Search

High energy density physics is the field of physics dedicated to the study of matter and plasmas in extreme conditions of temperature, densities and pressures. It encompasses multiple disciplines such as material science, planetary science, laboratory and astrophysical plasma science. For the latter, high energy density states can be accompanied by extreme radiation environments and super-strong magnetic fields. The creation of high energy density states in the laboratory consists in concentrating/depositing large amounts of energy in a reduced mass, typically solid material sample or dense plasma, over a time shorter than the typical timescales of heat conduction and hydrodynamic expansion. Laser-generated, high current–density ion beams constitute an important tool for the creation of high energy density states in the laboratory. Focusing plasma devices, such as cone-targets are necessary in order to focus and direct these intense beams towards the heating sample or dense plasma, while protecting the proton generation foil from the harsh environments typical of an integrated high-power laser experiment. A full understanding of the ion beam dynamics in focusing devices is therefore necessary in order to properly design and interpret the numerous experiments in the field. In this work, we report a detailed investigation of large-scale, kilojoule-class laser-generated ion beam dynamics in focusing devices and we demonstrate that high-brilliance ion beams compress magnetic fields to amplitudes exceeding tens of kilo-Tesla, which in turn play a dominant role in the focusing process, resulting either in a worsening or enhancement of focusing capabilities depending on the target geometry., source:Morace, A., Abe, Y., Honrubia, J.J. et al. Super-strong magnetic field-dominated ion beam dynamics in focusing plasma devices. Sci Rep 12, 6876 (2022). https://doi.org/10.1038/s41598-022-10829-1, source:https://doi.org/10.1038/s41598-022-10829-1

Iwano K., Yamanoi K., Iwasa Y., et al. Optical transmittance investigation of 1-keV ion-irradiated sapphire crystals as potential VUV to NIR window materials of fusion reactors. AIP Advances 6, 105108 (2016); https://doi.org/10.1063/1.4965927., We investigate the optical transmittances of ion-irradiated sapphire crystals as potential vacuum ultraviolet (VUV) to near-infrared (NIR) window materials of fusion reactors. Under potential conditions in fusion reactors, sapphire crystals are irradiated with hydrogen (H), deuterium (D), and helium (He) ions with 1-keV energy and ∼ 1020-m-2 s-1 flux. Ion irradiation decreases the transmittances from 140 to 260 nm but hardly affects the transmittances from 300 to 1500 nm. H-ion and D-ion irradiation causes optical absorptions near 210 and 260 nm associated with an F-center and an F+-center, respectively. These F-type centers are classified as Schottky defects that can be removed through annealing above 1000 K. In contrast, He-ion irradiation does not cause optical absorptions above 200 nm because He-ions cannot be incorporated in the crystal lattice due to the large ionic radius of He-ions. Moreover, the significant decrease in transmittance of the ion-irradiated sapphire crystals from 140 to 180 nm is related to the light scattering on the crystal surface. Similar to diamond polishing, ion irradiation modifies the crystal surface thereby affecting the optical properties especially at shorter wavelengths. Although the transmittances in the VUV wavelengths decrease after ion irradiation, the transmittances can be improved through annealing above 1000 K. With an optical transmittance in the VUV region that can recover through simple annealing and with a high transparency from the ultraviolet (UV) to the NIR region, sapphire crystals can therefore be used as good optical windows inside modern fusion power reactors in terms of light particle loadings of hydrogen isotopes and helium.

Takizawa R., Sakagami H., Nagatomo H., et al. Effect of irradiation uniformity on quasi-isentropic shock compression of solid spheres. High Energy Density Physics 52, 101124 (2024); https://doi.org/10.1016/j.hedp.2024.101124., In inertial confinement fusion using central ignition, the ignition hot spot is generated through self-heating during fuel compression. In contrast, fast ignition creates the hot spot through external heating. This difference allows the fast ignition approach to use a solid sphere as the fusion fuel shape. The implosion of a solid sphere is one form of laser-direct-drive slow implosion. Solid sphere fuel exhibits tolerance to hydrodynamic instability and can be mass-produced relatively easily, offering significant advantages for developing inertial fusion energy. Achieving high fuel peak and areal densities of with a solid sphere requires quasi-isentropic compression, which involves multiple shock waves. Our results show the critical role of uniform laser irradiation in initiating weak shock waves in the early phase, which is essential for forming a uniform and dense fuel core with solid spheres. Furthermore, dynamically adjusting the laser spot diameter could be crucial in optimizing the effectiveness of laser-direct-drive and fast ignition techniques when using solid sphere fuel.

Takizawa R., Sakagami H., Nagatomo H., et al. Effect of irradiation uniformity on quasi-isentropic shock compression of solid spheres. High Energy Density Physics 52, 101124 (2024); https://doi.org/10.1016/j.hedp.2024.101124., In inertial confinement fusion using central ignition, the ignition hot spot is generated through self-heating during fuel compression. In contrast, fast ignition creates the hot spot through external heating. This difference allows the fast ignition approach to use a solid sphere as the fusion fuel shape. The implosion of a solid sphere is one form of laser-direct-drive slow implosion. Solid sphere fuel exhibits tolerance to hydrodynamic instability and can be mass-produced relatively easily, offering significant advantages for developing inertial fusion energy. Achieving high fuel peak and areal densities of with a solid sphere requires quasi-isentropic compression, which involves multiple shock waves. Our results show the critical role of uniform laser irradiation in initiating weak shock waves in the early phase, which is essential for forming a uniform and dense fuel core with solid spheres. Furthermore, dynamically adjusting the laser spot diameter could be crucial in optimizing the effectiveness of laser-direct-drive and fast ignition techniques when using solid sphere fuel.

Iwano K., Yamanoi K., Iwasa Y., et al. Optical transmittance investigation of 1-keV ion-irradiated sapphire crystals as potential VUV to NIR window materials of fusion reactors. AIP Advances 6, 105108 (2016); https://doi.org/10.1063/1.4965927., We investigate the optical transmittances of ion-irradiated sapphire crystals as potential vacuum ultraviolet (VUV) to near-infrared (NIR) window materials of fusion reactors. Under potential conditions in fusion reactors, sapphire crystals are irradiated with hydrogen (H), deuterium (D), and helium (He) ions with 1-keV energy and ∼ 1020-m-2 s-1 flux. Ion irradiation decreases the transmittances from 140 to 260 nm but hardly affects the transmittances from 300 to 1500 nm. H-ion and D-ion irradiation causes optical absorptions near 210 and 260 nm associated with an F-center and an F+-center, respectively. These F-type centers are classified as Schottky defects that can be removed through annealing above 1000 K. In contrast, He-ion irradiation does not cause optical absorptions above 200 nm because He-ions cannot be incorporated in the crystal lattice due to the large ionic radius of He-ions. Moreover, the significant decrease in transmittance of the ion-irradiated sapphire crystals from 140 to 180 nm is related to the light scattering on the crystal surface. Similar to diamond polishing, ion irradiation modifies the crystal surface thereby affecting the optical properties especially at shorter wavelengths. Although the transmittances in the VUV wavelengths decrease after ion irradiation, the transmittances can be improved through annealing above 1000 K. With an optical transmittance in the VUV region that can recover through simple annealing and with a high transparency from the ultraviolet (UV) to the NIR region, sapphire crystals can therefore be used as good optical windows inside modern fusion power reactors in terms of light particle loadings of hydrogen isotopes and helium.

Iwano K., Yamanoi K., Iwasa Y., et al. Optical transmittance investigation of 1-keV ion-irradiated sapphire crystals as potential VUV to NIR window materials of fusion reactors. AIP Advances 6, 105108 (2016); https://doi.org/10.1063/1.4965927., We investigate the optical transmittances of ion-irradiated sapphire crystals as potential vacuum ultraviolet (VUV) to near-infrared (NIR) window materials of fusion reactors. Under potential conditions in fusion reactors, sapphire crystals are irradiated with hydrogen (H), deuterium (D), and helium (He) ions with 1-keV energy and ∼ 1020-m-2 s-1 flux. Ion irradiation decreases the transmittances from 140 to 260 nm but hardly affects the transmittances from 300 to 1500 nm. H-ion and D-ion irradiation causes optical absorptions near 210 and 260 nm associated with an F-center and an F+-center, respectively. These F-type centers are classified as Schottky defects that can be removed through annealing above 1000 K. In contrast, He-ion irradiation does not cause optical absorptions above 200 nm because He-ions cannot be incorporated in the crystal lattice due to the large ionic radius of He-ions. Moreover, the significant decrease in transmittance of the ion-irradiated sapphire crystals from 140 to 180 nm is related to the light scattering on the crystal surface. Similar to diamond polishing, ion irradiation modifies the crystal surface thereby affecting the optical properties especially at shorter wavelengths. Although the transmittances in the VUV wavelengths decrease after ion irradiation, the transmittances can be improved through annealing above 1000 K. With an optical transmittance in the VUV region that can recover through simple annealing and with a high transparency from the ultraviolet (UV) to the NIR region, sapphire crystals can therefore be used as good optical windows inside modern fusion power reactors in terms of light particle loadings of hydrogen isotopes and helium.

Copyright 1995 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in Physics of Plasmas, 2(6), 2495-2503, 1995 and may be found at http://dx.doi.org/10.1063/1.871211

Copyright 2003 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in Review of Scientific Instruments, 74(3), 2198-2201, 2003 and may be found at http://dx.doi.org/10.1063/1.1537852

Copyright 1995 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in Physics of Plasmas, 2(6), 2495-2503, 1995 and may be found at http://dx.doi.org/10.1063/1.871211

Copyright 2003 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in Review of Scientific Instruments, 74(3), 2198-2201, 2003 and may be found at http://dx.doi.org/10.1063/1.1537852