Search

Chirp sub-bottom profilers (SBP) provide centi-to-decimetre resolution, seismic data with applications for various geophysical and geological purposes. To verify the field application of imaging of a buried target with a cost-effective and easy-to-apply pseudo-3D Chirp SBP survey, we explored the buried site of an ancient wooden shipwreck off the west coast of Korea before underwater excavations. The survey was conducted using a commercial 2D Chirp SBP system with a newly devised recording system that preserved the true polarity of the chirp signal. To produce high-resolution 3D Chirp SBP data from 2D Chirp SBP datasets recorded by the novel system, an optimal data processing sequence, consisting of a first phase of 2D data processing and a second phase of 3D data processing was designed. The first, 2D phase, included the estimation of a source sweep signature, cross-correlation, and deconvolution using an inverse filter. The resulting resolution of the 2D Chirp SBP data was better than that of the enveloped data provided by the commercial acquisition system. The second phase of 3D data processing included gathering 3D datasets, redistributing of ping positions, and static correction. To improve the consistency of the seismic events and reduce the repetitive corrections (swell, tidal, tie, and residual corrections), a static correction was based on multi-beam echo sounder data. The amplitude variation near the shipwreck was clearly apparent in the time slice from the final pseudo-3D Chirp SBP dataset with a bin size of 2.0 m (crossline) × 0.6 m (inline). Through 3D rendering, the buried ancient shipwreck with dimensions of 5 m (width) × 12 m (length) × 2 m (depth) was imaged successfully.

Chirp sub-bottom profilers (SBP) provide centi-to-decimetre resolution, seismic data with applications for various geophysical and geological purposes. To verify the field application of imaging of a buried target with a cost-effective and easy-to-apply pseudo-3D Chirp SBP survey, we explored the buried site of an ancient wooden shipwreck off the west coast of Korea before underwater excavations. The survey was conducted using a commercial 2D Chirp SBP system with a newly devised recording system that preserved the true polarity of the chirp signal. To produce high-resolution 3D Chirp SBP data from 2D Chirp SBP datasets recorded by the novel system, an optimal data processing sequence, consisting of a first phase of 2D data processing and a second phase of 3D data processing was designed. The first, 2D phase, included the estimation of a source sweep signature, cross-correlation, and deconvolution using an inverse filter. The resulting resolution of the 2D Chirp SBP data was better than that of the enveloped data provided by the commercial acquisition system. The second phase of 3D data processing included gathering 3D datasets, redistributing of ping positions, and static correction. To improve the consistency of the seismic events and reduce the repetitive corrections (swell, tidal, tie, and residual corrections), a static correction was based on multi-beam echo sounder data. The amplitude variation near the shipwreck was clearly apparent in the time slice from the final pseudo-3D Chirp SBP dataset with a bin size of 2.0 m (crossline) × 0.6 m (inline). Through 3D rendering, the buried ancient shipwreck with dimensions of 5 m (width) × 12 m (length) × 2 m (depth) was imaged successfully.

A pseudo 3-D Chirp sub-bottom profiler (SBP) survey was conducted to define the extension of a fault that was previously identified on low-resolution 2-D seismic data with an emphasis on the shallow sedimentary layers and to determine if the fault extends to the seafloor. The geophysical survey was conducted as part of an environmental impact assessment for a proposed gas hydrate production test in the Ulleung Basin, East Sea. The Chirp SBP raw data were acquired over an area of 1 km × 1 km with an average line spacing of 20 m. To produce a 3-D Chirp SBP volume, we developed an optimal processing sequence that was divided into two steps. The first phase of 2-D data processing included a sweep signature estimation, correlation, deconvolution, swell effect correction, and migration. The second phase of 3-D data processing was composed of a bin design, bin gathering of the final processed 2-D data set, amplitude normalization, and residual statics correction. The 3-D Chirp SBP volume provides enhanced imaging especially due to the residual static processing using a moving average method and shows better continuity of the sedimentary layers and consistency of the reflection events than the individual 2-D lines. Deformation of the seafloor as a result of the fault was detected, and the fault offset increases in the deeper sedimentary layers. We also determined that the fault strikes northwest-southeast. However, the shallow sub-seafloor sediments have high porosities and therefore do not exhibit brittle fault-behavior but rather deform continuously due to fault movement.

A pseudo 3-D Chirp sub-bottom profiler (SBP) survey was conducted to define the extension of a fault that was previously identified on low-resolution 2-D seismic data with an emphasis on the shallow sedimentary layers and to determine if the fault extends to the seafloor. The geophysical survey was conducted as part of an environmental impact assessment for a proposed gas hydrate production test in the Ulleung Basin, East Sea. The Chirp SBP raw data were acquired over an area of 1 km × 1 km with an average line spacing of 20 m. To produce a 3-D Chirp SBP volume, we developed an optimal processing sequence that was divided into two steps. The first phase of 2-D data processing included a sweep signature estimation, correlation, deconvolution, swell effect correction, and migration. The second phase of 3-D data processing was composed of a bin design, bin gathering of the final processed 2-D data set, amplitude normalization, and residual statics correction. The 3-D Chirp SBP volume provides enhanced imaging especially due to the residual static processing using a moving average method and shows better continuity of the sedimentary layers and consistency of the reflection events than the individual 2-D lines. Deformation of the seafloor as a result of the fault was detected, and the fault offset increases in the deeper sedimentary layers. We also determined that the fault strikes northwest-southeast. However, the shallow sub-seafloor sediments have high porosities and therefore do not exhibit brittle fault-behavior but rather deform continuously due to fault movement.