Search

This paper introduces the research on the elements that could lead to the DGS issue of Mini LED BLU, as well as a theoretical model built based on the research result. By performing a variety of experiments studying the relationship between several elements, this DGS issue was confirmed to be caused by electrochemical corrosion under the joint impact of water steam infiltrate and electric potential difference between metal pattern on the product. In this specific circumstance, the two necessary condition for DGS issue to happen are electric potential difference between 2 ndCu layer pattern in LED zone and 1 stCu layer pattern on the G‐ bus, and the water steam infiltrated from the via hole left for the LED chip soldering. The water steam infiltrated then diffuse through the 1 stResin layer and the time cost for the water steam to reach the position where electric potential difference exists is in a direct proportion to the distance from such point to the soldering via. Moreover, the larger that electric potential difference is, the higher probability of DGS issue happening is, while the relationship between this probability and the distance mentioned previously is in an opposite way. Overall, by applying several optimization such cancelling the hedgehopping 1 stCu pattern and adding extra inorganic insulating layer protection on the design of product, and applying an extra cathode protection design, the DGS issue was significantly resolved.

This article in view of the OGM adhesion faqs, Metal Peeling, open channel and so on, to explore the influence factors of adhesion, designed to improve adhesion of the metal. Through different process and different lamination process validation, design verification plan.Starting from the basic theory of adhesion, combined with the actual production process, analysis may affect the product adhesion factor: OC pickling, black Decap, fluctuation, slow down and washing, NO Mask STRIP OC0.Top Mo thinning, skip Anneal, OC, RM herculean task, SION, OC migration, etc.Comparing different Metal material, lamination, the panel position design verification. Through the adhesion test, process validation concluded that the relevant impact factors in actual production, OC pickling, alloy product USES cancel Metal2 black bottom, design verification of pure aluminium products go line area adopts GND excavated W/S below 15/15, BD area adopts single layer Metal line design.In this paper, the result is mainly used in Touch.

This paper mainly studies the influence factors and the theoretical model of OGM anti‐visibility. The factor experiment is performed by controlling the Mesh Space, the double‐layer metal reflectance difference |Rd|%, and the metal reflectivity R%. Though the research on the relationship between the factor and the level of anti‐visibility of the touch screen, Mesh Space, |Rd|%, and R% have a negative correlation with Anti visibility ability. To improve anti‐visibility ability, it is necessary to reduce Mesh Space, |Rd|% and R%. By establishing the OGM anti‐visibility theoretical model, the visibility of the human eye to the OGM metal mesh is equivalent to the human eye's ability to distinguish the smallest unit of metal mesh line. When mesh Space and |Rd|% increases, which is equivalent to the larger the resolution line distance of the mesh , it is easier for human eye to recognize metal mesh according to the Rayleigh criterion, so that the metal mesh is visible and anti‐ visibility ability decreases. When R% increases, metal reflection energy increases, and the background difference from the display module increases, making it easier to be recognized.

This paper is the first study of Metal Mesh Node corrosion. The corrosion of Metal Mesh Node were occurred during the experiment, which was used to value the stock time of OGM. Based on our research,sensor protective film cause the node corrosion can be literal. With a replace of a neutral antistatic agent, issue such as node corrosion can be addressed. The results showed that the higher PH would increase the risk of product failure. We also investigated the mechanism of node corrosion and a reaction of the metal and OH− or H+ mechanism is proposed. The OH− or H+ was separating from Sensor protective film. This research can be used for guiding the production of sensor protective film. This research also pointed that the PH of sensor protective film should be 7

Taking west Jilin Province as an example, this paper put forward the assessment index of salinization, and based on it, the authors present the distribution characteristics of saline-alkali soil in the 1980s and the 1990s in west Jilin and analyze its physical and chemical properties in detail. The developing tendency of salinization was also inferred by comparing the saline-alkali soil of the 1980s with that of the 1990s. Finally, the natural and human factors leading to salinization are analyzed.