Search

Pyrogenic carbon (PyC) derives from incomplete combustion of organic matter and is ubiquitous in terrestrial and aquatic systems. Most PyC is inherently more stable against decomposition than plant residues, and PyC therefore forms an important component of the global carbon (C) cycle. During the Holocene, about 436 Pg organic C accumulated in northern peatlands, and we hypothesize that PyC may contribute substantially to that C stock. We studied 70 samples from 19 intact and degraded European peatland sites and analyzed their PyC content by 13C nuclear magnetic resonance spectroscopy and molecular modeling and peat age and accumulation by radiocarbon dating. Classification of a peatland as either intact or degraded was based on the comparison between apparent and expected long-term C accumulation rates. On average, PyC amounted for 13·5% of soil C across sites, and accounted for up to 50% at single sites. The amount of PyC increased significantly with peat age. Degraded peatlands had lost approximately 56 kg C m�2, half of their former C stock. However, degraded peat had higher PyC contents than intact one. Selective enrichment of PyC during both peat build-up and decomposition seems to be an important factor fostering PyC accumulation. Assignment of our results to peatlands of the northern hemisphere, stratified by age, revealed an estimated PyC stock of 62 (±22) Pg. Our estimate indicates a substantial and hitherto unquantified contribution of northern peatlands to global PyC storage. © 2017 The Authors. Land Degradation & Development Published by John Wiley & Sons Ltd.

BackgroundA major obstacle in single-cell sequencing is sample contamination with foreign DNA. To guarantee clean genome assemblies and to prevent the introduction of contamination into public databases, considerable quality control efforts are put into post-sequencing analysis. Contamination screening generally relies on reference-based methods such as database alignment or marker gene search, which limits the set of detectable contaminants to organisms with closely related reference species. As genomic coverage in the tree of life is highly fragmented, there is an urgent need for a reference-free methodology for contaminant identification in sequence data.ResultsWe present acdc, a tool specifically developed to aid the quality control process of genomic sequence data. By combining supervised and unsupervised methods, it reliably detects both known and de novo contaminants. First, 16S rRNA gene prediction and the inclusion of ultrafast exact alignment techniques allow sequence classification using existing knowledge from databases. Second, reference-free inspection is enabled by the use of state-of-the-art machine learning techniques that include fast, non-linear dimensionality reduction of oligonucleotide signatures and subsequent clustering algorithms that automatically estimate the number of clusters. The latter also enables the removal of any contaminant, yielding a clean sample. Furthermore, given the data complexity and the ill-posedness of clustering, acdc employs bootstrapping techniques to provide statistically profound confidence values. Tested on a large number of samples from diverse sequencing projects, our software is able to quickly and accurately identify contamination. Results are displayed in an interactive user interface. Acdc can be run from the web as well as a dedicated command line application, which allows easy integration into large sequencing project analysis workflows.ConclusionsAcdc can reliably detect contamination in single-cell genome

BackgroundA major obstacle in single-cell sequencing is sample contamination with foreign DNA. To guarantee clean genome assemblies and to prevent the introduction of contamination into public databases, considerable quality control efforts are put into post-sequencing analysis. Contamination screening generally relies on reference-based methods such as database alignment or marker gene search, which limits the set of detectable contaminants to organisms with closely related reference species. As genomic coverage in the tree of life is highly fragmented, there is an urgent need for a reference-free methodology for contaminant identification in sequence data.ResultsWe present acdc, a tool specifically developed to aid the quality control process of genomic sequence data. By combining supervised and unsupervised methods, it reliably detects both known and de novo contaminants. First, 16S rRNA gene prediction and the inclusion of ultrafast exact alignment techniques allow sequence classification using existing knowledge from databases. Second, reference-free inspection is enabled by the use of state-of-the-art machine learning techniques that include fast, non-linear dimensionality reduction of oligonucleotide signatures and subsequent clustering algorithms that automatically estimate the number of clusters. The latter also enables the removal of any contaminant, yielding a clean sample. Furthermore, given the data complexity and the ill-posedness of clustering, acdc employs bootstrapping techniques to provide statistically profound confidence values. Tested on a large number of samples from diverse sequencing projects, our software is able to quickly and accurately identify contamination. Results are displayed in an interactive user interface. Acdc can be run from the web as well as a dedicated command line application, which allows easy integration into large sequencing project analysis workflows.ConclusionsAcdc can reliably detect contamination in single-cell genome

The present thesis deals with the foundations for solving the decision problem of site selection for a feasibility study of gas-fired power plants, based on realistic and practical statements, under a business approach. The analysis of different theories and the investigation of site-relevant decision criteria has illustrated the broad range of site-specific factors and criteria that are to be taken into account. On the basis of existing projects, in which site theories were analysed for various industries, the present research project thus lays a new foundation for an extended specific approach in the area of electricity generation in gas-fired power plants. For gas-fired power plants, IEA anticipates a major increase, but otherwise notes that renewables and nuclear power account for more than half of all the new capacity added worldwide until 2040. Due to the low investment costs per KW of installed capacity, the high efficiency factor, the low CO2-emissions and the relatively short construction times, a large number of gas and steam power plants are planned or are already under construction in Europe. A lot of countries have been focussing on liquefaction of natural gas (LNG) for several years. The physical properties of LNG facilitate its transport on tankers to the ports of destination and / or power plants, where the natural gas is returned to its gaseous state. Thus, LNG offers a practical alternative to the gas transport by pipelines and a possibility to put the procurement structure on a broader basis. This, in turn, will lead to new alternatives for the choice of sites. Projects like the Baltic pipeline or the Nabuko project offer the prospect of a greater security of supply. The study considers the impact of measures to secure supply as decentralised generation and the use of renewable energies for power generation. The expansion targets of the EU 15 countries of 2004 and the values in each EU member country resulted in an indicative target value of aroun, La presente tesis trata sobre las bases para la solución del problema de decisión de la selección del emplazamiento para un estudio de viabilidad de las plantas eléctricas de gas, basado en declaraciones realistas y prácticas, bajo un enfoque de negocio. El análisis de las diferentes teorías y la investigación de criterios de decisión relevantes ha ilustrado la amplia gama de factores específicos del lugar y los criterios que han de ser tenidos en cuenta. Sobre la base de los proyectos existentes, en los que se analizaron las teorías de selección de sitio para diversas industrias, el presente proyecto de investigación establece una nueva base para un enfoque específico en el área de generación de electricidad en centrales eléctricas de gas. Para las plantas eléctricas a gas, la AIE prevé un aumento importante de capacidades, y señala que las energías renovables y la energía nuclear cuenta con más de la mitad de toda la nueva capacidad añadida en todo el mundo hasta el año 2040. Debido a los bajos costos de inversión por kW de potencia instalada, el alto factor de eficiencia, las bajas emisiones de CO2 y los tiempos de construcción relativamente cortos, un gran número de plantas usando gas ya están en construcción en Europa. Una gran cantidad de países se han centrando en la licuefacción del gas natural (GNL) desde hace varios años. Las propiedades físicas de GNL facilitar su transporte en barcos a los puertos de destino, donde el gas natural se evapora a su estado gaseoso. El GNL ofrece una alternativa práctica para el transporte de gas a través de gasoductos y una posibilidad de poner la estructura de adquisición sobre una base más amplia. Esto, a su vez, dará lugar a nuevas alternativas para la elección de los sitios. Proyectos como el oleoducto del Báltico o el proyecto Nabuko ofrecen la perspectiva de una mayor seguridad del suministro. El estudio considera el impacto de las medidas para garantizar el suministro como la generación descentralizada y el uso de ene, Postprint (published version)

The demixing process of aqueous poly(N-isopropylacrylamide) (PNIPAM) solutions can occur either via a nucleation and growth process or via spinodal decomposition. The ensuing self-assembly, leading to heterogeneous morphologies within the PNIPAM solution, is codetermined by kinetic processes caused by molecular transport. By subjecting PNIPAM solutions to cyclic changes in temperature leading to repeated crossing of the demixing transition, we are able to assess the importance of kinetics as well as of overheating and supercooling of the phase transition within the metastable range delimited by the binodal and spinodal lines. First indications about the location of these stability limits for the low- and high-temperature phases, separated by about 1.6 K, could be gained by detailed kinetic studies of the refractive index. These investigations are made possible due to the novel technique of temperature-modulated optical refractometry.

For aqueous poly(N-isopropyl acrylamide) (PNIPAM) solutions, a structural instability leads to the collapse and aggregation of the macromolecules at the temperature-induced demixing transition. The accompanying cooperative dehydration of the PNIPAM chains is known to play a crucial role in this phase separation. We elucidate the impact of partial dehydration of PNIPAM on the volume changes related to the phase separation of dilute to concentrated PNIPAM solutions. Quasi-elastic neutron scattering enables us to directly follow the isotropic jump diffusion behavior of the hydration water and the almost freely diffusing water. As the hydration number decreases from 8 to 2 for the demixing 25 mass % PNIPAM solution, only a partial dehydration of the PNIPAM chains occurs. Dilatation studies reveal that the transition-induced volume changes depend in a remarkable manner on the PNIPAM concentration of the solutions. The excess volume per mole of H2O molecules expelled from the solvation layers of PNIPAM during phase separation probably strongly increases from dilute to concentrated PNIPAM solutions. This finding is qualitatively related to the immense strain-softening previously observed for demixing PNIPAM solutions.

The phase separation of aqueous poly(N-isopropyl acrylamide) (PNIPAM) solutions is known to strongly affect their volume expansion behaviour and the elastic moduli, as the latter are strongly coupled to the macroscopic order parameter. On the molecular scale, considerable changes in H-bonding and hydrophobic interactions, as well as in the structure govern the demixing process. However, the relationship between the molecular and macroscopic order parameters is unclear for such complex phase-separating solutions. We contribute to the clarification of this problem by relating optical to volumetric properties across the demixing transition of dilute to concentrated aqueous PNIPAM solutions. Far from the demixing temperature, the temperature dependence of the refractive index is predominantly determined by thermal expansion. In the course of phase separation, the refractive index is dominated by the anomalous behaviour of the specific refractivity, which reflects the spatio-temporally averaged changes in molecular interactions and the structural reorganization of the demixing solutions. Moreover, the presence of relaxation processes is studied by the complex expansion coefficient using the novel technique of temperature modulated optical refractometry.

Diglycidyl ether of bisphenol A (DGEBA) is widely exploited as an epoxy resin in adhesives and coatings. In this paper, it is used as an oligomer matrix for silica-filled nanocomposites. Rheological measurements show that the pure matrix obeys power-law relaxation dynamics in the vicinity of the dynamic glass transition of this low-molecular-weight glass former. In the filled systems, a low-frequency relaxation appears additionally to the structural alpha-process of the matrix. Considering the nanocomposites as Newtonian hard-sphere suspensions at low angular frequencies (or high temperatures), the modified terminal regime behavior of the matrix can be linked to strain-induced perturbations of the isotropic filler distributions. While in the low-frequency regime hydrodynamic stresses relax instantaneously, the Brownian stress relaxation is viscoelastic and can be evidenced by dynamic rheological measurements. At higher angular frequencies, the alpha-process of the matrix superimposes on the Brownian stress relaxation. In particular, we were able to depict the low-frequency anomaly for concentrated, semi-dilute, and even for dilute suspensions.

For aqueous poly(N-isopropyl acrylamide) (PNIPAM) solutions, a structural instability leads to the collapse and aggregation of the macromolecules at the temperature-induced demixing transition. The accompanying cooperative dehydration of the PNIPAM chains is known to play a crucial role in this phase separation. We elucidate the impact of partial dehydration of PNIPAM on the volume changes related to the phase separation of dilute to concentrated PNIPAM solutions. Quasi-elastic neutron scattering enables us to directly follow the isotropic jump diffusion behavior of the hydration water and the almost freely diffusing water. As the hydration number decreases from 8 to 2 for the demixing 25 mass % PNIPAM solution, only a partial dehydration of the PNIPAM chains occurs. Dilatation studies reveal that the transition-induced volume changes depend in a remarkable manner on the PNIPAM concentration of the solutions. The excess volume per mole of H2O molecules expelled from the solvation layers of PNIPAM during phase separation probably strongly increases from dilute to concentrated PNIPAM solutions. This finding is qualitatively related to the immense strain-softening previously observed for demixing PNIPAM solutions.

The demixing process of aqueous poly(N-isopropylacrylamide) (PNIPAM) solutions can occur either via a nucleation and growth process or via spinodal decomposition. The ensuing self-assembly, leading to heterogeneous morphologies within the PNIPAM solution, is codetermined by kinetic processes caused by molecular transport. By subjecting PNIPAM solutions to cyclic changes in temperature leading to repeated crossing of the demixing transition, we are able to assess the importance of kinetics as well as of overheating and supercooling of the phase transition within the metastable range delimited by the binodal and spinodal lines. First indications about the location of these stability limits for the low- and high-temperature phases, separated by about 1.6 K, could be gained by detailed kinetic studies of the refractive index. These investigations are made possible due to the novel technique of temperature-modulated optical refractometry.

The phase separation of aqueous poly(N-isopropyl acrylamide) (PNIPAM) solutions is known to strongly affect their volume expansion behaviour and the elastic moduli, as the latter are strongly coupled to the macroscopic order parameter. On the molecular scale, considerable changes in H-bonding and hydrophobic interactions, as well as in the structure govern the demixing process. However, the relationship between the molecular and macroscopic order parameters is unclear for such complex phase-separating solutions. We contribute to the clarification of this problem by relating optical to volumetric properties across the demixing transition of dilute to concentrated aqueous PNIPAM solutions. Far from the demixing temperature, the temperature dependence of the refractive index is predominantly determined by thermal expansion. In the course of phase separation, the refractive index is dominated by the anomalous behaviour of the specific refractivity, which reflects the spatio-temporally averaged changes in molecular interactions and the structural reorganization of the demixing solutions. Moreover, the presence of relaxation processes is studied by the complex expansion coefficient using the novel technique of temperature modulated optical refractometry.

Diglycidyl ether of bisphenol A (DGEBA) is widely exploited as an epoxy resin in adhesives and coatings. In this paper, it is used as an oligomer matrix for silica-filled nanocomposites. Rheological measurements show that the pure matrix obeys power-law relaxation dynamics in the vicinity of the dynamic glass transition of this low-molecular-weight glass former. In the filled systems, a low-frequency relaxation appears additionally to the structural alpha-process of the matrix. Considering the nanocomposites as Newtonian hard-sphere suspensions at low angular frequencies (or high temperatures), the modified terminal regime behavior of the matrix can be linked to strain-induced perturbations of the isotropic filler distributions. While in the low-frequency regime hydrodynamic stresses relax instantaneously, the Brownian stress relaxation is viscoelastic and can be evidenced by dynamic rheological measurements. At higher angular frequencies, the alpha-process of the matrix superimposes on the Brownian stress relaxation. In particular, we were able to depict the low-frequency anomaly for concentrated, semi-dilute, and even for dilute suspensions.

The demixing process of aqueous poly(N-isopropylacrylamide) (PNIPAM) solutions can occur either via a nucleation and growth process or via spinodal decomposition. The ensuing self-assembly, leading to heterogeneous morphologies within the PNIPAM solution, is codetermined by kinetic processes caused by molecular transport. By subjecting PNIPAM solutions to cyclic changes in temperature leading to repeated crossing of the demixing transition, we are able to assess the importance of kinetics as well as of overheating and supercooling of the phase transition within the metastable range delimited by the binodal and spinodal lines. First indications about the location of these stability limits for the low- and high-temperature phases, separated by about 1.6 K, could be gained by detailed kinetic studies of the refractive index. These investigations are made possible due to the novel technique of temperature-modulated optical refractometry.

The volume expansion coefficient is a thermodynamic key parameter yielding insight into molecular cohesion and organization of condensed matter. We present here the novel experimental technique temperature modulated optical refractometry (TMOR) to determine not only the static but also the dynamic volume expansion coefficient of transparent condensed matter of cubic or isotropic symmetry. A specialty of TMOR is its capability to measure the volume expansion coefficient under quasi-isothermal conditions. In this experimental mode TMOR is able to differentiate between static, dynamic and kinetic contributions to the volume expansion coefficient. Due to these features TMOR especially qualifies for the investigation of structural changes provoked by structural phase transitions, glass transitions and other structure-related transformations in transparent condensed matter. The scientific potential of this novel experimental technique is demonstrated by evidencing anomalies of the complex volume expansion coefficient accompanying the chemically induced glass transition occurring during the formation of a covalently cross-linked epoxy network.

The volume expansion coefficient is a thermodynamic key parameter yielding insight into molecular cohesion and organization of condensed matter. We present here the novel experimental technique temperature modulated optical refractometry (TMOR) to determine not only the static but also the dynamic volume expansion coefficient of transparent condensed matter of cubic or isotropic symmetry. A specialty of TMOR is its capability to measure the volume expansion coefficient under quasi-isothermal conditions. In this experimental mode TMOR is able to differentiate between static, dynamic and kinetic contributions to the volume expansion coefficient. Due to these features TMOR especially qualifies for the investigation of structural changes provoked by structural phase transitions, glass transitions and other structure-related transformations in transparent condensed matter. The scientific potential of this novel experimental technique is demonstrated by evidencing anomalies of the complex volume expansion coefficient accompanying the chemically induced glass transition occurring during the formation of a covalently cross-linked epoxy network.

Elastic nonlinearities are particularly relevant for soft materials because of their inherently small linear elasticity. Nonlinear elastic properties may even take over the leading role for the transformation at mechanical instabilities accompanying many phase transitions in soft matter. Because of inherent experimental difficulties, only little is known about third order (nonlinear) elastic constants within liquids, gels and polymers. Here we show that a key concept to access third order elasticity in soft materials is the determination of mode Gr¨uneisen parameters. We report the first direct observation of third order elastic constants across mechanical instabilities accompanying the liquid–liquid demixing transition of semi-dilute aqueous poly(N-isopropylacrylamide) (PNIPAM) solutions. Immense elastic nonlinearities, leading to a strong strain-softening in the phase-separating PNIPAM solutions, are observed. Molecular mechanisms, which may be responsible for these immense elastic nonlinearities, are discussed. The importance of third order elastic constants in comparison to second order (linear) elastic constants in the demixing PNIPAM solutions evidences the need to focus more on the general role played by nonlinear elasticity at phase transitions within synthetic and biological liquids and gels.

Kinetic processes, which are joined with mass transport, are studied in the vicinity of the sharp LCST-type demixing transition of semi-dilute aqueous poly(N-isopropyl acrylamide) (PNIPAM) solutions. These processes are slow as compared to the highly cooperative collapse of individual polymer chains. Purely elastic properties, that are particularly sensitive to this phase transition, are addressed depending on the temperature, space and time by Brillouin spectroscopy. Above the demixing temperature Tc, we discriminate between kinetics related to the phase separation into PNIPAM-rich and PNIPAM-poor domains and kinetics connected to the impact of gravitation on the on-going phase separation. Using shallow temperature jumps of 0.3 C, the growth of compact PNIPAM-rich agglomerates with identical gel-like mechanical consistency is provoked independently of temperature and position within the sample above Tc. Astonishingly, the transition temperature does not vary while heating or cooling the solutions across the phase transition, although the elastic properties depend strongly on space and time during the equilibration of PNIPAM concentration gradients following the re-entrance into the lowtemperature phase.

Elastic nonlinearities are particularly relevant for soft materials because of their inherently small linear elasticity. Nonlinear elastic properties may even take over the leading role for the transformation at mechanical instabilities accompanying many phase transitions in soft matter. Because of inherent experimental difficulties, only little is known about third order (nonlinear) elastic constants within liquids, gels and polymers. Here we show that a key concept to access third order elasticity in soft materials is the determination of mode Gr¨uneisen parameters. We report the first direct observation of third order elastic constants across mechanical instabilities accompanying the liquid–liquid demixing transition of semi-dilute aqueous poly(N-isopropylacrylamide) (PNIPAM) solutions. Immense elastic nonlinearities, leading to a strong strain-softening in the phase-separating PNIPAM solutions, are observed. Molecular mechanisms, which may be responsible for these immense elastic nonlinearities, are discussed. The importance of third order elastic constants in comparison to second order (linear) elastic constants in the demixing PNIPAM solutions evidences the need to focus more on the general role played by nonlinear elasticity at phase transitions within synthetic and biological liquids and gels.

Mechanical instabilities accompanying the demixing transition of semi-dilute aqueous poly(Nisopropylacrylamide) (PNIPAM) solutions are probed for the first time with Brillouin spectroscopy, densitometry and refractometry. The particular role of the elastic moduli and the mass density at this coil-to-globule transition followed by molecular aggregation is investigated. Even though the demixing transition of PNIPAM solutions is denoted as a volume phase transition, it turns out that this transition is governed by the elastic properties, instead of the volume properties. This is consistent with earlier findings made for the demixing transition in chemically cross-linked PNIPAM hydrogels. Above the demixing temperature, Brillouin spectroscopy discriminates compact PNIPAM-rich agglomerates with sizes larger than 200 nm. Interestingly, these agglomerates possess a sharp distribution of elastic moduli, which can be attributed without any doubt to a material with gel-like mechanical consistency. Thus the phase-separated PNIPAM-rich agglomerates are not in the glassy state.

Mechanical instabilities accompanying the demixing transition of semi-dilute aqueous poly(Nisopropylacrylamide) (PNIPAM) solutions are probed for the first time with Brillouin spectroscopy, densitometry and refractometry. The particular role of the elastic moduli and the mass density at this coil-to-globule transition followed by molecular aggregation is investigated. Even though the demixing transition of PNIPAM solutions is denoted as a volume phase transition, it turns out that this transition is governed by the elastic properties, instead of the volume properties. This is consistent with earlier findings made for the demixing transition in chemically cross-linked PNIPAM hydrogels. Above the demixing temperature, Brillouin spectroscopy discriminates compact PNIPAM-rich agglomerates with sizes larger than 200 nm. Interestingly, these agglomerates possess a sharp distribution of elastic moduli, which can be attributed without any doubt to a material with gel-like mechanical consistency. Thus the phase-separated PNIPAM-rich agglomerates are not in the glassy state.

High-performance refractometry and infrared spectroscopy are combined in order to elucidate the gelation process and the glass transition during the network formation of epoxies and epoxy-based nanocomposites. Whereas infrared spectroscopy yields the chemical conversion due to the opening of oxirane rings during the covalent network formation, high-performance refractometry is extremely sensitive to the accompanying changes of the arrangement of the molecular network. In accordance with the Lorentz-Lorenz relationship, the evolution of the refractive index seems to reflect that of the mass density during polymerization of the epoxy-based systems within the limits of a few percent. The slight deviations from the Lorentz-Lorenz relationship, which occur during the gelation of the epoxy-based systems, are attributed to long-ranged dipole-dipole interactions, which respond at optical frequencies. This point of view is supported by the fact that chemically inert silica nanoparticles embedded in the pure epoxy matrix as disturbances for these dipole-dipole interactions are able to diminish or even to suppress totally this excess contribution of the refractive index.

Calorimetry and high-performance refractometry are applied to study the network formation and accompanying morphological changes in reactive polydimethylsiloxane systems filled with silica nanoparticles. Both methods give insight into the structure formation during the polymerization of silica-filled silicone nanocomposites in an impressively complementary way. It will be shown that the specific heat flow as determined by calorimetry does not allow for estimating the chemical conversion whereas the refractive index does, which results from the different perspectives of both techniques on the relevant polymerization, adsorption, and desorption processes occurring in the nanocomposites. Finally, the interphase formation in the polymeric matrix in the vicinity of the nanoparticles and the network formation within the silicone rubber are demonstrated to be strongly correlated processes.

Calorimetry and high-performance refractometry are applied to study the network formation and accompanying morphological changes in reactive polydimethylsiloxane systems filled with silica nanoparticles. Both methods give insight into the structure formation during the polymerization of silica-filled silicone nanocomposites in an impressively complementary way. It will be shown that the specific heat flow as determined by calorimetry does not allow for estimating the chemical conversion whereas the refractive index does, which results from the different perspectives of both techniques on the relevant polymerization, adsorption, and desorption processes occurring in the nanocomposites. Finally, the interphase formation in the polymeric matrix in the vicinity of the nanoparticles and the network formation within the silicone rubber are demonstrated to be strongly correlated processes.

High-performance refractometry and infrared spectroscopy are combined in order to elucidate the gelation process and the glass transition during the network formation of epoxies and epoxy-based nanocomposites. Whereas infrared spectroscopy yields the chemical conversion due to the opening of oxirane rings during the covalent network formation, high-performance refractometry is extremely sensitive to the accompanying changes of the arrangement of the molecular network. In accordance with the Lorentz-Lorenz relationship, the evolution of the refractive index seems to reflect that of the mass density during polymerization of the epoxy-based systems within the limits of a few percent. The slight deviations from the Lorentz-Lorenz relationship, which occur during the gelation of the epoxy-based systems, are attributed to long-ranged dipole-dipole interactions, which respond at optical frequencies. This point of view is supported by the fact that chemically inert silica nanoparticles embedded in the pure epoxy matrix as disturbances for these dipole-dipole interactions are able to diminish or even to suppress totally this excess contribution of the refractive index.

Structural developments are investigated in network-forming reactive polymers by time- and 10 space-resolved scanning Brillouin microscopy. Hypersonic properties are probed to reveal the subtle interplay between molecular transport, dissolution, polymerization and network defects in the vicinity of the interface between reactants, which are either pure epoxy resin or various epoxy resin-hardener mixtures, topped by a layer of pure hardener. The trans-interfacial polymerization produces heterogeneous epoxy structures of either gelatinous or glassy nature. Interestingly, the 15 hardener can easily penetrate and swell these networks and epoxy network fragments can be transported over several millimeters by convective flow. The observed features may be used to form interpenetrating networks during self-healing procedures.

Shelf life at room temperature and curing behaviour at elevated temperature are studied for hot-curing accelerated epoxies (EP, diglycidylether of bisphenol A plus dicyandiamide (Dicy)) by FTIR-spectroscopy and modulated DSC. The accelerator is added either directly or with nano-zeolite filler to the EP. Due to the immobilization of the accelerator in the pores of the nano-zeolite, the shelf life of this EP is 5 times longer than for the EP containing free accelerator. While the free accelerator acts during the whole heating step to curing temperature, the nano-zeolite does not release the accelerator before ca. 100 °C. As monitored by light microscopy, the released accelerator not only supports the curing but also stimulates the dissolution of the solid Dicy. As the result, network formation at 170 °C finishes within less than 25 minutes for the nano-filled EP.

Structural developments are investigated in network-forming reactive polymers by time- and 10 space-resolved scanning Brillouin microscopy. Hypersonic properties are probed to reveal the subtle interplay between molecular transport, dissolution, polymerization and network defects in the vicinity of the interface between reactants, which are either pure epoxy resin or various epoxy resin-hardener mixtures, topped by a layer of pure hardener. The trans-interfacial polymerization produces heterogeneous epoxy structures of either gelatinous or glassy nature. Interestingly, the 15 hardener can easily penetrate and swell these networks and epoxy network fragments can be transported over several millimeters by convective flow. The observed features may be used to form interpenetrating networks during self-healing procedures.

Static and dynamic hypersonic properties are probed to reveal the subtle interplay between demixing, matter transport, chemical network formation, polymer network swelling, and network damage in the vicinity of the interface between the reactants of amine-curing epoxies. An innovative time- and space-resolved acoustic microscopy, called scanning Brillouin microscopy, gives access to these competing transport and structure formation processes in epoxy systems consisting of either pure resin, alumina nanoparticles-filled resin, or various epoxy resin-hardener mixtures topped by a layer of pure hardener. Static and dynamic hypersonic properties are probed to reveal the subtle interplay between demixing, matter transport, chemical network formation, polymer network swelling, and network damage in the vicinity of the interface between the reactants of amine-curing epoxies. An innovative time- and space-resolved acoustic microscopy, called scanning Brillouin microscopy, gives access to these competing transport and structure formation processes in epoxy systems consisting of either pure resin, alumina nanoparticles-filled resin, or various epoxy resin-hardener mixtures topped by a layer of pure hardener.

Shelf life at room temperature and curing behaviour at elevated temperature are studied for hot-curing accelerated epoxies (EP, diglycidylether of bisphenol A plus dicyandiamide (Dicy)) by FTIR-spectroscopy and modulated DSC. The accelerator is added either directly or with nano-zeolite filler to the EP. Due to the immobilization of the accelerator in the pores of the nano-zeolite, the shelf life of this EP is 5 times longer than for the EP containing free accelerator. While the free accelerator acts during the whole heating step to curing temperature, the nano-zeolite does not release the accelerator before ca. 100 °C. As monitored by light microscopy, the released accelerator not only supports the curing but also stimulates the dissolution of the solid Dicy. As the result, network formation at 170 °C finishes within less than 25 minutes for the nano-filled EP.

Static and dynamic hypersonic properties are probed to reveal the subtle interplay between demixing, matter transport, chemical network formation, polymer network swelling, and network damage in the vicinity of the interface between the reactants of amine-curing epoxies. An innovative time- and space-resolved acoustic microscopy, called scanning Brillouin microscopy, gives access to these competing transport and structure formation processes in epoxy systems consisting of either pure resin, alumina nanoparticles-filled resin, or various epoxy resin-hardener mixtures topped by a layer of pure hardener. Static and dynamic hypersonic properties are probed to reveal the subtle interplay between demixing, matter transport, chemical network formation, polymer network swelling, and network damage in the vicinity of the interface between the reactants of amine-curing epoxies. An innovative time- and space-resolved acoustic microscopy, called scanning Brillouin microscopy, gives access to these competing transport and structure formation processes in epoxy systems consisting of either pure resin, alumina nanoparticles-filled resin, or various epoxy resin-hardener mixtures topped by a layer of pure hardener.

Structural developments are investigated in network-forming reactive polymers by time- and 10 space-resolved scanning Brillouin microscopy. Hypersonic properties are probed to reveal the subtle interplay between molecular transport, dissolution, polymerization and network defects in the vicinity of the interface between reactants, which are either pure epoxy resin or various epoxy resin-hardener mixtures, topped by a layer of pure hardener. The trans-interfacial polymerization produces heterogeneous epoxy structures of either gelatinous or glassy nature. Interestingly, the 15 hardener can easily penetrate and swell these networks and epoxy network fragments can be transported over several millimeters by convective flow. The observed features may be used to form interpenetrating networks during self-healing procedures.

Shelf life at room temperature and curing behaviour at elevated temperature are studied for hot-curing accelerated epoxies (EP, diglycidylether of bisphenol A plus dicyandiamide (Dicy)) by FTIR-spectroscopy and modulated DSC. The accelerator is added either directly or with nano-zeolite filler to the EP. Due to the immobilization of the accelerator in the pores of the nano-zeolite, the shelf life of this EP is 5 times longer than for the EP containing free accelerator. While the free accelerator acts during the whole heating step to curing temperature, the nano-zeolite does not release the accelerator before ca. 100 °C. As monitored by light microscopy, the released accelerator not only supports the curing but also stimulates the dissolution of the solid Dicy. As the result, network formation at 170 °C finishes within less than 25 minutes for the nano-filled EP.

Shelf life at room temperature and curing behaviour at elevated temperature are studied for hot-curing accelerated epoxies (EP, diglycidylether of bisphenol A plus dicyandiamide (Dicy)) by FTIR-spectroscopy and modulated DSC. The accelerator is added either directly or with nano-zeolite filler to the EP. Due to the immobilization of the accelerator in the pores of the nano-zeolite, the shelf life of this EP is 5 times longer than for the EP containing free accelerator. While the free accelerator acts during the whole heating step to curing temperature, the nano-zeolite does not release the accelerator before ca. 100 °C. As monitored by light microscopy, the released accelerator not only supports the curing but also stimulates the dissolution of the solid Dicy. As the result, network formation at 170 °C finishes within less than 25 minutes for the nano-filled EP.

Structural developments are investigated in network-forming reactive polymers by time- and 10 space-resolved scanning Brillouin microscopy. Hypersonic properties are probed to reveal the subtle interplay between molecular transport, dissolution, polymerization and network defects in the vicinity of the interface between reactants, which are either pure epoxy resin or various epoxy resin-hardener mixtures, topped by a layer of pure hardener. The trans-interfacial polymerization produces heterogeneous epoxy structures of either gelatinous or glassy nature. Interestingly, the 15 hardener can easily penetrate and swell these networks and epoxy network fragments can be transported over several millimeters by convective flow. The observed features may be used to form interpenetrating networks during self-healing procedures.

Epoxy formulations based on the multi-functional amine hardener, dicyandiamide (Dicy), regularly contain a free accelerator for reducing the curing temperature and the time needed to complete the network formation. Unfortunately, all accelerators reduce the shelf life of these adhesives at 25◦C. In order to solve this problem, accelerator-loaded zeolites fillers were developed, optimised with respect to host–guest interactions and characterised by Fraunhofer IFAM (Bremen, Germany) with regard to the release and curing behaviour in epoxy adhesive formulations. They are added to an epoxy adhesive (diglycidylether of bisphenol A (EP) and dicyandiamide (Dicy), mass ratio 100:6.7), stored at 25◦C in regular air or cured (heated with β = 10 K/min to 170◦C subsequent isothermal curing for 45 min). That shelf life and curing behaviour are investigated by FT-IR spectroscopy and modulated DSC. Compared to the EP containing free accelerator, the zeolite-filled EP possesses a threefold increase in shelf life at 25◦C due to the immobilization of the accelerator in the pores of the zeolites. While the free accelerator acts steadily during heating, it is shown that the loaded zeolite releases the accelerator at about 76◦C. Surprisingly, the released accelerator is not only involved in the chemical formation of the epoxy network but it accelerates the dissolution of Dicy considerably. As the result, network formation at 170◦C finishes after not more than 19 min and the starting temperature for curing could be reduced to 140◦C.

Epoxy formulations based on the multi-functional amine hardener, dicyandiamide (Dicy), regularly contain a free accelerator for reducing the curing temperature and the time needed to complete the network formation. Unfortunately, all accelerators reduce the shelf life of these adhesives at 25◦C. In order to solve this problem, accelerator-loaded zeolites fillers were developed, optimised with respect to host–guest interactions and characterised by Fraunhofer IFAM (Bremen, Germany) with regard to the release and curing behaviour in epoxy adhesive formulations. They are added to an epoxy adhesive (diglycidylether of bisphenol A (EP) and dicyandiamide (Dicy), mass ratio 100:6.7), stored at 25◦C in regular air or cured (heated with β = 10 K/min to 170◦C subsequent isothermal curing for 45 min). That shelf life and curing behaviour are investigated by FT-IR spectroscopy and modulated DSC. Compared to the EP containing free accelerator, the zeolite-filled EP possesses a threefold increase in shelf life at 25◦C due to the immobilization of the accelerator in the pores of the zeolites. While the free accelerator acts steadily during heating, it is shown that the loaded zeolite releases the accelerator at about 76◦C. Surprisingly, the released accelerator is not only involved in the chemical formation of the epoxy network but it accelerates the dissolution of Dicy considerably. As the result, network formation at 170◦C finishes after not more than 19 min and the starting temperature for curing could be reduced to 140◦C.

Epoxy formulations based on the multi-functional amine hardener, dicyandiamide (Dicy), regularly contain a free accelerator for reducing the curing temperature and the time needed to complete the network formation. Unfortunately, all accelerators reduce the shelf life of these adhesives at 25◦C. In order to solve this problem, accelerator-loaded zeolites fillers were developed, optimised with respect to host–guest interactions and characterised by Fraunhofer IFAM (Bremen, Germany) with regard to the release and curing behaviour in epoxy adhesive formulations. They are added to an epoxy adhesive (diglycidylether of bisphenol A (EP) and dicyandiamide (Dicy), mass ratio 100:6.7), stored at 25◦C in regular air or cured (heated with β = 10 K/min to 170◦C subsequent isothermal curing for 45 min). That shelf life and curing behaviour are investigated by FT-IR spectroscopy and modulated DSC. Compared to the EP containing free accelerator, the zeolite-filled EP possesses a threefold increase in shelf life at 25◦C due to the immobilization of the accelerator in the pores of the zeolites. While the free accelerator acts steadily during heating, it is shown that the loaded zeolite releases the accelerator at about 76◦C. Surprisingly, the released accelerator is not only involved in the chemical formation of the epoxy network but it accelerates the dissolution of Dicy considerably. As the result, network formation at 170◦C finishes after not more than 19 min and the starting temperature for curing could be reduced to 140◦C.