L.) on key aspects to consider on each topic and then is followed with discussion from some current and past editors of impactful journals in the field of applied statistics. Our hope is that this collection of insights may help accelerate learning about the process for young researchers and help all researchers to understand some of the important often‐unspoken aspects of the process. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
38. Hydrophobic glass and paper coatings based on plasma polymerized vegetable oils using a novel atmospheric pressure plasma concept.
- Author
-
Bellmann, Martin, Loesch‐Zhang, Amelia, Möck, Dennis M. J., Appelt, Jörn, Geissler, Andreas, and Viöl, Wolfgang
- Subjects
- *
ATMOSPHERIC pressure plasmas , *GLASS coatings , *WATER repellents , *CROSSLINKED polymers , *PLASMA polymerization , *PLASMA-enhanced chemical vapor deposition , *VEGETABLE oils - Abstract
Atmospheric pressure plasma polymerization represents a promising coating technology, addressing drawbacks of traditional processes (solvent use, multistep procedures, etc.) while enabling deposition of thin cross‐linked polymer layers with high contour fidelity. We address technological challenges with a novel plasma device that integrates multiple plasma source benefits and investigate the suitability of two plant‐based precursors, chia and tung oil, for plasma polymerization to hydrophobize glass and paper. Chia oil enables the deposition of thin, covalently bonded hydrophobic polymer layers. Such coatings have diverse applications especially inside the paper industry, where water repellents in the form of internal and surface sizing have always been an essential functionalization step. Using bio‐based precursors and reducing extra chemicals contributes to substituting fossil‐based or harmful substances. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
39. Suitability of Computerised and Pencil‐and‐Paper Neuropsychological Assessments in Healthy Older Culturally and Linguistically Diverse Australians: The CogSCAN Study.
- Author
-
Page, Zara A, Croot, Karen, Brodaty, Henry, Sachdev, Perminder S., Lam, Ben C. P., and Kochan, Nicole A.
- Abstract
Background: Computerised neuropsychological assessments (CNAs) are proposed as more accessible and culturally appropriate alternatives to traditional pencil‐and‐paper neuropsychological assessments (PnPAs) for diagnosing dementia in diverse populations. Whilst some PnPAs have demonstrated cultural and linguistic bias, research investigating the suitability of CNAs for culturally and linguistically diverse (CALD) individuals is limited, especially outside of the United States. Method: This study compared cognitive performance in a heterogenous sample of older Australian CALD English‐speakers and an L1 English‐speaking background (ESB) sample. Cross‐sectional data were drawn from the ongoing CogSCAN Study. Participants were 212 community‐dwelling individuals aged 60‐95 years without a dementia diagnosis (159 ESB/53 CALD). Participants completed a PnPA and/or CNAs, sessions were counterbalanced accordingly. CNA sessions involved two of four commercially‐available CNAs in a randomised order. Differences in the level and pattern of cognitive performance between groups on two CNAs (CANTAB/Cogstate) and a comprehensive PnPA in English, controlling for sociodemographic and health factors, are reported here. Selection of key variables for examination were based on previous findings (PnPA) and test developer recommendations (CNAs). Result: Sample characteristics are summarised in Table 1. CALD participants' cognitive performance on individual tests (Figure 1) was largely comparable to ESB participants on PnPA and each CNA. Significant differences between groups, after Bonferroni correction for multiple comparisons, were observed for the Boston Naming Test (PnPA; a language test widely criticised for use with CALD populations due to culturally biased stimuli) and Rapid Visual Information Processing (CANTAB; a test of attention/processing speed). Among participants who completed PnPA and Cogstate, a significant interaction between group and assessment type on global cognitive performance was observed; ESB participants outperformed CALD participants on PnPA, but not on Cogstate (Figure 2). No significant main effects or interaction were observed in PnPA versus CANTAB. Conclusion: These results showed fewer and smaller discrepancies across groups and assessment types than has been found in previous literature with other CALD samples, perhaps reflecting higher levels of English proficiency, acculturation, and education in English than previous cohorts. Work in progress is investigating the influence of linguistic and acculturation factors on cognitive performance in a larger and more diverse sample. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
40. Effectiveness of wood ash and paper sludge as liming and nutrient sources for annual ryegrass grown in podzolic soils of Newfoundland.
- Author
-
Javed, Bilal, Katanda, Yeukai, Nadeem, Muhammad, Wickremasinghe, Thilini, Farhain, Muhammad M., Thomas, Raymond, Galagedara, Lakshman, Guo, Xiaobin, and Cheema, Mumtaz
- Subjects
WOOD ash ,ITALIAN ryegrass ,RYEGRASSES ,PAPER mill waste ,LIMING of soils ,ACID soils - Abstract
The acidic soils of western Newfoundland require liming for successful production of most crops. Locally sourced paper mill waste wood ash (WA) and paper sludge (SL) have potential as cheaper alternatives to limestone (LIME). Two greenhouse experiments evaluated WA and SL as liming and soil conditioning amendments for annual ryegrass (Lolium multiflorum) production. At 55 days after seeding, soil pH in WA (6.2 and 6.3) and wood ash and paper sludge (WASL) (6.0 and 6.3) were not different from that in LIME (6.0 and 6.5) for Experiments 1 and 2, respectively. However, pH in SL was 0.4 and 0.3 points lower than in LIME. Compared to LIME, WA, SL, and WASL produced 31%–52% and 57%–74% greater biomass yield in Experiments 1 and 2, respectively. N uptake was greater in WA (60 and 129 kg N ha−1) and WASL (51 and 97 kg N ha−1) compared to LIME (40 and 85 kg N ha−1), in Experiments 1 and 2, respectively. SL did not differ from LIME in Experiment 1, but reduced N uptake by 57% in Experiment 2. The results show significant potential of WA as an alternative amendment for liming and yield improvement of annual ryegrass grown in NL podzolic soils. However, SL has limited potential due to the risk of increasing N immobilization and residual soil mineral N when growing conditions are limiting. Combining SL with WA or biochar seemed to alleviate these risks. Overall, the adoption of these amendments for field production systems warrants serious consideration, following supplemental field studies to determine optimal application rates and timing. Core Ideas: The podzolic soils of Newfoundland have low pH and fertility, hence require liming.Locally sourced wastes, such as paper mill wood ash (WA) and sludge (SL), could be used as liming and nutrient sources.WA was equivalent to limestone (LIME) in improving and sustaining optimal soil pH.WA produced 52% and 74% greater annual ryegrass yield than conventional LIME application in podzolic soils. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
41. Comparing urine point‐of‐care tests to screen preeclampsia: Congo‐red dot paper test versus dipstick urinalysis.
- Author
-
Wang, Liying, Gao, Jinsong, Tang, Pingping, Hu, Huiying, Chen, Xiaoxu, Chen, Ziyi, and Sun, Yin
- Abstract
To compare the urine Congo‐red dot paper test (CRD) with dipstick urinalysis to screen preeclampsia (PE). A total of 409 paired spot urine samples were obtained prospectively from women with suspected pre‐eclampsia attending for routine hospital visits. Congo‐red dot paper test and dipstick urinalysis were examined and compared to screen pre‐eclampsia. The agreement between the two urinary test is modest (kappa coefficient = 0.28, 95% CI 0.14–0.42). The specificity of CRD was higher than urinalysis (97.4% vs. 90.4%, p <.001). Urinalysis performed better in sensitivity (77.3% vs. 40.9%, p =.04) and the area under the receiver operating characteristic curves (AUC) (0.84 [95% CI 0.74–0.94] vs. 0.69 [95% CI 0.55–0.83], p =.04) than CRD, respectively. The sensitivity, specificity, AUC of the parallel test of them is 86.4% (64.0%–96.4%), 89.1% (85.5%–92.0%), and 0.88 (95% CI 0.79–0.96). And the serial test is 31.8% (14.7%–54.9%), 98.7% (96.8%–99.5%), 0.65 (95% CI 0.51–0.79), accordingly. The urinalysis is a better diagnosing test for preeclampsia. CRD could aid in the diagnosis of patients with preeclampsia. Combined the two tests in suspected patients may further improve the performance in the diagnosis of preeclampsia. Further study need to be made for its potential clinical practice. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
42. Simulation and analysis of edge ghosting for microcapsule e‐paper based on particle dynamics and light scattering model.
- Author
-
Zeng, Zheng, Liu, Yunhe, Liu, Guangyou, Yang, Jinlan, Yang, Mingyang, Zou, Guowei, Qin, Zong, Wang, Xidu, Deng, Shaozhi, and Yang, Bo‐Ru
- Subjects
- *
PARTICLE dynamics , *ELECTROPHORETIC displays , *ELECTRONIC paper , *PERMITTIVITY , *LIGHT scattering , *INTERNET of things - Abstract
Electronic paper (e‐paper) is a reflective display technology with unique advantages, such as bistability, low‐power consumption, and high ambient contrast ratio. These features make e‐paper a promising candidate for future Internet of Things applications. Among different technologies of e‐paper, electrophoretic display (EPD) is the most successful one for commercialization. However, the edge ghosting (also known as the fringing effect) still limits the performance of EPD. Herein, we established a model of particle dynamics of electrophoresis, simulated the edge ghosting of microcapsule EPD, analyzed the edge ghosting effect, and revealed the relationship between thicknesses, dielectric constants of the back binder layer, and the edge ghosting. Two EPD panels with different thicknesses of back binder layer were demonstrated, which verifies the accuracy of this simulation model. With the proposed model, many device mechanisms and product issues can be analyzed and illustrated, which is supposed to guide the researchers in optimizing the device structure design of EPD. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
43. Cellulose nanocrystal‐modified bio‐based aqueous polyurethane coating agent for kraft paper packaging.
- Author
-
Chen, Xin, Feng, Jianyan, Han, Shuaishuai, Bai, Yang, Wang, Peng, Liu, Haoqiang, Zhang, Peng, and Luo, Xiaomin
- Subjects
KRAFT paper ,POLYOLS ,POLYURETHANES ,CELLULOSE nanocrystals ,CONTACT angle ,FOOD packaging ,CELLULOSE - Abstract
With the implementation of the "plastic restriction order" and the demand for sustainable society development, biodegradable coatings derived from biomass materials have garnered significant interest. This study presents the synthesis of a double‐salt bio‐based waterborne polyurethane (PLA‐WPU) by utilizing poly(lactic acid) polyol (PLA) and isophorone diisocyanate (IPDI) as the main raw materials, along with 2,2‐dihydroxymethylpropionic acid (DMPA) and sodium ethylenediamine ethanesulfonate (A‐95) as a hydrophilic chain extender. Synergistic reinforcement of PLA‐WPU using hydrophobically modified cellulose nanocrystals (M‐CNC) and polycarbonate diimide (PDCDA). At an M‐CNC content of 3% relative to the effective mass of PLA‐WPU, the tensile strength reached 36.12 MPa. After 8 days a lipase PBS solution, the degradation rate reached 54%. Excellent waterproof performance was observed, exhibiting a contact angle of 143.5°. When applied as a surface coating on kraft paper, the Cobb 60 value decreased from 74.0 to 28.6 g/m2, while increasing the tensile strength by 451.3%. Importantly, the kraft paper maintained excellent waterproofing, mechanical strength, and high barrier properties even after repeated folding, high and low‐temperature conditions, and exposure to varying pH solutions. It proved to be both degradable and recyclable, making it a promising alternative to liner paper or plastic membrane, especially in food packaging. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
44. An Antioxidant, Reusable Laser Printed and Recycled Cork Paper Packaging.
- Author
-
Zhai, Wenxiang, Zhong, Yijing, Xu, Min, Wei, Xinli, Cai, Liping, Xia, Changlei, and Wei, Yunzhao
- Abstract
In the realm of food waste recycling, industrial suberoligneous by‐products like cork and peels, pose a challenge for value‐added conversion, primarily due to their intricate structures. This study introduces an innovative approach by utilizing recycled cork as a prime example of repurposing food waste to create a reusable and durable packaging paper. Notably, the manufacturing process of this cork‐based paper avoids the generation of waste liquids from lignin removal, effectively alleviating concerns related to liquid waste pollution. The resulting packaging paper demonstrates remarkable printability, readability, and erasability while offering reusability. Its performance can be fine‐tuned through pH value adjustments. Moreover, this packaging paper exhibits outstanding antioxidative properties and barrier properties, seamlessly integrating superb UV‐blocking proficiency and heightened visible transparency, rendering it highly appealing for sustainable food packaging applications. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
45. Influence of CMC, HPMC, and CNF on Performance of Corrugated Base Paper.
- Author
-
Gao, Lihong, Zhao, Xinpeng, Zhou, Qingbo, Li, Huaying, and Yu, Haibin
- Subjects
- *
FOURIER transform infrared spectroscopy , *CARBOXYMETHYLCELLULOSE , *RICE straw , *DIFFERENTIAL scanning calorimetry , *SCANNING electron microscopy - Abstract
This study aims to comprehensively examine the influence of three distinct additives, namely carboxymethyl cellulose (CMC), hydroxypropyl methylcellulose (HPMC), and cellulose nanofibers (CNF), on the performance enhancement of corrugated base paper. For this purpose, steam‐exploded rice straw was treated with varying concentrations (2, 4, 6, 8, and 10 wt%) of CMC, HPMC and CNF. Analysis of the rice straw pre and post expansion, as well as the modified corrugated base paper, was conducted using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TG), tensile performance testing, and scanning electron microscopy (SEM). Results indicated that adding CMC, CNF, and HPMC to corrugated base paper significantly improved bonding between paper layers, particularly at 2 %, 6 %, and 8 % concentrations, respectively. This enhancement notably increased tensile strength and elastic modulus of the corrugated base paper. Tensile performance saw increases of 57.76 %, 59.01 %, and 60.25 %, while elastic modulus showed increments of 52.7 %, 9.4 %, and 136.69 %, respectively. These findings provide valuable insights for the preparation of corrugated base paper and highlight the potential of CMC, HPMC, and CNF in enhancing paper mechanical properties. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
46. Structure‐Foldable and Performance‐Tailorable PI Paper‐Based Triboelectric Nanogenerators Processed and Controlled by Laser‐Induced Graphene.
- Author
-
Yang, Weixiong, Han, Mingguang, Liu, Fu, Wang, Dan, Gao, Yan, Wang, Guantao, Ding, Xilun, and Luo, Sida
- Subjects
- *
NANOGENERATORS , *POLYIMIDES , *CARBON-based materials , *GRAPHENE , *FRICTION materials , *OPEN-circuit voltage , *SMART structures - Abstract
Laser‐induced graphene (LIG) technology has provided a new manufacturing strategy for the rapid and scalable assembling of triboelectric nanogenerators (TENG). However, current LIG‐based TENG commonly rely on polymer films, e.g., polyimide (PI) as both friction material and carbon precursor of electrodes, which limit the structural diversity and performance escalation due to its incapability of folding and creasing. Using specialized PI paper composed of randomly distributed PI fibers to substantially enhance its foldability, this work creates a new type of TENG, which are structurally foldable and stackable, and performance tailorable. First, by systematically investigating the laser power‐regulated performance of single‐unit TENG, the open‐circuit voltage can be effectively improved. By further exploiting the folding process, multiple TENG units can be assembled together to form multi‐layered structures to continuously expand the open‐circuit voltage from 5.3 to 34.4 V cm−2, as the increase of friction units from 1 to 16. Last, by fully utilizing the unique structure and performance, representative energy‐harvesting and smart‐sensing applications are demonstrated, including a smart shoe to recognize running motions and power LEDs, a smart leaf to power a thermometer by wind, a matrix sensor to recognize writing trajectories, as well as a smart glove to recognize different objects. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
47. Central nervous system prophylaxis in large B-cell lymphoma: A British Society for Haematology Good Practice Paper.
- Author
-
Wilson MR, Cwynarski K, Eyre TA, Smith J, Chaganti S, Fox CP, and McKay P
- Abstract
This Good Practice Paper provides recommendations for the baseline investigation, risk stratification and use of prophylactic interventions for patients with large B-cell lymphoma at risk of central nervous system relapse. Recent evidence which has questioned the role of high-dose methotrexate in this clinical scenario is discussed in detail., (© 2024 British Society for Haematology and John Wiley & Sons Ltd.)
- Published
- 2024
- Full Text
- View/download PDF
48. Diagnosis and initial treatment of transplant-eligible high-risk myeloma patients: A British Society for Haematology/UK Myeloma Society Good Practice Paper.
- Author
-
Kaiser M, Pratt G, Bygrave C, Bowles K, Stern S, and Jenner M
- Abstract
This Good Practice Paper provides recommendations for the diagnosis and initial management of transplant-eligible high-risk myeloma patients. It describes recent updates to the genetic diagnostics of high-risk myeloma and provides recommendations for treatment on the basis of recent prospective clinical trial evidence., (© 2024 British Society for Haematology and John Wiley & Sons Ltd.)
- Published
- 2024
- Full Text
- View/download PDF
49. Giant Humidity Effect of 2D Perovskite on Paper Substrate: Optoelectronic Performance and Mechanical Flexibility.
- Author
-
Wang, He, Zhang, Xi, Ma, Yali, Wang, Mengke, and Wang, Jun
- Subjects
PEROVSKITE ,OPTOELECTRONIC devices ,HUMIDITY ,QUANTUM wells ,FILTER paper ,WEARABLE technology - Abstract
Flexible optoelectronic devices have attracted enormous attention as an essential component in next‐generation wearable devices. To meet the trend of biocompatibility, flexibility and low cost, paper‐based optoelectronic devices have become compelling candidates. Moreover, 2D organic–inorganic metal halide perovskites have been extensively studied for the application in flexible optoelectronic devices owing to their long‐term moisture stability, optoelectronic tunability, and multiple quantum well (MQW) structures. Herein, the paper‐based flexible optoelectronic devices are designed by spin‐coating PEDOT:PSS and (iso‐BA)2MAn‐1PbnI3n+1 (n ≥ 1) on regular filter paper with responsivity of 2.62 mA W−1 and response time (τrise/τdecay) of 0.81/0.18 s at 35% relative humidity (RH). Furthermore, the responsivity may be increased by 250% within the humidity range from 35% to 90%, and remains above 92% of the initial value after measured for 1800 s at 60% RH. This work can pave the way for further studies about the humidity effect on perovskites for next‐generation green wearable electronics. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
50. A new type of lipophilic hydrophobic self‐repairing cellulose insulating paper developed with ST‐110/FAS/PTFE ternary system as coating substrate.
- Author
-
Zeng, Zhenglin, Qin, Jinshan, Wang, Zuhao, Tan, Weimin, and Tang, Chao
- Published
- 2024
- Full Text
- View/download PDF
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.