Search

Heat loss through the building envelope comprises air leaks through the cracks and largely through the windows, which is the weakest link of the thermal envelope. Therefore, it is necessary to devise a systematic approach to analyze the rightful selection of glass for buildings. The investigation is to analyze the energy-saving potential of different glasses and their comparisons to the initial capital cost to find the payback time in terms of energy saving by using two different types of equipment. The quantitative simulation study was completed on the Hourly Analysis Program (HAP) to analyze the annual energy consumption of the HVAC system for seven glasses and two types of chilled water equipment. The results show that the performance glasses with a tint had better efficiency in terms of energy saving, with a payback time of 3–7 months. A comparison of all glasses illustrated that float glass contributes the most to the total cooling load among all glasses, which were 5.04%, 5.7%, 7.6%, and 8.9% for the N, S, E, and W orientations, respectively. Moreover, the lowest contribution of glass to the total cooling load was given by tinted double-glazed glass, which was 2%, 2.3%, 3.0%, and 3.01% for N, S, E, and W orientations, respectively.

Dynamics in rainfall patterns due to climate change are posing a threat to crop production globally. The core issue of food security is expected to intensify, and improving crop yield using motorized power irrigation mechanisms can help in curtailing the impact of drought and changing weather patterns to meet the crop water requirement. To meet the energy demand of irrigation systems, this paper explores the use of hybrid energy sources, i.e., wind and solar energy, taking Shaqra Saudi Arabia as case study. This paper presents a systematic case study that evaluates crop water requirements for 3 different crops using the United Nations Food and Agriculture Organization’s software CROPWAT 8.0 and converts the water requirement into energy demand to design the water pumping system. The energy requirement water pumping system is used to design a hybrid energy system using HOMER PRO 3.14.4 that can reliably meet the energy demand. The results suggests that, contrary to the common consideration in Saudi Arabia, a hybrid of wind and solar energy proves to be more cost effective and yields a higher amount of energy. The results suggest that a significant reduction in cost can be achieved with a hybrid energy system as compared to a solar PV system only.

Repowering a wind farm enhances its ability to generate electricity, allowing it to better utilize areas with high mean wind speeds. Pakistan’s present energy dilemma is a serious impediment to its economic development. The usage of a diesel generator as a dependable backup power source raises the cost of energy per kWh and increases environmental emissions. To minimize environmental emissions, grid-connected wind farms enhance the percentage of wind energy in the electricity system. These wind generators’ effects, on the other hand, are augmented by the absorption of greater quantities of reactive electricity from the grid. According to respective grid codes, integration of commercial onshore Large-Scale Wind Farms (LSWF) into a national grid is fraught with technical problems and inter-farm wake effects, which primarily ensure power quality while degrading overall system operation and limiting the optimal use of attainable wind resources. The goal of this study is to examine and estimate the techno-economic influence of large-scale wind farms linked to poor transmission systems in Pakistan, contemplating the inter-farm wake effect and reactive power diminution and compensating using a range of voltage-ampere reactive (VAR) devices. This study presents a partial repowering technique to address active power deficits produced by the wake effect by raising hub height by 20 m, which contributed to recovering the active power deficit to 48% and so reduced the effects of upstream wind farms. Simulations were conducted for several scenarios on an actual test system modeled in MATLAB for comparative study using capacitor banks and different flexible alternating current transmission system (FACTS) devices. Using the SAM (System Advisor Model) and RETscreen, a complete technical, economic, and environmental study was done based on energy fed into the grid, payback time, net present value (NPV), and greenhouse gases (GHG) emission reduction. The studies suggest that the unifi

In addition to zero-carbon generation, the plummeting cost of renewable energy sources (RES) is enabling the increased use of distributed-generation sources. Although the RES appear to be a cheaper source of energy, without the appropriate design of the RES with a true understanding of the nature of the load, they can be an unreliable and expensive source of energy. Limited research has been aimed at designing small-scale hybrid energy systems for irrigation pumping systems, and these studies did not quantify the water requirement, or in turn the energy required to supply the irrigation water. This paper provides a comprehensive feasibility analysis of an off-grid hybrid renewable energy system for the design of a water-pumping system for irrigation applications in Sudan. A systematic and holistic framework combined with a techno-economic optimization analysis for the planning and design of hybrid renewable energy systems for small-scale irrigation water-pumping systems is presented. Different hybridization cases of solar photovoltaic, wind turbine and battery storage at 12 different sites in Sudan are simulated, evaluated, and compared, considering the crop water requirement for different crops, the borehole depth, and the stochasticity of renewable energy resources. Soil, weather, and climatic data from 12 different sites in Sudan were used for the case studies, with the key aim to find the most robust and reliable solution with the lowest system cost. The results of the case studies suggest that the selection of the system is highly dependent on the cost, the volatility of the wind speed, solar radiation, and the size of the system; at present, hybridization is not the primary option at most of sites, with the exception of two. However, with the reduction in price of wind technology, the possibility of hybrid generation will rise.