Search

The dissolution testing method described in the United States Pharmacopeia (USP) Chapter ?711? is widely used for assessing the release of active pharmaceutical ingredients from solid dosage forms. However, extensive use over the years has revealed certain issues, including high experimental intervariability observed in specific formulations and the settling of particles in the dead zone of the vessel. To address these concerns and gain a comprehensive understanding of the hydrodynamic conditions within the USP 2 apparatus, computational fluid dynamic simulations have been employed in this study. The base design employed in this study is the 900 mL USP 2 vessel along with a paddle stirrer at a 50 rpm rotational speed. Additionally, alternative stirrer designs, including the hydrofoil, pitched blade, and Rushton impeller, are investigated. A comparison is also made between a flat-bottom tank and the USP round-bottom vessel of the same volume and diameter. Furthermore, this work examines the impact of various parameters, such as clearance distance (distance between the bottom of the impeller and bottom of the vessel), number of impeller blades, impeller diameter, and impeller attachment angle. The volume-average shear rate (Stv), fluid velocity (Utv), and energy dissipation rates (?tv) represent the key properties evaluated in this study. Comparing the USP2 design and systems with the same stirrer but flat-bottom vessel reveals more homogeneous mixing compared to the USP2 design. Analyzing fluid flow streamlines in different designs demonstrates that hydrofoil stirrers generate more suspension or upward movement of fluid compared to paddle stirrers. Therefore, when impellers are of a similar size, hydrofoil designs generate higher fluid velocities in the coning area. Furthermore, the angle of blade attachment to the hub influences the fluid velocity in the coning area in a way that the 60° angle design generates more suspension than the 45° angle design. The findings indicate that the paddle stirrer design leads to a heterogeneous shear rate and velocity distributions within the vessel compared with the other designs, suggesting suboptimal performance. These insights provide valuable guidance for the development of improved in vitro dissolution testing devices, emphasizing the importance of optimized design considerations to minimize hydrodynamic variability, enhance dissolution characterization, and reduce variability in dissolution test results. Ultimately, such advancements hold potential for improving in vitro–in vivo correlations in drug development.

The prodrug mycophenolate mofetil (MMF), which is presystemically hydrolyzed into the pharmacologically active compound mycophenolic acid (MPA), has been widely used for the prophylaxis of acute allograft rejection in solid organ transplantation. However, the huge variability in the plasma concentration level makes the development of MMF drug products difficult due to the great challenge of meeting the traditional bioequivalence (BE) limits. Numerous models have been developed in the past decade to explain the variability, with the emphasis on characterizing the enterohepatic circulation. While the variability arising from systemic appearance can also contribute to the remarkable MPA variability to a great extent, it has been ignored for long for this Biopharmaceutics Classification System class 2 drug. To improve the design of the BE study for this highly variable (HV) drug, the variability of MMF pharmacokinetic (PK) profiles focusing on the absorption process was explored in a population approach. A total of 81 Chinese adult liver transplant recipients were enrolled and had their plasma concentrations of MPA and its metabolites measured by HPLC during one visit or multiple visits in a long-term MMF regimen. The population models were developed using NONMEM, and the data and the results of the model were analyzed by R. Two population PK models of MMF focusing on the absorption process were developed based on the plasma concentrations of MPA and its major metabolite 7-O-MPA-β-glucuronide (MPAG). The MPA PK profiles were best characterized by a two-compartment disposition model with zero inter-individual variability (IIV) of elimination coefficient (K20), lag time, but considerable intra-individual variability (IAV) in the form of inter-occasion variability regarding systemic appearance coefficient, K20, and central volume of distribution, when just using MPA plasma concentrations as observations. The second model took into consideration the EHC by including MPAG profiles as well. The results from both models showcased that the IAV played a far more significant role than the IIV in accounting for the variability of the MMF systemic appearance. This is in line with what was found in the BE study: the within-subject variability (WSV) of BE measures largely exceeded the corresponding between-subject variability. The great WSV of MMF can be mechanistically explained by the interplay of dissolution and solubility with the gastrointestinal (GI) physiological dynamics, especially the gastric emptying (GE) in the fasting state regulated by migrating motor complex, and GE and pH variations in the fed state by the caloric content with irregular patterns of GI motility and secretion. The results implied that for the immediate-release solid oral dosage forms of MMF, running a regular in vitrodissolution test for the fasting state and developing a predictive in vitrodissolution test with sufficient simulation of the GE dynamics and proximal small intestinal pH fluctuations for the fed state would be excellent surrogates for the in vivoBE test. Furthermore, a physiologically based predictive in vitrodissolution test under both fasting and fed conditions would be a new trend for the BE studies of all other HV drug products.

Orally dosed drugs must dissolve in the gastrointestinal (GI) tract before being absorbed through the epithelial cell membrane. In vivodrug dissolution depends on the GI tract’s physiological conditions such as pH, residence time, luminal buffers, intestinal motility, and transit and drug properties under fed and fasting conditions (Paixão, P. et al. Mol. Pharm.2018and Bermejo, et al.M. Mol. Pharm.2018). The dissolution of an ionizable drug may benefit from manipulating in vivovariables such as the environmental pH using pH-modifying agents incorporated into the dosage form. A successful example is the use of such agents for dissolution enhancement of BCS class IIb (high-permeability, low-solubility, and weak base) drugs under high gastric pH due to the disease conditions or by co-administration of acid-reducing agents (i.e., proton pump inhibitors, H2-antagonists, and antacids). This study provides a rational approach for selecting pH modifiers to improve monobasic and dibasic drug compounds’ dissolution rate and extent under high-gastric pH dissolution conditions, since the oral absorption of BCS class II drugs can be limited by either the solubility or the dissolution rate depending on the initial dose number. Betaine chloride, fumaric acid, and tartaric acid are examples of promising pH modifiers that can be included in oral dosage forms to enhance the rate and extent of monobasic and dibasic drug formulations. However, selection of a suitable pH modifier is dependent on the drug properties (e.g.,solubility and pKa) and its interplay with the pH modifier pKaor pKas. As an example of this complex interaction, for basic drugs with high pKaand intrinsic solubility values and large doses, a polyprotic pH modifier can be expected to outperform a monoacid pH modifier. We have developed a hierarchical mass transport model to predict drug dissolution of formulations under varying pH conditions including high gastric pH. This model considers the effect of physical and chemical properties of the drug and pH modifiers such as pKa, solubility, and particle size distribution. This model also considers the impact of physiological conditions such as stomach emptying rate, stomach acid and buffer secretion, residence time in the GI tract, and aqueous luminal volume on drug dissolution. The predictions from this model are directly applicable to in vitromulti-compartment dissolution vessels and are validated by in vitroexperiments in the gastrointestinal simulator. This model’s predictions can serve as a potential data source to predict plasma concentrations for formulations containing pH modifiers administered under the high-gastric pH conditions. This analysis provides an improved formulation design procedure using pH modifiers by minimizing the experimental iterations under both in vitroand in vivoconditions.

Dissolution is a crucial process for the oral delivery of drug products. Before being absorbed through epithelial cell membranes to reach the systemic circulation, drugs must first dissolve in the human gastrointestinal (GI) tract. In vivoand in vitrodissolutions are complex because of their dependency upon the drug physicochemical properties, drug product, and GI physiological properties. However, an understanding of this process is critical for the development of robust drug products. To enhance our understanding of in vivoand in vitrodissolutions, a hierarchical mass transfer (HMT) model was developed that considers the drug properties, GI fluid properties, and fluid hydrodynamics. The key drug properties include intrinsic solubility, acid/base character, pKa, particle size, and particle polydispersity. The GI fluid properties include bulk pH, buffer species concentration, fluid shear rate, and fluid convection. To corroborate the model, in vitrodissolution experiments were conducted in the United States Pharmacopeia (USP) 2 dissolution apparatus. A weakly acidic (ibuprofen), a weakly basic (haloperidol), and a nonionizable (felodipine) drug were used to study the effects of the acid/base character, pKa, and intrinsic solubility on dissolution. 900 mL of 5 mM bicarbonate and phosphate buffers at pH 6.5 and 37 °C was used to study the impact of the buffer species on drug dissolution. To investigate the impacts of fluid shear rate and convection, the apparatus was operated at different impeller rotational speeds. Moreover, presieved ibuprofen particles with different average diameters were used to investigate the effect of particle size on drug dissolution. In vitroexperiments demonstrate that the dissolution rates of both the ionizable compounds used in this study were slower in bicarbonate buffer than in phosphate buffer, with the same buffer concentration, because of the lower interfacial buffer capacity, a unique behavior of bicarbonate buffer. Therefore, using surrogates (i.e., 50 mM phosphate) for bicarbonate buffer for biorelevant in vitrodissolution testing may overestimate the in vivodissolution rate for ionizable drugs. Model simulations demonstrated that, assuming a monodisperse particle size when modeling, dissolution may overestimate the dissolution rate for polydisperse particle size distributions. The hydrodynamic parameters (maximum shear rate and fluid velocity) under in vitroconditions in the USP 2 apparatus under different rotational speeds are orders of magnitude higher compared to the in vivosituation. The inconsistencies between the in vivoand in vitrodrug dissolution hydrodynamic conditions may cause an overestimation of the dissolution rate under in vitroconditions. The in vitrodissolution data supported the accuracy of the HMT for drug dissolution. This is the first drug dissolution model that incorporates the effect of the bulk pH and buffer concentration on the interfacial drug particle solubility of ionizable compounds, combined with the medium hydrodynamics effect (diffusion, convection, shear, and confinement components), and drug particle size distribution.

Preclinical evaluation of modern oral dosage forms requires more advanced in vitro devices as the trend of selecting low solubility, high permeability compounds for commercial development continues. Current dissolution methodologies may not always be suitable for such compounds due to excessive fluid volume, high fluid shear rates, heterogeneity of shear rates, suboptimal fluid flow, and, ultimately, the lack of absorption ability (GrayThe Science of USP 1 and 2 Dissolution: Present Challenges and Future Relevance; Pharmaceutical Research, 2009; Vol. 26; pp 1289−1302). Herein, a new dissolution apparatus is introduced in combination with an ultrathin, semipermeable polymer membrane that mimics human passive absorption for lipophilic compounds. The ultrathin large-area polydimethylsiloxane (PDMS) membrane (UTLAM) absorption system is designed to mimic the dissolution and passive transcellular diffusion process representing the oral absorption pathway. A simple spin-casting method was developed to fabricate the ultrathin highly uniform membranes. To minimize membrane resistance to diffusion and maximize transport across the polymer membrane, 10–40 μm PDMS membranes were successfully prepared. A new diffusion cell was designed and tested to support the UTLAM and incorporates a hydrofoil impeller for more desirable hydrodynamics and mixing, using ibuprofen as a model weak acidic drug. UTLAM permeability was sufficiently high that the aqueous boundary layer contributed to the overall permeability of the system. This diffusion cell system demonstrated that, when the aqueous diffusion layer contributes to the overall resistance to transport, the pH at which absorption is 50% of maximum (pH50%) shifts from the pKato higher values, demonstrating why weak acid drugs can exhibit high absorption at pH’s significantly greater than their pKa. High rates of transport across the UTLAM are possible for drugs with high partition coefficients (i.e., BCS II compounds even under mostly ionized conditions), and PDMS UTLAMs may be tailored to simulate human intestinal passive absorption rates.

Prodrug discovery and development in the pharmaceutical industry have been hampered by a lack of knowledge of prodrug activation pathways. Such knowledge would minimize the risks of prodrug failure by enabling proper selection of preclinical animal models, prediction of pharmacogenomic variability, and identification of drug–drug interactions. Technologies for annotation of activating enzymes have not kept pace with the growing need. Activity-based protein profiling (ABPP) has matured considerably in recent decades, leading to widespread use in the pharmaceutical industry. Here, we report the extension of competitive ABPP (cABPP) to prodrug-activating enzyme identification in stable isotope-labeled cell lysates using a modified fluorophosphonate probe. Focusing on the antiviral ester prodrug valacyclovir (VACV), we identified serine hydrolase RBBP9 as an activating enzyme in Caco-2 cells via shotgun proteomics, validating the activity via the selective inhibitor emetine (EME). Kinetic characterization of RBBP9 revealed a catalytic efficiency (kcat·KM–1= 104 mM–1·s–1) comparable to that of BPHL, the only known VACV-activating enzyme prior to this work. EME incubation in wild-type and Bphl-knockout jejunum and liver lysates demonstrated the near-exclusivity of VACV activation by RBBP9 in the intestine. Additionally, these studies showed that RBBP9 and BPHL are the two major and coequal VACV-activating enzymes in the liver. Single-pass intestinal perfusions of VACV ± EME in mice showed EME coperfusion significantly inhibited the intestinal activation of VACV, implying the in vivorelevance of RBBP9-mediated VACV activation. We envision that others might use the cABPP approach in the future for global, rapid, and efficient discovery of prodrug-activating enzymes.

The main buffering system influencing ionizable drug dissolution in the human intestinal fluid is bicarbonate-based; however, it is rarely used in routine pharmaceutical practice due to the volatility of dissolved CO2. The typical pharmaceutical buffers used fail to capture the unique aspects of the hydration–dehydration kinetics of the bicarbonate–CO2system. In particular, CO2is involved in a reversible interconversion with carbonic acid (H2CO3), which is the actual conjugate acid of the system, as follows CO2+ H2O ⇌ H2CO3. In contrast to ionization reactions, this interconversion does not equilibrate very rapidly compared to the diffusional processes through a typical fluid diffusion boundary layer at a solid–liquid interface. In this report, a mathematical mass transport analysis was developed for ionizable drug dissolution in bicarbonate using the rules of conservation of mass and electric charge in addition to accounting for the diffusional times and reaction rate constants of the CO2–H2CO3interconversion. This model, which includes both the hydration reaction rate and dehydration reaction rate, we called the “reversible non-equilibrium” (RNE) model. The predictions made by this RNE approach for ionizable drug dissolution rates were compared to the experimental data generated by an intrinsic dissolution method for three ionizable drugs, indomethacin, ibuprofen, and haloperidol. The results demonstrate the superiority of predictions for the RNE approach compared to the predictions of a model assuming equilibrium between CO2and H2CO3, as well as models ignoring reactions. The analysis also shows that bicarbonate buffer can be viewed as having an effective pKain the boundary layer that is different from that in bulk and is hydrodynamics-dependent.

The bicarbonate buffer capacity is usually considered in a phase-homogeneous system, at equilibrium, with no CO2transfer between the liquid buffer phase and another phase. However, typically, an in vitrobicarbonate buffer-based system is a phase-heterogeneous system, as it entails continuously sparging (bubbling) the dissolution medium with CO2in a gas mixture, at constant ratio, to maintain a constant partial pressure of CO2 (g)and CO2(aq)molarity at a prescribed value, with CO2diffusing freely between the gas and the aqueous phases. The human gastrointestinal tract is also a phase-heterogeneous system, with CO2diffusing across the mucosal membrane into the mesenteric arterial blood, which serves as a sink for CO2from the intestinal lumen. In this report, a mass transport analysis of the apparent buffer capacity of a phase-heterogeneous bicarbonate–CO2system is developed. It is shown that, most significantly, a phase-heterogeneous bicarbonate–CO2system can have a much higher buffer capacity than a phase-homogeneous system such that the buffer capacity is dependent on the bicarbonate concentration. It is double that of a phase-homogeneous system at the pH = pKafor a monoprotic buffer at the same concentration. This buffer capacity enhancement increases hyperbolically with pH above the pKa, thus providing a much stronger buffering to keep the pH in the physiologically neutral range. The buffer capacity will be dependent on the bicarbonate molarity (which in vivowill depend on the bicarbonate secretion rate) and not the pH of the luminal fluid. Further, there is no conjugate acid accumulation as a result of bicarbonate neutralization, since the resulting carbonic acid (H2CO3) rapidly dehydrates producing CO2and H2O. The mass transport analysis developed in this report is further supported by in vitroexperimental results. This enhanced bicarbonate buffer capacity in a phase-heterogeneous system is of physiological significance as well as significant for the dissolution and absorption of ionizable drugs.

Exploring the intraluminal behavior of an oral drug product in the human gastrointestinal (GI) tract remains challenging. Many in vivo techniques are available to investigate the impact of GI physiology on oral drug behavior in fasting state conditions. However, little is known about the intraluminal behavior of a drug in postprandial conditions. In a previous report, we described the mean solution and total concentrations of ibuprofen after oral administration of an immediate-release (IR) tablet in fed state conditions. In parallel, blood samples were taken to assess systemic concentrations. The purpose of this work was to statistically evaluate the impact of GI physiology (e.g., pH, contractile events) within and between individuals (intra and intersubject variability) for a total of 17 healthy subjects. In addition, a pharmacokinetic (PK) analysis was performed by noncompartmental analysis, and PK parameters were correlated with underlying physiological factors (pH, time to phase III contractions postdose) and study parameters (e.g., ingested amount of calories, coadministered water). Moreover, individual plasma profiles were deconvoluted to assess the fraction absorbed as a function of time, demonstrating the link between intraluminal and systemic behavior of the drug. The results demonstrated that the in vivo dissolution of ibuprofen depends on the present gastric pH and motility events at the time of administration. Both intraluminal factors were responsible for explaining 63% of plasma Cmaxvariability among all individuals. For the first time, an in-depth analysis was performed on a large data set derived from an aspiration/motility study, quantifying the impact of physiology on systemic behavior of an orally administered drug product in fed state conditions. The data obtained from this study will help us to develop an in vitro biorelevant dissolution approach and optimize in silico tools in order to predict the in vivo performance of orally administered drug products, especially in fed state conditions.

The goal of this project was to explore and to statistically evaluate the responsible gastrointestinal (GI) factors that are significant factors in explaining the systemic exposure of ibuprofen, between and within human subjects. In a previous study, we determined the solution and total concentrations of ibuprofen as a function of time in aspirated GI fluids, after oral administration of an 800 mg IR tablet (reference standard) of ibuprofen to 20 healthy volunteers in fasted state conditions. In addition, we determined luminal pH and motility pressure recordings that were simultaneously monitored along the GI tract. Blood samples were taken to determine ibuprofen plasma levels. In this work, an in-depth statistical and pharmacokinetic analysis was performed to explain which underlying GI variables are determining the systemic concentrations of ibuprofen between (inter-) and within (intra-) subjects. In addition, the obtained plasma profiles were deconvoluted to link the fraction absorbed with the fraction dissolved. Multiple linear regressions were performed to explain and quantitatively express the impact of underlying GI physiology on systemic exposure of the drug (in terms of plasma Cmax/AUC and plasma Tmax). The exploratory analysis of the correlation between plasma Cmax/AUC and the time to the first phase III contractions postdose (TMMC-III) explains ∼40% of the variability in plasma Cmaxfor all fasted state subjects. We have experimentally shown that the in vivo intestinal dissolution of ibuprofen is dependent upon physiological variables like, in this case, pH and postdose phase III contractions. For the first time, this work presents a thorough statistical analysis explaining how the GI behavior of an ionized drug can explain the systemic exposure of the drug based on the individual profiles of participating subjects. This creates a scientifically based and rational framework that emphasizes the importance of including pH and motility in a predictive in vivo dissolution methodology to forecast the in vivo performance of a drug product. Moreover, as no extensive first-pass metabolism is considered for ibuprofen, this study demonstrates how intraluminal drug behavior is reflecting the systemic exposure of a drug.

Fasted-state gastrointestinal (GI) fluid transit is typically represented as a first-order, deterministic process (averaged and viewed as a continuous approximation). It is, however, most likely a discrete process involving fluid packets interrupted by variable time periods of little to no fluid emptying. In this report we present a physiologically based pulsed-packet gastric fluid emptying model and evaluate it with respect to recent gastrointestinal fluid volume emptying results, published gastric emptying of various dosage forms, and gastric fluid emptying as a function of GI motility. We develop the mathematical model for gastric emptying of discrete volumes emptied during intermittent pulse times of variable lengths, defined as a function of gastric motility utilizing a Poisson point process with motility-dependent intensity. We compare the simulations with observed gastric emptying results. The discrete pulse packet gastric volumetric emptying model is a more physiologically realistic mathematical model for gastric emptying, and it accounts well for the average observed emptying rates and, importantly, encompasses the variability of of observed volume and dosage form emptying rates.

The prodrug strategy has been frequently employed as a chemical approach for overcoming the disadvantages of existing parent drugs. In this report, we synthesized four monoester prodrugs of ganciclovir, an anticytomegalovirus drug, and demonstrated their potential advantages in protease-targeted activation and biopharmaceutical profiles over the parent compound. We demonstrated that these four prodrugs of ganciclovir, i.e., N-benzyloxycarbonyl-(L)-alanine-ganciclovir (CbzAlaGCV), N-benzyloxycarbonyl-(α,l)-aminobutyric acid-ganciclovir (CbzAbuGCV), N-acetyl-(l)-phenylalanine-(l)-alanine-ganciclovir (AcPheAlaGCV), and N-acetyl-(l)-phenylalanine-(α,l)-aminobutyric acid-ganciclovir (AcPheAbuGCV), are hydrolytically activated by the protease of human cytomegalovirus (hCMV), a serine protease that possesses intrinsic esterase activities. CbzAlaGCV and AcPheAlaGCV were found to be activated at a higher rate by the hCMV protease than CbzAbuGCV and AcPheAbuGCV. These ganciclovir prodrugs could potentially be targeted to selective activation by the hCMV protease which is only present at the viral infection sites, thereby achieving higher efficacy and lower systemic toxicity. The tissue stability, cellular uptake, and trans-epithelial transport of these ganciclovir prodrugs were also characterized. The N-acetylated dipeptide prodrugs of ganciclovir were found to be generally more stable than Cbz-amino acid prodrugs in various tissue matrices. Among the four prodrug candidates, AcPheAbuGCV was the most stable in human cell homogenates, plasma, and pooled liver microsomes. AcPheAbuGCV also possessed a superior cellular uptake profile and permeability across epithelial cell monolayers. Since the targeting and selective activation of a prodrug is determined by not only its rate of hydrolysis catalyzed by the hCMV protease target but also its biopharmaceutical properties, i.e., oral absorption and systemic availability, AcPheAbuGCV is considered the best overall candidate among the four ganciclovir prodrugs for further research and development for treatment of hCMV infection.

The potential use of poly(dimethylsiloxane) (PDMS) as an in vitro biomimetic analogue of the passive drug absorption process in the human gastrointestinal tract (GI) is assessed. PDMS is biomimetic because of similarities in small molecule transport, such as mechanism, ionization selectivity, lipophilicity. Nine molecular probes are used to evaluate the transport pathways and properties used to predict human oral absorption rates. The transport pathways through PDMS (bulk/pore) are analogous to transcellular (TCDT) and paracellular (PCDT) drug transport pathways. PDMS PCDT is assessed using positronium annihilation lifetime spectroscopy (PALS) and partition experiments; TCDT using diffusion and partition experiments. PALS determined that PDMS pores were uniform (D ∼ 0.85 nm), isolated, and void volume was unaffected by drug accumulation after equilibrium partitioning. Therefore, there is no PCDT or convective flow through PDMS. A strong linear correlation exists between predicted octanol–water partition coefficients and PDMS partition coefficients (LogKPDMS= 0.736 × LogPO–W– 0.971, R2= 0.981). The pH-partition hypothesis is confirmed in PDMS using ibuprofen over pH 2–12. Diffusivity through PDMS is a function of lipophilicity and polar surface area K× DPDMS= 4.46 × 10–8× e2.91×LogKPDMS(R2= 0.963) and K×DPDMS=4.61×10−6×(PSAKPDMS)−1.20(R2= 0.973). Varying the mass% of curing agent changed the lipophilicity and diffusivity (p< 0.02), but not practically (K× D= 2.23 × 10–5cm2s–1vs 2.60 × 10–5cm2s–1), and does affect elastic modulus (3.2% = 0.3 MPa to 25% = 3.2 MPa).

In vivodrug dissolution in the gastrointestinal (GI) tract is largely unmeasured. The purpose of this clinical study was to evaluate the in vivodrug dissolution and systemic absorption of the BCS class IIa drug ibuprofen under fed and fasted conditions by direct sampling of stomach and small intestinal luminal content. Expanding current knowledge of drug dissolution in vivowill help to establish physiologically relevant in vitromodels predictive of drug dissolution. A multilumen GI catheter was orally inserted into the GI tract of healthy human subjects. Subjects received a single oral dose of ibuprofen (800 mg tablet) with 250 mL of water under fasting and fed conditions. The GI catheter facilitated collection of GI fluid from the stomach, duodenum, and jejunum. Ibuprofen concentration in GI fluid supernatant and plasma was determined by LC–MS/MS. A total of 23 subjects completed the study, with 11 subjects returning for an additional study visit (a total of 34 completed study visits). The subjects were primarily white (61%) and male (65%) with an average age of 30 years. The subjects had a median [min, max] weight of 79 [52, 123] kg and body mass index of 25.7 [19.4, 37.7] kg/m2. Ibuprofen plasma levels were higher under fasted conditions and remained detectable for 28 h under both conditions. The AUC0–24and Cmaxwere lower in fed subjects vs fasted subjects, and Tmaxwas delayed in fed subjects vs fasted subjects. Ibuprofen was detected immediately after ingestion in the stomach under fasting and fed conditions until 7 h after dosing. Higher levels of ibuprofen were detected in the small intestine soon after dosing in fasted subjects compared to fed. In contrast to plasma drug concentration, overall gastric concentrations remained higher under fed conditions due to increased gastric pH vs fasting condition. The gastric pH increased to near neutrality after feedingbefore decreasing to acidic levels after 7 h. Induction of the fed state reduced systemic levels but increased gastric levels of ibuprofen, which suggest that slow gastric emptying and transit dominate the effect for plasma drug concentration. The finding of high levels of ibuprofen in stomach and small intestine 7 h post dosing was unexpected. Future work is needed to better understand the role of various GI parameters, such as motility and gastric emptying, on systemic ibuprofen levels in order to improve in vitropredictive models.

In this study, we determined the pH and buffer capacity of human gastrointestinal (GI) fluids (aspirated from the stomach, duodenum, proximal jejunum, and mid/distal jejunum) as a function of time, from 37 healthy subjects after oral administration of an 800 mg immediate-release tablet of ibuprofen (reference listed drug; RLD) under typical prescribed bioequivalence (BE) study protocol conditions in both fasted and fed states (simulated by ingestion of a liquid meal). Simultaneously, motility was continuously monitored using water-perfused manometry. The time to appearance of phase III contractions (i.e., housekeeper wave) was monitored following administration of the ibuprofen tablet. Our results clearly demonstrated the dynamic change in pH as a function of time and, most significantly, the extremely low buffer capacity along the GI tract. The buffer capacity on average was 2.26 μmol/mL/ΔpH in fasted state (range: 0.26 and 6.32 μmol/mL/ΔpH) and 2.66 μmol/mL/ΔpH in fed state (range: 0.78 and 5.98 μmol/mL/ΔpH) throughout the entire upper GI tract (stomach, duodenum, and proximal and mid/distal jejunum). The implication of this very low buffer capacity of the human GI tract is profound for the oral delivery of both acidic and basic active pharmaceutical ingredients (APIs). An in vivopredictive dissolution method would require not only a bicarbonate buffer but also, more significantly, a low buffer capacity of dissolution media to reflect in vivodissolution conditions.

The rate and extent of drug dissolution and absorption from solid oral dosage forms is highly dependent on the volume of liquid in the gastrointestinal tract (GIT). However, little is known about the time course of GIT liquid volumes after drinking a glass of water (8 oz), particularly in the colon, which is a targeted site for both locally and systemically acting drug products. Previous magnetic resonance imaging (MRI) studies offered novel insights on GIT liquid distribution in fasted humans in the stomach and small intestine, and showed that freely mobile liquid in the intestine collects in fairly distinct regions or “pockets”. Based on this previous pilot data, we hypothesized that (1) it is possible to quantify the time course of the volume and number of liquid pockets in the undisturbed colon of fasted healthy humans following ingestion of 240 mL, using noninvasive MRI methods; (2) the amount of freely mobile water in the fasted human colon is of the order of only a few milliliters. Twelve healthy volunteers fasted overnight and underwent fasted abdominal MRI scans before drinking 240 mL (∼8 fluid ounces) of water. After ingesting the water they were scanned at frequent intervals for 2 h. The images were processed to quantify freely mobile water in the total and regional colon: ascending, transverse, and descending. The fasted colon contained (mean ± SEM) 11 ± 5 pockets of resting liquid with a total volume of 2 ± 1 mL (average). The colonic fluid peaked at 7 ± 4 mL 30 min after the water drink. This peak fluid was distributed in 17 ± 7 separate liquid pockets in the colon. The regional analysis showed that pockets of free fluid were found primarily in the ascending colon. The interindividual variability was very high; the subjects showed a range of number of colonic fluid pockets from 0 to 89 and total colonic freely mobile fluid volume from 0 to 49 mL. This is the first study measuring the time course of the number, regional location, and volume of pockets of freely mobile liquid in the undisturbed colon of fasted humans after ingestion of a glass of water. Novel insights into the colonic fluid environment will be particularly relevant to improve our understanding and design of the in vivoperformance of controlled release formulations targeted to the colon. The in vivoquantitative information presented here can be input into physiologically based mechanistic models of dissolution and absorption, and can be used in the design and set up of novel in vitroperformance tools predictive of the in vivoenvironment.

Weakly basic drugs exhibit a pH-dependent dissolution profile in the gastrointestinal (GI) tract, which makes it difficult to predict their oral absorption profile. The aim of this study was to investigate the utility of the gastrointestinal simulator (GIS), a novel in vivo predictive dissolution (iPD) methodology, in predicting the in vivo behavior of the weakly basic drug dipyridamole when coupled with in silico analysis. The GIS is a multicompartmental dissolution apparatus, which represents physiological gastric emptying in the fasted state. Kinetic parameters for drug dissolution and precipitation were optimized by fitting a curve to the dissolved drug amount-time profiles in the United States Pharmacopeia apparatus II and GIS. Optimized parameters were incorporated into mathematical equations to describe the mass transport kinetics of dipyridamole in the GI tract. By using this in silico model, intraluminal drug concentration–time profile was simulated. The predicted profile of dipyridamole in the duodenal compartment adequately captured observed data. In addition, the plasma concentration–time profile was also predicted using pharmacokinetic parameters following intravenous administration. On the basis of the comparison with observed data, the in silico approach coupled with the GIS successfully predicted in vivo pharmacokinetic profiles. Although further investigations are still required to generalize, these results indicated that incorporating GIS data into mathematical equations improves the predictability of in vivo behavior of weakly basic drugs like dipyridamole.

As an orally administered, locally acting gastrointestinal drug, mesalamine products are designed to achieve high local drug concentration in the gastrointestinal (GI) tract for the treatment of ulcerative colitis. The aim of this study was to directly measure and compare drug dissolution of three mesalamine formulations in human GI tract and to correlate their GI concentration with drug concentration in plasma. Healthy human subjects were orally administered Pentasa, Apriso, or Lialda. GI fluids were aspirated from stomach, duodenum, proximal jejunum, mid jejunum, and distal jejunum regions. Mesalamine (5-ASA) and its primary metabolite acetyl-5-mesalamine (Ac-5-ASA) were measured using LC–MS/MS. GI tract pH was measured from each GI fluid sample, which averaged 1.82, 4.97, 5.67, 6.17, and 6.62 in the stomach, duodenum, proximal jejunum, middle jejunum, and distal jejunum, respectively. For Pentasa, high levels of 5-ASA in solution were observed in the stomach, duodenum, proximal jejunum, mid jejunum, and distal jejunum from 1 to 7 h. Apriso had minimal 5-ASA levels in stomach, low to medium levels of 5-ASA in duodenum and proximal jejunum from 4 to 7 h, and high levels of 5-ASA in distal jejunum from 3 to 7 h. In contrast, Lialda had minimal 5-ASA levels from stomach and early small intestine. A composite appearance rate (CAR) was calculated from the deconvolution of individual plasma concentration to reflect drug release, dissolution, transit, and absorption in the GI tract. Individuals dosed with Pentasa had high levels of CAR from 1 to 10 h; individuals dosed with Apriso had low levels of CAR from 1 to 4 h and high levels of CAR from 5 to 10 h; Lialda showed minimal levels of CAR from 0 to 5 h, then increased to medium levels from 5 to 12 h, and then decreased to further lower levels after 12 h. In the colon region, Pentasa and Apriso showed similar levels of accumulated 5-ASA excreted in the feces, while Lialda showed slightly higher 5-ASA accumulation in feces. However, all three formulations showed similar levels of metabolite Ac-5-ASA in the feces. These results provide direct measurement of drug dissolution in the GI tract, which can serve as a basis for investigation of bioequivalence for locally acting drug products.

The purpose of this work is to provide a mechanistic understanding of the dissolution behavior of cocrystals under the influence of ionization and micellar solubilization. Mass transport models were developed by applying Fick’s law of diffusion to dissolution with simultaneous chemical reactions in the hydrodynamic boundary layer adjacent to the dissolving cocrystal surface to predict the pH at the dissolving solid–liquid interface (i.e., interfacial pH) and the flux of cocrystals. To evaluate the predictive power of these models, dissolution studies of carbamazepine–saccharin (CBZ-SAC) and carbamazepine–salicylic acid (CBZ-SLC) cocrystals were performed at varied pH and surfactant concentrations above the critical stabilization concentration (CSC), where the cocrystals were thermodynamically stable. The findings in this work demonstrate that the pH dependent dissolution behavior of cocrystals with ionizable components is dependent on interfacial pH. This mass transport analysis demonstrates the importance of pH, cocrystal solubility, diffusivity, and micellar solubilization on the dissolution rates of cocrystals.

The authors present a steady-state-, particle-size-, and dose-dependent dissolution–permeation model that describes particle dissolution within the concentration boundary layer (CBL) adjacent to a semipermeable surface. It is critical to understand how particle size and dose affect the behavior of dissolving particles in the presence of a CBL adjacent to a semipermeable surface both in vivoand in vitro. Control of particle size is ubiquitous in the pharmaceutical industry; however, traditional pharmaceutical assumptions of particle dissolution typically ignore particle dissolution within the length scale of the CBL. The CBL does not physically prevent particles from traveling to the semipermeable surface (mucus, epithelial barrier, synthetic membrane, etc.), and particle dissolution can occur within the CBL thickness (δC) if the particle is sufficiently small (∼dparticle≤ δC). The total flux (the time rate transport of molecules across the membrane surface per unit area) was chosen as a surrogate parameter for measuring the additional mass generated by particles dissolving within the donor CBL. Mass transfer experiments aimed to measure the total flux of drug using an ultrathin large-area membrane diffusion cell described by Sinko et al. with a silicone-based membrane (Mol. Pharmaceutics2020, 17, (7) 2319−2328, DOI: 10.1021/acs.molpharmaceut.0c00040). Suspensions of ibuprofen, a model weak-acid drug, with three different particle-size distributions with average particle diameters of 6.6, 37.4, and 240 μm at multiple doses corresponding to a range of suspension concentrations with dimensionless dose numbers of 2.94, 14.7, 147, and 588 were used to test the model. Experimentally measured total flux across the semipermeable membrane/CBL region agreed with the predictions from the proposed model, and at a range of relatively low suspension concentrations, dependent on the average particle size, there was a measurable effect on the flux due to the difference in δCthat formed at the membrane surface. Additionally, the dose-dependent total flux across the membrane was up to 10% higher than the flux predicted by the standard Higuchi–Hiestand dissolution model where the effects of confinement were ignored as described by Wang et al. (Mol. Pharmaceutics2012, 9(5), 1052−1066, DOI: 10.1021/mp2002818).

The oral route of administration is still by far the most ubiquitous method of drug delivery. Development in this area still faces many challenges due to the complexity and inhomogeneity of the gastrointestinal environment. In particular, dosing unpredictably relative to motility phase means the gastrointestinal environment is a random variable within a defined range. Here, we present a mass balance analysis that captures this variation and highlights the effects of gastrointestinal motility, exploring what impacts it ultimately has on plasma levels and the relationship to bioequivalence for high solubility products with both high and low permeability (BCS I and III). Motility-dependent compartmental absorption and transit (MDCAT) mechanistic analysis is developed to describe the underlying fasted state cyclical motility and how the contents of the gastrointestinal tract are propelled.

Understanding the mechanistic basis of prodrug delivery and activation is critical for establishing species-specific prodrug sensitivities necessary for evaluating preclinical animal models and potential drug–drug interactions. Despite significant adoption of prodrug methodologies for enhanced pharmacokinetics, functional annotation of prodrug activating enzymes is laborious and often unaddressed. Activity-based protein profiling (ABPP) describes an emerging chemoproteomic approach to assay active site occupancy within a mechanistically similar enzyme class in native proteomes. The serine hydrolase enzyme family is broadly reactive with reporter-linked fluorophosphonates, which have shown to provide a mechanism-based covalent labeling strategy to assay the activation state and active site occupancy of cellular serine amidases, esterases, and thioesterases. Here we describe a modified ABPP approach using direct substrate competition to identify activating enzymes for an ethyl ester prodrug, the influenza neuraminidase inhibitor oseltamivir. Substrate-competitive ABPP analysis identified carboxylesterase 1 (CES1) as an oseltamivir-activating enzyme in intestinal cell homogenates. Saturating concentrations of oseltamivir lead to a four-fold reduction in the observed rate constant for CES1 inactivation by fluorophosphonates. WWL50, a reported carbamate inhibitor of mouse CES1, blocked oseltamivir hydrolysis activity in human cell homogenates, confirming CES1 is the primary prodrug activating enzyme for oseltamivir in human liver and intestinal cell lines. The related carbamate inhibitor WWL79 inhibited mouse but not human CES1, providing a series of probes for analyzing prodrug activation mechanisms in different preclinical models. Overall, we present a substrate-competitive activity-based profiling approach for broadly surveying candidate prodrug hydrolyzing enzymes and outline the kinetic parameters for activating enzyme discovery, ester prodrug design, and preclinical development of ester prodrugs.

Weakly basic drugs typically exhibit pH-dependent solubility in the physiological pH range, displaying supersaturation or precipitation along the gastrointestinal tract. Additionally, their oral bioavailabilities may be affected by coadministration of acid-reducing agents that elevate gastric pH. The purpose of this study was to assess the feasibility of a multicompartmental in vitrodissolution apparatus, Gastrointestinal Simulator (GIS), in predicting in vivodissolution of certain oral medications. In vitrodissolution studies of fluconazole, a BCS class I, and dipyridamole, a BCS class II weak bases (class IIb), were performed in the GIS as well as United States Pharmacopeia (USP) apparatus II and compared with the results of clinical drug–drug interaction (DDI) studies. In both USP apparatus II and GIS, fluconazole completely dissolved within 60 min regardless of pH, reflecting no DDI between fluconazole and acid-reducing agents in a clinical study. On the other hand, seven-fold and 15-fold higher concentrations of dipyridamole than saturation solubility were observed in the intestinal compartments in GIS with gastric pH 2.0. Precipitation of dipyridamole was also observed in the GIS, and the percentage of dipyridamole in solution was 45.2 ± 7.0%. In GIS with gastric pH 6.0, mimicking the coadministration of acid-reducing agents, the concentration of dipyridamole was equal to its saturation solubility, and the percentage of drug in solution was 9.3 ± 2.7%. These results are consistent with the clinical DDI study of dipyridamole with famotidine, which significantly reduced the Cmaxand area under the curve. An In situmouse infusion study combined with GIS revealed that high concentration of dipyridamole in the GIS enhanced oral drug absorption, which confirmed the supersaturation of dipyridamole. In conclusion, GIS was shown to be a useful apparatus to predict in vivodissolution for BCS class IIb drugs.

The purpose of this study was to evaluate minoxidil as a high permeability reference drug for Biopharmaceutics Classification System (BCS). The permeability of minoxidil was determined in in situintestinal perfusion studies in rodents and permeability studies across Caco-2 cell monolayers. The permeability of minoxidil was compared with that of metoprolol, an FDA reference drug for BCS classification. In rat perfusion studies, the permeability of minoxidil was somewhat higher than that of metoprolol in the jejunum, while minoxidil showed lower permeability than metoprolol in the ileum. The permeability of minoxidil was independent of intestinal segment, while the permeability of metoprolol was region-dependent. Similarly, in mouse perfusion study, the jejunal permeability of minoxidil was 2.5-fold higher than that of metoprolol. Minoxidil and metoprolol showed similar permeability in Caco-2 study at apical pH of 6.5 and basolateral pH of 7.4. The permeability of minoxidil was independent of pH, while metoprolol showed pH-dependent transport in Caco-2 study. Minoxidil exhibited similar permeability in the absorptive direction (AP-BL) in comparison with secretory direction (BL-AP), while metoprolol had higher efflux ratio (ER > 2) at apical pH of 6.5 and basolateral pH of 7.4. No concentration-dependent transport was observed for either minoxidil or metoprolol transport in Caco-2 study. Verapamil did not alter the transport of either compounds across Caco-2 cell monolayers. The permeability of minoxidil was independent of both pH and intestinal segment in intestinal perfusion studies and Caco-2 studies. Caco-2 studies also showed no involvement of carrier mediated transport in the absorption process of minoxidil. These results suggest that minoxidil may be an acceptable reference drug for BCS high permeability classification. However, minoxidil exhibited higher jejunal permeability than metoprolol and thus to use minoxidil as a reference drug would raise the permeability criteria for BCS high permeability classification.

The efficacy of chemotherapeutic drugs is often offset by severe side effects attributable to poor selectivity and toxicity to normal cells. Recently, the enzyme dipeptidyl peptidase IV (DPPIV) was considered as a potential target for the delivery of chemotherapeutic drugs. The purpose of this study was to investigate the feasibility of targeting chemotherapeutic drugs to DPPIV as a strategy to enhance their specificity. The expression profile of DPPIV was obtained for seven cancer cell lines using DNA microarray data from the DTP database, and was validated by RT-PCR. A prodrug was then synthesized by linking the cytotoxic drug melphalan to a proline-glycine dipeptide moiety, followed by hydrolysis studies in the seven cell lines with a standard substrate, as well as the glycyl-prolyl-melphalan (GP-Mel). Lastly, cell proliferation studies were carried out to demonstrate enzyme-dependent activation of the candidate prodrug. The relative RT-PCR expression levels of DPPIV in the cancer cell lines exhibited linear correlation with U95Av2 Affymetrix data (r2= 0.94), and with specific activity of a standard substrate, glycine-proline-p-nitroanilide (r2= 0.96). The significantly higher antiproliferative activity of GP-Mel in Caco-2 cells (GI50= 261 μM) compared to that in SK-MEL-5 cells (GI50= 807 μM) was consistent with the 9-fold higher specific activity of the prodrug in Caco-2 cells (5.14 pmol/min/μg protein) compared to SK-MEL-5 cells (0.68 pmol/min/μg protein) and with DPPIV expression levels in these cells. Our results demonstrate the great potential to exploit DPPIV as a prodrug activating enzyme for efficient chemotherapeutic drug targeting.

The rate and extent of drug dissolution and absorption from solid oral dosage forms is highly dependent upon the volumes and distribution of gastric and small intestinal water. However, little is known about the time courses and distribution of water volumes in vivoin an undisturbed gut. Previous imaging studies offered a snapshot of water distribution in fasted humans and showed that water in the small intestine is distributed in small pockets. This study aimed to quantify the volume and number of water pockets in the upper gut of fasted healthy humans following ingestion of a glass of water (240 mL, as recommended for bioavailability/bioequivalence (BA/BE) studies), using recently validated noninvasive magnetic resonance imaging (MRI) methods. Twelve healthy volunteers underwent upper and lower abdominal MRI scans before drinking 240 mL (8 fluid ounces) of water. After ingesting the water, they were scanned at intervals for 2 h. The drink volume, inclusion criteria, and fasting conditions matched the international standards for BA/BE testing in healthy volunteers. The images were processed for gastric and intestinal total water volumes and for the number and volume of separate intestinal water pockets larger than 0.5 mL. The fasted stomach contained 35 ± 7 mL (mean ± SEM) of resting water. Upon drinking, the gastric fluid rose to 242 ± 9 mL. The gastric water volume declined rapidly after that with a half emptying time (T50%) of 13 ± 1 min. The mean gastric volume returned back to baseline 45 min after the drink. The fasted small bowel contained a total volume of 43 ± 14 mL of resting water. Twelve minutes after ingestion of water, small bowel water content rose to a maximum value of 94 ± 24 mL contained within 15 ± 2 pockets of 6 ± 2 mL each. At 45 min, when the glass of water had emptied completely from the stomach, total intestinal water volume was 77 ± 15 mL distributed into 16 ± 3 pockets of 5 ± 1 mL each. MRI provided unprecedented insights into the time course, number, volume, and location of water pockets in the stomach and small intestine under conditions that represent standard BA/BE studies using validated techniques. These data add to our current understanding of gastrointestinal physiology and will help improve physiological relevance of in vitrotesting methods and in silicotransport analyses for prediction of bioperformance of oral solid dosage forms, particularly for low solubility Biopharmaceutics Classification System (BCS) Class 2 and Class 4 compounds.

Although recognized as overly conservative, metoprolol is currently the common low/high BCS permeability class boundary reference compound, while labetalol was suggested as a potential alternative. The purpose of this study was to identify the various characteristics that the optimal marker should exhibit, and to investigate the suitability of labetalol as the permeability class reference drug. Labetalol’s BCS solubility class was determined, and its physicochemical properties and intestinal permeability were thoroughly investigated, both in vitroand in vivoin rats, considering the complexity of the whole of the small intestine. Labetalol was found to be unequivocally a high-solubility compound. In the pH range throughout the small intestine (6.5–7.5), labetalol exhibited pH-dependent permeability, with higher permeability at higher pH values. While in vitrooctanol–buffer partitioning (Log D) values of labetalol were significantly higher than those of metoprolol, the opposite was evident in the in vitroPAMPA permeability assay. The results of the in vivoperfusion studies in rats lay between the two contradictory in vitrostudies; metoprolol was shown to have moderately higher rat intestinal permeability than labetalol. Theoretical distribution of the ionic species of the drugs was in corroboration with the experimental in vitroand the in vivodata. We propose three characteristics that the optimal permeability class reference drug should exhibit: (1) fraction dose absorbed in the range of 90%; (2) the optimal marker drug should be absorbed largely via passive transcellular permeability, with no/negligible carrier-mediated active intestinal transport (influx or efflux); and (3) the optimal marker drug should preferably be nonionizable. The data presented in this paper demonstrate that neither metoprolol nor labetalol can be regarded as optimal low/high-permeability class boundary standard. While metoprolol is too conservative due to its complete absorption, labetalol has been shown to be a substrate for P-gp-mediated efflux transport, and both drugs exhibit significant segmental-dependent permeability along the gastrointestinal tract. Nevertheless, the use of metoprolol as the marker compound does not carry a risk of bioinequivalence: Peffvalue similar to or higher than metoprolol safely indicates high-permeability classification. On the other hand, a more careful data analysis is needed if labetalol is used as the reference compound.

In the current study the involvement of ion pair formation between bile salts and trospium chloride (TC), a positively charged Biopharmaceutical Classification System (BCS) class III substance, showing a decrease in bioavailability upon coadministration with food (negative food effect) was investigated. Isothermal titration calorimetry provided evidence of a reaction between TC and bile acids. An effect of ion pair formation on the apparent partition coefficient (APC) was examined using 3H-trospium. The addition of bovine bile and bile extract porcine led to a significant increase of the APC. In vitro permeability studies of trospium were performed across Caco-2-monolayers and excised segments of rat jejunum in a modified Ussing chamber. The addition of bile acids led to an increase of trospium permeation across Caco-2-monolayers and rat excised segments by approximately a factor of 1.5. The addition of glycochenodeoxycholate (GCDC) was less effective than taurodeoxycholate (TDOC). In the presence of an olive oil emulsion, a complete extinction of the permeation increasing effects of bile salts was observed. Thus, although there are more bile acids in the intestine in the fed state compared to the fasted state, these are not able to form ion pairs with trospium in fed state, because they are involved in the emulsification of dietary fats. In conclusion, the formation of ion pairs between trospium and bile acids can partially explain its negative food effect. Our results are presumably transferable to other organic cations showing a negative food effect.

BCS classification is a vital tool in the development of both generic and innovative drug products. The purpose of this work was to provisionally classify the world’s top selling oral drugs according to the BCS, using in silico methods. Three different in silico methods were examined: the well-established group contribution (CLogP) and atom contribution (ALogP) methods, and a new method based solely on the molecular formula and element contribution (KLogP). Metoprolol was used as the benchmark for the low/high permeability class boundary. Solubility was estimated in silico using a thermodynamic equation that relies on the partition coefficient and melting point. The validity of each method was affirmed by comparison to reference data and literature. We then used each method to provisionally classify the orally administered, IR drug products found in the WHO Model list of Essential Medicines, and the top-selling oral drug products in the United States (US), Great Britain (GB), Spain (ES), Israel (IL), Japan (JP), and South Korea (KR). A combined list of 363 drugs was compiled from the various lists, and 257 drugs were classified using the different in silico permeability methods and literature solubility data, as well as BDDCS classification. Lastly, we calculated the solubility values for 185 drugs from the combined set using in silico approach. Permeability classification with the different in silico methods was correct for 69–72.4% of the 29 reference drugs with known human jejunal permeability, and for 84.6–92.9% of the 14 FDA reference drugs in the set. The correlations (r2) between experimental log Pvalues of 154 drugs and their CLogP, ALogP and KLogP were 0.97, 0.82 and 0.71, respectively. The different in silico permeability methods produced comparable results: 30–34% of the US, GB, ES and IL top selling drugs were class 1, 27–36.4% were class 2, 22–25.5% were class 3, and 5.46–14% were class 4 drugs, while ∼8% could not be classified. The WHO list included significantly less class 1 and more class 3 drugs in comparison to the countries’ lists, probably due to differences in commonly used drugs in developing vs industrial countries. BDDCS classified more drugs as class 1 compared to in silico BCS, likely due to the more lax benchmark for metabolism (70%), in comparison to the strict permeability benchmark (metoprolol). For 185 out of the 363 drugs, in silico solubility values were calculated, and successfully matched the literature solubility data. In conclusion, relatively simple in silico methods can be used to estimate both permeability and solubility. While CLogP produced the best correlation to experimental values, even KLogP, the most simplified in silico method that is based on molecular formula with no knowledge of molecular structure, produced comparable BCS classification to the sophisticated methods. This KLogP, when combined with a mean melting point and estimated dose, can be used to provisionally classify potential drugs from just molecular formula, even before synthesis. 49–59% of the world’s top-selling drugs are highly soluble (class 1 and class 3), and are therefore candidates for waivers of in vivo bioequivalence studies. For these drugs, the replacement of expensive human studies with affordable in vitro dissolution tests would ensure their bioequivalence, and encourage the development and availability of generic drug products in both industrial and developing countries.

Much interest has been expressed in this work on the role of water diffusivity in the release media as a new parameter for predicting drug release. NMR was used to measure water diffusivity in different media varying in their osmolality and viscosity. Water self-diffusion coefficients in sucrose, sodium chloride, and polymeric hydroxypropyl methylcellulose (HPMC) solutions were correlated with water uptake, disintegration, and drug release rates from trospium chloride immediate release tablets. The water diffusivity in sucrose solutions was significantly reduced compared to polymeric HPMC and molecular sodium chloride solutions. Water diffusivity was found to be a function of sucrose concentration in the media. Dosage form disintegration and drug release was to be affected by water diffusivity in these systems. This observation can be explained by hydrogen bonding formation between sugar molecules, an effect which was not expressed in sodium chloride solutions of equal osmolality. Water diffusivity and not media osmolality in general need to be considered to predict the effect of disintegration and dissolution media on drug release. Understanding the relevance of water diffusivity for disintegration and dissolution will lead to better parametrization of dosage form behavior in gastrointestinal (GI) aqueous and semisolid media.

The Biopharmaceutical Classification System (BCS), which is a scientific approach to categorize active drug ingredient based on its solubility and intestinal permeability into one of the four classes, has been used to set the pharmaceutical quality standards for drug products in western society. However, it has received little attention in the area of Chinese herbal medicine (CHM). This is likely, in part, due to the presence of multiple active components as well as lack of standardization of CHM. In this report, we apply BCS classification to CHMs provisionally as a basis for establishing improved in vitroquality standards. Based on a top-200 drugs selling list in China, a total of 31 CHM products comprising 50 official active marker compounds (AMCs) were provisionally classified according to BCS. Information on AMC content and doses of these CHM products were retrieved from the Chinese Pharmacopoeia. BCS parameters including solubility and permeability of the AMCs were predicted in silico(ACD/Laboratories). A BCS classification of CHMs according to biopharmaceutical properties of their AMCs is demonstrated to be feasible in the current study and can be used to provide a minimum set of quality standards. Our provisional results showed that 44% of the included AMCs were classified as Class III (high solubility, low permeability), followed by Class II (26%), Class I (18%), and Class IV (12%). A similar trend was observed when CHMs were classified in accordance with the BCS class of AMCs. Most (45%) of the included CHMs were classified as Class III, followed by Class II (16%), Class I (10%), and Class IV (6%); whereas 23% of the CHMs were of mixed class due to the presence of multiple individual AMCs with different BCS classifications. Moreover, about 60% of the AMCs were classified as high-solubility compounds (Class I and Class III), suggesting an important role for an in vitrodissolution test in setting quality control standards ensuring consistent biopharmaceutical quality for the commercially available CHM products. That is, provisionally, more than half of the AMCs of the top-selling CHMs included in this study would be candidates for a bioequivalence (BE) biowaiver, based on WHO recommendations and EMEA guidelines. Thus a dissolution requirement on these AMCs would represent a significant advance in the pharmaceutical quality of CHM today.

Human cytomegalovirus (HCMV) is a prevalent virus that infects up to 90% of the population. The goal of this research is to determine if small molecular prodrug substrates can be developed for a specific HCMV encoded protease and thus achieve site-specific activation. HCMV encodes a 256 amino acid serine protease that is responsible for capsid assembly, an essential process for herpes virus production. The esterase activity of the more stable HCMV A143T/A144T protease mutant was evaluated with model p-nitrophenol (ONp) esters, Boc-Xaa-ONp (Ala, Leu, Ile, Val, Gln, Phe at the Xaa position). We demonstrate that the A143T/A144T mutant has esterase activity toward specific small ester compounds, e.g., Boc-l-Ala-ONp. Mono amino acid and dipeptide prodrugs of ganciclovir (GCV) were also synthesized and evaluated for hydrolysis by the A143T/A144T protease mutant in solution. Hydrolysis of these prodrugs was also evaluated in Caco-2 cell homogenates, human liver microsomes (HLMs), and rat and human plasma. For the selectivity potential of the prodrugs, the hydrolysis ratio was evaluated as a percentage of prodrug hydrolyzed by the HCMV protease over the percentages of prodrug hydrolyses by Caco-2 cell homogenates, HLMs, and human/rat plasma. A dipeptide prodrug of ganciclovir, Ac-l-Gln-l-Ala-GCV, emerged as a potential selective prodrug candidate. The results of this research demonstrate that targeting prodrugs for activation by a specific protease encoded by the infectious HCMV pathogen may be achievable.

The purpose of this study was to investigate labetalol as a potential high permeability reference standard for the application of Biopharmaceutics Classification Systems (BCS). Permeabilities of labetalol and metoprolol were investigated in animal intestinal perfusion models and Caco-2 cell monolayers. After isolating specific intestinal segments, in situsingle-pass intestinal perfusions (SPIP) were performed in rats and mice. The effective permeabilities (Peff) of labetalol and metoprolol, an FDA standard for the low/high Peffclass boundary, were investigated in two different segments of rat intestine (proximal jejunum and distal ileum) and in the proximal jejunum of mouse. No significant difference was found between Peffof metoprolol and labetalol in the jejunum and ileum of rat (0.33 ± 0.11 × 10–4vs 0.38 ± 0.06 × 10–4and 0.57 ± 0.17 × 10–4vs 0.64 ± 0.30 × 10–4cm/s, respectively) and in the jejunum of mouse (0.55 ± 0.05 × 10–4vs 0.59 ± 0.13 × 10–4cm/s). However, Peffof metoprolol and labetalol were 1.7 and 1.6 times higher in the jejunum of mouse, compared to the jejunum of rat, respectively. Metoprolol and labetalol showed segmental-dependent permeability through the rat intestine, with increased Peffin the distal ileum in comparison to the proximal jejunum. Most significantly, Peffof labetalol was found to be concentration-dependent. Decreasing concentrations of labetalol in the perfusate resulted in decreased Peffcompared to Peffof metoprolol. The intestinal epithelial permeability of labetalol was lower than that of metoprolol in Caco-2 cells at both apical pH 6.5 and 7.5 (5.96 ± 1.96 × 10–6vs 9.44 ± 3.44 × 10–6and 15.9 ± 2.2 × 10–6vs 23.2 ± 7.1 × 10–6cm/s, respectively). Labetalol exhibited higher permeability in basolateral to apical (BL-AP) compared to AP-BL direction in Caco-2 cells at 0.1 times the highest dose strength (HDS) (46.7 ± 6.5 × 10–6vs 14.2 ± 1.5 × 10–6cm/s). The P-gp inhibitor, verapamil, significantly increased AP-BL and decreased BL-AP direction transport of labetalol. Overall, labetalol showed high Peffin rat and mouse intestinal perfusion models similar to metoprolol at a concentration based on HDS. However, the concentration-dependent permeability of labetalol in mice due to P-gp and the inhibition study with verapamil in Caco-2 cells indicated that labetalol is not an ideal reference standard for BCS classification.

Poor oral absorption is one of the limiting factors in utilizing the full potential of polar antiviral agents. The neuraminidase target site requires a polar chemical structure for high affinity binding, thus limiting oral efficacy of many high affinity ligands. The aim of this study was to overcome this poor oral absorption barrier, utilizing prodrug to target the apical brush border peptide transporter 1 (PEPT1). Guanidine oseltamivir carboxylate (GOCarb) is a highly active polar antiviral agent with insufficient oral bioavailability (4%) to be an effective therapeutic agent. In this report we utilize a carrier-mediated targeted prodrug approach to improve the oral absorption of GOCarb. Acyloxy(alkyl) ester based amino acid linked prodrugs were synthesized and evaluated as potential substrates of mucosal transporters, e.g., PEPT1. Prodrugs were also evaluated for their chemical and enzymatic stability. PEPT1 transport studies included [3H]Gly-Sar uptake inhibition in Caco-2 cells and cellular uptake experiments using HeLa cells overexpressing PEPT1. The intestinal membrane permeabilities of the selected prodrugs and the parent drug were then evaluated for epithelial cell transport across Caco-2 monolayers, and in the in siturat intestinal jejunal perfusion model. Prodrugs exhibited a pH dependent stability with higher stability at acidic pHs. Significant inhibition of uptake (IC50<1 mM) was observed for l-valyl and l-isoleucyl amino acid prodrugs in competition experiments with [3H]Gly-Sar, indicating a 3–6 times higher affinity for PEPT1 compared to valacyclovir, a well-known PEPT1 substrate and >30-fold increase in affinity compared to GOCarb. The l-valyl prodrug exhibited significant enhancement of uptake in PEPT1/HeLa cells and compared favorably with the well-absorbed valacyclovir. Transepithelial permeability across Caco-2 monolayers showed that these amino acid prodrugs have a 2–5-fold increase in permeability as compared to the parent drug and showed that the l-valyl prodrug (Papp= 1.7 × 10–6cm/s) has the potential to be rapidly transported across the epithelial cell apical membrane. Significantly, only the parent drug (GOCarb) appeared in the basolateral compartment, indicating complete activation (hydrolysis) during transport. Intestinal rat jejunal permeability studies showed that l-valyl and l-isoleucyl prodrugs are highly permeable compared to the orally well absorbed metoprolol, while the parent drug had essentially zero permeability in the jejunum, consistent with its known poor low absorption. Prodrugs were rapidly converted to parent in cell homogenates, suggesting their ability to be activated endogenously in the epithelial cell, consistent with the transport studies. Additionally, l-valyl prodrug was found to be a substrate for valacyclovirase (Km= 2.37 mM), suggesting a potential cell activation mechanism. Finally we determined the oral bioavailability of our most promising candidate, GOC-l-Val, in mice to be 23% under fed conditions and 48% under fasted conditions. In conclusion, GOC-l-Val prodrug was found to be a very promising antiviral agent for oral delivery. These findings indicate that the carrier-mediated prodrug approach is an excellent strategy for improving oral absorption of polar neuraminidase inhibitors. These promising results demonstrate that the oral peptide transporter-mediated prodrug strategy has enormous promise for improving the oral mucosal cell membrane permeability of polar, poorly absorbed antiviral agents and treating influenza via the oral route of administration.

The drug intestinal permeability (Peff) measure has been widely used as one of the main factors governing both the rate and/or extent of drug absorption (Fabs) in humans following oral administration. In this communication we emphasize the complexity behind and the care that must be taken with this in vivo Peffmeasurement. Intestinal permeability, considering the whole of the human intestine, is more complex than generally recognized, and this can lead to misjudgment regarding Fabsand Peffin various settings, e.g. drug discovery, formulation design, drug development and regulation. Setting the adequate standard for the low/high permeability class boundary, the different experimental methods for the permeability measurement, and segmental-dependent permeability throughout the human intestine due to different mechanisms are some of the main points that are discussed. Overall, the use of jejunal Peffas a surrogate for extent of absorption is sound and scientifically justified; a compound with high jejunal Peffwill have high Fabs, eliminating the risk for misclassification as a BCS class I drug. Much more care should be taken, however, when jejunal Peffdoes not support a high-permeability classification; a thorough examination may reveal high-permeability after all, attributable to e.g. segmental-dependent permeability due to degree of ionization or transporter expression. In this situation, the use of multiple permeability experimental methods, including the use of metabolism, which except for luminal degradation requires absorption, is prudent and encouraged.

The aim of this study was to classify some markers of common herbs used in Western medicine according to the Biopharmaceutical Classification System (BCS). The BCS is a scientific approach to classify drug substances based upon their intestinal permeability and their solubility, at the highest single dose used, within the physiologically relevant pH ranges. Known marker components of twelve herbs were chosen from the USP Dietary Supplement Compendium Monographs. Different BCS parameters such as intestinal permeability (Peff) and solubility (Cs) were predicted using the ADMET Predictor,which is a software program to estimate biopharmaceutical relevant molecular descriptors. The dose number (D0) was calculated when information from the literature was available to identify an upper dose for individual markers. In these cases the herbs were classified according to the traditional BCS parameters using Peffand D0. When no upper dose could be determined, then the amount of a marker that is just soluble in 250 mL of water was calculated. This value, Mx, defines when a marker is changing from highly soluble to poorly soluble according to BCS criteria. This biopharmaceutically relevant value can be a useful tool for marker selection. The present study showed that a provisional BCS classification of herbs is possible but some special considerations need to be included into the classification strategy. The BCS classification can be used to choose appropriate quality control tests for products containing these markers. A provisional BCS classification of twelve common herbs and their 35 marker compounds is presented.

The purpose of this study was to improve the membrane permeability and oral absorption of the poorly permeable anti-influenza agent, zanamivir. The poor oral bioavailability is attributed to the high polarity (cLogP ∼ −5) resulting from the polar and zwitterionic nature of zanamivir. In order to improve the permeability of zanamivir, prodrugs with amino acids were developed to target the intestinal membrane transporter, hPepT1. Several acyloxy ester prodrugs of zanamivir conjugated with amino acids were synthesized and characterized. The prodrugs were evaluated for their chemical stability in buffers at various pHs and for their transport and tissue activation by enzymes. The acyloxy ester prodrugs of zanamivir were shown to competitively inhibit [3H]Gly-Sar uptake in Caco-2 cells (IC50: 1.19 ± 0.33 mM for l-valyl prodrug of zanamivir). The l-valyl prodrug of zanamivir exhibited ∼3-fold higher uptake in transfected HeLa/hPepT1 cells compared to wild type HeLa cells, suggesting, at least in part, carrier mediated transport by the hPepT1 transporter. Further, enhanced transcellular permeability of prodrugs across Caco-2 monolayer compared to the parent drug (Papp= 2.24 × 10–6± 1.33 × 10–7cm/s for l-valyl prodrug of zanamivir), with only parent zanamivir appearing in the receiver compartment, indicates that the prodrugs exhibited both enhanced transport and activation in intestinal mucosal cells. Most significantly, several of these prodrugs exhibited high intestinal jejunal membrane permeability, similar to metoprolol, in the in siturat intestinal perfusion system, a system highly correlated with human jejunal permeability. In summary, this mechanistic targeted prodrug strategy, to enhance oral absorption via intestinal membrane carriers such as hPepT1, followed by activation to parent drug (active pharmaceutical ingredient or API) in the mucosal cell, significantly improves the intestinal epithelial cell permeability of zanamivir and has the potential to provide the high oral bioavailability necessary for oral zanamivir therapy.

Surfactants are routinely employed to increase the apparent aqueous solubility of poorly soluble drugs. Yet the impact of micellar solubilization on the intestinal membrane permeability of a lipophilic drug is often overlooked and poorly understood. In this work, the interplay between the apparent solubility increase and intestinal membrane permeability decrease that exists when surfactants are used as drug solubility enhancers is described. A quasi-equilibrium mechanistic mass transport analysis was developed and employed to describe the effect of micellar solubilization by sodium taurocholate (STC) and sodium lauryl sulfate (SLS) on the intestinal membrane permeability of the lipophilic drug progesterone. The model considers the effects of micellar solubilization on both the membrane permeability (Pm) and the unstirred water layer (UWL) permeability (Paq), to predict the overall effective permeability (Peff) dependence on surfactant concentration (CS). The analysis reveals that (1) the effective UWL thickness (haq) quickly decreases with increasing CSabove the critical micelle concentration (CMC), such that Paqmarkedly increases with increasing CS; (2) the free fraction of drug available for membrane permeation decreases with increasing CSabove CMC, such that Pmdecreases with increasing CS; and (3) Paqincreases and Pmdecreases with increasing CSabove CMC, consequently the UWL is effectively shorted out and the overall Pefftends toward membrane control with increasing CS. The model enabled excellent quantitative prediction of the progesterone Peffas a function of CSin the rat jejunal perfusion model. This work demonstrates that a trade-off exists between micellar apparent solubility increase and permeability decrease that must be taken into account to strike the optimal solubility–permeability balance. The model presented in this work offers the formulation scientist a simple method for a prioriprediction of this interplay, in order to maximize the overall oral absorption.

Introduction:Guanidino-containing compounds are well-known for their important biological roles in vivo.In a rational drug design process, the guanidino group is frequently adopted to mimic the arginine residue of the endogenous substrate and secure the affinity of the drug to the target. However, due to their inherent polarity and positive charge in the gastrointestinal tract, it is difficult for guanidino-containing compounds to be orally absorbed by passive diffusion. Hence, guanidino-containing compounds are frequently associated with low oral bioavailability.Areas covered:In this review, we present the barriers and challenges toward the oral absorption of guanidino-containing compounds, provide an overview of the research that has been done so far in the area, and summarize recent advances and future directions in the mechanistic enhancement of the intestinal absorption of drugs containing the polar guanidino functionality. For instance, application of several different prodrug approaches, a novel recently developed ion-pairing strategy and the utilization of advanced formulations are discussed.Expert opinion:While additional research is required to allow efficient and facile solutions to low oral bioavailability of guanidino-containing compounds, novel and exciting strategies have been developed in recent years. Although challenging, the development of a potent guanidino-containing compound into an orally administered drug is becoming an achievable target.

Human valacyclovirase (hVACVase) is a prodrug-activating enzyme for amino acid prodrugs including the antiviral drugs valacyclovir and valganciclovir. In hVACVase-catalyzed reactions, the leaving group of the substrate corresponds to the drug moiety of the prodrug, making the leaving group effect essential for the rational design of new prodrugs targeting hVACVase activation. In this study, a series of valine esters, phenylalanine esters, and a valine amide were characterized for the effect of the leaving group on the efficiency of hVACVase-mediated prodrug activation. Except for phenylalanine methyl and ethyl esters, all of the ester substrates exhibited a relatively high specificity constant (kcat/Km), ranging from 850 to 9490 mM−1·s−1. The valine amide Val-3-APG exhibited significantly higher Kmand lower kcatvalues compared to the corresponding ester Val-3-HPG, indicating poor specificity for hVACVase. In conclusion, the substrate leaving group has been shown to affect both binding and specific activity of hVACVase-catalyzed activation. It is proposed that hVACVase is an ideal target for α-amino acid ester prodrugs with relatively labile leaving groups while it is relatively inactivate toward amide prodrugs.

Pharmaceutical solid oral dosage forms must undergo dissolution in the intestinal fluids of the gastrointestinal tract before they can be absorbed and reach the systemic circulation. Therefore, dissolution is a critical part of the drug-delivery process. The rate and extent of drug dissolution and absorption depend on the characteristics of the active ingredient as well as properties of the dosage form. Just as importantly, characteristics of the physiological environment such as buffer species, pH, bile salts, gastric emptying rate, intestinal motility, and hydrodynamics can significantly impact dissolution and absorption. While significant progress has been made since 1970 when the first compendial dissolution test was introduced (USP apparatus 1), current dissolution testing does not take full advantage of the extensive physiologic information that is available. For quality control purposes, where the question is one of lot-to-lot consistency in performance, using nonphysiologic test conditions that match drug and dosage form properties with practical dissolution media and apparatus may be appropriate. However, where in vitro−in vivocorrelations are desired, it is logical to consider and utilize knowledge of the in vivocondition. This publication critically reviews the literature that is relevant to oral human drug delivery. Physiologically relevant information must serve as a basis for the design of dissolution test methods and systems that are more representative of the human condition. As in vitromethods advance in their physiological relevance, better in vitro−in vivocorrelations will be possible. This will, in turn, lead to in vitrosystems that can be utilized to more effectively design dosage forms that have improved and more consistent oral bioperformance.

The FDA classifies a drug substance as high-permeability when the fraction of dose absorbed (Fabs) in humans is 90% or higher. This direct correlation between human permeability and Fabshas been recently controversial, since the β-blocker sotalol showed high Fabs(90%) and low Caco-2 permeability. The purpose of this study was to investigate the scientific basis for this disparity between permeability and Fabs. The effective permeabilities (Peff) of sotalol and metoprolol, a FDA standard for the low/high Peffclass boundary, were investigated in the rat perfusion model, in three different intestinal segments with pHs corresponding to the physiological pH in each region: (1) proximal jejunum, pH 6.5; (2) mid small intestine, pH 7.0; and (3) distal ileum, pH 7.5. Both metoprolol and sotalol showed pH-dependent permeability, with higher Peffat higher pH. At any given pH, sotalol showed lower permeability than metoprolol; however, the permeability of sotalol determined at pH 7.5 exceeded/matched metoprolol’s at pH 6.5 and 7.0, respectively. Physicochemical analysis based on ionization, pKaand partitioning of these drugs predicted the same trend and clarified the mechanism behind these observed results. Experimental octanol−buffer partitioning experiments confirmed the theoretical curves. An oral dose of metoprolol has been reported to be completely absorbed in the upper small intestine; it follows, hence, that metoprolol’s Peffvalue at pH 7.5 is not likely physiologically relevant for an immediate release dosage form, and the permeability at pH 6.5 represents the actual relevant value for the low/high permeability class boundary. Although sotalol’s permeability is low at pH 6.5 and 7.0, at pH 7.5 it exceeds/matches the threshold of metoprolol at pH 6.5 and 7.0, most likely responsible for its high Fabs. In conclusion, we have shown that, in fact, there is no discrepancy between Peffand Fabsin sotalol’s absorption; the data emphasize that, if a compound has high fraction of dose absorbed, it will have high-permeability, not necessarily in the jejunum, but at some point along the relevant intestinal regions.

The Biopharmaceutical Classification System (BCS) guidance issued by the FDA allows waivers for in vivobioavailability and bioequivalence studies for immediate-release (IR) solid oral dosage forms only for BCS class I drugs. However, a number of drugs within BCS class III have been proposed to be eligible for biowaivers. The World Health Organization (WHO) has shortened the requisite dissolution time of BCS class III drugs on their Essential Medicine List (EML) from 30 to 15 min for extended biowaivers; however, the impact of the shorter dissolution time on AUC0−infand Cmaxis unknown. The objectives of this investigation were to assess the ability of gastrointestinal simulation software to predict the oral absorption of the BCS class I drugs propranolol and metoprolol and the BCS class III drugs cimetidine, atenolol, and amoxicillin, and to perform in silicobioequivalence studies to assess the feasibility of extending biowaivers to BCS class III drugs. The drug absorption from the gastrointestinal tract was predicted using physicochemical and pharmacokinetic properties of test drugs provided by GastroPlus (version 6.0). Virtual trials with a 200 mL dose volume at different drug release rates (T85%= 15 to 180 min) were performed to predict the oral absorption (Cmaxand AUC0−inf) of the above drugs. Both BCS class I drugs satisfied bioequivalence with regard to the release rates up to 120 min. The results with BCS class III drugs demonstrated bioequivalence using the prolonged release rate, T85%= 45 or 60 min, indicating that the dissolution standard for bioequivalence is dependent on the intestinal membrane permeability and permeability profile throughout the gastrointestinal tract. The results of GastroPlus simulations indicate that the dissolution rate of BCS class III drugs could be prolonged to the point where dissolution, rather than permeability, would control the overall absorption. For BCS class III drugs with intestinal absorption patterns similar to those of cimetidine, atenolol or amoxicillin, the dissolution criteria for extension of biowaivers to BCS class III drugs warrants further investigation.

Antiviral drugs often suffer from poor intestinal permeability, preventing their delivery via the oral route. The goal of this work was to enhance the intestinal absorption of the low-permeability antiviral agents zanamivir heptyl ester (ZHE) and guanidino oseltamivir (GO) utilizing an ion-pairing approach, as a critical step toward making them oral drugs. The counterion 1-hydroxy-2-naphthoic acid (HNAP) was utilized to enhance the lipophilicity and permeability of the highly polar drugs. HNAP substantially increased the log Pof the drugs by up to 3.7 log units. Binding constants (K11aq) of 388 M−1for ZHE−HNAP and 2.91 M−1for GO−HNAP were obtained by applying a quasi-equilibrium transport model to double-reciprocal plots of apparent octanol−buffer distribution coefficients versus HNAP concentration. HNAP enhanced the apparent permeability (Papp) of both compounds across Caco-2 cell monolayers in a concentration-dependent manner, as substantial Papp(0.8−3.0 × 10−6cm/s) was observed in the presence of 6−24 mM HNAP, whereas no detectable transport was observed without counterion. Consistent with a quasi-equilibrium transport model, a linear relationship with slope near 1 was obtained from a log−log plot of Caco-2 Pappversus HNAP concentration, supporting the ion-pair mechanism behind the permeability enhancement. In the rat jejunal perfusion assay, the addition of HNAP failed to increase the effective permeability (Peff) of GO. However, the rat jejunal permeability of ZHE was significantly enhanced by the addition of HNAP in a concentration-dependent manner, from essentially zero without HNAP to 4.0 × 10−5cm/s with 10 mM HNAP, matching the Peffof the high-permeability standard metoprolol. The success of ZHE−HNAP was explained by its >100-fold stronger K11aqversus GO−HNAP, making ZHE−HNAP less prone to dissociation and ion-exchange with competing endogenous anions and able to remain intact during membrane permeation. Overall, this work presents a novel approach to enable the oral delivery of highly polar antiviral drugs, and provides new insights into the underlying mechanisms governing the success or failure of the ion-pairing strategy to increase oral absorption.

We evaluated the chemical and enzymatic stabilities of prodrugs containing methoxy, ethoxy and propylene glycol linkers in order to find a suitable linker for prodrugs of carboxylic acids with amino acids. l-Valine and l-phenylalanine prodrugs of model compounds (benzoic acid and phenyl acetic acid) containing methoxy, ethoxy and propylene glycol linkers were synthesized. The hydrolysis rate profile of each compound was studied at physiologically relevant pHs (1.2, 4, 6 and 7.4). Enzymatic hydrolysis of propylene glycol containing compounds was studied using Caco-2 homogenate as well as purified enzyme valacyclovirase. It was observed that the stability of the prodrugs increases with the linker length (propyl > ethyl > methyl). The model prodrugs were stable at acidic pH as compared to basic pH. It was observed that the prodrug with the aliphatic amino acid promoiety was more stable compared to its aromatic counterpart. The comparison between benzyl and the phenyl model compounds revealed that the amino acid side chain is significant in determining the stability of the prodrug whereas the benzyl or phenyl carboxylic acid had little or no effect on the stability. The enzymatic activation studies of propylene glycol linker prodrug in the presence of valacyclovirase and cell homogenate showed faster generation of the parent drug at pH 7.4. The half-life of prodrugs at pH 7.4 was more than 12 h, whereas in the presence of cell homogenate the half-lives were less than 1 h. Hydrolysis by Caco-2 homogenate generated the parent compound in two steps, where the prodrug was first converted to the intermediate, propylene glycol benzoate, which was then converted to the parent compound (benzoic acid). Enzymatic hydrolysis of propylene glycol containing prodrugs by valacyclovirase showed hydrolysis of the amino acid ester part to generate the propylene glycol ester of model compound (propylene glycol benzoate) as the major product. The amino acid prodrugs containing methoxy linker were the least stable while prodrugs containing propylene glycol linker were most stable. This work suggests that the propylene glycol linker is an optimal linker for amino acid prodrugs since it has good chemical stability and is enzymatically hydrolyzed to yield the parent drug. This approach can be further extended to other non-amino acid prodrugs and to provide a chemical handle to modify lead molecules containing carboxylic group(s).

The purpose of this study was to thoroughly characterize the efflux transporters involved in the intestinal permeability of the oral microtubule polymerization inhibitor colchicine and to evaluate the role of these transporters in limiting its oral absorption. The effects of P-glycoprotein (P-gp), multidrug resistance-associated protein 2 (MRP2), and breast cancer resistance protein (BCRP) inhibitors on colchicine bidirectional permeability were studied across Caco-2 cell monolayers, inhibiting one versus multiple transporters simultaneously. Colchicine permeability was then investigated in different regions of the rat small intestine by in situ single-pass perfusion. Correlation with the P-gp/MRP2 expression level throughout different intestinal segments was investigated by immunoblotting. P-gp inhibitors [N-(4-[2-(1,2,3,4-tetrahydro-6,7-dimethoxy-2-isoquinolinyl)ethyl]-phenyl)-9,10-dihydro-5-methoxy-9-oxo-4-acridine carboxamide (GF120918), verapamil, and quinidine], and MRP2 inhibitors [3-[[3-[2-(7-chloroquinolin-2-yl)vinyl]phenyl]-(2-dimethylcarbamoylethylsulfanyl)methylsulfanyl] propionic acid (MK571), indomethacin, and p-aminohippuric acid (p-AH)] significantly increased apical (AP)-basolateral (BL) and decreased BL-AP Caco-2 transport in a concentration-dependent manner. No effect was obtained by the BCRP inhibitors fumitremorgin C (FTC) and pantoprazole. P-gp/MRP2 inhibitors combinations greatly reduced colchicine mucosal secretion, including complete abolishment of efflux (GF120918/MK571). Colchicine displayed low (versus metoprolol) and constant permeability along the rat small-intestine. GF120918 significantly increased colchicine permeability in the ileum with no effect in the jejunum, whereas MK571 augmented jejunal permeability without changing the ileal transport. The GF120918/MK571 combination caused an effect similar to that of MK571 alone in the jejunum and to that of GF120918 alone in the ileum. P-gp expression followed a gradient increasing from proximal to distal segments, whereas MRP2 decreased from proximal to distal small intestinal regions. Overall, it was revealed that the combined effect of P-gp and MRP2, but not BCRP, dominates colchicine transepithelial transport, leading to complete coverage of the entire small intestine, and makes the efflux transport dominate the intestinal permeability process.

The purpose of this research was to evaluate the difference between the pharmaceutical phosphate buffers and the gastrointestinal bicarbonates in dissolution of ketoprofen and indomethacin, to illustrate the dependence of buffer differential on biopharmaceutical properties of BCS II weak acids, and to recommend phosphate buffers equivalent to bicarbonates. The intrinsic dissolution rates of ketoprofen and indomethacin were experimentally measured using a rotating disk method at 37 °C in USP SIF/FaSSIF and various concentrations of bicarbonates. Theoretical models including an improved reaction plane model and a film model were applied to estimate the surrogate phosphate buffers equivalent to the bicarbonates. Experimental results show that the intrinsic dissolution rates of ketoprofen and indomethacin in USP and FaSSIF phosphate buffers are 1.5−3.0 times that in the 15 mM bicarbonates. Theoretical analysis demonstrates that the buffer differential is largely dependent on the drug pKaand second on solubility, and weakly dependent on the drug diffusivity. Further, in accordance with the drug pKa, solubility and diffusivity, a simple phosphate surrogate was proposed to match an average bicarbonate value (15 mM) of the upper gastrointestinal region. Specifically, phosphate buffers of 13−15 mM and 3−4 mM were recommended for ketoprofen and indomethacin, respectively. For both ketoprofen and indomethacin, the intrinsic dissolution using the phosphate surrogate buffers closely approximated the 15 mM bicarbonate buffer. This work demonstrates the substantial difference between pharmaceutical phosphates and physiological bicarbonates in determining the drug intrinsic dissolution rates of BCS II weak acids, such as ketoprofen and indomethacin. Surrogate phosphates were recommended in order to closely reflect the in vivodissolution of ketoprofen and indomethacin in gastrointestinal bicarbonates, which has significant implications for defining buffer systems for BCS II weak acids in developing in vitrobioequivalence dissolution methodology.

The purpose of this study was to investigate the role of P-gp efflux in the in vivointestinal absorption process of BCS class III P-gp substrates, i.e. high-solubility low-permeability drugs. The in vivopermeability of two H2-antagonists, cimetidine and famotidine, was determined by the single-pass intestinal perfusion model in different regions of the rat small intestine, in the presence or absence of the P-gp inhibitor verapamil. The apical to basolateral (AP−BL) and the BL−AP transport of the compounds in the presence or absence of various efflux transporters inhibitors (verapamil, erythromycin, quinidine, MK-571 and fumitremorgin C) was investigated across Caco-2 cell monolayers. P-gp expression levels in the different intestinal segments were confirmed by immunoblotting. Cimetidine and famotidine exhibited segmental dependent permeability through the gut wall, with decreased Peffin the distal ileum in comparison to the proximal regions of the intestine. Coperfusion of verapamil with the drugs significantly increased the permeability in the ileum, while no significant change in the jejunal permeability was observed. Both drugs exhibited significantly greater BL−AP than AP−BL Caco-2 permeability, indicative of net mucosal secretion. Concentration dependent decrease of this secretion was obtained by the P-gp inhibitors verapamil, erythromycin and quinidine, while no effect was evident by the MRP2 inhibitor MK-571 and the BCRP inhibitor FTC, indicating that P-gp is the transporter mediates the intestinal efflux of cimetidine and famotidine. P-gp levels throughout the intestine were inversely related to the in vivopermeability of the drugs from the different segments. The data demonstrate that for these high-solubility low-permeability P-gp substrates, P-gp limits in vivointestinal absorption in the distal segments of the small intestine; however P-gp plays a minimal role in the proximal intestinal segments due to significant lower P-gp expression levels in this region.

DX-9065a, a newly synthesized anticoagulant that selectively inhibits factor Xa, is a zwitterion and has characteristics of high water solubility and low lipophilicity. We predicted the fraction absorbed (Fa) of DX-9065a to be approximately 15-35% in humans, based on the boundary layer theory using the intestinal perfusion method in rats. However, human oral bioavailability was 2-3% in clinical trials, and the result of actual human bioavailability was lower than that of the predicted Fa. Thus, in this report, the reason for low oral bioavailability of DX-9065a was examined by in vitroand in vivoexperiments. The factors affecting oral bioavailability of DX-9065a were not the hepatic first-pass effect, degradation of the drug in intestinal fluid, nor the interaction of the drug with the intestinal mucin. Furthermore, no effect of P-gp efflux was observed. Oral absorption of the drug in rats with bile duct ligation was significantly higher than that in normal rats with bioavailability of 17 and 3%, respectively. It was confirmed that bile acids inhibited DX-9065a absorption because DX-9065a interacted with bile acids to form insoluble complexes. The results suggest that the complex formation of DX-9065a with bile acids in the intestinal tract is an important factor affecting absorption of DX-9065a.