Search

CuNiSi alloys are widely used in various mechanical and electrical applications. These group of materials, due to the phenomena of precipitation hardening, are able to obtain high mechanical properties with also relatively high electrical properties. In the article authors compare two different types of products, made from the CW111C alloy i.e. rods which were continuously cast on the horizontal laboratory casting set-up (low degree of structure refinement) and rods commercially extruded with high degree of structure refinement. The presented results of experimental work characterize the tested materials in terms of their chemical composition, mechanical and electrical properties depending on the manufacturing process, as well as reveal their structures and the effect of heat treatment on the morphology of the Ni-Si precipitates.

Cryoconite is a mixture of mineral and organic material covering glacial ice, playing important roles in biogeochemical cycles and lowering the albedo of a glacier's surface. Understanding the differences in structure of cryoconite across the globe can be important in recognizing past and future changes in supraglacial environments and ice-organisms-dust interactions. Despite the worldwide distribution and over a century of studies, the basic characteristics of cryoconite, including its forms and geochemistry, remain poorly studied. The major purpose of our study is the presentation and description of morphological diversity, chemical and photoautotrophs composition, and organic matter content of cryoconite sampled from 33 polar and mountain glaciers around the globe. Observations revealed that cryoconite included various morphologies including loose and granular forms. Granular cryoconite includes smooth, rounded, or irregularly shaped forms; with some having their surfaces covered by cyanobacteria filaments. The occurrence of granules increased with the organic matter content in cryoconite. Moreover, a major driver of cryoconite colouring was the concentration of organic matter and its interplay with minerals. The structure of cyanobacteria and algae communities in cryoconite differs between glaciers, but representatives of cyanobacteria families Pseudanabaenaceae and Phormidiaceae, and algae families Mesotaeniaceae and Ulotrichaceae were the most common. The most of detected cyanobacterial taxa are known to produce polymeric substances (EPS) that may cementing matter and form granules. Organic matter content in cryoconite varied between glaciers, ranging from 1% to >40%. The geochemistry of all the investigated samples reflected local sediment sources, except of highly concentrated Pb and Hg in cryoconite collected from European glaciers near industrialized regions, corroborating cryoconite as element-specific collectors and potential environmental indicator o

The article presents the research results of current cyclic thermal tests performed on enamelled aluminium wires connections, made with the use of a new type of Shark-Al quick-connectors. In particular, the main purpose of the conducted research was to analyse the effect of cyclic heating on the contact resistance change during the tests which allows to test the stability of the connections in simulated working conditions under current flow. Tests included a total of 300 thermal cycles, of which the first 200 were carried out to the 65 °C temperature measured in the connector at above the ambient temperature, and then additional 100 cycles were performed for the temperature of the connector at 140 °C (tolerance +5 °C). During the tests, the resistance of samples was monitored, which allowed to verify the correctness of performed connections.

The results of the current paper present the research concerning the obtaining of Cu-Ag alloys with wt. % of silver ranging between 5 and 20 % using continuous casting process. The process parameters have been introduced. Selected results regarding physical and mechanical properties of the casts have been discussed. Strength coefficients describing the plastic deformation range of the Cu-Ag alloys have been calculated using Hollomon’s equation. Additionally, in order to determine the influence of the temperature with Differential Scanning Calorimeter (DSC) on the electrical resistance, the values of temperature coefficients of resistance have been determined for all of the tested alloys.

Purpose: CheckMate 651 (ClinicalTrials.gov identifier: NCT02741570) evaluated first-line nivolumab plus ipilimumab versus EXTREME (cetuximab plus cisplatin/carboplatin plus fluorouracil ≤ six cycles, then cetuximab maintenance) in recurrent/metastatic squamous cell carcinoma of the head and neck (R/M SCCHN). Methods: Patients without prior systemic therapy for R/M SCCHN were randomly assigned 1:1 to nivolumab plus ipilimumab or EXTREME. Primary end points were overall survival (OS) in the all randomly assigned and programmed death-ligand 1 combined positive score (CPS) ≥ 20 populations. Secondary end points included OS in the programmed death-ligand 1 CPS ≥ 1 population, and progression-free survival, objective response rate, and duration of response in the all randomly assigned and CPS ≥ 20 populations. Results: Among 947 patients randomly assigned, 38.3% had CPS ≥ 20. There were no statistically significant differences in OS with nivolumab plus ipilimumab versus EXTREME in the all randomly assigned (median: 13.9 v 13.5 months; hazard ratio [HR], 0.95; 97.9% CI, 0.80 to 1.13; P = .4951) and CPS ≥ 20 (median: 17.6 v 14.6 months; HR, 0.78; 97.51% CI, 0.59 to 1.03; P = .0469) populations. In patients with CPS ≥ 1, the median OS was 15.7 versus 13.2 months (HR, 0.82; 95% CI, 0.69 to 0.97). Among patients with CPS ≥ 20, the median progression-free survival was 5.4 months (nivolumab plus ipilimumab) versus 7.0 months (EXTREME), objective response rate was 34.1% versus 36.0%, and median duration of response was 32.6 versus 7.0 months. Grade 3/4 treatment-related adverse events occurred in 28.2% of patients treated with nivolumab plus ipilimumab versus 70.7% treated with EXTREME. Conclusion: CheckMate 651 did not meet its primary end points of OS in the all randomly assigned or CPS ≥ 20 populations. Nivolumab plus ipilimumab showed a favorable safety profile compared with EXTREME. There continues to be a need for new therapies in patients with R/M SCCHN.

Aims The utility of clinical risk scores regarding the prediction of major adverse cardiac events (MACE) is uncertain. We aimed to directly compare the prognostic performance of five established clinical risk scores as well as an unstructured integrated clinical judgement (ICJ) of the treating emergency department (ED) physician. Methods and results Thirty-day MACE including all-cause death, life-threatening arrhythmia, cardiogenic shock, acute myocardial infarction (including the index event), and unstable angina requiring urgent coronary revascularization were centrally adjudicated by two independent cardiologists in patients presenting to the ED with acute chest discomfort in an international multicentre study. We compared the prognostic performance of the HEART score, GRACE score, T-MACS, TIMI score, and EDACS, as well as the unstructured ICJ of the treating ED physician (visual analogue scale to estimate the probability of acute coronary syndrome, ranging from 0 to 100). Among 4551 eligible patients, 1110/4551 patients (24.4%) had at least one MACE within 30 days. Prognostic accuracy was high and comparable for the HEART score, GRACE score, T-MACS, and ICJ [area under the receiver operating characteristic curve (AUC) 0.85–0.87] but significantly lower and only moderate for the TIMI score (AUC 0.79, P < 0.001) and EDACS (AUC 0.74, P < 0.001), resulting in sensitivities for the rule-out of 30-day MACE of 93–96, 87 (P < 0.001), and 72% (P < 0.001), respectively. Conclusion The HEART score, GRACE score, T-MACS, and unstructured ICJ of the treating physician, not the TIMI score or EDACS, performed well for the prediction of 30-day MACE and may be considered for routine clinical use. Trial registration ClinicalTrials.gov number NCT00470587

BACKGROUND We aimed to assess the diagnostic utility of the Dimension EXL LOCI High-Sensitivity Troponin I (hs-cTnI-EXL) assay. METHODS This multicenter study included patients with chest discomfort presenting to the emergency department. Diagnoses were centrally and independently adjudicated by two cardiologists using all available clinical information. Adjudication was performed twice including serial measurements of high-sensitivity cardiac troponin (hs-cTn) I-Architect (primary analysis) and serial measurements of hs-cTnT-Elecsys (secondary analysis) in addition to the clinically used (hs)-cTn. The primary objective was to assess and compare the discriminatory performance of hs-cTnI-EXL, hs-cTnI-Architect and hs-cTnT-Elecsys for acute myocardial infarction (MI). Furthermore, we derived and validated a hs-cTnI-EXL-specific 0/1h-algorithm. RESULTS Adjudicated MI was the diagnosis in 204/1454 (14%) patients. The area under the receiver operating characteristics curve for hs-cTnI-EXL was 0.94 (95%CI, 0.93-0.96), and comparable to hs-cTnI-Architect (0.95; 95%CI, 0.93-0.96) and hs-cTnT-Elecsys (0.93; 95%CI, 0.91-0.95). In the derivation cohort (n = 813), optimal criteria for rule-out of MI were <9ng/L at presentation (if chest pain onset >3h) or <9ng/L and 0h-1h-change <5ng/L, and for rule-in ≥160ng/L at presentation or 0h-1h-change ≥100ng/L. In the validation cohort (n = 345), these cut-offs ruled-out 56% of patients (negative predictive value 99.5% (95%CI, 97.1-99.9), sensitivity 97.8% (95%CI, 88.7-99.6)), and ruled-in 9% (positive predictive value 83.3% (95%CI, 66.4-92.7), specificity 98.3% (95%CI, 96.1-99.3)). Secondary analyses using adjudication based on hs-cTnT measurements confirmed the findings. CONCLUSIONS The overall performance of the hs-cTnI-EXL was comparable to best-validated hs-cTnT/I assays and an assay-specific 0/1h-algorithm safely rules out and accurately rules in acute MI. CLINICAL TRIAL REGISTRATION ClinicalTrials.gov number, NCT00470587.

This article is devoted to the comparison of changes in mechanical and electrical properties due to the applied deformation of copper and copper alloy rods. Bars from four different production technologies were deformed in the drawing process, including oxygen-free (OF) copper, electrolytic copper ETP, copper from cable granulate and silver copper with a high silver content up to 15 wt. % obtained in laboratory technology. The article presents the chemical purity, physical and electrical properties of rods before deformation. The summary of the research on the selected materials are changes in mechanical properties and electrical conductivity as a function of deformation up to 3,5 on a logarithmic scale and the coefficient of electromechanical efficiency WEM.

The article presents a material analysis for a new generation of cable screw connectors with shear bolts designed for not only 1st and 2nd class of cables but also 5tth class of aluminium and copper conductors that have not been previously supported. The set of properties of aluminium series 6xxx designated for screw connectors production has been determined. Finite Element Method (FEM) simulation of the controlled shear of the bolt at the body of the screw connector has been carried out. The repeatability of the bolt shear in the actual conditions was also conducted in order to verify the prototypes of the new generation of cable screw connectors.

The susceptibility to deep processing in the industrial wire drawing process has been investigated in the research paper regarding the copper grade influence on the process. The conducted research included the identification of the mechanical and electrical properties of wires manufactured from Electrolytic Tough Pitch Copper (Cu-ETP) wire rod and Oxygen-Free Copper (Cu-OF) cast rod in terms of the applied deformation. In particular, as main contribution of this research to the scientific and industrial community a mathematical model describing the wire strengthening and softening characteristics was determined.

Cu-Ag alloys may be used in the form of sheets for the construction of bitter type magnets. The paper presents results of laboratory studies on obtaining of ingots from Cu-(1÷7wt.%)Ag alloys, solution treatment and aging and rolling process. Has been shown influence of different heat treatment and plastic deformation on the mechanical and electrical properties. The microstructural analysis of castings and sheets with the use of scanning electron microscopy (SEM) is also presented.

The article presents the results of laboratory research on the production of multi-core superconducting wires. Multicore wires containing boron and magnesium powders in a copper matrix were obtained in the drawing process combined with intermediate heat treatment. The wires contains powder cores were sintered under high isostatic pressure to produce the MgB2 superconducting phase. The critical temperature for the composite’s superconducting state was determined. The macrostructure and energy dispersion (EDX) analysis of multi-core wires was also presented.

Research works presented in the article aim to determine optimal ratio of Mg and Si content in chemical composition of commercial EN-AW 6082 aluminium alloy in order to maximize mechanical properties of this material. Various amounts of Si (in the rage of 0,6-1,2 wt. %) and Mg (0,6-1,1 wt. %) along with 0,4 wt. % of Fe, 0,4 wt. % of Mn and 0,05 wt. % of Ti were metallurgically synthesised with the use of gravity die casting process which allowed to obtain 5 different castings. In the next phase of research works all alloys were subjected to mechanical and electrical properties testing in as cast temper and after performed heat treatment.

Cultured meat has potential to diversify methods for protein production, but innovations in production efficiency will be required to make cultured meat a feasible protein alternative. Microcarriers provide a strategy to culture sufficient volumes of adherent cells in a bioreactor that are required for meat products. However, cell culture on inedible microcarriers involves extra downstream processing to dissociate cells prior to consumption. Here, we present edible microcarriers that can support the expansion and differentiation of myogenic cells in a single bioreactor system. To fabricate edible microcarriers with a scalable process, we used water-in-oil emulsions as templates for gelatin microparticles. We also developed a novel embossing technique to imprint edible microcarriers with grooved topology in order to test if microcarriers with striated surface texture can promote myoblast proliferation and differentiation in suspension culture. In this proof-of-concept demonstration, we showed that edible microcarriers with both smooth and grooved surface topologies supported the proliferation and differentiation of mouse myogenic C2C12 cells in a suspension culture. The grooved edible microcarriers showed a modest increase in the proliferation and alignment of myogenic cells compared to cells cultured on smooth, spherical microcarriers. During the expansion phase, we also observed the formation of cell-microcarrier aggregates or microtissues for cells cultured on both smooth and grooved microcarriers. Myogenic microtissues cultured with smooth and grooved microcarriers showed similar characteristics in terms of myotube length, myotube volume fraction, and expression of myogenic markers. To establish feasibility of edible microcarriers for cultured meat, we showed that edible microcarriers supported the production of myogenic microtissue from C2C12 or bovine satellite muscle cells, which we harvested by centrifugation into a cookable meat patty that maintained it

The Shenandoah Valley of Virginia is filled with a number of small community and academic archives that work to preserve the rich history of a unique region. While these institutions are small, their work is mighty. Valley archives and their staff conduct numerous creative projects that combine best practices, a commitment to the community they serve, and a dedication to diverse voices. This session will feature a profile of three small archives from the Shenandoah Valley and three projects that launched to better serve the needs of their community. The institutions and the projects they will discuss are: • Bridgewater College Special Collections and the 2021 exhibit “State of Change: Civil Rights and the Virginia Constitution” that used primary sources to engage viewers with both local and state Black history. • Rocktown History and the project “Shape Note Traditions of the Shenandoah Valley” which reunited scattered musical collections from small archives throughout the Shenandoah Valley into a new, more accessible, digital format. • Shenandoah County Library’s Truban Archives and the “Bondage Biographies Project” which works to document the lives of enslaved persons in Shenandoah County through an online database.

AIMS: Cardiac myosin-binding protein C (cMyC) demonstrated high diagnostic accuracy for the early detection of non-ST-elevation myocardial infarction (NSTEMI). Its dynamic release kinetics may enable a 0/1h-decision algorithm that is even more effective than the ESC hs-cTnT/I 0/1 h rule-in/rule-out algorithm. METHODS AND RESULTS: In a prospective international diagnostic study enrolling patients presenting with suspected NSTEMI to the emergency department, cMyC was measured at presentation and after 1 h in a blinded fashion. Modelled on the ESC hs-cTnT/I 0/1h-algorithms, we derived a 0/1h-cMyC-algorithm. Final diagnosis of NSTEMI was centrally adjudicated according to the 4th Universal Definition of Myocardial Infarction. Among 1495 patients, the prevalence of NSTEMI was 17%. The optimal derived 0/1h-algorithm ruled-out NSTEMI with cMyC 0 h concentration below 10 ng/L (irrespective of chest pain onset) or 0 h cMyC concentrations below 18 ng/L and 0/1 h increase <4 ng/L. Rule-in occurred with 0 h cMyC concentrations of at least 140 ng/L or 0/1 h increase ≥15 ng/L. In the validation cohort (n = 663), the 0/1h-cMyC-algorithm classified 347 patients (52.3%) as 'rule-out', 122 (18.4%) as 'rule-in', and 194 (29.3%) as 'observe'. Negative predictive value for NSTEMI was 99.6% [95% confidence interval (CI) 98.9-100%]; positive predictive value 71.1% (95% CI 63.1-79%). Direct comparison with the ESC hs-cTnT/I 0/1h-algorithms demonstrated comparable safety and even higher triage efficacy using the 0h-sample alone (48.1% vs. 21.2% for ESC hs-cTnT-0/1 h and 29.9% for ESC hs-cTnI-0/1 h; P < 0.001). CONCLUSION: The cMyC 0/1h-algorithm provided excellent safety and identified a greater proportion of patients suitable for direct rule-out or rule-in based on a single measurement than the ESC 0/1h-algorithm using hs-cTnT/I. TRIAL REGISTRATION: ClinicalTrials.gov number, NCT00470587.

Describes an interdisciplinary investigation of air pollution in a school in which students wrote the proposals, set up experiments, analyzed their data, and formulated conclusions. (JRH)

Background: The diagnosis of cardiac syncope remains a challenge in the emergency department (ED). Objective: Assessing the diagnostic accuracy of the early standardized clinical judgement (ESCJ) including a standardized syncope-specific case report form (CRF) in comparison with a recommended multivariable diagnostic score. Methods: In a prospective international observational multicentre study, diagnostic accuracy for cardiac syncope of ESCJ by the ED physician amongst patients ≥ 40 years presenting with syncope to the ED was directly compared with that of the Evaluation of Guidelines in Syncope Study (EGSYS) diagnostic score. Cardiac syncope was centrally adjudicated independently of the ESCJ or conducted workup by two ED specialists based on all information available up to 1-year follow-up. Secondary aims included direct comparison with high-sensitivity cardiac troponin I (hs-cTnI) and B-type natriuretic peptide (BNP) concentrations and a Lasso regression to identify variables contributing most to ESCJ. Results: Cardiac syncope was adjudicated in 252/1494 patients (15.2%). The diagnostic accuracy of ESCJ for cardiac syncope as quantified by the area under the curve (AUC) was 0.87 (95% CI: 0.84–0.89), and higher compared with the EGSYS diagnostic score (0.73 (95% CI: 0.70–0.76)), hs-cTnI (0.77 (95% CI: 0.73–0.80)) and BNP (0.77 (95% CI: 0.74–0.80)), all P < 0.001. Both biomarkers (alone or in combination) on top of the ESCJ significantly improved diagnostic accuracy. Conclusion: ESCJ including a standardized syncope-specific CRF has very high diagnostic accuracy and outperforms the EGSYS score, hs-cTnI and BNP.

Background: The early non-invasive discrimination of Type 2 versus Type 1 Myocardial Infarction (T2MI, T1MI) is a major unmet clinical need. We aimed to externally validate a recently derived clinical score (Neumann) combing female sex, no radiating chest pain, and high-sensitivity cardiac troponin I (hs-cTnI) concentration ≤40.8 ng/L. Methods: Patients presenting with acute chest discomfort to the emergency department were prospectively enrolled into an international multicenter diagnostic study. The final diagnoses of T2MI and T1MI were centrally adjudicated by two independent cardiologists using all information including cardiac imaging and serial measurements of hs-cTnT/I according to the fourth universal definition of MI. Model performance for T2MI diagnosis was assessed by formal tests and graphical means of discrimination and calibration. Results: Among 6684 enrolled patients, MI was the adjudicated final diagnosis in 1079 (19%) patients, of which 242 (22%) had T2MI. External validation of the Neumann Score showed a moderate discrimination (C-statistic 0.67 (95%CI 0.64–0.71)). Model calibration showed underestimation of the predicted probabilities of having T2MI for low point scores. Model extension by adding the binary variable heart rate >120/min significantly improved model performance (C-statistic 0.73 (95% CI 0.70–0.76, p < 0.001) and had good calibration. Patients with the highest score values of 3 (Neumann Score, 9.9%) and 5 (Extended Neumann Score, 3.3%) had a 53% and 91% predicted probability of T2MI, respectively. Conclusion: The Neumann Score provided moderate discrimination and suboptimal calibration. Extending the Neumann Score by adding heart rate >120/min improved the model’s performance.

In the first part of the paper, we study the discontinuous Galerkin (DG) and $C^0$ interior penalty ($C^0$-IP) finite element approximation of the periodic strong solution to the fully nonlinear second-order Hamilton--Jacobi--Bellman--Isaacs (HJBI) equation with coefficients satisfying the Cordes condition. We prove well-posedness and perform abstract a posteriori and a priori analyses which apply to a wide family of numerical schemes. These periodic problems arise as the corrector problems in the homogenization of HJBI equations. The second part of the paper focuses on the numerical approximation to the effective Hamiltonian of ergodic HJBI operators via DG/$C^0$-IP finite element approximations to approximate corrector problems. Finally, we provide numerical experiments demonstrating the performance of the numerical schemes., Comment: 25 pages

Information on the flows of specific polymers through the anthroposphere forms the basis of any assessment of the environmental implications of plastic. This work presents a dynamic probabilistic material flow analysis of seven commodity thermoplastics: low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), polystyrene (PS), expanded polystyrene (EPS), polyvinylchloride (PVC), and polyethylene terephthalate (PET). The analysis examines nine product sectors and 35 product categories, including textiles, across Europe from 1950 to 2016. Total consumption of these seven polymers was 90.0 ± 4.8 kg/cap in 2016. The in-use stock that year was 47 kg/cap for LDPE, 81 kg/cap for HDPE, 81 kg/cap for PP, 21 kg/cap for PS, 56 kg/cap for EPS, 163 kg/cap for PVC, and 16 kg/cap for PET. For EPS and PVC, the fraction contained in the in-use stock is 51% and 39% of the total production. Landfill is the major compartment where LDPE, HDPE, PP, PS, and PET end up (48%–60%). Elimination—incineration and destruction in waste incineration plants—occurs for 15%–19% of LDPE, HDPE, PP, PS, and PET, and 10% of EPS and PVC. Current European recycling rates vary from 11% for PS to 33% for PET. The precise separation of different polymers into very detailed product categories will allow the formulation of future scenarios about interventions to improve the circularity of specific polymers and provide the basis to assess the polymer-specific releases to the environment.

Periods of nutrient shortage impose strong selection on animal populations. Experimental studies of genetic adaptation to nutrient shortage largely focus on resistance to acute starvation at adult stage; it is not clear how conclusions drawn from these studies extrapolate to other forms of nutritional stress. We studied the genomic signature of adaptation to chronic juvenile malnutrition in six populations of Drosophila melanogaster evolved for 150 generations on an extremely nutrient-poor larval diet. Comparison with control populations evolved on standard food revealed repeatable genomic differentiation between the two set of population, involving >3,000 candidate SNPs forming >100 independently evolving clusters. The candidate genomic regions were enriched in genes implicated in hormone, carbohydrate, and lipid metabolism, including some with known effects on fitness-related life-history traits. Rather than being close to fixation, a substantial fraction of candidate SNPs segregated at intermediate allele frequencies in all malnutrition-adapted populations. This, together with patterns of among-population variation in allele frequencies and estimates of Tajima’s D, suggests that the poor diet results in balancing selection on some genomic regions. Our candidate genes for tolerance to larval malnutrition showed a high overlap with genes previously implicated in acute starvation resistance. However, adaptation to larval malnutrition in our study was associated with reduced tolerance to acute adult starvation. Thus, rather than reflecting synergy, the shared genomic architecture appears to mediate an evolutionary trade-off between tolerances to these two forms of nutritional stress.

In light‐emitting electrochemical cells (LECs), the position of the emission zone (EZ) is not predefined via a multilayer architecture design, but governed by a complex motion of electrical and ionic charges. As a result of the evolution of doped charge transport layers that enclose a dynamic intrinsic region until steady state is reached, the EZ is often dynamic during turn‐on. For thick sandwich polymer LECs, a continuous change of the emission color provides a direct visual indication of a moving EZ. Results from an optical and electrical analysis indicate that the intrinsic zone is narrow at early times, but starts to widen during operation, notably well before the electrical device optimum is reached. Results from numerical simulations demonstrate that the only precondition for this event to occur is that the mobilities of anions (µa) and cations (µc) are not equal, and the direction of the EZ shift dictates µc > µa. Quantitative ion profiles reveal that the displacement of ions stops when the intrinsic zone stabilizes, confirming the relation between ion movement and EZ shift. Finally, simulations indicate that the experimental current peak for constant‐voltage operation is intrinsic and the subsequent decay does not result from degradation, as commonly stated.

Syftet med studien är att få en djupare förståelse för nätverkets betydelse i en internationaliseringsprocess. Detta görs genom att undersöka ett tillverkande företag med specialanpassade produkter och begränsad målgrupp. Genom att undersöka företagets affärsrelationer har vi kunnat identifiera hur företaget lyckats överkomma outsidership och etablera en nätverksposition på en ny marknad. Undersökningen gjordes med hjälp av intervjuer med personer som har varit direkt involverade i företagets expansion till Tyskland. Den viktigaste upptäckten för denna studie är att de 4 faserna för att överkomma outsidership är dynamiska. Detta innebär att företag kan befinna sig i en fas för att sedan komma tillbaka till en tidigare fas. Studien visar också att kombinationen av alla typer av relationer, såsom en mellanhand, informella och formella relationer, har varit nödvändiga för att överkomma psykiskt avstånd på den nya marknaden.

Effects of ion concentration and active layer thickness play a critical role on the performance of light‐emitting electrochemical cells. Expanding on a pioneering materials system comprising the super yellow (SY) polymer and the electrolyte trimethylolpropane ethoxylate (TMPE)/Li+CF3SO3−, it is reported that a slightly lowered salt concentration and layer thickness result in a substantial efficiency increase, and that this increase is confined to a narrow concentration and thickness range. For a film thickness of 70 nm, a blend ratio SY:TMPE:Li+CF3SO3− = 1:0.075:0.0225, and a current of 7.7 mA cm−2 the current efficacy is 11.6 cd A−1, on a par with SY light‐emitting diodes. The optimized salt content can be explained by increased exciton quenching at higher concentrations and hindered carrier injection and conduction at lower concentrations, while the optical dependence on the layer thickness is due to weak microcavity effects. A comprehensive optical modeling study is presented, which includes the doping‐induced changes of the refractive indices and self‐absorption losses due the emission–absorption overlap of intrinsic and doped SY. The analysis indicates either a thickness‐independent emitter position (EP) close to the anode or a thickness‐dependent EP, shifted to the cathode for increased thicknesses.

We provide a unified analysis of a posteriori and a priori error bounds for a broad class of discontinuous Galerkin and $C^0$-IP finite element approximations of fully nonlinear second-order elliptic Hamilton--Jacobi--Bellman and Isaacs equations with Cordes coefficients. We prove the existence and uniqueness of strong solutions in $H^2$ of Isaacs equations with Cordes coefficients posed on bounded convex domains. We then show the reliability and efficiency of computable residual-based error estimators for piecewise polynomial approximations on simplicial meshes in two and three space dimensions. We introduce an abstract framework for the a priori error analysis of a broad family of numerical methods and prove the quasi-optimality of discrete approximations under three key conditions of Lipschitz continuity, discrete consistency and strong monotonicity of the numerical method. Under these conditions, we also prove convergence of the numerical approximations in the small-mesh limit for minimal regularity solutions. We then show that the framework applies to a range of existing numerical methods from the literature, as well as some original variants. A key ingredient of our results is an original analysis of the stabilization terms. As a corollary, we also obtain a generalization of the discrete Miranda--Talenti inequality to piecewise polynomial vector fields.

We prove the convergence of adaptive discontinuous Galerkin and $C^0$-interior penalty methods for fully nonlinear second-order elliptic Hamilton--Jacobi--Bellman and Isaacs equations with Cordes coefficients. We consider a broad family of methods on adaptively refined conforming simplicial meshes in two and three space dimensions, with fixed but arbitrary polynomial degrees greater than or equal to two. A key ingredient of our approach is a novel intrinsic characterization of the limit space that enables us to identify the weak limits of bounded sequences of nonconforming finite element functions. We provide a detailed theory for the limit space, and also some original auxiliary functions spaces, that is of independent interest to adaptive nonconforming methods for more general problems, including Poincar\'e and trace inequalities, a proof of density of functions with nonvanishing jumps on only finitely many faces of the limit skeleton, approximation results by finite element functions and weak convergence results.

BACKGROUND: Until now, high-sensitivity cardiac troponin (hs-cTn) assays were mainly developed for large central laboratory platforms. OBJECTIVES: This study aimed to assess the clinical performance of a point-of-care (POC)-hs-cTnI assay in patients with suspected myocardial infarction (MI). METHODS: This study enrolled patients presenting to the emergency department with symptoms suggestive of MI. Two cardiologists centrally adjudicated the final diagnosis using all clinical data including cardiac imaging. The primary objective was to directly compare diagnostic accuracy of POC-hs-cTnI-TriageTrue versus best-validated central laboratory assays. Secondary objectives included the derivation and validation of a POC-hs-cTnI-TriageTrue-specific 0/1-h algorithm. RESULTS: MI was the adjudicated final diagnosis in 178 of 1,261 patients (14%). The area under the curve (AUC) for POC-hs-cTnI-TriageTrue at presentation was 0.95 (95% confidence interval [CI]: 0.93 to 0.96) and was at least comparable to hs-cTnT-Elecsys (AUC: 0.94; 95% CI: 0.93 to 0.96; p = 0.213) and hs-cTnI-Architect (AUC: 0.92; 95% CI: 0.90 to 0.93; p < 0.001). A single cutoff concentration <3 ng/l at presentation identified 45% of patients at low risk with a negative predictive value (NPV) of 100% (95% CI: 99.4% to 100%). A single cutoff concentration >60 ng/l identified patients at high risk with a positive predictive value (PPV) of 76.8% (95% CI: 68.9% to 83.6%). The 0/1-h algorithm ruled out 55% of patients (NPV: 100%; 95% CI: 98.8% to 100%), and ruled in 18% of patients (PPV: 76.8%; 95% CI: 67.2% to 84.7%). Ruled-out patients had cumulative event rates of 0% at 30 days and 1.6% at 2 years. This study confirmed these findings in a secondary analysis including hs-cTnI-Architect for central adjudication. CONCLUSIONS: The POC-hs-cTnI-TriageTrue assay provides high diagnostic accuracy in patients with suspected MI with a clinical performance that is at least comparable to that of best-validated central labora

We present in-situ neutron spin echo measurements on an entangled polydimethylsiloxane melt under shear and demonstrate the ability to monitor nano-scale dynamics in flowing liquids. We report no changes in the topological interactions of the chains for shear rates approaching the inverse longest relaxation time. Further experiments following along this line will allow to systematically test the predictions of theories, like e.g. convective constraint release.

Entangled polymers are deformed by a strong shear flow. The shape of the polymer, called the form factor, is measured by small angle neutron scattering. However, the real-space molecular structure is not directly available from the reciprocal-space data, due to the phase problem. Instead, the data has to be fitted with a theoretical model of the molecule. We approximate the unknown structure using piecewise straight segments, from which we derive an analytical form factor. We fit it to our data on a semi-dilute entangled polystyrene solution under in situ shear flow. The character of the deformation is shown to lie between that of a single ideal chain (viscous) and a cross-linked network (elastic rubber). Furthermore, we use the fitted structure to estimate the mechanical stress, and find a fairly good agreement with rheology literature.

A major efficiency limit for solution-processed perovskite optoelectronic devices, for example light-emitting diodes, is trap-mediated non-radiative losses. Defect passivation using organic molecules has been identified as an attractive approach to tackle this issue. However, implementation of this approach has been hindered by a lack of deep understanding of how the molecular structures influence the effectiveness of passivation. We show that the so far largely ignored hydrogen bonds play a critical role in affecting the passivation. By weakening the hydrogen bonding between the passivating functional moieties and the organic cation featuring in the perovskite, we significantly enhance the interaction with defect sites and minimize non-radiative recombination losses. Consequently, we achieve exceptionally high-performance near-infrared perovskite light-emitting diodes with a record external quantum efficiency of 21.6%. In addition, our passivated perovskite light-emitting diodes maintain a high external quantum efficiency of 20.1% and a wall-plug efficiency of 11.0% at a high current density of 200 mA cm−2, making them more attractive than the most efficient organic and quantum-dot light-emitting diodes at high excitations., Funding agencies: ERC Starting Grant [717026]; National Basic Research Program of China (973 Program) [2015CB932200]; National Natural Science Foundation of China [61704077, 51572016, 51721001, 61634001, 61725502, 91733302, U1530401]; Natural Science Foundation of Jiangsu

Solar cells based on metal halide perovskites are one of the most promising photovoltaic technologies(1-4). Over the past few years, the long-term operational stability of such devices has been greatly improved by tuning the composition of the perovskites(5-9), optimizing the interfaces within the device structures(10-13), and using new encapsulation techniques(14,15). However, further improvements are required in order to deliver a longer-lasting technology. Ion migration in the perovskite active layer-especially under illumination and heat-is arguably the most difficult aspect to mitigate(16-18). Here we incorporate ionic liquids into the perovskite film and thence into positive-intrinsic-negative photovoltaic devices, increasing the device efficiency and markedly improving the long-term device stability. Specifically, we observe a degradation in performance of only around five per cent for the most stable encapsulated device under continuous simulated full-spectrum sunlight for more than 1,800 hours at 70 to 75 degrees Celsius, and estimate that the time required for the device to drop to eighty per cent of its peak performance is about 5,200 hours. Our demonstration of long-term operational, stable solar cells under intense conditions is a key step towards a reliable perovskite photovoltaic technology., Funding Agencies|UK Engineering and Physical Sciences Research Council (EPSRC) [EP/M015254/2, EP/M024881/1]; European Research Council (ERC) [717026]; Swedish Research Council Vetenskapsradet [330-2014-6433]; European Commission Marie Sklodowska-Curie action [INCA 600398]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [SFO-Mat-LiU 2009-00971]; European Union [763977]; China Scholarship Council (CSC); Bavarian State Ministry of Science, Research, and the Arts; German Research Foundation (DFG); Swiss National Science Foundation [cr23i2-162828]

Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2018., Cataloged from PDF version of thesis., Includes bibliographical references., The Future Heritage Lab at the Massachusetts Institute of Technology has been working with residents of the Azraq refugee camp to develop projects that address the issues of everyday life within the camp. One prevalent problem is the lack of access to water. It is often the duty of children to hike through the desert sands in order to fill their jugs with water and lug them back home for their families. In order to address this issue, this thesis explores means of constructing carts for carrying water. The cart will serve both as a tool for transporting water, and as an object of play for those who use it. Through its design and construction, people in the camp will learn valuable lessons in engineering and gain hands on experience using the tools to build it. Materiality is an important factor in the development of the cart. One model will be constructed at MIT as a proof of concept from PVC pipe and bicycle components, then the final versions will be comprised entirely of scrap bike frames and other components from within the camp. On top of its water carrying capability, the cart will also serve as a cultural object. One of the greatest struggles within these refugee crises is how heritage and culture can be preserved and celebrated through displacement. With that in mind, this portion of the cart will include history lessons and references to pre-Islamic mythology, in order to inspire a cultural symbolism to be integrated into the design of the carts., by Anthony Ray Kawecki., S.B.

Aims It is unknown whether cardiac syncope, and possibly also other syncope aetiologies exhibit circadian, weekly, seasonal, and temperature-dependent patterns. Methods and results We prospectively recorded the exact time, date, and outside temperature of syncope of patients >40 years old presenting with syncope to the emergency department in a diagnostic multicentre study. Two independent cardiologists/emergency physicians adjudicated the final diagnosis based on all information becoming available during clinical work-up including 1-year follow-up. Among 1230 patients, the adjudicated aetiology was cardiac in 14.6%, reflex in 39.2%, orthostatic in 25.7%, other non-cardiac in 9.7%, and unknown in 10.8% of patients. All syncope aetiologies occurred much more frequently during the day when compared with the night (P < 0.01). While reflex and orthostatic syncope showed a broad peak of prevalence with 80.9% of these events occurring between 4 am and 4 pm, cardiac syncope showed a narrow peak of prevalence with 70.1% of all events occurring between 8 am and 2 pm. A weekly pattern was present for most syncope aetiologies, with events occurring mainly from Monday to Friday (P < 0.01). Reflex syncope displayed a seasonal rhythm and was more common in winter (P < 0.01), while cardiac syncope stayed constant over the year. Syncope occurred most often when the outside temperature was coldest. Overall the patterns observed for cardiac syncope were similar to the patterns observed for its differential diagnosis. Conclusion Syncope aetiologies in patients >40 years old display circadian, weekly, seasonal, and temperature-dependent patterns. Unfortunately, these patterns do not allow to reliably differentiate cardiac syncope from other aetiologies.

Background: The prevalence of pulmonary embolism (PE) in patients presenting with syncope to the emergency department (ED) is largely unknown. This information, however, is necessary to balance the potential medical benefit or harm of systematic PE screening in patients presenting with syncope to the ED. Objectives: This study sought to determine the prevalence of PE in patients with syncope. Methods: Unselected patients presenting with syncope to the ED were prospectively enrolled in a diagnostic multicenter study. Pre-test clinical probability for PE was assessed using the 2-level Wells score and the results of D-dimer testing using age-adapted cutoffs. Presence of PE was evaluated by imaging modalities, when ordered as part of the clinical assessment by the treating ED physician or by long-term follow-up data. Results: Long-term follow-up was complete in 1,380 patients (99%) at 360 days and 1,156 patients (83%) at 720 days. Among 1,397 patients presenting with syncope to the ED, PE was detected at presentation in 19 patients (1.4%; 95% confidence interval [CI]: 0.87% to 2.11%). The incidence of new PEs or cardiovascular death during 2-year follow-up was 0.9% (95% CI: 0.5% to 1.5%). In the subgroup of patients hospitalized (47%), PE was detected at presentation in 15 patients (2.3%; 95% CI: 1.4% to 3.7%). The incidence of new PEs or cardiovascular death during 2-year follow-up was 0.9% (95% CI: 0.4% to 2.0%). Conclusions: PE seems to be a rather uncommon cause of syncope among patients presenting to the ED. Therefore, systematic PE-screening in all patients with syncope does not seem warranted. (BAsel Syncope EvaLuation Study [BASEL IX]; NCT01548352)

Objective Patients with suspected acute myocardial infarction (AMI) in the setting of left bundle branch block (LBBB) present an important diagnostic and therapeutic challenge to the clinician. Methods We prospectively evaluated the incidence of AMI and diagnostic performance of specific ECG and high-sensitivity cardiac troponin (hs-cTn) criteria in patients presenting with chest discomfort to 26 emergency departments in three international, prospective, diagnostic studies. The final diagnosis of AMI was centrally adjudicated by two independent cardiologists according to the universal definition of myocardial infarction. Results Among 8830 patients, LBBB was present in 247 (2.8%). AMI was the final diagnosis in 30% of patients with LBBB, with similar incidence in those with known LBBB versus those with presumably new LBBB (29% vs 35%, p=0.42). ECG criteria had low sensitivity (1%-12%) but high specificity (95%-100%) for AMI. The diagnostic accuracy as quantified by the receiver operating characteristics (ROC) curve of hs-cTnT and hs-cTnI concentrations at presentation (area under the ROC curve (AUC) 0.91, 95% CI 0.85 to 0.96 and AUC 0.89, 95% CI 0.83 to 0.95), as well as that of their 0/1-hour and 0/2-hour changes, was very high. A diagnostic algorithm combining ECG criteria with hs-cTnT/I concentrations and their absolute changes at 1 hour or 2 hours derived in cohort 1 (45 of 45(100%) patients with AMI correctly identified) showed high efficacy and accuracy when externally validated in cohorts 2 and 3 (28 of 29 patients, 97%). Conclusion Most patients presenting with suspected AMI and LBBB will be found to have diagnoses other than AMI. Combining ECG criteria with hs-cTnT/I testing at 0/1 hour or 0/2 hours allows early and accurate diagnosis of AMI in LBBB. Trial registration number APACE: NCT00470587; ADAPT: ACTRN12611001069943; TRAPID-AMI: RD001107;Results.

BACKGROUND We aimed to derive and externally validate a 0/2-h algorithm using the high-sensitivity cardiac troponin I (hs-cTnI)-Access assay. METHODS We enrolled patients presenting to the emergency department with symptoms suggestive of acute myocardial infarction (AMI) in 2 prospective diagnostic studies using central adjudication. Two independent cardiologists adjudicated the final diagnosis, including all available medical information including cardiac imaging. hs-cTnI-Access concentrations were measured at presentation and after 2 h in a blinded fashion. RESULTS AMI was the adjudicated final diagnosis in 164 of 1131 (14.5%) patients in the derivation cohort. Rule-out by the hs-cTnI-Access 0/2-h algorithm was defined as 0-h hs-cTnI-Access concentration <4 ng/L in patients with an onset of chest pain >3 h (direct rule-out) or a 0-h hs-cTnI-Access concentration <5 ng/L and an absolute change within 2 h <5 ng/L in all other patients. Derived thresholds for rule-in were a 0-h hs-cTnI-Access concentration ≥50 ng/L (direct rule-in) or an absolute change within 2 h ≥20 ng/L. In the derivation cohort, these cutoffs ruled out 55% of patients with a negative predictive value (NPV) of 99.8% (95% CI, 99.3–100) and sensitivity of 99.4% (95% CI, 96.5–99.9), and ruled in 30% of patients with a positive predictive value (PPV) of 73% (95% CI, 66.1–79). In the validation cohort, AMI was the adjudicated final diagnosis in 88 of 1280 (6.9%) patients. These cutoffs ruled out 77.9% of patients with an NPV of 99.8% (95% CI, 99.3–100) and sensitivity of 97.7% (95% CI, 92.0–99.7), and ruled in 5.8% of patients with a PPV of 77% (95% CI, 65.8–86) in the validation cohort. CONCLUSIONS Safety and efficacy of the l hs-cTnI-Access 0/2-h algorithm for triage toward rule-out or rule-in of AMI are very high.

The aim of this study was to evaluate selected parameters of strain and rotation of the left ventricle (the basal rotation (BR) index, the basal circumferential strain (BCS) index, and the global longitudinal strain (GLS) of the left ventricle) in male athletes with physiological cardiac hypertrophy (LVH group), and athletes (non-LVH group) and non-athletes without hypertrophy (control group, CG). They were evaluated using transthoracic echocardiography and speckle tracking echocardiography before and after an incremental exercise test. The LVH group demonstrated lower BR at rest than the non-LVH group ( < 0.05) and the CG ( < 0.05). Physical effort had no effect on BR, nor was this effect different between groups ( > 0.05). There was a combined influence of LVH and physical effort on BR (F = 5.70; < 0.05) and BCS (F = 4.97; < 0.05), but no significant differences in BCS and GLS at rest between the groups. A higher BCS and lower GLS after exercise in the LVH group were demonstrated in comparison with the CG ( < 0.05). Left ventricular basal rotation as well as longitudinal and circumferential strains showed less of a difference between rest and after physical effort in subjects with significant myocardial hypertrophy. In conclusion, the obtained results may suggest that echocardiographic assessment of basal rotation and circumferential strain of the left ventricular can be important in predicting cardiac disorders caused by physical effort in individuals with physiological and pathological heart hypertrophy.

The aim of the present study was to examine the acute effect of an ultra-endurance performance on N-terminal pro-brain natriuretic peptide (NT-proBNP), cardiac specific troponin T (cTnT), creatinine kinase-myocardial band (CK-MB), high sensitive C-reactive protein (hsCRP), ischemia modified albumin (IMA), heart-type fatty acid binding protein (H-FABP) and cardiovascular function. Cardiac biomarkers were evaluated in 14 male ultra-marathoners (age 40 ± 12 years) during a 24 h ultra-marathon at five points (i.e., Pre-race; Marathon, 12-h run, 24-h run, and 48-h post-race). All subjects underwent baseline echocardiography assessment at least 10 days prior to the ultra-marathon and 48 h post-race. The average distance covered during the race was 149.4 ± 33.0 km. Running the ultra-marathon led to a progressive increase in hsCRP and H-FABP concentrations ( < 0.001). CK-MB and cTnT levels were higher after a 24-h run compared to pre-race ( < 0.05). Diastolic function was altered post-race characterized by a reduction in peak early to late diastolic filling ( < 0.01). Running an ultra-marathon significantly stimulates specific cardiac biomarkers; however, the dynamic of secretion of biomarkers linked to myocardium ischemia were differentially regulated during the ultra-marathon race. It is suggested that both exercise duration and intensity play a crucial role in cardiovascular adaptive mechanisms and cause risk of cardiac stress in ultra-marathoners.

The on-surface synthesis of bisheptahelicene by Ullmann coupling of 9-bromoheptahelicene on Au(111) and its temperature-induced dehydrogenation is studied using temperature-programmed reaction spectroscopy and time-of-flight secondary ion mass spectrometry. Specific dehydrogenation products of bisheptahelicene after loss of 6, 8 and 10 hydrogen atoms are identified, corresponding to molecules having undergone Diels–Alder transformations and intramolecular C–C coupling reactions. By combining with atomic hydrogen produced by dehydrogenation, the Ullmann coupling side-product bromine desorbs as HBr. H2 desorption emerges only after all Br has desorbed. Such characteristic behavior is explained by a kinetic model which explicitly considers the coverage of transient atomic H on the surface. Heating experiments performed with saturated layers of different Br-containing molecules reveal that the onset of HBr desorption depends strictly on the dehydrogenation step and therefore on the structure of the molecules.

In addition to its critical role in lysosomes for catabolism of sialoglycoconjugates, NEU1 is expressed at the plasma membrane and regulates a myriad of receptors by desialylation, playing a key role in many pathophysiological processes. Here, we developed a proteomic approach dedicated to the purification and identification by LC-MS/MS of plasma membrane NEU1 interaction partners in human macrophages. Already known interaction partners were identified as well as several new candidates such as the class B scavenger receptor CD36. Interaction between NEU1 and CD36 was confirmed by complementary approaches. We showed that elastin-derived peptides (EDP) desialylate CD36 and that this effect was blocked by the V14 peptide, which blocks the interaction between bioactive EDP and the elastin receptor complex (ERC). Importantly, EDP also increased the uptake of oxidized LDL by macrophages that is blocked by both the V14 peptide and the sialidase inhibitor 2-deoxy-2,3-didehydro-N-acetylneuraminic acid (DANA). These results demonstrate, for the first time, that binding of EDP to the ERC indirectly modulates CD36 sialylation level and regulates oxidized LDL uptake through this sialidase. These effects could contribute to the previously reported proatherogenic role of EDP and add a new dimension in the regulation of biological processes through NEU1.

In this paper we conduct a priori and a posteriori error analysis of the $C^0$ interior penalty method for Hamilton-Jacobi-Bellman equations, with coefficients that satisfy the Cordes condition. These estimates show the quasi-optimality of the method, and provide one with an adaptive finite element method. In accordance with the proven regularity theory, we only assume that the solution of the Hamilton-Jacobi-Bellman equation belongs to $H^2$., Comment: 21 pages, 4 figures, 8 tables

Acid-base equilibria of carboxylic acids and alkyl amines in the aqueous surface region were studied using surface-sensitive X-ray photoelectron spectroscopy and molecular dynamics simulations. Solutions of these organic compounds were examined as a function of pH, concentration and chain length to investigate the distribution of acid and base form in the surface region as compared to the aqueous bulk. Results from these experiments show that the neutral forms of the studied acid-base pairs are strongly enriched in the aqueous surface region. Moreover, we show that for species with at least four carbon atoms in their alkyl-chain, their charged forms are also found to be abundant in the surface region. Using a combination of XPS and MD results, a model is proposed that effectively describes the surface composition. Resulting absolute surface concentration estimations show clearly that the total organic mole fractions in the surface region change drastically as a function of solution pH. The origin of the observed surface phenomena, hydronium/hydroxide concentrations in the aqueous surface region and why standard chemical equations, used to describe equilibria in dilute bulk solution are not valid in the aqueous surface region, are discussed in detail. The reported results are of considerable importance especially for the detailed understanding of properties of small aqueous droplets that can be found in the atmosphere.

Nutrient supply to ecosystems has major effects on ecological diversity, but it is unclear to what degree the shape of this relationship is general versus dependent on the specific environment or community. Although the diet composition in terms of the source or proportions of different nutrient types is known to affect gut microbiota composition, the relationship between the quantity of nutrients supplied and the abundance and diversity of the intestinal microbial community remains to be elucidated. Here, we address this relationship using replicate populations of Drosophila melanogaster maintained over multiple generations on three diets differing in the concentration of yeast (the only source of most nutrients). While a 6.5-fold increase in yeast concentration led to a 100-fold increase in the total abundance of gut microbes, it caused a major decrease in their alpha diversity (by 45-60% depending on the diversity measure). This was accompanied by only minor shifts in the taxonomic affiliation of the most common operational taxonomic units (OTUs). Thus, nutrient concentration in host diet mediates a strong negative relationship between the nutrient abundance and microbial diversity in the Drosophila gut ecosystem.

A major challenge during the engineering of voluminous bone tissues is to maintain cell viability in the central regions of the construct. In vitro prevascularization of bone substitutes relying on endothelial cell bioprinting has the potential to resolve this issue and to replicate the native bone microvasculature. Laser-assisted bioprinting (LAB) commonly uses biological layers of hydrogel, called 'biopapers', to support patterns of printed cells and constitute the basic units of the construct. The self-assembly approach of tissue engineering allows the production of biomimetic cell-derived bone extracellular matrix including living cells. We hypothesized that self-assembled osseous sheets can serve as living biopapers to support the LAB of human endothelial cells and thus guide tubule-like structure formation. Human umbilical vein endothelial cells were bioprinted on the surface of the biopapers following a predefined pattern of lines. The osseous biopapers showed relevant matrix mineralization and pro-angiogenic hallmarks. Our results revealed that formation of tubule-like structures was favored when the cellular orientation within the biopaper was parallel to the printed lines. Altogether, we validated that human osseous cell sheets can be used as biopapers for LAB, allowing the production of human prevascularized cell-based osseous constructs that can be relevant for autologous bone repair applications.