Search

The purpose of the experiment was to determine the distribution of shear stresses in the measurement area of a natural and modified wood sample. Previous wood shear tests conducted on a typical Iosipescu specimen have shown that a complex stress state exists at the bottom of the notch. With transverse loading of the samples, flexure occurs and normal stresses arise from the bending moment and thus fibers are deformed. For the investigations oriented on shear, shear with stretching, and shear with compression, a special specimen was prepared which differed by notch geometry from a typical Iosipescu specimen. A new test machine is described in the article, which is equipped with special specimen holders to perform investigations in complex stress conditions. Crack patterns recorded for natural and modified wood are presented. For all tests, numerical finite element model simulations were performed to obtain stress distributions inside the specimens. The calculated stress distributions were visualized as contour line projections for natural and modified wood. Transverse shear strength values for the modified Iosipescu sample were found to exceed the magnitude of previously published ASTM D1037-87 test results. The test results proved that the strength properties of anisotropic materials in a complex state of stress can be assessed with great accuracy. This is very important in engineering applications.

The aim of the research was to analyze the strength parameters of epoxy-glass sandwich composites with the addition of rubber recyclate. Material samples were subjected to a static tensile test performed on a universal testing machine in accordance with the current standard for fiber-reinforced composite materials. The test results showed that the addition of rubber recyclate increases the plastic parameters of the composite, which allows considering the use of the tested material for structures loaded with the vibration and noise scale. The use of rubber recyclate to modify the strength parameters of the composite allows to reduce the amount of rubber waste and ensures the durability of the new material.

Composite materials are used in many industries. Their mechanical and physical properties as well as their low weight make them suitable for use in many constructions. Their wide application generates a problem with their disposal. Therefore, it is necessary to design new materials based on waste from polyester–glass laminates in order to introduce a closed circuit in the composite production process. The article presents research aimed at determining solid material composites with polyester–glass recyclate, in order to use these materials for modeling the structure. The aim of this study was to determine the effect of the addition of recyclate to the polyester–glass composite on the deformation and the value of the Poisson number of the material. During the study, samples from composites with the addition of polyester–glass recyclate were used. Samples made in accordance with the standard for plastics PN-EN ISO 527-4_2000P were subjected to static tensile test on a universal testing machine, with variable load parameters. During the test, the longitudinal and transverse elongations of the samples were measured using a strain gauge measuring system. On the basis of the measurements, the values of Poisson numbers were determined, which allowed for a preliminary assessment of the impact of the recyclate content in the composite on its deformability.

Automation of processes related to design and manufacturing is one of the essential goals of most manufacturing companies. The use of modern computer-aided design systems CAD allows partial automation of such processes. The parametric model can be built in some CAD systems. In the parametric model, selected dimensions are treated as control parameters. By changing the values of these parameters, we can control the remaining geometrical dimensions of the model. These dimensions can be associated with linear control parameters using mathematical relationships. Parameterization allows you to associate a geometric model with a mathematical model and allows you to automatically make changes to all elements associated with the currently modified parameter. When working on a non-parameterized model, the changes in the modelled object must be applied separately for each part and subassembly of which it is composed. In a parametric model, changing one parameter entails changes in other parameters dependent on it. Parameterization of the model allows its use for further modification of the designed structure related to customer requirements, even for that very complex, as well as accelerating the design process itself. The article presents a three-dimensional geometric model of a boat davit created with the use of the Siemens NX 9.0 software. In the work, the geometry of the crane model was parameterized for the assumed values of its height and reach. As a result of parametric modelling, the values of the individual geometric dimensions of the device’s structure elements and their mass were obtained. It was justified that thanks to the use of parameterized models, the time of design and construction processes can be significantly reduced, which makes the process more efficient.

Aluminum alloy AW-7020 is characterized by high fatigue strength. It is used primarily in welded constructions, which should be characterized by high strength and resistance to cyclically variable operational loads. They have found wide application in light welded ship constructions, bridge-carrying elements, cranes, hoists, vehicles, roof beams in roof constructions, and security barriers. The paper attempts to determine the influence of selected types of applied heat treatment on the structure and hardness of the AW-7020 alloy used in the shipbuilding industry. Heat treatment processes have been described in the aspect of improving the mechanical and strength properties of the tested alloy and its impact on ductility. Several supersaturation and aging sequences were used in the course of the study. The results of hardness tests of aluminum alloy after its earlier supersaturation and aging (natural and artificial) have been presented. Photographs of internal structures in individual sequences were taken. The obtained hardness measurement results and analysis of structures in individual states were compared with the delivery condition. To illustrate selected heat treatment processes, transient tests were also performed to accurately verify the effect of aging after saturation on hardness and changes occurring in the material structures. The results of the material tests showed that the type of heat treatment after saturation is of significant importance for the hardness and structures of the AW-7020 alloy. As a result of the research, it was proved that the tested alloy obtained in the artificial aging process more favourable strength properties, in a shorter period, compared to the use of the natural aging process.