Search

Considering that a unit dual quaternion can describe elegantly the rigid transformation including rotation and translation, the point-wise weighted 3D coordinate transformation using a unit dual quaternion is formulated. The constructed transformation model by a unit dual quaternion does not need differential process to eliminate the three translation parameters, while traditional models do. Based on the Lagrangian extremum law, the analytical dual quaternion algorithm (ADQA) of the point-wise weighted 3D coordinate transformation is proved existed and derived in detail. Four numerical cases, including geodetic datum transformation, the registration of LIDAR point clouds, and two simulated cases, are studied. This study shows that ADQA is valid as well as the modified procrustes algorithm (MPA) and the orthonormal matrix algorithm (OMA). ADQA is suitable for the 3D coordinate transformation with point-wise weight and no matter rotation angles are small or big. In addition, the results also indicate that if the distribution of common points degrades from 3D or 2D space to 1D space, the solvable correct transformation parameters decrease. In other words, all common points should not be located on a line. From the perspective of improving the transformation accuracy, high accurate control points (with small errors in the coordinates) should be chosen, and it is preferred to decrease the rotation angles as much as possible. [ABSTRACT FROM AUTHOR]

Geometric error is a crucial factor influencing the spatial accuracy of CNC machine tools. A novel methodology for modeling, measuring, and identifying geometric errors in multi-axis machine tools is proposed in this paper. Firstly, a synthetic volumetric error model is established by utilizing dual quaternions for multi-axis CNC machine tools. To characterize the relative position relationship between the tool and the workpiece, the kinematics model automatically incorporates the complex coupling between position and orientation motion in an implicit way, enabling a concise and compact representation of the kinematics. Secondly, measure path planning includes candidate measurement positions which are screened to obtain the optimal position group by using observation indices and the modified Detmax method. Thirdly, a parametric modeling method based on exponential cosine fitting is proposed for representing both angular and linear errors, and an improved sparrow search algorithm and nested parameter uncertainty optimization are established to process curve fitting–based optimization of the geometric error term. The fitting of the exponential cosine model is quantified with model uncertainty, and the nested uncertainty optimization method is employed to improve geometric error terms with a poor fitting effect. Finally, the effectiveness is demonstrated through experimental comparisons. The geometric error of a single axis has an average decreased of 69.7%, and the compensation rate of roundness driven by two-axis synchronization is an average of 68.7%. This method offers the advantage of quantifying the minimum optimal number of measurements and positions, improving the efficiency of parametric modeling. [ABSTRACT FROM AUTHOR]

The rigid motion involving both rotation and translation in the 3D space can be simultaneously described by a unit dual quaternion. Considering this excellent property, the paper constructs the Helmert transformation (seven-parameter similarity transformation) model based on a unit dual quaternion and then presents a rigid iterative algorithm of Helmert transformation using a unit dual quaternion. Because of the singularity of the coefficient matrix of the normal equation, the nine parameter (including one scale factor and eight parameters of a dual quaternion) Helmert transformation model is reduced into five parameter (including one scale factor and four parameters of a unit quaternion which can represent the rotation matrix) Helmert transformation one. Besides, a good start estimate of parameter is required for the iterative algorithm, hence another algorithm employed to compute the initial value of parameter is put forward. The numerical experiments involving a case of small rotation angles i.e. geodetic coordinate transformation and a case of big rotation angles i.e. the registration of LIDAR points are studied. The results show the presented algorithms in this paper are correct and valid for the two cases, disregarding the rotation angles are big or small. And the accuracy of computed parameter is comparable to the classic Procrustes algorithm from Grafarend and Awange (J Geod 77:66-76, 2003), the orthonormal matrix algorithm from Zeng (Earth Planets Space 67:105, 2015), and the algorithm from Wang et al. (J Photogramm Remote Sens 94:63-69, 2014). [ABSTRACT FROM AUTHOR]

We prove that every bounded rational space curve of degree d and circularity c can be drawn by a linkage with 92d-6c+1 revolute joints. Our proof is based on two ingredients. The first one is the factorization theory of motion polynomials. The second one is the construction of a motion polynomial of minimum degree with given orbit. Our proof also gives the explicit construction of the linkage. [ABSTRACT FROM AUTHOR]

A six-axis vibration isolation system is essential to high-precision space systems for attenuating vibrations on precise instruments. The kinematic optimal design is researched for the space six-axis vibration isolator via Stewart mechanism. Jacobian matrix is the basis of the kinematic performance index. However, the conventional Jacobian matrix is not usually dimensionally homogeneous due to the inhomogeneous physical units, caused by the different mathematical representations of the rotation and translation. In this paper, we propose a dual quaternion approach to derive the dimensionally homogeneous Jacobian matrix of a general six-axis parallel mechanism. Two quaternions are used to parameterize the rotation and translation of the platform. The dimensionally scaling factor for the generalized Jacobian matrix is defined as the ratio of the norms of the two quaternions. The dimensionally homogenous Jacobian matrix is then obtained and applied to the optimal design of the six-axis vibration isolator. The performance index of isotropy is considered to make the isolator minimum kinematic coupling in its working configuration. [ABSTRACT FROM AUTHOR]

The authors consider current problems of the modern theory of dynamic systems on manifolds, which are actively developing. A brief review of such trends in the theory of dynamic systems is given. The results of the algebra of dual numbers, quaternionic algebras, biquaternions (dual quaternions), and their application to the analysis of infinitesimal neighborhoods and infinitesimal deformations of manifolds (schemes) are presented. The theory of differential-algebraic equations over the field of real numbers and their dynamics, as well as elements of trajectory optimization of respective dynamic systems, are outlined. On the basis of connection in bundles, the theory of differential-algebraic equations is extended to algebraic manifolds and schemes over arbitrary fields and schemes, respectively. [ABSTRACT FROM AUTHOR]

An equidistant double NURBS tool paths (EDNTP) fairing method satisfying the given fitting accuracy is proposed for the linear tool path in work coordinate system (WCS). By utilizing dual-quaternion to describe five-axis tool posture, the linear tool path in WCS is fitted with dual-quaternion B-spline vector function in order to obtain the equidistant double NURBS curves P and Q describing the coordinate points of tool tip and tool axis, respectively. Then, due to the different parameters of the two curves, a parameter synchronization interpolation model based on EDNTP is presented to realize synchronous motion of the two NURBS curve parameters during the interpolation process. The three-axis machining NURBS curve interpolation algorithm is utilized to interpolate the tool tip points NURBS curve of EDNTP for five-axis machining. In terms of parameter synchronization model, interpolation algorithm can be mapped to NURBS curve of tool axis points. Simulation and experimental results show that the proposed algorithm can generate G continuous EDNTP satisfying the given fitting accuracy and make the tool interpolate synchronously with the constant cutter length along the EDNTP during the interpolation process and achieve high machining precision which is mainly concentrated on the 10 mm series. [ABSTRACT FROM AUTHOR]

Rigid transformation including rotation and translation can be elegantly represented by a unit dual quaternion. Thus, a non-differential model of the Helmert transformation (3D seven-parameter similarity transformation) is established based on unit dual quaternion. This paper presents a rigid iterative algorithm of the Helmert transformation using dual quaternion. One small rotation angle Helmert transformation (actual case) and one big rotation angle Helmert transformation (simulative case) are studied. The investigation indicates the presented dual quaternion algorithm (QDA) has an excellent or fast convergence property. If an accurate initial value of scale is provided, e.g., by the solutions no. 2 and 3 of Závoti and Kalmár (Acta Geod Geophys 51:245–256, 2016) in the case that the weights are identical, QDA needs one iteration to obtain the correct result of transformation parameters; in other words, it can be regarded as an analytical algorithm. For other situations, QDA requires two iterations to recover the transformation parameters no matter how big the rotation angles are and how biased the initial value of scale is. Additionally, QDA is capable to deal with point-wise weight transformation which is more rational than those algorithms which simply take identical weights into account or do not consider the weight difference among control points. From the perspective of transformation accuracy, QDA is comparable to the classic Procrustes algorithm (Grafarend and Awange in J Geod 77:66–76, 2003) and orthonormal matrix algorithm from Zeng (Earth Planets Space 67:105, 2015. 10.1186/s40623-015-0263-6). [ABSTRACT FROM AUTHOR]