Search

We demonstrate the controllable generation of infrared dispersive waves (DWs) from customized, in-house fabricated silica microstructured optical fibers (MOFs) by manipulating the location of zero dispersion wavelength (ZDW) through the structure of the fibers. The highly enriched shaping mechanism of arrested soliton in the MOFs with two ZDWs provides a technique for efficient energy transfer into the targeted eye-safe wavelengths at 1.7 and 2.0 µm by the virtue of DW formation.

We report on a compact mid-infrared laser architecture, comprising a chain of $ {\rm ZnGeP}_2 $ZnGeP_2-based optical parametric amplifiers (OPAs), which afford a higher energy yield ($ \mathbin{\lower.3ex\hbox{$\buildrel \lt \over{\smash{\scriptstyle\sim}\vphantom{_x}}$}} 60\;\unicode{x00B5} {\rm J} $∼_x<60µJ at 1 kHz) compared to most conventional OPA gain media transparent in the 2–8-µm wavelength range. Specifically, our OPA scheme allows ready tunability in the molecular fingerprint regime and is tailored for strong-field excitation and coherent control of both stretch and bend (or torsional) vibrational modes in molecules. The OPAs are pumped and directly seeded (via supercontinuum generation) by a 2-µm, 3-ps Ho:YLF regenerative amplifier. The compressibility of the OPA output is demonstrated by a representative measurement of the near-Gaussian temporal profile of a dispersion-compensated 105-fs idler pulse at a central wavelength of 5.1 µm, corresponding to ${\sim}6 $∼6 optical cycles. Detailed numerical simulations closely corroborate the experimental measurements, providing a benchmark and a platform to further explore the parameter space for future design, optimization, and implementation of high-energy, ultrafast, mid-infrared laser schemes.

We experimentally demonstrate in a difference-frequency generation mid-infrared frequency comb source the effect of temporal overlap between pump and signal pulses on the relative intensity noise (RIN) of the idler pulse. When scanning the temporal delay between our 130 fs long signal and pump pulses, we observe a RIN minimum with a 3 dB width of 20 fs delay and a RIN increase of 20 dB in 40 fs delay at the edges of this minimum. We also demonstrate active long-term stabilization of the mid-infrared frequency comb source to the temporal overlap setting corresponding to the lowest RIN operation point by an online RIN detector and active feedback control of the pump–signal pulse delay. This active stabilization setup allows us to dramatically increase the signal-to-noise ratio of mid-infrared absorption spectra.

High-energy, multi-octave supercontinuum (SC) generation in bulk media pumped with picosecond pulses in the mid-infrared, though pivotal in a myriad of applications, poses severe constraints due to wavelength scaling of the critical power criterion and the propensity to induce avalanche-ionization-seeded breakdown mechanisms. Here, we demonstrate a simple experimental geometry, relying on a very low numerical aperture for the pump pulse, and a crystal length commensurate with the Rayleigh length of the focusing geometry, generating a multi-octave, stable SC in yttrium aluminum garnet (YAG). The SC ranges from 500 nm to 3.5 μm (measured at −30  dB with spectral components at wavelengths up to 4.5 μm) when pumped by a 3 ps pulse centered at 2.05 μm in the anomalous dispersion regime. We also investigate the dynamics of filament formation in this interaction regime by monitoring the spectral and temporal evolution of the pulse during its propagation through the length of the crystal.

We experimentally demonstrate several physical concepts necessary for the future development of dielectric laser accelerators—photonic elements that utilize the inelastic interaction between electrons and the optical near fields of laser-illuminated periodic nanostructures. To build a fully photonic accelerator, concatenation of elements, large energy gains, and beam steering elements are required. Staged acceleration is shown using two spatio-temporally separated interaction regions. Further, a chirped silicon grating is used to overcome the velocity dephasing of subrelativistic electrons with respect to its optical near fields, and last, a parabolic grating geometry serves for focusing of the electron beam.

Synchronously pumped optical parametric oscillators (OPOs) are important tools for frequency comb (FC) generation in the mid-IR spectral range, where few suitable laser gain materials exist. For degenerate OPOs, self-phase-locking to the pump FC has been demonstrated. Here, we present a phase noise study of the carrier envelope offset frequency, revealing a −6  dB reduction compared to the pump FC over a wide Fourier frequency range. These results demonstrate that a degenerate OPO can be an ideal coherent frequency divider without any excess noise.

We present an experimental and numerical study on the spectrally resolved pump-to-output intensity noise coupling in soliton fiber oscillators. In our study, we observe a strong pump noise coupling to the Kelly sidebands, while the coupling to the soliton pulse is damped. This behavior is observed in erbium-doped as well as holmium-doped fiber oscillators and confirmed by numerical modeling. It can be seen as a general feature of laser oscillators in which soliton pulse formation is dominant. We show that spectral blocking of the Kelly sidebands outside the laser cavity can improve the intensity noise performance of the laser dramatically.

We demonstrate an experimental technique for both transverse and longitudinal characterization of bunched femtosecond free electron beams. The operation principle is based on monitoring of the current of electrons that obtained an energy gain during the interaction with the synchronized optical near-field wave excited by femtosecond laser pulses. The synchronous accelerating/decelerating fields confined to the surface of a silicon nanostructure are characterized using a highly focused sub-relativistic electron beam. Here the transverse spatial resolution of 450 nm and femtosecond temporal resolution of 480 fs (sub-optical-cycle temporal regime is briefly discussed) achievable by this technique are demonstrated.

We demonstrate intracavity gain shaping inside a 2 μm Ho:YLF regenerative amplifier with a spectral bandwidth of 2.9 nm broadened to 5.4 nm, corresponding to Fourier-limited pulses of 1 ps duration. The intracavity gain shaping is achieved by using a simple etalon, which acts as a frequency-selective filter. The output of the regenerative amplifier is amplified by a single-pass amplifier, and we achieve total energy of 2.2 mJ and pulse duration of 2.4 ps at 1 kHz with pulse fluctuations <1%. The amplifier chain is seeded by a home-built mode-locked holmium-doped fiber oscillator.

We demonstrate a Ho:YLF regenerative amplifier (RA) overcoming bifurcation instability and consequently achieving high extraction energies of 6.9 mJ at a repetition rate of 1 kHz with pulse-to-pulse fluctuations of 1.1%. Measurements of the output pulse energy, corroborated by numerical simulations, identify an operation point (OP) that allows high-energy pulse extraction at a minimum noise level. Complete suppression of the onset of bifurcation was achieved by gain saturation after each pumping cycle in the Ho:YLF crystal via lowering the repetition rate and cooling the crystal. Even for moderate cooling, a significant temperature dependence of the Ho:YLF RA performance was observed.

We demonstrate a simple and compact Holmium-doped fiber femtosecond oscillator, in-band pumped by a commercial Tm-doped fiber laser. The oscillator operates in the dispersion managed soliton regime at net zero intracavity dispersion and delivers >1  nJ pulse energy at 35 MHz repetition rate. The pulse duration directly at the oscillator output is 160 fs FWHM, close to the Fourier-limit of 145 fs FWHM. Using an additional nonlinear compressor stage, sub-100 fs FWHM pulse durations could be achieved. The nonlinear fiber compressor is implemented by a solid core highly nonlinear fiber for spectral broadening and a single mode fiber for pulse compression.

We report on a mid-IR frequency comb source of unprecedented tunability covering the entire 3–10 μm molecular fingerprint region. The system is based on difference frequency generation in a GaSe crystal pumped by a 151 MHz Yb:fiber frequency comb. The process was seeded with Raman-shifted solitons generated in a highly nonlinear suspended-core fiber with the same source. Average powers up to 1.5 mW were achieved at the 4.7 μm wavelength.

We report on a high-power fiber frequency comb exhibiting linear chirped-pulse amplification up to 80W and generating 120fs pulses. By proper matching of the group delay between the fiber stretcher and compressor, a compression ratio of 3100 could be achieved. Carrier envelope offset self-referencing and long-term phase locking to an rf reference is demonstrated, exemplifying the suitability of this system for generating vacuum and extreme-UV frequency combs via enhancement in passive cavities and high harmonic generation.

A femtosecond fiber laser based on thulium-doped double-clad silica fiber with an internal dispersion compensation is presented that generates pulses at a center wavelength of 1976 nm with an energy of 4.3 nJ and a duration of 1.2 ps. The dechirped pulse duration is 294 fs. The pulse energy is more than 2 orders of magnitude above the pulse energy demonstrated previously. Mode locking is achieved using additive pulse mode locking, and dispersion compensation is facilitated by a grating stretcher arrangement.

We present a mode-locked ytterbium fiber laser with a higher-order mode fiber compensating the group-velocity dispersion and partially the third-order dispersion of the single-mode fiber at a wavelength of 1 μm. The generated pulses had an energy of 0.5 nJ and could be dechirped externally to a pulse duration of less than 60 fs. The power spectrum shows a spectral full width at half-maximum of 57 nm.