Search

A significant share of final energy consumption in the industrial sector is used for meeting the process heating applications at low and medium temperatures (up to 250 °C). Solar industrial process heating is being considered as one of clean and renewable energy options in many countries of the world. An attempt to present a review of the available published literature on solar industrial process heating has been made in this paper. The aspects included in the review are utilization potential, present status, suitable solar collectors, design and integration aspects, performance evaluation, economic and environmental assessment, barriers to large scale adoption and case studies etc. [ABSTRACT FROM AUTHOR]

For large-scale dissemination of solar thermal power plants, in countries identified with huge potential, governments are offering various incentives. In an attempt towards studying the effectiveness of various incentives in reducing the levelised cost of electricity (LCOE) delivered by solar thermal power plants in India, this paper presents simple mathematical frameworks that facilitate the determination of the required level of an incentive so as to ensure that the LCOE is within a pre-specified limit. For example, for a 50 MW solar thermal power plant at Barmer (Rajasthan), LCOE of Rs. 9.75 per kWh can be achieved by providing 6.3% viability gap funding or an interest subsidy of 3% or provision of 32% investment tax credits to the equity investor or provision of production tax credits to the equity investor at the rate of Rs. 0.81 per kWh for first 10 years of operation of a plant. [ABSTRACT FROM AUTHOR]

A preliminary attempt to estimate the potential of solar process heating in producing cotton based textiles in India as well as the amount of greenhouse gases likely to be mitigated consequently has been made. To begin with, all the processes involved in the production of cotton based textiles (yarn and cloth) that require thermal energy have been identified. Also an assessment of availability of solar radiation as well as the ambient conditions at various locations with clusters of cotton based textile units in the country has been made. Subsequently, the solar collector area required for meeting the process heating demand has been estimated. Further, corresponding useful thermal energy delivery of solar industrial process heating systems at identified locations has been estimated. The process heating potential in term of useful thermal energy requirements in cotton based textile production is estimated at 191 PJ annually. The estimated values of annual solar fractions for the identified locations with clusters of cotton based textile units range between 0.22 and 0.32 for systems without storage and in between 0.20 and 0.60 for SIPH system having provision of thermal storage for collection of energy that would otherwise be dumped. Solar process heating in cotton based textile industry in India have a potential to mitigate 2457–7648 thousand tonnes of greenhouse gas emissions annually depending on the location and the provision of a storage component or otherwise. [ABSTRACT FROM AUTHOR]

An attempt to estimate the potential of solar industrial process heating (SIPH) and corresponding mitigation of greenhouse gas emissions in dairy industry in India is presented. An assessment of availability of solar radiation as well as of the ambient conditions at various locations with milk processing plants has been made. The effect of the choice of design value of direct normal irradiance on the annual performance of solar process heating systems has been studied using model developed for hourly simulation of the performance of solar process heating system. Further, state wise estimates for useful thermal energy delivery and corresponding solar fraction have also been obtained. The total process heating potential in term of useful energy requirement in dairy sector in India has been estimated at 6.40 PJ/annum which reduces to 4.50 PJ per annum if the process heating requirement is restricted to only pasteurization stage of milk processing. The corresponding solar collector area requirement for process heating in dairy industry in India is estimated in the range of 1.54–1.83 million m 2 with the average solar fraction estimated in the range 0.18–0.32. The use of solar energy for meeting milk processing related thermal energy demand is expected to mitigate (32–144 thousand tonnes) of CO 2 emissions annually. [ABSTRACT FROM AUTHOR]

The sizing of a solar thermal power plant directly affects its cost and also the annual electricity output and hence its financial attractiveness. It involves deciding appropriate values of design DNI, solar multiple and hours of thermal storage to achieve high annual capacity utilization factor (CUF) with the least cost of electricity delivered. An analysis of the impact of these design parameters on the performance of parabolic trough concentrator (PTC) and linear Fresnel reflector (LFR) based solar thermal power plants is presented using System Advisor Model for eight locations in India. Annual electricity output is estimated using radiation data source of SEC-NREL. Levelized unit cost of electricity (LUCE) is estimated using benchmark capital cost and other financial conditions specified by the Central Electricity Regulatory Commission of Government of India. For a design DNI of 950 W/m 2 , LUCE is minimum in solar multiple range of 1.4–1.6 for PTC based plants and of 1.8–2.0 for LFR based plants. With a solar multiple of 1.0, LUCE is minimum in design DNI range of 550–700 W/m 2 for PTC based plants and 450–550 W/m 2 for LFR based plants. [ABSTRACT FROM AUTHOR]

A simple framework to estimate the potential of solar industrial process heating (SIPH) and corresponding CO 2 emissions mitigation in paper industry in India is presented. Geographical locations with clusters of paper mills have been identified and the annual process heating requirement for paper production (based on raw material use) at each cluster has been estimated. The total process heating potential for the paper industry in India has been estimated at 25.2 PJ/annum. Using the estimated performance of a commercially available parabolic trough based SIPH system with collector area requirement of 1.11 million m 2 annual solar fraction in the range of 0.25–0.30 have been estimated. Annual energy delivery of SIPH systems estimated at 4.34 PJ per annum. Finally at 8 main locations with clusters of paper mills in India considered in this study, adoption of SIPH without storage is expected to mitigate 0.34 million tonnes of CO 2 emissions annually. [ABSTRACT FROM AUTHOR]

Realistic assessment of utilization potential of solar energy for thermal power generation and identification of niche areas/locations for this purpose is critically important for designing and implementing appropriate policies and promotional measures. This paper presents the results of a detailed analysis undertaken for estimating the potential of solar thermal power generation in India. A comprehensive framework is developed that takes into account (i) the availability of wastelands (ii) Direct Normal Irradiance (DNI) (iii) wastelands that are habitat to endangered species and/or tribal population and/or that is prone to earthquakes and (iv) suitability of wasteland for wind power generation. Finally, using an approach developed for the allocation of wastelands suitable for solar power generation between thermal and photovoltaic routes, the potential of solar thermal power generation is assessed for two threshold values of DNI – 1800 kW h/m 2 and 2000 kW h/m 2 . With all the wastelands having wind speeds of 4 m/s or more allocated for wind power generation, the estimated potential for solar thermal power generation is 756 GW for a threshold DNI value of 1800 kW h/m 2 and 229 GW for a threshold DNI value of 2000 kW h/m 2 . Results obtained can be used for identification of best suited areas for solar thermal power generation in India. [ABSTRACT FROM AUTHOR]