Search

This article reports results from a European project, where site characteristics were incorporated into the design process of wind turbines, to enable site-specific design. Two wind turbines of different concept were investigated at six different sites comprising normal flat terrain, offshore and complex terrain wind farms. Design tools based on numerical optimization and aeroelastic calculations were combined with a cost model to allow optimization for minimum cost of energy. Different scenarios were optimized ranging from modifications of selected individual components to the complete design of a new wind turbine. Both annual energy yield and design-determining loads depended on site characteristics, and this represented a potential for site-specific design. The maximum variation in annual energy yield was 37% and the maximum variation in blade root fatigue loads was 62%. Optimized site-specific designs showed reductions in cost of energy by up to 15% achieved from an increase in annual energy yield and a reduction in manufacturing costs. The greatest benefits were found at sites with low mean wind speed and low turbulence. Site-specific design was not able to offset the intrinsic economic advantage of high-wind-speed sites. It was not possible to design a single wind turbine for all wind climates investigated, since the differences in the design loads were too large. Multiple-site wind turbines should be designed for generic wind conditions, which cover wind parameters encountered at flat terrain sites with a high mean wind speed. Site-specific wind turbines should be designed for low-mean-wind-speed sites and complex terrain. Copyright © 2002 John Wiley & Sons, Ltd.

This article reports results from a European project, where site characteristics were incorporated into the design process of wind turbines, to enable site‐specific design. Two wind turbines of different concept were investigated at six different sites comprising normal flat terrain, offshore and complex terrain wind farms. Design tools based on numerical optimization and aeroelastic calculations were combined with a cost model to allow optimization for minimum cost of energy. Different scenarios were optimized ranging from modifications of selected individual components to the complete design of a new wind turbine. Both annual energy yield and design‐determining loads depended on site characteristics, and this represented a potential for site‐specific design. The maximum variation in annual energy yield was 37% and the maximum variation in blade root fatigue loads was 62%. Optimized site‐specific designs showed reductions in cost of energy by up to 15% achieved from an increase in annual energy yield and a reduction in manufacturing costs. The greatest benefits were found at sites with low mean wind speed and low turbulence. Site‐specific design was not able to offset the intrinsic economic advantage of high‐wind‐speed sites. It was not possible to design a single wind turbine for all wind climates investigated, since the differences in the design loads were too large. Multiple‐site wind turbines should be designed for generic wind conditions, which cover wind parameters encountered at flat terrain sites with a high mean wind speed. Site‐specific wind turbines should be designed for low‐mean‐wind‐speed sites and complex terrain. Copyright © 2002 John Wiley & Sons, Ltd.

This article reviews the aerodynamic measurement programs on wind turbines that have been performed in the last decades. It is largely based on results from four projects carried out under auspices of the International Energy Agency (IEA), which are denoted as IEA Tasks 14, 18, 20, and 29. The aim of these projects was to collect and analyze aerodynamic measurements on five field facilities (IEA Tasks 14 and 18), the National Renewable Energy Laboratory Phase VI turbine placed in the large NASA Ames wind tunnel (IEA Task 20), and the Mexico turbine placed in the Large Low Speed Facility of the German Dutch Wind tunnel DNW (IEA Task 29). Other experimental programs with an important aerodynamic content are touched upon as well. Research areas for which these measurements have led to important progress are identified. The progress is illustrated with analyses on these experiments. It is shown that detailed aerodynamic measurements are an absolute necessity for the validation and improvement of wind turbine design codes, where it is also concluded that the amount of measurement data which has been produced until now is still far too limited. This article is categorized under: Wind Power > Science and Materials Smoke visualization of tip vortices in the New Mexico experiment.