Search

The influence of friction stir welding parameters on thermo-mechanical behavior of the material during welding is analyzed. An aluminum alloy is considered (Al 2024 T351), and different rotating and welding speeds are applied. The finite element model consists of the working plate (Al alloy), backing plate and welding tool. The influence of the welding conditions on material behavior is taken into account the application of the Johnson-Cook material model. The rotation speed of the tool affects the results. If increased, it contributes to an increase of friction-generated heat intensity. The other component of the generated heat, which stems from the plastic deformation of the material, is negligibly changed. When the welding speed, i.e. tool translation speed, is increased, the intensity of friction-generated heat decreases, while the heat generation due to plastic deforming is becoming more pronounced. Summed, this leads to rather small change of the total generation. The changes of the heat generation influence both the temperature field and reaction force. Also, the inadequate selection of welding parameters resulted in occurrence of the defects (pores) in the model.

The influence of friction stir welding parameters on thermo-mechanical behavior of the material during welding is analyzed. An aluminum alloy is considered (Al 2024 T351), and different rotating and welding speeds are applied. The finite element model consists of the working plate (Al alloy), backing plate and welding tool. The influence of the welding conditions on material behavior is taken into account the application of the Johnson-Cook material model. The rotation speed of the tool affects the results. If increased, it contributes to an increase of friction-generated heat intensity. The other component of the generated heat, which stems from the plastic deformation of the material, is negligibly changed. When the welding speed, i.e. tool translation speed, is increased, the intensity of friction-generated heat decreases, while the heat generation due to plastic deforming is becoming more pronounced. Summed, this leads to rather small change of the total generation. The changes of the heat generation influence both the temperature field and reaction force. Also, the inadequate selection of welding parameters resulted in occurrence of the defects (pores) in the model.

Integrity of pipes is typically assessed by testing fracture mechanics specimens, such as compact tensile (CT) or single-edge notched bending (SENB). However, for some pipe dimensions it is not easy or possible to fabricate a specimen conforming to the requirements of standard procedures. A new type of specimen is proposed recently, which can be advantageous for relatively small pipe diameters and axial defects - the pipe ring notch bend specimen - PRNB. In this work, criteria for failure by ductile fracture of PRNB specimens are determined experimentally and by application of micromechanical analysis. The influence of size of the specimen, as well as size and shape of the stress concentrator, is analysed. The results of this study, along with previous authors results, lead to the conclusion that the pipe ring specimens can be applied in integrity assessment of pipes with defects. Also, the benefits of their application include much simpler fabrication and the same material history as the pipe itself. (C) 2017 Elsevier Ltd. All rights reserved.

In this paper the micromechanical approach to ductile fracture was applied in a study of constraint effect on crack growth initiation in mismatched welded joints. The single-edged notched bend specimens (precrack length a(0)/W=0.32) were experimentally and numerically analyzed. The coupled micromechanical model proposed by Gurson, Tvergaard and Needleman was used. Constraint effect was tested by varying widths of the welded joints (6, 12 and 18mm). High-strength low-alloyed (HSLA) steel was used as the base metal in a quenched and tempered condition. The flux-cored are-welding process in shielding gas was used. Two different fillers were selected to obtain over- and undermatched weld metal. The micromechanical parameters used in prediction of the crack growth initiation on precracked specimen were calibrated on a round smooth specimen. The difference in fracture behavior between over- and undermatched welded joints obtained in experimental results was followed by numerical computations of void volume fraction in front of the crack tip.