Search

This study investigated the performance of recycled polypropylene (RPP)/peanut shell powder (PSP) composites with untreated PSP and treated PSP with alkaline peroxide. The RPP/PSP and RPP/PSPH2O2 composites were prepared by melt mixing and compression molding at different PSP loadings (10 wt.% to 40 wt.%). The samples were characterized by processing properties, tensile properties, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and water absorption behavior. The treated PSP enhanced the stabilization torque, tensile strength, elongation at break, tensile modulus, and water absorption of RPP/PSP-H2O2 composites. FTIR spectra and SEM showed that the elimination of lignin content strongly influenced the fractured surface and chemical characteristics of the RPP/PSP-H2O2 composites. [ABSTRACT FROM AUTHOR]

Low-pressure steam explosion (LPSE) combined with alkaline peroxide (AP) pretreatment was first employed to separate hemicellulose from Lespedeza stalks. The monosaccharide composition and molecular weight distribution of the obtained hemicellulose fractions were characterized in this study. The results show that the hemicellulose extracted from Lespedeza stalks consisted of xylose, glucose, galactose, and mannose, which was a mixture of arabinoxylans and xyloglucans or β-glucans. The yield of hemicellulose fractions after AP pretreatment ranged from 11.2% (2.5% hydrogen peroxide (H2O2), w/v for 12 h) to 12.2% (3.3% H2O2, w/v for 72 h). The molecular weight of hemicellulose decreased from 2,458 g/mol to 1,984 g/mol after AP pretreatment, indicating its degradation reaction. The structure of hemicellulose was analyzed by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance, and heteronuclear single quantum coherence. The AP pretreatment partially cleaved the backbone and the ether linkage between lignin and hemicelluloses. Also, branched-chain α-Darabinofuranosyl in which β-D-xylose substituted at the C-3 position (monosubstituted) was removed, illustrating a partial debranching reaction. Therefore, the combination of low-pressure steam explosion and alkaline peroxide pretreatment (LPSE-AP) is an effective pretreatment method to separate hemicellulose from Lespedeza stalk. [ABSTRACT FROM AUTHOR]

A combination of steam explosion (SE) and alkaline peroxide (AP) used to pretreat bamboo was investigated. Steam explosion at 224 °C for 4 min was applied to bamboo, and the pretreated bamboo was delignified by alkaline peroxide. Enzymatic hydrolysis was compared in the pretreated samples. Steam pretreatment led to remarkable hemicellulose solubilization (63.2%). Lignin solubilization (93.1%) was achieved by alkaline peroxide treatment of steam-pretreated bamboo at 80 °C for 1 h in 0.88% (v/v) H2O2, whereas only 33.4% of lignin was solubilized when using raw bamboo. Pretreatment methods resulted in a low degree of polymerization and increased hydrolysis of cellulose. A maximum glucose yield of 90.5% was achieved with a combined steam explosion and alkaline peroxide pretreatment. The surface structure of treated bamboo and the adsorption of enzyme on the substrate were characterized by X-ray photoelectron spectroscopy. Delignification decreased enzyme adsorption and increased enzymatic conversion. SEM analyses indicated that SE-AP pretreatment disrupted lignin networks and exposed crystalline cellulose in bamboo more effectively than SE or AP pretreatment alone. [ABSTRACT FROM AUTHOR]

As part of a program to reduce electrical energy consumption in the refining process, the effects of the ozone and alkaline peroxide treatments on fibre and handsheet properties, prior and subsequent to low consistency (LC) refining, were assessed and compared by applying different levels of ozone and a range of peroxide and alkali charges to a primary stage hemlock thermomechanical pulp (TMP). Both highly alkaline peroxide treatments and ozone treatments decreased the specific energy required for strong mechanical pulp. The improvement in pulp strength through alkaline peroxide treatment mainly resulted from pulp surface changes caused by generation of acid groups. The highly alkaline peroxide treatments significantly increased pulp brightness but did not promote the further fibrillation during the subsequent LC refining. On the other hand, ozone treatments provided tensile strength increases, along with small brightness enhancements for the dark hemlock TMP, and increased the tensile gains obtained through LC refining. The effects of ozone treatments on tensile strength before and after LC refining were the result of pulp surface modifications, fibre swelling, and loss of fibre wall integrity due to non-selective chemical attack. High levels of ozone treatment caused tear strength to decrease during subsequent LC refining. [ABSTRACT FROM AUTHOR]

Abstract: The enzymatic hydrolysis of sugarcane bagasse was investigated by treating a peroxide–alkaline bagasse with a pineapple stem juice, xylanase and cellulase. Pre-treatment procedures of sugarcane bagasse with alkaline hydrogen peroxide were evaluated and compared. Analyses were performed using 24 factorial designs, with pre-treatment time, temperature, magnesium sulfate and hydrogen peroxide concentration as factors. The responses evaluated were the yield of cellobiose and glucose released from pretreated bagasse after enzymatic hydrolysis. The results show that the highest enzymatic conversion was obtained for bagasse using 2% hydrogen peroxide at 60°C for 16h in the presence of 0.5% magnesium sulfate. Bagasse (5%) was treated with pineapple stem extract, which contains mixtures of protease and esterase, in combination with xylanase and cellulase. It was observed that the amount of glucose and cellobiose released from bagasse increased with the mixture of enzymes. It is believed that the enzymes present in pineapple extracts are capable of hydrolyze specific linkages that would facilitate the action of digesting plant cell walls enzymes. This increases the amount of glucose and other hexoses that are released during the enzymatic treatment and also reduces the amount of cellulase necessary in a typical hydrolysis. [ABSTRACT FROM AUTHOR]

In this paper, the seven acid-insoluble lignin preparations from barley straw were first extracted with alkaline hydrogen peroxide in order to study how the delignification and degradation of the lignin is influenced by aqueous 1.5% H2O2 extractant to straw ratios. The results showed that treatment of dewaxed barley straw with 1.5% H2O2 at 45 °C for 14 h (pH 12.0) under the extractant to straw ratios of 10:1, 13:1, 15:1, 18:1, 20:1, 25:1, and 30:1 resulted in dissolution of 65.8%, 68.4%, 68.4%, 69.0%, 69.7%, 71.6%, and 72.3% of the original lignin and 78.7%, 79.8%, 82.3%, 83.4%, 84.8%, 85.3%, and 85.3% of the original hemicelluloses, respectively. The degraded seven lignin samples were analyzed with respect to their chemical compositions, content of chemically linked polysaccharides, molecular weights and structural changes. It was found that the alkaline peroxide treatment under the conditions given led to a noticeable increase in a amount of carboxyl groups due to the oxidation. The results from 13C-NMR analyses showed that the treatment was extremely effective for isolation of highly pure lignins from the straw, and the treatment under the conditions used did not affect the overall structure of lignin. The β-O-4 ether bond and β–β carbon–carbon linkage were found to be the major linkages between lignin units. Hydroxycinnamic acids, such as p-coumaric and ferulic acids, appeared to be strongly linked to lignin molecules, in which p-coumaric acid was found to be bonded to lignin by ester linkage, while ferulic acid was linked by its phenolic group via ether bond to lignin and also principally linked by its carboxyl group via ester bond to lignin and/or hemicelluloses. [Copyright &y& Elsevier]