Search

Contamination by potentially toxic metals and metalloids (PTMs) has become a significant health and environmental issue worldwide. Sorption has emerged as one of the most prominent strategies for remediating both soil and water contamination. New sorbents are being developed to provide economically viable and environmentally sound alternatives, in alignment with the principles of the Sustainable Development Goals. This research aimed to assess the potential effects on human health and environmental toxicity following the sorption of cadmium (Cd), lead (Pb), and zinc (Zn) using peat, compost, and biochar as sorbents. The peat was collected in Brazil, a country with a tropical climate, while the compost and biochar were produced from the organic fraction of municipal solid waste (OFMSW). In terms of bioaccessibility, the results showed the following order: compost < biochar < peat for Pb, and compost < peat < biochar for Cd and Zn. There was a significant growth inhibition for Eruca sativa and Zea mays exposed to increasing concentrations of PTMs treated with peat and compost. The presence of contaminants played a decisive role on immobilization of neonates of Ceriodaphnia silvestrii after treatments with compost and, especially, peat. However, the biochar addition rate caused a significant influence on the outcomes of ecotoxicity across all tested species. Although the samples treated with biochar exhibited lower residual concentrations of PTMs than those treated with compost and peat, the inherent toxicity of biochar might be attributed to the material itself. The exposure to residual PTM concentrations post-desorption caused ecotoxic effects on tested species, emphasizing the need to assess PTM desorption potential. Peat, compost, and biochar are promising alternatives for the sorption of PTMs, but the addition rates must be properly adjusted to avoid the occurrence of undesirable ecotoxicological effects. This research offers valuable insights for sustainable environmental management and protection by thoroughly investigating the impacts of different sorbents and contaminants on aquatic and terrestrial ecosystems. [Display omitted] • Pb had lowest bioaccessibility among tested metals when pre-sorbed onto the compost. • The sensitivity order was established as: root length > shoot length > germination. • Eruca sativa displayed higher phytotoxicity compared to Zea mays. • Biochar revealed inherent aquatic ecotoxicity in Ceriodaphnia silvestrii. • The toxicity of peat and compost samples originated from the presence of PTMs. [ABSTRACT FROM AUTHOR]

This paper explores the viability of producing energy and agricultural soil conditioners with biochars and bio-oils from the pyrolysis of biomasses that in some cases are potential environmental pollutants. This approach addresses the need to develop sustainable production systems that minimize pollution and soil degradation, and meet the demand for renewable fuels. Large volumes of biomass from different sources are available in Brazil, including Eucalyptus crop residues (CE), castor meal (CM), coconut pericarp (CP), sugarcane bagasse (SB), and water hyacinth (WH). CM char and SB bio-oil are good prospects for energy generation. Characterization using DRIFT, 13 C NMR, and van Krevelen diagrams indicated that after carbonization, aromatic structures were predominant in the biochars produced from the CP, CE, and SB biomasses, while aliphatic groups were abundant in the biochars from CM and WH. Analysis using EPR showed that unpaired electrons were preferentially located on carbon atoms in the case of the CP, CE, and SB biochars, with EPR g values around 2.0030, while the CM and WH biochars presented g values around 2.0035, indicating that the unpaired electrons were closer to oxygen atoms. In terms of bio-oil chemical composition, the most abundant compounds were 3-pyridinol and furans (WH), phenols (CP), and hexadecanoic, octadecanoic, 9,12-octadecenoic (z,z), 3-docosenoic, and 5-docosenoic acids (present only in the CM bio-oil). The bio-oils from SB and CE were quite similar and the main compound was 1,2,6-hexanetriol. The biomass sources studied produced reasonable amounts of bio-oil, and could compete as suitable raw materials for biofuel production. [ABSTRACT FROM AUTHOR]

The objective of this study was the full characterization of pruning residue from macrophyte Cyperus giganteus from tertiary wastewater treatment plant (WTP), Ponte dos Leites, located in Araruama, RJ, Brazil. Analyses aimed to systematically assess the feasibility of using the pruning residues as an energy resource. To do so, macrophytes were submitted to experimental analyses of their physical properties (real density: 0.44–0.77 g cm−3, bulk density: 0.08–0.09 g cm−3, among other characteristics), chemical and proximate analyses, and thermal analysis. Results of thermal behavior characterized the biomass as a viable energy source (high heat value, 14–16 MJ kg−1). C. giganteus different samples fractions analyses confirmed that molecular structures of the macrophyte (lignin: 17.3–26.8 wt %, cellulose: 27.8–32.6 wt %, hemicellulose: 30.1–31.5 wt %; depending on the plant part) affect thermal decomposition behavior. Maximum mass losses ranged from 83.43 to 75.91%. Energy production potential from biomass pruning residues generated at Ponte dos Leites was estimated to be around 92,400 MJ mês−1. This shows the effectiveness of using pruning residues biomass from macrophyte Cyperus giganteus for energy production, highlighting its energy potential, and support its use as inputs in thermal conversion processes. [Display omitted] • Physical-chemical characterization of Cyperus giganteus pruning residues from CW. • Assessment of C. giganteus biomass thermal properties (TGA, LHV, HHV and UHV). • Potential use of C. giganteus biomass for bioenergy production (biochar). • Potential use of biochar from C. giganteus biomass for agricultural purposes. [ABSTRACT FROM AUTHOR]

Greenhouse gas removal technologies are needed to reach the targets of the UNFCCC Paris Agreement. Among existing technologies, the use of biochar is considered promising, particularly biochar derived from the large quantities of sugarcane residues available in South America and elsewhere. However, the net greenhouse gas removal potential of sugarcane biochar has not been assessed hitherto. We use a scenario-based anticipatory life cycle assessment to investigate the emissions associated with a change from the combustion of sugarcane residues in a combined heat and power plant to the pyrolysis of these residues for biochar production and field application in São Paulo State, Brazil. We define scenarios based on different mean marginal electricity production and biochar production share. The results indicate that emissions from covering the electricity deficit generated by partial combustion of biomass during biochar production is the main emitting process. Overall, the processes associated with biochar production lower the net greenhouse gas benefits of the biochar by around 25%. Our analysis suggests that allocating 100% of the available sugarcane residues to biochar production could sequester 6.3 ± 0.5 t CO 2 eq ha−1 yr−1 of sugarcane in São Paulo State. Scaled up to the entire State, the practice could lead to the removal of 23% of the total amount of GHGs emitted by the State in 2016. • First LCA of sugarcane biochar for GHG removal in Brazil. • Covering the energy deficit created by pyrolysis is the most GHG emitting process. • Lifecycle emissions reduce the net carbon sequestration benefits of biochar by 25%. • Sugarcane residue biochar in São Paulo State, Brazil could sequester 36 Mt CO 2 eq yr−1. [ABSTRACT FROM AUTHOR]

With the advent of mechanized sugarcane harvesting in Brazil around 70 Mt of straw each year is left on the field, and ∼70% of its carbon (C) is decomposed and returned to the atmosphere on the same timeframe. The adoption of a stabilised C product such as biochar as a vehicle for nutrient delivery might address two ends of a problem: to increase nutrient use efficiency by plants while creating a viable and efficient strategy to increase stable C in soil. This study proposed a production route for a biochar fertiliser (BF) from sugarcane straw biochar (SSB), by activation of SSB with KOH and subsequent neutralisation with H 3 PO 4. The phosphorus (P) content of BF (8.6% P) was superior to SSB. It was also noticed that structure of SSB matrix was altered, creating increased sorption capacity, with the fertiliser bound to the biochar rather than physically mixed. The BF was tested in a controlled condition experiment with sugarcane for 120 days using three low P soils with different clay contents (147, 326 and 528 g kg−1). BF led to higher biomass yield (15%) and P use efficiency (PUE) (∼10%) compared to standard P source (triple superphosphate – TSP) in the most clayey soil. The adoption of a fertiliser based on a nutrient enriched biochar can increase the effectiveness of crop production. Enhanced delivery of crop nutrients increases the attractiveness of increased soil C. Image 1 • A novel P rich biochar fertiliser with enhanced features is produced. • Biochar fertiliser and TSP are tested in sugarcane for different soils. • Mean soil pH, over 120 days, for biochar (∼7) is higher than in TSP (∼5). • Biochar fertiliser presents PUE 15% superior than TSP. [ABSTRACT FROM AUTHOR]