Search

Proxima b is a rocky exoplanet in the habitable zone of the nearest star system and a key test case in the search for extraterrestrial life. Here, we investigate the characterization of a potential Earth-like atmosphere around Proxima b in reflected light via molecule mapping, combining high-resolution spectroscopy (HRS) and high contrast imaging, using the first-generation integral field spectrograph, High Angular Resolution Monolithic Optical and Near-infrared Integral field spectrograph (HARMONI), on the 39-m Extremely Large Telescope (ELT). We simulate comprehensive observations of Proxima b at an assumed 45° inclination using HARMONI's High Contrast Adaptive Optics mode, with spatial resolution (spaxel-1) and spectral resolving power R ≃ 17 000 between 1.538-, containing the spectral features of water, carbon dioxide, and methane. Tellurics, stellar features, and additional noise sources are included, and removed using established molecule mapping techniques. We find that HARMONI's current focal plane mask (FPM) is too large and obscures the orbit of Proxima b and thus explore smaller and offset FPMs to yield a detection. An detection of Proxima b's reflected light, suitable for atmospheric characterization, is possible with such modifications, requiring a minimum of 20 h, but ideally at least 30 h of integration time. We highlight that such detections do not scale with the photon noise, hence suitably detailed simulations of future instruments for the ELTs are needed to fully understand their ability to perform HRS observations of exoplanet atmospheres. Alterations to the HARMONI FPM design are feasible at this stage, but must be considered in context of other science cases.

Proxima b is a rocky exoplanet in the habitable zone of the nearest star system and a key test case in the search for extraterrestrial life. Here, we investigate the characterization of a potential Earth-like atmosphere around Proxima b in reflected light via molecule mapping, combining high resolution spectroscopy (HRS) and high contrast imaging, using the first-generation integral field spectrograph HARMONI on the $39$-m Extremely Large Telescope. We simulate comprehensive observations of Proxima b at an assumed $45^{\circ}$ inclination using HARMONI's High Contrast Adaptive Optics mode, with spatial resolution $\sim 8$mas ($3.88$mas/spaxel) and spectral resolving power $R\simeq17,000$ between $1.538$--$1.678 \mu m$, containing the spectral features of water, carbon dioxide and methane. Tellurics, stellar features, and additional noise sources are included, and removed using established molecule mapping techniques. We find that HARMONI's current focal plane mask (FPM) is too large and obscures the orbit of Proxima b and thus explore smaller and offset FPMs to yield a detection. A $\rm{S/N}=5$ detection of Proxima b's reflected light, suitable for atmospheric characterisation, is possible with such modifications, requiring a minimum of $20$ hours, but ideally at least $30$ hours of integration time. We highlight that such detections do not scale with the photon noise, hence suitably detailed simulations of future instruments for the ELTs are needed to fully understand their ability to perform HRS observations of exoplanet atmospheres. Alterations to the HARMONI FPM design are feasible at this stage, but must be considered in context of other science cases., Comment: 14 pages, 9 figures, accepted to MNRAS

The detection and characterization of Earth-like exoplanets around Sun-like stars is a primary science motivation for the Habitable Worlds Observatory. However, the current best technology is not yet advanced enough to reach the 10^-10 contrasts at close angular separations and at the same time remain insensitive to low-order aberrations, as would be required to achieve high-contrast imaging of exo-Earths. Photonic technologies could fill this gap, potentially doubling exo-Earth yield. We review current work on photonic coronagraphs and investigate the potential of hybridized designs which combine both classical coronagraph designs and photonic technologies into a single optical system. We present two possible systems. First, a hybrid solution which splits the field of view spatially such that the photonics handle light within the inner working angle and a conventional coronagraph that suppresses starlight outside it. Second, a hybrid solution where the conventional coronagraph and photonics operate in series, complementing each other and thereby loosening requirements on each subsystem. As photonic technologies continue to advance, a hybrid or fully photonic coronagraph holds great potential for future exoplanet imaging from space., Comment: Conference Proceedings of SPIE: Techniques and Instrumentation for Detection of Exoplanets XI, vol. 12680 (2023)

Looking to the future of exo-Earth imaging from the ground, core technology developments are required in visible extreme adaptive optics (ExAO) to enable the observation of atmospheric features such as oxygen on rocky planets in visible light. UNDERGROUND (Ultra-fast AO techNology Determination for Exoplanet imageRs from the GROUND), a collaboration built in Feb. 2023 at the Optimal Exoplanet Imagers Lorentz Workshop, aims to (1) motivate oxygen detection in Proxima Centauri b and analogs as an informative science case for high-contrast imaging and direct spectroscopy, (2) overview the state of the field with respect to visible exoplanet imagers, and (3) set the instrumental requirements to achieve this goal and identify what key technologies require further development., Comment: SPIE Proceeding: 2023 / 12680-67

NASA is engaged in planning for a Habitable Worlds Observatory (HabWorlds), a coronagraphic space mission to detect rocky planets in habitable zones and establish their habitability. Surface liquid water is central to the definition of planetary habitability. Photometric and polarimetric phase curves of starlight reflected by an exoplanet can reveal ocean glint, rainbows and other phenomena caused by scattering by clouds or atmospheric gas. Direct imaging missions are optimised for planets near quadrature, but HabWorlds' coronagraph may obscure the phase angles where such optical features are strongest. The range of accessible phase angles for a given exoplanet will depend on the planet's orbital inclination and/or the coronagraph's inner working angle (IWA). We use a recently-created catalog relevant to HabWorlds of 164 stars to estimate the number of exo-Earths that could be searched for ocean glint, rainbows, and polarization effects due to Rayleigh scattering. We find that the polarimetric Rayleigh scattering peak is accessible in most of the exo-Earth planetary systems. The rainbow due to water clouds at phase angles of ${\sim}20-60^\circ$ would be accessible with HabWorlds for a planet with an Earth equivalent instellation in ${\sim}{46}$ systems, while the ocean glint signature at phase angles of ${\sim}130-170^\circ$ would be accessible in ${\sim}{16}$ systems, assuming an IWA${=}62$ mas ($3\lambda/D$). Improving the IWA${=}41$ mas ($2\lambda/D$) increases accessibility to rainbows and glints by factors of approximately 2 and 3, respectively. By observing these scattering features, HabWorlds could detect a surface ocean and water cycle, key indicators of habitability., Comment: MNRAS accepted, 9 pages, 8 figures, 3 tables

A near-IR high-resolution, R=80000 spectrometer has been developed at IPAG to directly characterize the atmosphere of exoplanets using adaptive optics (AO) assisted telescopes, and a single-mode fiber-injection unit. A first technical test with the 200' Hale telescope at Palomar Observatory occurred in March 2022 using the PALM3000 AO system offered by this telescope. Observations have also been made at the same time with the PARVI spectrometer so that a direct comparison can be made between the two instruments. This spectrometer uses a virtually imaged phased array (VIPA) instead of an echelle grating, resulting in a very compact optical layout that fits in a 0.25m3 cryostat. Using a quarter of an H2RG detector, the spectrometer analyses the middle part of the H-band, from 1.57 to 1.7 microns for 2 sources whose light is transferred from the telescope to the spectrometer using single-mode fibers. By design, the transmission of the spectrometer is expected to be 40-50%, which is 2-3 times higher than the transmission of current high-resolution spectrometers such as CRIRES+ and NIRSPEC. A damaged cross-disperser limited it to 21%, however. A replacement grating with a correct, twice as high efficiency has been procured after the on-sky demonstration. In addition to recalling the main specifications of the VIPA spectrometer, this paper presents the control software, the calibration process, and the reduction pipeline that have been developed for the instrument. It also presents the results of the on-sky technical test with the Hale telescope, as well as measurements of the effective resolution and transmission, along with a comparison of a spectrum of the sun obtained with the spectrometer with the BASS2000 reference spectrum. Planned modifications are also discussed. That includes the integration of a new dedicated H2RG detector, and of K-band optics.

The combination of high-contrast imaging and medium to high spectral resolution spectroscopy offers new possibilities for the detection and characterization of exoplanets. The molecular mapping technique uses the difference between the planetary and stellar spectra. While traditional post-processing techniques are quickly limited by speckle noise at short angular separation, it efficiently suppresses speckles. Its performance depends on multiple parameters such as the star magnitude, the adaptive optics residual halo, the companion spectrum, the telluric absorption, as well as the telescope and instrument properties. Exploring this parameter space through end-to-end simulations to predict potential science cases and to optimize future instrument designs is very time-consuming, making it difficult to draw conclusions. We propose to define an efficient methodology for such an analysis. Explicit expressions of the estimates of signal and noise are derived, and they are validated through comparisons with end-to-end simulations. They provide an understanding of the instrumental dependencies, and help to discuss optimal instrumental choices with regard to the targets of interest. They are applied in the case of ELT/HARMONI, as a tool to predict the contrast performance in various observational cases. We confirm the potential of molecular mapping for high-contrast detections, especially for cool planets at short separations. We provide guidelines based on quantified estimates for design trade-offs of future instruments. We discuss the planet detection performances of HARMONI observing modes. While they nicely cover the appropriate requirements for high detection capability of warm exoplanets, a transmission extended down to J band would be beneficial. A contrast of a few 1E-7 at 50mas should be within reach on bright targets in photon noise regime with molecular mapping., Comment: 19 pages

Direct imaging and spectroscopy of Earth-like planets and young Jupiters require contrasts up to 10^6-10^10 at angular separations of a few dozen milliarcseconds. To achieve this goal, one of the most promising approaches consists of using large segmented primary mirror telescopes with coronagraphic instruments. However, coronagraphs are highly sensitive to wavefront errors. The segmentation itself is responsible for phasing errors and segment vibrations to be controlled at a subnanometric accuracy. We propose an innovative method for a coronagraph design that allows a consequent relaxation of the segment phasing constraints for low segment-count mirrors and generates an instrument that is more robust to segment-level wavefront errors. It is based on an optimization of the coronagraph that includes a segment-level apodization. This is repeated over the pupil to match the segmentation redundancy and improves the contrast stability beyond the minimum separation set by the single-segment diffraction limit. We validate this method on a GMT-like pupil for two coronagraph types: apodized pupil Lyot coronagraphs (APLC) and apodizing phase plate coronagraphs (APP). For the APLC, redundant apodization enables releasing the piston phasing constraints by a factor of 5 to 20 compared to classical designs. For the APP, the contrast remains almost constant up to 1 radian RMS of the phasing errors. We also show that redundant apodizations increase the robustness of the coronagraph to segment tip-tilt errors, as well as to missing segments. This method cannot be applied to higher-segment count mirrors such as the ELT or the TMT, but it is particularly suitable for low segment-count mirrors (fewer than 20 segments) such as the GMT aperture. These mirrors aim for high-contrast imaging of debris disks or exoplanets down to 100 mas., Comment: 11 pages, 17 figures

ELT-HARMONI is the first light visible and near-IR integral field spectrograph (IFS) for the ELT. It covers a large spectral range from 450nm to 2450nm with resolving powers from 3500 to 18000 and spatial sampling from 60mas to 4mas. It can operate in two Adaptive Optics modes - SCAO (including a High Contrast capability) and LTAO - or with NOAO. The project is preparing for Final Design Reviews. The High Contrast Module (HCM) will allow HARMONI to perform direct imaging and spectral analysis of exoplanets up to one million times fainter than their host star. Quasi-static aberrations are a limiting factor and must be calibrated as close as possible to the focal plane masks to reach the specified contrast. A Zernike sensor for Extremely Low-level Differential Aberrations (ZELDA) will be used in real-time and closed-loop operation at 0.1Hz frequency for this purpose. Unlike a Shack-Hartmann, the ZELDA wavefront sensor is sensitive to Island and low-wind effects. The ZELDA sensor has already been tested on VLT-SPHERE and will be used in other instruments. Our objective is to adapt this sensor to the specific case of HARMONI. A ZELDA prototype is being both simulated and experimentally tested at IPAG. Its nanometric precision has first been checked in 2020 in the case of slowly evolving, small wavefront errors, and without dispersion nor turbulence residuals. On this experimental basis, we address the performance of the sensor under realistic operational conditions including residuals, mis-centring, dispersion, sensitivity, etc. Atmospheric refraction residuals were introduced by the use of a prism, and turbulence was introduced by a spatial light modulator which is also used to minimise wavefront residuals in a closed loop in the observing conditions expected with HARMONI., Comment: 14 pages, 13 figures, SPIE Astronomical Telescopes + Instrumentation (AS22)

Oncoming exoplanet spectro-imagers like the Planetary Camera and Spectrograph (PCS) for the Extremely Large Telescope (ELT) will aim for a new class of exoplanets, including Earth-like planets evolving around M dwarfs i.e., closer than 0.1'' with contrasts around 10^-8. This can be achieved with coronagraphs to modulate the wavefront. Classical coronagraphs are not optimal: 1) they impose a planetary photon loss, which is particularly problematic when the instrument includes a high spectral-resolution spectrograph, 2) some aberrations such as the missing segments of the ELT are dynamic and not compatible with a static coronagraph design, 3) the coupling of the exoplanet image with a fiber for spectroscopy only requires the electric field to be controlled on a small region of the detector. Such instruments would benefit from an adaptive tool to modulate the wavefront in both amplitude and phase. We propose to combine in the pupil plane a deformable mirror (DM) to control the phase and a digital micro-mirror device (DMD) i.e., an array made of 1920*1080 micro-mirrors able to switch between two positions, to control its amplitude. If the DM is already well-known in the field in particular for adaptive optics applications, the DMD has so far not been fully considered. At IPAG, we are currently assembling a testbed called CIDRE (Coronagraphy for DiRect Imaging of Exoplanets) to develop, test, calibrate, and validate the combination of these two components with a Lyot coronagraph. Since March 2022, CIDRE is assembled albeit without the Lyot coronagraph yet. The first few months have been dedicated to the calibration of the DMD. Since May 2022, it is operational and used to test dynamic amplitude apodization coronagraphs (so-called Shaped Pupils). This proceeding presents the set up of the CIDRE testbench and the first experimental results on adaptive Shaped Pupils obtained with the DMD., Comment: 10 pages, 7 figures

The imaging and characterization of a larger range of exoplanets, down to young Jupiters and exo-Earths will require accessing very high contrasts at small angular separations with an increased robustness to aberrations, three constraints that drive current instrumentation development. This goal relies on efficient coronagraphs set up on extremely large diameter telescopes such as the Thirty Meter Telescope (TMT), the Giant Magellan Telescope (GMT), or the Extremely Large Telescope (ELT). However, they tend to be subject to specific aberrations that drastically deteriorate the coronagraph performance: their primary mirror segmentation implies phasing errors or even missing segments, and the size of the telescope imposes large spiders, generating low-wind effect as already observed on the Very Large Telescope (VLT)/SPHERE instrument or at the Subaru telescope, or adaptive-optics-due petaling, studied in simulations in the ELT case. The ongoing development of coronagraphs has then to take into account their sensitivity to such errors. We propose an innovative method to generate coronagraphs robust to primary mirror phasing errors and low-wind and adaptive-optics-due petaling effect. This method is based on the apodization of the segment or petal instead of the entire pupil, this apodization being then repeated to mimic the pupil redundancy. We validate this so-called Redundant Apodized Pupil (RAP) method on a James Webb Space Telescope-like pupil composed of 18 hexagonal segments segments to align, and on the VLT architecture in the case of residual low-wind effect., Comment: 13 pages, 10 figures

Telescope pupil fragmentation from spiders generates specific aberrations observed at various telescopes and expected on the large telescopes under construction. This so-called island effect induces differential pistons, tips and tilts on the pupil petals, deforming the instrumental PSF, and is one of the main limitations to the detection of exoplanets with high-contrast imaging. These aberrations have different origins such as the low-wind effect or petaling errors in the adaptive-optics reconstruction. In this paper, we propose to alleviate the impact of the aberrations induced by island effects on high-contrast imaging by adapting the coronagraph design in order to increase its robustness to petal-level aberrations. Following a method first developed for errors due to primary mirror segmentation (segment phasing errors, missing segments...), we develop and test Redundant Apodized Pupils (RAP), i.e. apodizers designed at the petal-scale, then duplicated and rotated to mimic the pupil petal geometry. We apply this concept to the ELT architecture, made of six identical petals, to yield a 10^-6 contrast in a dark region from 8 to 40lambda/D. Both amplitude and phase apodizers proposed in this paper are robust to differential pistons between petals, with minimal degradation to their coronagraphic PSFs and contrast levels. In addition, they are also more robust to petal-level tip-tilt errors than apodizers designed for the whole pupil, with which the limit of contrast of 10^-6 in the coronagraph dark zone is achieved for constraints up to 2 rad RMS of these petal-level modes. The RAP concept proves its robustness to island effects (low-wind effect and post-adaptive optics petaling), with an application to the ELT architecture. It can also be considered for other 8- to 30-meter class ground-based units such as VLT/SPHERE, Subaru/SCExAO, GMT/GMagAO-X, or TMT/PSI., Comment: 11 pages, 15 figures, accepted in A&A

Direct imaging and spectroscopy of Earth-like planets and young Jupiters require contrasts up to 10^6-10^10 at angular separations of a few dozen milliarcseconds. To achieve this goal, one of the most promising approaches consists of using large segmented primary mirror telescopes with coronagraphic instruments. However, coronagraphs are highly sensitive to wavefront errors. The segmentation itself is responsible for phasing errors and segment vibrations to be controlled at a subnanometric accuracy. We propose an innovative method for a coronagraph design that allows a consequent relaxation of the segment phasing constraints for low segment-count mirrors and generates an instrument that is more robust to segment-level wavefront errors. It is based on an optimization of the coronagraph that includes a segment-level apodization. This is repeated over the pupil to match the segmentation redundancy and improves the contrast stability beyond the minimum separation set by the single-segment diffraction limit. We validate this method on a GMT-like pupil for two coronagraph types: apodized pupil Lyot coronagraphs (APLC) and apodizing phase plate coronagraphs (APP). For the APLC, redundant apodization enables releasing the piston phasing constraints by a factor of 5 to 20 compared to classical designs. For the APP, the contrast remains almost constant up to 1 radian RMS of the phasing errors. We also show that redundant apodizations increase the robustness of the coronagraph to segment tip-tilt errors, as well as to missing segments. This method cannot be applied to higher-segment count mirrors such as the ELT or the TMT, but it is particularly suitable for low segment-count mirrors (fewer than 20 segments) such as the GMT aperture. These mirrors aim for high-contrast imaging of debris disks or exoplanets down to 100 mas., Comment: 11 pages, 17 figures

Giant exoplanets on wide orbits have been directly imaged around young stars. If the thermal background in the mid-infrared can be mitigated, then exoplanets with lower masses can also be imaged. Here we present a ground-based mid-infrared observing approach that enables imaging low-mass temperate exoplanets around nearby stars, and in particular within the closest stellar system, alpha Centauri. Based on 75-80% of the best quality images from 100h of cumulative observations, we demonstrate sensitivity to warm sub-Neptune-sized planets throughout much of the habitable zone of alpha Centauri A. This is an order of magnitude more sensitive than state-of-the-art exoplanet imaging mass detection limits. We also discuss a possible exoplanet or exozodiacal disk detection around alpha Centauri A. However, an instrumental artifact of unknown origin cannot be ruled out. These results demonstrate the feasibility of imaging rocky habitable-zone exoplanets with current and upcoming telescopes. Imaging of low-mass exoplanets can be achieved once the thermal background in the mid-infrared (MIR) wavelengths can be mitigated. Here, the authors present a ground-based MIR observing approach enabling imaging low-mass temperate exoplanets around nearby stars.

Giant exoplanets on wide orbits have been directly imaged around young stars. If the thermal background in the mid-infrared can be mitigated, then exoplanets with lower masses can also be imaged. Here we present a ground-based mid-infrared observing approach that enables imaging low-mass temperate exoplanets around nearby stars, and in particular within the closest stellar system, alpha Centauri. Based on 75-80% of the best quality images from 100h of cumulative observations, we demonstrate sensitivity to warm sub-Neptune-sized planets throughout much of the habitable zone of alpha Centauri A. This is an order of magnitude more sensitive than state-of-the-art exoplanet imaging mass detection limits. We also discuss a possible exoplanet or exozodiacal disk detection around alpha Centauri A. However, an instrumental artifact of unknown origin cannot be ruled out. These results demonstrate the feasibility of imaging rocky habitable-zone exoplanets with current and upcoming telescopes. Imaging of low-mass exoplanets can be achieved once the thermal background in the mid-infrared (MIR) wavelengths can be mitigated. Here, the authors present a ground-based MIR observing approach enabling imaging low-mass temperate exoplanets around nearby stars.

Giant exoplanets on wide orbits have been directly imaged around young stars. If the thermal background in the mid-infrared can be mitigated, then exoplanets with lower masses can also be imaged. Here we present a ground-based mid-infrared observing approach that enables imaging low-mass temperate exoplanets around nearby stars, and in particular within the closest stellar system, alpha Centauri. Based on 75-80% of the best quality images from 100h of cumulative observations, we demonstrate sensitivity to warm sub-Neptune-sized planets throughout much of the habitable zone of alpha Centauri A. This is an order of magnitude more sensitive than state-of-the-art exoplanet imaging mass detection limits. We also discuss a possible exoplanet or exozodiacal disk detection around alpha Centauri A. However, an instrumental artifact of unknown origin cannot be ruled out. These results demonstrate the feasibility of imaging rocky habitable-zone exoplanets with current and upcoming telescopes. Imaging of low-mass exoplanets can be achieved once the thermal background in the mid-infrared (MIR) wavelengths can be mitigated. Here, the authors present a ground-based MIR observing approach enabling imaging low-mass temperate exoplanets around nearby stars.

The direct detection of exoplanets with high-contrast instruments can be boosted with high spectral resolution. For integral field spectrographs yielding hyperspectral data, this means that the field of view consists of diffracted starlight spectra and a spatially localized planet. Analysis usually relies on cross-correlation with theoretical spectra. In a purely blind-search context, this supervised strategy can be biased with model mismatch and/or be computationally inefficient. Using an approach that is inspired by the remote-sensing community, we aim to propose an alternative to cross-correlation that is fully data-driven, which decomposes the data into a set of individual spectra and their corresponding spatial distributions. This strategy is called spectral unmixing. We used an orthogonal subspace projection to identify the most distinct spectra in the field of view. Their spatial distribution maps were then obtained by inverting the data. These spectra were then used to break the original hyperspectral images into their corresponding spatial distribution maps via non-negative least squares. The performance of our method was evaluated and compared with a cross-correlation using simulated hyperspectral data with medium resolution from the ELT/HARMONI integral field spectrograph. We show that spectral unmixing effectively leads to a planet detection solely based on spectral dissimilarities at significantly reduced computational cost. The extracted spectrum holds significant signatures of the planet while being not perfectly separated from residual starlight. The sensitivity of the supervised cross-correlation is three to four times higher than with unsupervised spectral unmixing, the gap is biased toward the former because the injected and correlated spectrum match perfectly. The algorithm was furthermore vetted on real data obtained with VLT/SINFONI of the beta Pictoris system., Comment: 13 pages, 8 figures

Combining high-contrast imaging with medium-resolution spectroscopy has been shown to significantly boost the direct detection of exoplanets. HARMONI, one of the first-light instruments to be mounted on ESO's ELT, will be equipped with a single-conjugated adaptive optics system to reach the diffraction limit of the ELT in H and K bands, a high-contrast module dedicated to exoplanet imaging, and a medium-resolution (up to R = 17 000) optical and near-infrared integral field spectrograph. Combined together, these systems will provide unprecedented contrast limits at separations between 50 and 400 mas. In this paper, we estimate the capabilities of the HARMONI high-contrast module for the direct detection of young giant exoplanets. We use an end-to-end model of the instrument to simulate observations based on realistic observing scenarios and conditions. We analyze these data with the so-called "molecule mapping" technique combined to a matched-filter approach, in order to disentangle the companions from the host star and tellurics, and increase the S/N of the planetary signal. We detect planets above 5-sigma at contrasts up to 16 mag and separations down to 75 mas in several spectral configurations of the instrument. We show that molecule mapping allows the detection of companions up to 2.5 mag fainter compared to state-of-the-art high-contrast imaging techniques based on angular differential imaging. We also demonstrate that the performance is not strongly affected by the spectral type of the host star, and that we reach close sensitivities for the best three quartiles of observing conditions at Armazones, which means that HARMONI could be used in near-critical observations during 60 to 70% of telescope time at the ELT. Finally, we simulate planets from population synthesis models to further explore the parameter space that HARMONI and its high-contrast module will soon open., Comment: Accepted for publication in A&A (14 pages, 9 figures)

The direct detection of exoplanets with high-contrast instruments can be boosted with high spectral resolution. For integral field spectrographs yielding hyperspectral data, this means that the field of view consists of diffracted starlight spectra and a spatially localized planet. Analysis usually relies on cross-correlation with theoretical spectra. In a purely blind-search context, this supervised strategy can be biased with model mismatch and/or be computationally inefficient. Using an approach that is inspired by the remote-sensing community, we aim to propose an alternative to cross-correlation that is fully data-driven, which decomposes the data into a set of individual spectra and their corresponding spatial distributions. This strategy is called spectral unmixing. We used an orthogonal subspace projection to identify the most distinct spectra in the field of view. Their spatial distribution maps were then obtained by inverting the data. These spectra were then used to break the original hyperspectral images into their corresponding spatial distribution maps via non-negative least squares. The performance of our method was evaluated and compared with a cross-correlation using simulated hyperspectral data with medium resolution from the ELT/HARMONI integral field spectrograph. We show that spectral unmixing effectively leads to a planet detection solely based on spectral dissimilarities at significantly reduced computational cost. The extracted spectrum holds significant signatures of the planet while being not perfectly separated from residual starlight. The sensitivity of the supervised cross-correlation is three to four times higher than with unsupervised spectral unmixing, the gap is biased toward the former because the injected and correlated spectrum match perfectly. The algorithm was furthermore vetted on real data obtained with VLT/SINFONI of the beta Pictoris system., Comment: 13 pages, 8 figures

Combining high-contrast imaging with medium-resolution spectroscopy has been shown to significantly boost the direct detection of exoplanets. HARMONI, one of the first-light instruments to be mounted on ESO's ELT, will be equipped with a single-conjugated adaptive optics system to reach the diffraction limit of the ELT in H and K bands, a high-contrast module dedicated to exoplanet imaging, and a medium-resolution (up to R = 17 000) optical and near-infrared integral field spectrograph. Combined together, these systems will provide unprecedented contrast limits at separations between 50 and 400 mas. In this paper, we estimate the capabilities of the HARMONI high-contrast module for the direct detection of young giant exoplanets. We use an end-to-end model of the instrument to simulate observations based on realistic observing scenarios and conditions. We analyze these data with the so-called "molecule mapping" technique combined to a matched-filter approach, in order to disentangle the companions from the host star and tellurics, and increase the S/N of the planetary signal. We detect planets above 5-sigma at contrasts up to 16 mag and separations down to 75 mas in several spectral configurations of the instrument. We show that molecule mapping allows the detection of companions up to 2.5 mag fainter compared to state-of-the-art high-contrast imaging techniques based on angular differential imaging. We also demonstrate that the performance is not strongly affected by the spectral type of the host star, and that we reach close sensitivities for the best three quartiles of observing conditions at Armazones, which means that HARMONI could be used in near-critical observations during 60 to 70% of telescope time at the ELT. Finally, we simulate planets from population synthesis models to further explore the parameter space that HARMONI and its high-contrast module will soon open., Comment: Accepted for publication in A&A (14 pages, 9 figures)

Current high-resolution spectrometers have been designed for seeing-limited sources. Designing a spectrometer for diffraction-limited sources makes it possible to significantly improves its compacity and cost, but it also opens up new concepts, including better efficiency, and adaptability to various spectral domains, and up to very high resolution (several 10⁵). A novel, near-IR, R~80000 spectrometer has been developed at IPAG to characterize two sources at once in the H or K bands. Its design is based on a virtually imaged phased array instead of an échelle grating, which allows the spectrometer to fit inside a 0.2 m³ cryostat, and results in a gain in throughput with respect to usual échelle spectrographs. One specific science case that can benefit from this new type of design is the characterization of exoplanets' atmosphere. This paper presents the results of its test in the laboratory, as well as the preparation for an on-sky demonstration tentatively scheduled for summer 2020.

Medium-resolution integral-field spectrographs (IFS) coupled with adaptive-optics such as Keck/OSIRIS, VLT/MUSE, or SINFONI are appearing as a new avenue for enhancing the detection and characterization capabilities of young, gas giant exoplanets at large heliocentric distances (>5 au). We analyzed K-band VLT/SINFONI medium-resolution (R_lambda~5577) observations of the young giant exoplanet HIP 65426 b. Our dedicated IFS data analysis toolkit (TExTRIS) optimized the cube building, star registration, and allowed for the extraction of the planet spectrum. A Bayesian inference with the nested sampling algorithm coupled with the self-consistent forward atmospheric models BT-SETTL15 and Exo-REM using the ForMoSA tool yields Teff=1560 +/- 100K, log(g)<4.40dex, [M/H]=0.05 +/- 0.22dex, and an upper limit on the C/O ratio (<0.55). The object is also re-detected with the so-called "molecular mapping" technique. The technique yields consistent atmospheric parameters, but the loss of the planet pseudo-continuum in the process degrades or modifies the constraints on these parameters. The solar to sub-solar C/O ratio suggests an enrichment by solids at formation if the planet was formed beyond the water snowline (>20 au) by core-accretion. However, a formation by gravitational instability can not be ruled out. The metallicity is compatible with the bulk enrichment of massive Jovian planets from the Bern planet population models. Finally, we measure a radial velocity of 26 +/- 15km/s compatible with our revised measurement on the star. This is the fourth imaged exoplanet for which a radial velocity can be evaluated, illustrating the potential of such observations for assessing the coevolution of imaged systems belonging to star forming regions, such as HIP 65426., Comment: 21 pages, 16 figures, 3 Appendix

Several Extreme Adaptive Optics (XAO) systems dedicated to the detection and characterisation of the exoplanets are currently in operation for 8-10 meter class telescopes. Coronagraphs are commonly used in these facilities to reject the diffracted light of an observed star and enable direct imaging and spectroscopy of its circumstellar environment. SHARK-NIR is a coronagraphic camera that will be implemented at the Large Binocular Telescope (LBT). After an extensive simulation campaign, SHARK-NIR team selected a suite of coronagraphic techniques to be implemented in the instrument in order to fulfil the scientific requirements. In summary, the Gaussian Lyot coronagraph is the option to serve all those science cases requiring field-stabilization and moderate contrast. Observations in pupil-stabilized mode to search for exoplanets can take advantage of three Shaped Pupil masks (SPC) and a Four-Quadrant Phase Mask (FQPM) coronagraph. The SPC are designed for high contrast on a small field close to the star and are robust to image and pupil jitter. The FQPM allows to access the entire scientific FoV (18''x18'') and delivers excellent performance in ideal conditions (high Strehl ratios), but performance is still good, both close and further away from the star, even at lower Strehl and with moderate vibrations. After the procurement phase, the coronagraphic masks were delivered to our labs and we started to test their performance on the optical bench and define the alignment procedures that will be employed in the final integration of the instrument in our cleaning room. In this article, we describe the tests that we performed in the lab with SHARK-NIR coronagraphs. We measured the contrast achievable with each technique in very-high Strehl conditions and defined the alignment-integration procedures.

HiCAT is a high-contrast imaging testbed designed to provide complete solutions in wavefront sensing, control and starlight suppression with complex aperture telescopes. The pupil geometry of such observatories includes primary mirror segmentation, central obstruction, and spider vanes, which make the direct imaging of habitable worlds very challenging. The testbed alignment was completed in the summer of 2014, exceeding specifications with a total wavefront error of 12nm rms over a 18mm pupil. The installation of two deformable mirrors for wavefront control is to be completed in the winter of 2015. In this communication, we report on the first testbed results using a classical Lyot coronagraph. We also present the coronagraph design for HiCAT geometry, based on our recent development of Apodized Pupil Lyot Coronagraph (APLC) with shaped-pupil type optimizations. These new APLC-type solutions using two-dimensional shaped-pupil apodizer render the system quasi-insensitive to jitter and low-order aberrations, while improving the performance in terms of inner working angle, bandpass and contrast over a classical APLC., Comment: 12 pages, 10 figures, Proceedings of the SPIE, Volume 9605, id. 96050I 12 pp. (2015)

Exoplanet imaging and spectroscopy are now routinely achieved by dedicated instruments on large ground-based observatories (e.g. Gemini/GPI, VLT/SPHERE, or Subaru/SCExAO). In addition to extreme adaptive optics (ExAO) and post-processing methods, these facilities make use of the most advanced coronagraphs to suppress light of an observed star and enable the observation of circumstellar environments. The Apodized Pupil Lyot Coronagraph (APLC) is one of the leading coronagraphic baseline in the current generation of instruments. This concept combines a pupil apodization, an opaque focal plane mask (FPM), and a Lyot stop. APLC can be optimized for a range of applications and designs exist for on-axis segmented aperture telescopes at $10^{10}$ contrast in broadband light. In this communication, we propose novel designs to push the limits of this concept further by modifying the nature of the FPM from its standard opaque mask to a smaller size occulting spot surrounded by circular phase shifting zones. We present the formalism of this new concept which solutions find two possible applications: 1) upgrades for the current generation of ExAO coronagraphs since these solutions remain compatible with the existing designs and will provide better inner working angle, contrast and throughput, and 2) coronagraphy at $10^{10}$ contrast for future flagship missions such as LUVOIR, with the goal to increase the throughput of the existing designs for the observation of Earth-like planets around nearby stars., Comment: 10 pages, 3 figures

Exoplanet imaging and spectroscopy are now routinely achieved by dedicated instruments on large ground-based observatories (e.g. Gemini/GPI, VLT/SPHERE, or Subaru/SCExAO). In addition to extreme adaptive optics (ExAO) and post-processing methods, these facilities make use of the most advanced coronagraphs to suppress light of an observed star and enable the observation of circumstellar environments. The Apodized Pupil Lyot Coronagraph (APLC) is one of the leading coronagraphic baseline in the current generation of instruments. This concept combines a pupil apodization, an opaque focal plane mask (FPM), and a Lyot stop. APLC can be optimized for a range of applications and designs exist for on-axis segmented aperture telescopes at $10^{10}$ contrast in broadband light. In this communication, we propose novel designs to push the limits of this concept further by modifying the nature of the FPM from its standard opaque mask to a smaller size occulting spot surrounded by circular phase shifting zones. We present the formalism of this new concept which solutions find two possible applications: 1) upgrades for the current generation of ExAO coronagraphs since these solutions remain compatible with the existing designs and will provide better inner working angle, contrast and throughput, and 2) coronagraphy at $10^{10}$ contrast for future flagship missions such as LUVOIR, with the goal to increase the throughput of the existing designs for the observation of Earth-like planets around nearby stars., Comment: 10 pages, 3 figures

HiCAT is a high-contrast imaging testbed designed to provide complete solutions in wavefront sensing, control and starlight suppression with complex aperture telescopes. The pupil geometry of such observatories includes primary mirror segmentation, central obstruction, and spider vanes, which make the direct imaging of habitable worlds very challenging. The testbed alignment was completed in the summer of 2014, exceeding specifications with a total wavefront error of 12nm rms over a 18mm pupil. The installation of two deformable mirrors for wavefront control is to be completed in the winter of 2015. In this communication, we report on the first testbed results using a classical Lyot coronagraph. We also present the coronagraph design for HiCAT geometry, based on our recent development of Apodized Pupil Lyot Coronagraph (APLC) with shaped-pupil type optimizations. These new APLC-type solutions using two-dimensional shaped-pupil apodizer render the system quasi-insensitive to jitter and low-order aberrations, while improving the performance in terms of inner working angle, bandpass and contrast over a classical APLC., Comment: 12 pages, 10 figures, Proceedings of the SPIE, Volume 9605, id. 96050I 12 pp. (2015)

High-resolution spectroscopy is a key element for present and future astronomical instrumentation. In particular, coupled to high contrast imagers and coronagraphs, high spectral resolution enables higher contrast and has been identified as a very powerful combination to characterise exoplanets, starting from giant planets now, up to Earth-like planet eventually for the future instruments. In this context, we propose the implementation of an innovative echelle spectrometer based on the use of VIPA (Virtually Imaged Phased Array, Shirasaki 1996). The VIPA itself is a particular kind of Fabry-Perot interferometer, used as an angular disperser with much greater dispersive power than common diffraction grating. The VIPA is an efficient, small component (3 cm x 2.4 cm), that takes the very advantage of single mode injection in a versatile design. The overall instrument presented here is a proof-of-concept of a compact, high-resolution (R > 80 000) spectrometer, dedicated to the H and K bands, in the context of the project High-Dispersion Coronagrahy developed at IPAG. The optical bench has a foot-print of 40 cm x 26 cm ; it is fed by two Single-Mode Fibers (SMF), one dedicated to the companion, and one to the star and/or to a calibration channel, and is cooled down to 80 K. This communication first presents the scientific and instrumental context of the project, and the principal merit of single-mode operations in high-resolution spectrometry. After recalling the physical structure of the VIPA and its implementation in an echelle-spectrometer design, it then details the optical design of the spectrometer. In conclusion, further steps (integration, calibration, coupling with adaptive optics) and possible optimization are briefly presented. Keywords: Echelle Spectrometer, High Spectral Resolution, Exoplanets, High-Dispersion Coronography, Infrared, Adaptive Optics, SPHERE

SHARK-NIR is one of the two coronagraphic instruments proposed for the Large Binocular Telescope. Together with SHARK-VIS (performing coronagraphic imaging in the visible domain), it will offer the possibility to do binocular observations combining direct imaging, coronagraphic imaging and coronagraphic low resolution spectroscopy in a wide wavelength domain, going from 0.5{\mu}m to 1.7{\mu}m. Additionally, the contemporary usage of LMIRCam, the coronagraphic LBTI NIR camera, working from K to L band, will extend even more the covered wavelength range. In January 2017 SHARK-NIR underwent a successful final design review, which endorsed the instrument for construction and future implementation at LBT. We report here the final design of the instrument, which foresees two intermediate pupil planes and three focal planes to accomodate a certain number of coronagraphic techniques, selected to maximize the instrument contrast at various distances from the star. Exo-Planets search and characterization has been the science case driving the instrument design, but the SOUL upgrade of the LBT AO will increase the instrument performance in the faint end regime, allowing to do galactic (jets and disks) and extra-galactic (AGN and QSO) science on a relatively wide sample of targets, normally not reachable in other similar facilities., Comment: 8 pages, 6 figures, AO4ELT5 conference proceedings

The Optimal Optical CoronagraphWorkshop at the Lorentz Center in September 2017 in Leiden, the Netherlands gathered a diverse group of 25 researchers working on exoplanet instrumentation to stimulate the emergence and sharing of new ideas. This contribution is the final part of a series of three papers summarizing the outcomes of the workshop, and presents an overview of novel optical technologies and systems that are implemented or considered for high-contrast imaging instruments on both ground-based and space telescopes. The overall objective of high contrast instruments is to provide direct observations and characterizations of exoplanets at contrast levels as extreme as 10^-10. We list shortcomings of current technologies, and identify opportunities and development paths for new technologies that enable quantum leaps in performance. Specifically, we discuss the design and manufacturing of key components like advanced deformable mirrors and coronagraphic optics, and their amalgamation in "adaptive coronagraph" systems. Moreover, we discuss highly integrated system designs that combine contrast-enhancing techniques and characterization techniques (like high-resolution spectroscopy) while minimizing the overall complexity. Finally, we explore extreme implementations using all-photonics solutions for ground-based telescopes and dedicated huge apertures for space telescopes.

The Optimal Optical Coronagraph (OOC) Workshop held at the Lorentz Center in September 2017 in Leiden, the Netherlands, gathered a diverse group of 25 researchers working on exoplanet instrumentation to stimulate the emergence and sharing of new ideas. In this second installment of a series of three papers summarizing the outcomes of the OOC workshop (see also~\citenum{ruane2018,snik2018}), we present an overview of common path wavefront sensing/control and Coherent Differential Imaging techniques, highlight the latest results, and expose their relative strengths and weaknesses. We layout critical milestones for the field with the aim of enhancing future ground/space based high contrast imaging platforms. Techniques like these will help to bridge the daunting contrast gap required to image a terrestrial planet in the zone where it can retain liquid water, in reflected light around a G type star from space., Comment: 18 pages, 9 figures

High-resolution spectroscopy is a key element for present and future astronomical instrumentation. In particular, coupled to high contrast imagers and coronagraphs, high spectral resolution enables higher contrast and has been identified as a very powerful combination to characterise exoplanets, starting from giant planets now, up to Earth-like planet eventually for the future instruments. In this context, we propose the implementation of an innovative echelle spectrometer based on the use of VIPA (Virtually Imaged Phased Array, Shirasaki 1996). The VIPA itself is a particular kind of Fabry-Perot interferometer, used as an angular disperser with much greater dispersive power than common diffraction grating. The VIPA is an efficient, small component (3 cm x 2.4 cm), that takes the very advantage of single mode injection in a versatile design. The overall instrument presented here is a proof-of-concept of a compact, high-resolution (R > 80 000) spectrometer, dedicated to the H and K bands, in the context of the project High-Dispersion Coronagrahy developed at IPAG. The optical bench has a foot-print of 40 cm x 26 cm ; it is fed by two Single-Mode Fibers (SMF), one dedicated to the companion, and one to the star and/or to a calibration channel, and is cooled down to 80 K. This communication first presents the scientific and instrumental context of the project, and the principal merit of single-mode operations in high-resolution spectrometry. After recalling the physical structure of the VIPA and its implementation in an echelle-spectrometer design, it then details the optical design of the spectrometer. In conclusion, further steps (integration, calibration, coupling with adaptive optics) and possible optimization are briefly presented. Keywords: Echelle Spectrometer, High Spectral Resolution, Exoplanets, High-Dispersion Coronography, Infrared, Adaptive Optics, SPHERE

SHARK-NIR is one of the two coronagraphic instruments proposed for the Large Binocular Telescope. Together with SHARK-VIS (performing coronagraphic imaging in the visible domain), it will offer the possibility to do binocular observations combining direct imaging, coronagraphic imaging and coronagraphic low resolution spectroscopy in a wide wavelength domain, going from 0.5{\mu}m to 1.7{\mu}m. Additionally, the contemporary usage of LMIRCam, the coronagraphic LBTI NIR camera, working from K to L band, will extend even more the covered wavelength range. In January 2017 SHARK-NIR underwent a successful final design review, which endorsed the instrument for construction and future implementation at LBT. We report here the final design of the instrument, which foresees two intermediate pupil planes and three focal planes to accomodate a certain number of coronagraphic techniques, selected to maximize the instrument contrast at various distances from the star. Exo-Planets search and characterization has been the science case driving the instrument design, but the SOUL upgrade of the LBT AO will increase the instrument performance in the faint end regime, allowing to do galactic (jets and disks) and extra-galactic (AGN and QSO) science on a relatively wide sample of targets, normally not reachable in other similar facilities., Comment: 8 pages, 6 figures, AO4ELT5 conference proceedings

The Optimal Optical CoronagraphWorkshop at the Lorentz Center in September 2017 in Leiden, the Netherlands gathered a diverse group of 25 researchers working on exoplanet instrumentation to stimulate the emergence and sharing of new ideas. This contribution is the final part of a series of three papers summarizing the outcomes of the workshop, and presents an overview of novel optical technologies and systems that are implemented or considered for high-contrast imaging instruments on both ground-based and space telescopes. The overall objective of high contrast instruments is to provide direct observations and characterizations of exoplanets at contrast levels as extreme as 10^-10. We list shortcomings of current technologies, and identify opportunities and development paths for new technologies that enable quantum leaps in performance. Specifically, we discuss the design and manufacturing of key components like advanced deformable mirrors and coronagraphic optics, and their amalgamation in "adaptive coronagraph" systems. Moreover, we discuss highly integrated system designs that combine contrast-enhancing techniques and characterization techniques (like high-resolution spectroscopy) while minimizing the overall complexity. Finally, we explore extreme implementations using all-photonics solutions for ground-based telescopes and dedicated huge apertures for space telescopes.

The Optimal Optical Coronagraph (OOC) Workshop held at the Lorentz Center in September 2017 in Leiden, the Netherlands, gathered a diverse group of 25 researchers working on exoplanet instrumentation to stimulate the emergence and sharing of new ideas. In this second installment of a series of three papers summarizing the outcomes of the OOC workshop (see also~\citenum{ruane2018,snik2018}), we present an overview of common path wavefront sensing/control and Coherent Differential Imaging techniques, highlight the latest results, and expose their relative strengths and weaknesses. We layout critical milestones for the field with the aim of enhancing future ground/space based high contrast imaging platforms. Techniques like these will help to bridge the daunting contrast gap required to image a terrestrial planet in the zone where it can retain liquid water, in reflected light around a G type star from space., Comment: 18 pages, 9 figures

As the performance of coronagraphs improves, the achievable contrast is more and more dependent of the shape of the pupil. The future generation of space and ground based coronagraphic instruments will have to achieve high contrast levels on on-axis and/or segmented telescopes. To correct for the high amplitude aberrations introduced by secondary mirror structures and segmentation of the primary mirror, we explore a two deformable mirror (DM) method. The major difficulty of several DM methods is the non-linear relation linking actuator strokes to the point spread function in the coronagraph focal plane. The Active Compensation of Aperture Discontinuities (ACAD) method is achieving this minimization by solving a non linear differential Monge Ampere equation. Once this open loop method have reached the minimum, a close-loop stroke minimization method can be applied to correct for phase and amplitude aberrations to achieve the ultimate contrast. In this paper, I describe the results of the parametric analysis that that I have undertaken on this method. After recalling the principle of the method, I will described the explored parameter space (deformable mirror set-up, shape of the pupil, bandwidth, coronagraph designs). I will precisely described the way I simulated the Vortex coronagraph for this numerical simulation. Finally I will present the preliminary results of this parametric analysis for space telescope pupils only., Comment: Proceedings of the SPIE, Volume 9605, id. 96050M 13 pp. (2015)

With the recent commissioning of ground instruments such as SPHERE or GPI and future space observatories like WFIRST-AFTA, coronagraphy should probably become the most efficient tool for identifying and characterizing extra-solar planets in the forthcoming years. Coronagraphic instruments such as Phase mask coronagraphs (PMC) are usually based on a phase mask or plate located at the telescope focal plane, spreading the starlight outside the diameter of a Lyot stop that blocks it. In this communication is investigated the capability of a PMC to act as a phase-shifting wavefront sensor for better control of the achieved star extinction ratio in presence of the coronagraphic mask. We discuss the two main implementations of the phase-shifting process, either introducing phase-shifts in a pupil plane and sensing intensity variations in an image plane, or reciprocally. Conceptual optical designs are described in both cases. Numerical simulations allow for better understanding of the performance and limitations of both options, and optimizing their fundamental parameters. In particular, they demonstrate that the phase-shifting process is a bit more efficient when implemented into an image plane, and is compatible with the most popular phase masks currently employed, i.e. four-quadrants and vortex phase masks., Comment: 22 pages, 9 figures, 3 tables

As the performance of coronagraphs improves, the achievable contrast is more and more dependent of the shape of the pupil. The future generation of space and ground based coronagraphic instruments will have to achieve high contrast levels on on-axis and/or segmented telescopes. To correct for the high amplitude aberrations introduced by secondary mirror structures and segmentation of the primary mirror, we explore a two deformable mirror (DM) method. The major difficulty of several DM methods is the non-linear relation linking actuator strokes to the point spread function in the coronagraph focal plane. The Active Compensation of Aperture Discontinuities (ACAD) method is achieving this minimization by solving a non linear differential Monge Ampere equation. Once this open loop method have reached the minimum, a close-loop stroke minimization method can be applied to correct for phase and amplitude aberrations to achieve the ultimate contrast. In this paper, I describe the results of the parametric analysis that that I have undertaken on this method. After recalling the principle of the method, I will described the explored parameter space (deformable mirror set-up, shape of the pupil, bandwidth, coronagraph designs). I will precisely described the way I simulated the Vortex coronagraph for this numerical simulation. Finally I will present the preliminary results of this parametric analysis for space telescope pupils only., Comment: Proceedings of the SPIE, Volume 9605, id. 96050M 13 pp. (2015)

With the recent commissioning of ground instruments such as SPHERE or GPI and future space observatories like WFIRST-AFTA, coronagraphy should probably become the most efficient tool for identifying and characterizing extra-solar planets in the forthcoming years. Coronagraphic instruments such as Phase mask coronagraphs (PMC) are usually based on a phase mask or plate located at the telescope focal plane, spreading the starlight outside the diameter of a Lyot stop that blocks it. In this communication is investigated the capability of a PMC to act as a phase-shifting wavefront sensor for better control of the achieved star extinction ratio in presence of the coronagraphic mask. We discuss the two main implementations of the phase-shifting process, either introducing phase-shifts in a pupil plane and sensing intensity variations in an image plane, or reciprocally. Conceptual optical designs are described in both cases. Numerical simulations allow for better understanding of the performance and limitations of both options, and optimizing their fundamental parameters. In particular, they demonstrate that the phase-shifting process is a bit more efficient when implemented into an image plane, and is compatible with the most popular phase masks currently employed, i.e. four-quadrants and vortex phase masks., Comment: 22 pages, 9 figures, 3 tables

Coronagraphy is a very efficient technique for identifying and characterizing extra-solar planets orbiting in the habitable zone of their parent star, especially when used in a space environment. An important family of coronagraphs is based on phase plates located at an intermediate image plane of the optical system, that spread the starlight outside the "Lyot" exit pupil plane of the instrument. In this communication we present a set of candidate phase functions generating a central null at the Lyot plane, and study how it propagates to the image plane of the coronagraph. These functions include linear azimuthal phase ramps (the well-known optical vortex), azimuthally cosine-modulated phase profiles, and circular phase gratings. Numerical simulations of the expected null depth, inner working angle, sensitivity to pointing errors, effect of central obscuration located at the pupil or image planes, and effective throughput including image mask and Lyot stop transmissions are presented and discussed. The preliminary conclusion is that azimuthal cosine functions appear as an interesting alternative to the classical optical vortex of integer topological charge., Comment: 12 pages

Coronagraphs of the apodized pupil and shaped pupil varieties use the Fraunhofer diffraction properties of amplitude masks to create regions of high contrast in the vicinity of a target star. Here we present a hybrid coronagraph architecture in which a binary, hard-edged shaped pupil mask replaces the gray, smooth apodizer of the apodized pupil Lyot coronagraph (APLC). For any contrast and bandwidth goal in this configuration, as long as the prescribed region of contrast is restricted to a finite area in the image, a shaped pupil is the apodizer with the highest transmission. We relate the starlight cancellation mechanism to that of the conventional APLC. We introduce a new class of solutions in which the amplitude profile of the Lyot stop, instead of being fixed as a padded replica of the telescope aperture, is jointly optimized with the apodizer. Finally, we describe shaped pupil Lyot coronagraph (SPLC) designs for the baseline architecture of the Wide-Field Infrared Survey Telescope-Astrophysics Focused Telescope Assets (WFIRST-AFTA) coronagraph. These SPLCs help to enable two scientific objectives of the WFIRST-AFTA mission: (1) broadband spectroscopy to characterize exoplanet atmospheres in reflected starlight and (2) debris disk imaging., Comment: 41 pages, 15 figures; published in the JATIS special section on WFIRST-AFTA coronagraphs

We introduce a new class of solutions for Apodized Pupil Lyot Coronagraphs (APLC) with segmented aperture telescopes to remove broadband diffracted light from a star with a contrast level of $10^{10}$. These new coronagraphs provide a key advance to enabling direct imaging and spectroscopy of Earth twins with future large space missions. Building on shaped pupil (SP) apodization optimizations, our approach enables two-dimensional optimizations of the system to address any aperture features such as central obstruction, support structures or segment gaps. We illustrate the technique with a design that could reach $10^{10}$ contrast level at 34\,mas for a 12\,m segmented telescope over a 10\% bandpass centered at a wavelength $\lambda_0=$500\,nm. These designs can be optimized specifically for the presence of a resolved star, and in our example, for stellar angular size up to 1.1\,mas. This would allow probing the vicinity of Sun-like stars located beyond 4.4\,pc, therefore fully retiring this concern. If the fraction of stars with Earth-like planets is $\eta_{\Earth}=0.1$, with 18\% throughput, assuming a perfect, stable wavefront and considering photon noise only, 12.5 exo-Earth candidates could be detected around nearby stars with this design and a 12\,m space telescope during a five-year mission with two years dedicated to exo-Earth detection (one total year of exposure time and another year of overheads). Our new hybrid APLC/SP solutions represent the first numerical solution of a coronagraph based on existing mask technologies and compatible with segmented apertures, and that can provide contrast compatible with detecting and studying Earth-like planets around nearby stars. They represent an important step forward towards enabling these science goals with future large space missions., Comment: 9 pages, 6 figures, ApJ accepted on 01/04/2016

Coronagraphy is a very efficient technique for identifying and characterizing extra-solar planets orbiting in the habitable zone of their parent star, especially when used in a space environment. An important family of coronagraphs is based on phase plates located at an intermediate image plane of the optical system, that spread the starlight outside the "Lyot" exit pupil plane of the instrument. In this communication we present a set of candidate phase functions generating a central null at the Lyot plane, and study how it propagates to the image plane of the coronagraph. These functions include linear azimuthal phase ramps (the well-known optical vortex), azimuthally cosine-modulated phase profiles, and circular phase gratings. Numerical simulations of the expected null depth, inner working angle, sensitivity to pointing errors, effect of central obscuration located at the pupil or image planes, and effective throughput including image mask and Lyot stop transmissions are presented and discussed. The preliminary conclusion is that azimuthal cosine functions appear as an interesting alternative to the classical optical vortex of integer topological charge., Comment: 12 pages

Coronagraphs of the apodized pupil and shaped pupil varieties use the Fraunhofer diffraction properties of amplitude masks to create regions of high contrast in the vicinity of a target star. Here we present a hybrid coronagraph architecture in which a binary, hard-edged shaped pupil mask replaces the gray, smooth apodizer of the apodized pupil Lyot coronagraph (APLC). For any contrast and bandwidth goal in this configuration, as long as the prescribed region of contrast is restricted to a finite area in the image, a shaped pupil is the apodizer with the highest transmission. We relate the starlight cancellation mechanism to that of the conventional APLC. We introduce a new class of solutions in which the amplitude profile of the Lyot stop, instead of being fixed as a padded replica of the telescope aperture, is jointly optimized with the apodizer. Finally, we describe shaped pupil Lyot coronagraph (SPLC) designs for the baseline architecture of the Wide-Field Infrared Survey Telescope-Astrophysics Focused Telescope Assets (WFIRST-AFTA) coronagraph. These SPLCs help to enable two scientific objectives of the WFIRST-AFTA mission: (1) broadband spectroscopy to characterize exoplanet atmospheres in reflected starlight and (2) debris disk imaging., Comment: 41 pages, 15 figures; published in the JATIS special section on WFIRST-AFTA coronagraphs

We introduce a new class of solutions for Apodized Pupil Lyot Coronagraphs (APLC) with segmented aperture telescopes to remove broadband diffracted light from a star with a contrast level of $10^{10}$. These new coronagraphs provide a key advance to enabling direct imaging and spectroscopy of Earth twins with future large space missions. Building on shaped pupil (SP) apodization optimizations, our approach enables two-dimensional optimizations of the system to address any aperture features such as central obstruction, support structures or segment gaps. We illustrate the technique with a design that could reach $10^{10}$ contrast level at 34\,mas for a 12\,m segmented telescope over a 10\% bandpass centered at a wavelength $\lambda_0=$500\,nm. These designs can be optimized specifically for the presence of a resolved star, and in our example, for stellar angular size up to 1.1\,mas. This would allow probing the vicinity of Sun-like stars located beyond 4.4\,pc, therefore fully retiring this concern. If the fraction of stars with Earth-like planets is $\eta_{\Earth}=0.1$, with 18\% throughput, assuming a perfect, stable wavefront and considering photon noise only, 12.5 exo-Earth candidates could be detected around nearby stars with this design and a 12\,m space telescope during a five-year mission with two years dedicated to exo-Earth detection (one total year of exposure time and another year of overheads). Our new hybrid APLC/SP solutions represent the first numerical solution of a coronagraph based on existing mask technologies and compatible with segmented apertures, and that can provide contrast compatible with detecting and studying Earth-like planets around nearby stars. They represent an important step forward towards enabling these science goals with future large space missions., Comment: 9 pages, 6 figures, ApJ accepted on 01/04/2016

HARMONI is the E-ELT's first light visible and near-infrared integral field spectrograph. It will provide four different spatial scales, ranging from coarse spaxels of 60 × 30 mas best suited for seeing limited observations, to 4 mas spaxels that Nyquist sample the diffraction limited point spread function of the E-ELT at near-infrared wavelengths. Each spaxel scale may be combined with eleven spectral settings, that provide a range of spectral resolving powers (R 3500, 7500 and 20000) and instantaneous wavelength coverage spanning the 0.5 - 2.4 ¿m wavelength range of the instrument. In autumn 2015, the HARMONI project started the Preliminary Design Phase, following signature of the contract to design, build, test and commission the instrument, signed between the European Southern Observatory and the UK Science and Technology Facilities Council. Crucially, the contract also includes the preliminary design of the HARMONI Laser Tomographic Adaptive Optics system. The instrument's technical specifications were finalized in the period leading up to contract signature. In this paper, we report on the first activity carried out during preliminary design, defining the baseline architecture for the system, and the trade-off studies leading up to the choice of baseline.

A new coronagraphic instrument for the Large Binocular Telescope (LBT) has successfully passed the conceptual design phase. SHARK-NIR channel will be installed in one arm of the Large Binocular Telescope and it is designed to use different coronagraphic techniques, both to match as much as possible the different requirements of the different science cases and to explore the capabilities of such techniques for the next-generation of ELTs. By exploiting the combination with SHARK-VIS channel mounted at the other LBT arm, the instrument will offer simultaneous coronagraphic observations at different wavelengths, characterized by high contrast, even for relatively faint targets. This will be achievable thanks to the very efficient Adaptive Optics (AO) systems already operating at LBT (First Light AO, FLAO). Furthermore, the latter will be soon upgraded with new detectors, promising even better performance in terms of limiting magnitude. In this paper we present the status of the SHARK-NIR channel design.

A new coronagraphic instrument for the Large Binocular Telescope (LBT) has successfully passed the conceptual design phase. SHARK-NIR channel will be installed in one arm of the Large Binocular Telescope and it is designed to use different coronagraphic techniques, both to match as much as possible the different requirements of the different science cases and to explore the capabilities of such techniques for the next-generation of ELTs. By exploiting the combination with SHARK-VIS channel mounted at the other LBT arm, the instrument will offer simultaneous coronagraphic observations at different wavelengths, characterized by high contrast, even for relatively faint targets. This will be achievable thanks to the very efficient Adaptive Optics (AO) systems already operating at LBT (First Light AO, FLAO). Furthermore, the latter will be soon upgraded with new detectors, promising even better performance in terms of limiting magnitude. In this paper we present the status of the SHARK-NIR channel design.

As the performance of coronagraphs improves, the achievable contrast is more and more dependent of the shape of the pupil. The future generation of space and ground based coronagraphic instruments will have to achieve high contrast levels on on-axis and/or segmented telescopes. To correct for the high amplitude aberrations introduced by secondary mirror structures and segmentation of the primary mirror, we explore a two deformable mirror (DM) method. The major difficulty of several DM methods is the non-linear relation linking actuator strokes to the point spread function in the coronagraph focal plane. The Active Compensation of Aperture Discontinuities (ACAD) method is achieving this minimization by solving a non linear differential Monge Ampere equation. Once this open loop method have reached the minimum, a close-loop stroke minimization method can be applied to correct for phase and amplitude aberrations to achieve the ultimate contrast. In this paper, I describe the results of the parametric analysis that that I have undertaken on this method. After recalling the principle of the method, I will described the explored parameter space (deformable mirror set-up, shape of the pupil, bandwidth, coronagraph designs). I will precisely described the way I simulated the Vortex coronagraph for this numerical simulation. Finally I will present the preliminary results of this parametric analysis for space telescope pupils only.