Search

OAPS/SiC/EP, SiC/EP, A151-SiC/EP composites were prepared and their impact properties, flexural properties, thermal conductivity and insulation and thermal stability were investigated. The comparison of three different composites showed that OAPS/SiC/EP composites had best properties. The thermal conductivity of OAPS/SiC/EP composites increased with increasing filler content. The thermal conductivity of OAPS/SiC/EP composites with 20 wt% SiC was 0.34 W/mK and was 55% higher than that of unmodified EP.

Spherical silica particles with mean diameter 350 nm, 500 nm and 1000 nm were used to modify o-cresol-novolac epoxy resin (ECN) at a ranging constant weight fraction from 0 to 20 wt%. The effects of particle size and fillers content on the impact strength, flexural modulus, dynamic mechanical analysis (DMA), coefficient of thermal expansion (CTE), dielectric properties and bulk resistivities of epoxy composites filled with spherical silica particles were investigated. The results revealed that the impact strength and flexural modulus showed significant improvements with the addition of spherical silica particles. The glass transition temperature (Tg) of composites was higher than that of pure epoxy. The maximum increment of Tg was 34 °C by the addition of 2 wt% D500. The CTE of the composites with different size silica exhibit much lower dimension changes than that of pure epoxy. The dielectric constant was decreased with the addition of spherical silica particles. However, the particle size exhibited weakly effect on the dielectric properties. The bulk resistivities of the composites have greatly improved compared to the pure epoxy and increase with decreasing the particle size.

To improve the impeller safety and reliability of extractable explosion-proof contra-rotating axial fan for mine local ventilation, Extractable Fan FBDC№9.0/2×30 was taken as the research object, and an approximate three-dimensional finite element computation model was built by using ANSYS software. The stress and displacement were calculated, too. By testing, the fan works stably. The air quantity is 655-978 m3/min, total pressure, 3443-412Pa, static pressure, 3314-118Pa. And the highest static pressure efficiency is up to 70.35%, A-weight Specific Sound Level is 17.5dB. Furthermore, the intension and stiffness of the impeller meet requirements. Sample test and field using show that the computation and the model of this impeller are right. Through reasonable design, the impeller of contra-rotating axial fan with equally-thick circular arc blade profile and ordinary hot-rolling low-carbon steel blades has the intension and the stiffness which meets demands, and the air performance reaches higher level.