Search

Addressing the repair of large-scale bone defects has become a hot research topic within the field of orthopedics. This study assessed the feasibility and effectiveness of using porous tantalum scaffolds to treat such defects. These scaffolds, manufactured using the selective laser melting (SLM) technology, possessed biomechanical properties compatible with natural bone tissue. To enhance the osteogenesis bioactivity of these porous Ta scaffolds, we applied calcium phosphate (CaP) and magnesium-doped calcium phosphate (Mg-CaP) coatings to the surface of SLM Ta scaffolds through a hydrothermal method. These degradable coatings released calcium and magnesium ions, demonstrating osteogenic bioactivity. Experimental results indicated that the Mg-CaP group exhibited biocompatibility comparable to that of the Ta group in vivo and in vitro. In terms of osteogenesis, both the CaP group and the Mg-CaP group showed improved outcomes compared to the control group, with the Mg-CaP group demonstrating superior performance. Therefore, both CaP and magnesium-CaP coatings can significantly enhance the osseointegration of three-dimensional-printed porous Ta, thereby increasing the surface bioactivity. Overall, the present study introduces an innovative approach for the biofunctionalization of SLM porous Ta, aiming to enhance its suitability as a bone implant material.

The joint prosthesis plays a vital role in the outcome of total hip arthroplasty. The key factors that determine the performance of joint prostheses are the materials used and the structural design of the prosthesis. This study aimed to fabricate a porous tantalum (Ta) hip prosthesis using selective laser melting (SLM) technology. The feasibility of SLM Ta use in hip prosthesis was verified by studying its chemical composition, metallographic structure and mechanical properties. In vitroexperiments proved that SLM Ta exhibited better biological activities in promoting osteogenesis and inhibiting inflammation than SLM Ti6Al4V. Then, the topological optimization design of the femoral stem of the SLM Ta hip prosthesis was carried out by finite element simulation, and the fatigue performance of the optimized prosthesis was tested to verify the biomechanical safety of the prosthesis. A porous Ta acetabulum cup was also designed and fabricated using SLM. Its mechanical properties were then studied. Finally, clinical trials were conducted to verify the clinical efficacy of the SLM Ta hip prosthesis. The porous structure could reduce the weight of the prosthesis and stress shielding and avoid bone resorption around the prosthesis. In addition, anti-infection drugs can also be loaded into the pores for infection treatment. The acetabular cup can be custom-designed based on the severity of bone loss on the acetabular side, and the integrated acetabular cup can repair the acetabular bone defect while achieving the function of the acetabular cup.

An improved air amplifier design that takes advantage of the combined effects of aerodynamic and electrodynamic focusing was developed to couple a nanoelectrospray ionisation (nano-ESI) source and the heated mass spectrometer inlet to improve the sensitivity of a mass spectrometer. The new design comprises an electrodynamic ion funnel integrated into the main air pathway of the air amplifier to more effectively focus and transmit gas-phase ions from the nano-ESI source into the heated mass spectrometer inlet. Numerical computational fluid dynamics simulations were carried out using a commercial software package, ANSYS FLUENT, to provide more detailed information about the device's performance. The gas flow field as well as the electric field patterns and the Lagrangian ion motion were conveniently simulated using this single package and custom-written, user-defined functions. Experimental results show a nearly five-fold improvement in reserpine ion intensity with the air amplifier operated at a nitrogen gauge pressure of 40 kPa and no direct current (DC) or radiofrequency (RF) potentials applied to the ion funnel when the distance between the electrospray emitter and sampling inlet tube was 24 mm, as compared to direct sample infusion from the same distance without the air amplifier. More importantly, a nearly three-fold additional gain in ion intensity was measured when both DC and RF potentials were co-applied, resulting in more than a 13-fold overall ion intensity gain which could be attributed to the combined air amplifier aerodynamic and ion funnel electrodynamic focusing effect.