Search

Competing Interests: The authors declare no competing interests.

Online platforms play a relevant role in the creation and diffusion of false or misleading news. Concerningly, the COVID-19 pandemic is shaping a communication network which reflects the emergence of collective attention towards a topic that rapidly gained universal interest. Here, we characterize the dynamics of this network on Twitter, analysing how unreliable content distributes among its users. We find that a minority of accounts is responsible for the majority of the misinformation circulating online, and identify two categories of users: a few active ones, playing the role of 'creators', and a majority playing the role of 'consumers'. The relative proportion of these groups (approx. 14% creators-86% consumers) appears stable over time: consumers are mostly exposed to the opinions of a vocal minority of creators (which are the origin of 82% of fake content in our data), that could be mistakenly understood as representative of the majority of users. The corresponding pressure from a perceived majority is identified as a potential driver of the ongoing COVID-19 infodemic., (© 2022 The Authors.)

In original experiments, Bak et al. (Wind-Driven Saltation: An Overlooked Challenge for Life on Mars. Astrobiology 2019;19(4):497-505) suggest a new mechanism for the destruction of spores on Mars: abrasion by wind-driven saltation. Bak et al. found that the tumbling of spores on grain surfaces (simulating saltation) was, by far, most lethal at the outset of their experiments. They suggest that it may be sharp edges of the freshly crushed basalt particles used in their experiments that destroy the spores and that these edges abrade away over the course of each experiment. But prior Mars analogue experiments, observations of particles from terrestrial deserts, and imaging from Mars landers suggest that most martian dust has been rounded by billions of years of aeolian processes. If so, saltation on Mars is more likely well simulated by the later stages of the Bak et al. experiments, reducing implied lethality by orders of magnitude. Experiments could test this by beginning with particles that had been already abraded. Even assuming the highest lethality found in their experiments, saltation "hop" distances on Mars suggest that abrasion would not prevent ∼1% of released spores from remaining viable while traveling hundreds or even thousands of kilometers.

The most important single element of the "ground system" portion of a Mars Sample Return (MSR) Campaign is a facility referred to as the Sample Receiving Facility (SRF), which would need to be designed and equipped to receive the returned spacecraft, extract and open the sealed sample container, extract the samples from the sample tubes, and implement a set of evaluations and analyses of the samples. One of the main findings of the first MSR Sample Planning Group (MSPG, 2019a) states that "The scientific community, for reasons of scientific quality, cost, and timeliness, strongly prefers that as many sample-related investigations as possible be performed in PI-led laboratories outside containment." There are many scientific and technical reasons for this preference, including the ability to utilize advanced and customized instrumentation that may be difficult to reproduce inside in a biocontained facility, and the ability to allow multiple science investigators in different labs to perform similar or complementary analyses to confirm the reproducibility and accuracy of results. It is also reasonable to assume that there will be a desire for the SRF to be as efficient and economical as possible, while still enabling the objectives of MSR to be achieved. For these reasons, MSPG concluded, and MSPG2 agrees, that the SRF should be designed to accommodate only those analytical activities that could not reasonably be done in outside laboratories because they are time- or sterilization-sensitive, are necessary for the Sample Safety Assessment Protocol (SSAP), or are necessary parts of the initial sample characterization process that would allow subsamples to be effectively allocated for investigation. All of this must be accommodated in an SRF, while preserving the scientific value of the samples through maintenance of strict environmental and contamination control standards. Executive Summary The most important single element of the "ground system" portion of a Mars Sample Return (MSR) Campaign is a facility referred to as the Sample Receiving Facility (SRF), which would need to be designed and equipped to enable receipt of the returned spacecraft, extraction and opening of the sealed sample container, extraction of the samples from the sample tubes, and a set of evaluations and analyses of the samples-all under strict protocols of biocontainment and contamination control. Some of the important constraints in the areas of cost and required performance have not yet been set by the necessary governmental sponsors, but it is reasonable to assume there will be a desire for the SRF to be as efficient and economical as is possible, while still enabling the objectives of MSR science to be achieved. Additionally, one of the main findings of MSR Sample Planning Group (MSPG, 2019a) states "The scientific community, for reasons of scientific quality, cost, and timeliness, strongly prefers that as many sample-related investigations as possible be performed in PI-led laboratories outside containment." There are many scientific and technical reasons for this preference, including the ability to utilize advanced and customized instrumentation that may be difficult to reproduce inside a biocontained facility. Another benefit is the ability to enable similar or complementary analyses by multiple science investigators in different laboratories, which would confirm the reproducibility and accuracy of results. For these reasons, the MSPG concluded-and the MSR Science Planning Group Phase 2 (MSPG2) agrees-that the SRF should be designed to accommodate only those analytical activities inside biocontainment that could not reasonably be done in outside laboratories because such activities are time-sensitive, sterilization-sensitive, required by the Sample Safety Assessment Protocol (SSAP), or are necessary parts of the initial sample characterization process that would allow subsamples to be effectively allocated for investigation. All activities within the SRF must be done while preserving the scientific value of the samples through maintenance of strict environmental and contamination control standards. The SRF would need to provide a unique environment that consists of both Biosafety Level 4 (BSL-4) equivalent containment and a very high level of contamination control. The SRF would also need to accommodate the following activities: (1)Receipt of the returned spacecraft, presumably in a sealed shipping container (2)De-integration ( i.e., disassembly) and assessment of the returned system, beginning with the spacecraft exterior and ending with accessing and isolating all Mars material (gas, dust, regolith, and rock) (3)Initial sample characterization, leading to development of a sample catalog sufficient to support sample allocation (see Tait et al., 2022) (4)Science investigations necessary to complete the SSAP (see Kminek et al., 2021) (5)Certain science investigations that are both time- and sterilization-sensitive (see Tosca et al., 2022; Velbel et al., 2022) (6)A managed transition to post-SRF activities that would include analysis of samples (either sterilized or not) outside biocontainment and the transfer of some or all samples to one or more uncontained curation facilities The MSPG2 has produced a compilation of potential design requirements for the SRF, based on the list of activities noted above, that can be used in cost and schedule planning. The text of this report is meant to serve as an overview and explanation of these proposed SRF Design Requirements that have been compiled by the MSPG2 SRF Requirements Focus Group (Supplement 1). Summary of Findings FINDING SRF-1: The quality of the science that can be achieved with the MSR samples will be negatively impacted if they are not protected from contamination and inappropriate environmental conditions. A significant amount of SRF infrastructure would therefore be necessary to maintain and monitor appropriate levels of cleanliness, contamination control, and environmental conditions. FINDING SRF-2: Although most MSR sample investigations would take place outside of the SRF, the SRF needs to include significant laboratory capabilities with advanced instruments and associated sample preparation systems to enable the MSR science objectives to be successfully achieved. FINDING SRF-3: Preliminary studies of different operational scenarios should be started as soon as possible to enable analysis of the trade-offs between the cost and size of the SRF and the amount of time needed to prepare the samples for allocation and analysis. FINDING SRF-4: The ability to add additional analytical capabilities within biocontainment should be preserved to address the contingency scenario in which unsterilized material is not cleared to be analyzed outside of biocontainment. If potential evidence of martian life were to be detected in the samples, for example, it would be a high priority to conduct further investigations related to any putative lifeforms, as well as to enable other sterilization-sensitive science investigations to be conducted in biocontainment.

Hyperbolic metamaterials with a unique hyperbolic dispersion relation allow propagating waves with infinitely large wavevectors and a high density of states. Researchers from Korea and Singapore provide a comprehensive review of hyperbolic metamaterials, including artificially structured hyperbolic media and natural hyperbolic materials. They explain key nanophotonic concepts and describe a range of applications for these versatile materials., (© 2022. The Author(s).)

Analogous to the behavior of a common converging lens for the input of tilted waves, a recent publication suggests a new optical element with an azimuthal-quadratic phase profile for the focusing of orbital angular momentum beams at distinct angular positions. Its realization in a metasurface form enables the combined measurement of orbital and spin angular momentum using a single optical component.

Researchers in the field of whispering-gallery-mode (WGM) microresonators have proposed biointegrated low-threshold WGM lasers, to enable large-scale parallel single-cell tracking and barcoding. Although the reported devices have so far been primarily investigated in model applications, most recent results represent important steps towards the development of in vivo tags and sensors that utilize the unique and narrow spectral features of miniature WGM lasers.

Dynamic metasurfaces are endowed with self-adaptive and learning capabilities, enabling an array of important applications ranging from satellite communications to the monitoring of human health and activities., Competing Interests: Conflict of interestThe author declares no conflict of interest., (© The Author(s) 2020.)

Protein-peptide interactions play a crucial role in a variety of cellular processes. The protein-peptide complex structure is a key to understand the mechanisms underlying protein-peptide interactions and is critical for peptide therapeutic development. We present a user-friendly protein-peptide docking server, MDockPeP. Starting from a peptide sequence and a protein receptor structure, the MDockPeP Server globally docks the all-atom, flexible peptide to the protein receptor. The produced modes are then evaluated with a statistical potential-based scoring function, ITScorePeP. This method was systematically validated using the peptiDB benchmarking database. At least one near-native peptide binding mode was ranked among top 10 (or top 500) in 59% (85%) of the bound cases, and in 40.6% (71.9%) of the challenging unbound cases. The server can be used for both protein-peptide complex structure prediction and initial-stage sampling of the protein-peptide binding modes for other docking or simulation methods. MDockPeP Server is freely available at http://zougrouptoolkit.missouri.edu/mdockpep. © 2018 Wiley Periodicals, Inc., (© 2018 Wiley Periodicals, Inc.)

The standard treatment of ions in the framework of the Poisson-Boltzmann equation relies on molecular surfaces, which are commonly constructed along with the Stern layer. The molecular surface determines where ions can be present. In the Gaussian-based smooth dielectric function in DelPhi, smooth boundaries between the solute and solvent take the place of molecular surface. Therefore, this invokes the question of how to model mobile ions in the water phase without a definite solute-solvent boundary. This article reports a natural extension of the Gaussian-based smooth dielectric function approach that treats mobile ions via Boltzmann distribution with an added desolvation penalty. Thus, ion concentration near macromolecules is governed by the local electrostatic potential and the desolvation penalty (from being partially desolvated). The approach is tested against the experimental salt dependence of binding free energy on 7 protein-protein complexes and 12 DNA-protein complexes, resulting in Pearson correlations of 0.95 and 0.88, respectively. © 2017 Wiley Periodicals, Inc., (© 2017 Wiley Periodicals, Inc.)