Search

During past decade, special focus has been laid on ultrasmall nanoparticles for nanomedicine and eventual clinical translation. To achieve such translation, a lot of challenges have to be solved. Among them, size determination is a particularly tricky one. In this aim, we have developed a simple hyphenation between Taylor dispersion analysis and inductively coupled plasma-mass spectrometry (ICP-MS). This method was proven to allow the determination of the hydrodynamic radius of metal-containing nanoparticles, even for sizes under 5 nm, with a relative standard deviation below 10% (with a 95% confidence interval) and at low concentrations. Moreover, its specificity provides the opportunity to perform measurements in complex biological media. This was applied to the characterization of an ultrasmall gadolinium-containing nanoparticle used as a theranostic agent in cancer diseases. Hydrodynamic radii measured in urine, cerebrospinal fluid, and undiluted serum demonstrated the absence of interaction between the particle and biological compounds such as proteins.

A nano-gravimetric detector (NGD) for gas chromatography is based on a nanoelectromechanical array of adsorbent-coated resonating double clamped beams. NGD is a concentration-sensitive detector and its sensitivity is analyte-dependent based on the affinity of the analyte with the porous layer coated on the NEMS surface. This affinity is also strongly related to the NGD temperature (NGD working temperature can be dynamically set up from 40 to 220 °C), so the sensitivity can be tuned through temperature detector control. An adsorption–desorption model was set up to characterize the NGD response on a large set of n-alkanes from C10to C22at different NGD temperatures. For fast identification of petroleum mixture based on chromatogram fingerprint, a general strategy for NGD temperature program design was developed leading to a constant relative response factor between 0.96 and 1.03 for all the alkanes, and then chromatograms are very similar to those obtained with a flame ionization detector (FID). The analysis of a real petroleum fluid was also performed and compared to FID results: quantitative results obtained for all the analytes were satisfactory according to precision (<5%) and accuracy (average relative error = 4.3%). Based on such temperature control strategy, NGD sensitivity and the dynamic linear range can be adjusted and detection limits at a picogram level can be easily achieved for all n-alkanes.

An efficient and reproducible photopolymerized poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) was synthesized in Teflon‐coated fused‐silica capillaries (100 μm id) and functionalized by reaction of triethylamine with reactive epoxy groups. We report here the successful transfer of a standard polymerization mixture optimized for the thermally initiated synthesis of glycidyl‐based monolith to photo‐induced polymerization. The monolith obtained after optimization of the photo‐initiation conditions was characterized in reverse‐phase chromatography evaluating its suitability in terms of efficiency, retention and hydrodynamic permeability. Reproducibility of the photo‐induced procedure was satisfactory with RSD below 6% for retention and efficiency and slightly higher for hydrodynamic permeability (12%). The functionalized generic support was then used in nano‐ion‐exchange chromatography. Efficiencies up to 75 000 plates/m, ion‐exchange capacity of 8 nano‐equivalents/cm of monolithic column, with a combination of a satisfactory hydrodynamic permeability allowed to perform fast separations of five inorganic anions in <3 min maintaining baseline resolution. The efficiency of the monolith was not retention‐dependent, demonstrating its wide range of possible applications for highly retained anions.

In recent years, metal oxides such as titania have been commercially available as chromatographic beds that can potentially be used to achieve novel separations of polar compounds. For example β blockers, which are more often encountered in environmental sciences, have a wide range of polarity, and their basic character leads to difficult sample treatment and separation on conventional silica‐based sorbents. The contribution of titania to the selective analysis of nine β blockers was evaluated in terms of retention mechanisms observed in hydrophilic interaction LC using acetonitrile/water mobile phases with various additives. The mobile phase additives enabled to control the β blocker charge as well as the titania surface charge. Depending on their respective ionic state, various retention mechanisms were identified at low water contents (<40%), including mainly adsorption mixed with hydrophilic interaction LC partition, ion exchange and ion exclusion. An unexpected retention was also observed for high water content and high pH, changing the selectivity of the support.