Search

A comparison of corrosion resistance of die-cast and semi-solid cast AZ91and AM60 magnesium alloys was performed in corrosive medium by measurement of the open circuit potential and potentiodynamic scans. Before testing, a heat treatment was carried out on the semi-solid cast alloys. Moreover, electrochemical measurements were performed on the four different substrates anodized in the micro-arc regime in an environment friendly alkaline aqueous solution. The results could be correlated to the different microstructures of the samples produced by the different processes and to the different compactness/porosity of the oxides.

A comparison of corrosion resistance of die-cast and semi-solid cast AZ91, AM60 and AM50 magnesium alloys was performed in different corrosive media by measurement of the open circuit potential, potentiodynamic scans and weight loss tests. Before testing, a heat treatment was carried out onto semi-solid cast alloys. Electrochemical measurements have shown that the semi-solid cast alloys have a different corrosion rate compared to the die-cast ones. The results could be correlated to the different microstructures of the samples produced by the different processes.

Oxide films have been produced on AM60B magnesium alloy using micro-arc oxidation process in an environmentally friendly alkaline solution with and without addition of different oxides nanoparticles (TiO2, ZrO2 and Al2O3). In order to seal the oxides porosity generated in the sparking process, a silane-based top coat has been applied. The surface morphology of samples was analyzed by Scanning Electron Microscopy (SEM). Scratch tests were performed for evaluating the adhesion strength of the anodic oxides. The corrosion resistance of the oxide- silane- based topcoat composite coatings was evaluated in 3.5% NaCl solution using anodic polarization tests. The anodizing in oxides nanoparticles rich solutions (ZrO2 or Al2O3), followed by a silane top coat treatment performed using OSi as precursor, is an interesting way to synthesize adherent corrosion resistant coatings on magnesium alloy AM60B.

In this paper a protection process against corrosion and wear for AM60B magnesium alloys, by multilayer approach, is related. The coating consists of a porous oxide layer, obtained in micro-arc anodizing regime, and two or three layers deposited by sol-gel technique. The anodic oxidation pre-treatment improves the adhesion of the sol-gel layers, which are responsible for the sealing of the anodic oxide pores and for the corrosion protection effect. In addition the multilayer system significantly improves AM60B alloy wear resistance. Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD) were employed to assess morphology and crystallographic structure. Electrochemical polarization and wear tests were performed in order to evaluate the corrosion resistance behaviour and the wear resistance of the coated magnesium alloys.

Oxide films have been produced on the AM60B magnesium alloy using micro-arc oxidation process in an environmentally friendly alkaline solution with and without addition of titania nanoparticles. The surface morphology and cross-section of anodized samples were analyzed by Scanning Electron Microscopy (SEM) coupled with EDS and the phase composition was investigated by X-ray Diffraction (XRD). Hardness tests were performed by means of a micro-hardness tester and the corrosion resistance was evaluated in 3.5% NaCl solution using potentiodynamic polarization tests. Addition of titania nanoparticles doesn’t affect corrosion resistance significantly, but the oxide films produced in titania-containing solution are denser, thicker and have more uniform morphology. In the oxides produced at 130V-140V in presence of titania (4g dm-3) a spinel (MgAl2O4) was observed. Spinel phase increases the hardness up to 550 HV (10mN, 10 s). The addition of titania nanoparticles in the solution could be an interesting way to synthesize hard coatings on magnesium alloy AM60B by micro-arc oxidation in a short process time (10 minutes).