Search

[Display omitted] • WTE assessment of biomass residue valorization pathway. • Optimization of WTE via multi-criteria decision method. • Pequi seed without extractives reported improved biochar properties. • Optimal gasification condition was obtained with O 2 /H 2 O/N 2 carrier gas. • WTE could be optimized by the seed fat extraction previously to pyrolysis. The waste-to-energy (WTE) valorization pathway of Caryocar brasiliense (pequi) seeds was investigated via pyrolysis, gasification, and transesterification to understand its potential as biochar, syngas, and biodiesel. First, the pyrolysis (300–700 °C) was conducted in N 2 atmosphere for pequi seeds (PS) and pequi seeds without its extractives (PSWE), characterizing its biochar properties. The PSWE was then gasified at 1000 °C under O 2 /N 2 , O 2 /CO 2 /N 2 and O 2 /H 2 O/N 2 atmospheres to evaluate the characteristics of the producer gas. The PS extractives were then transesterified and characterized for biodiesel production. Finally, a multiple-criteria decision analysis assessed the PS products' potential within the thermochemical routes. The results evidenced better biochar (up to 22.29% HHV enhancement, higher mass and energy yield, up to 75.9 and 85.5% reduction of O/C and H/C, respectively, and enriched N content) via PSWE pyrolysis than PS considering biofuel application and optimistic perceptions for soil amendment. This indicates that the preceding extraction of vegetal fat from PS strengthens the WTE by including further processing of extracted oil. The produced syngas under O 2 /H 2 O/N 2 gasification atmosphere showed better applicability as a biofuel (16.37 MJ·kg−1 lower heating value, 107.33% cold gas efficiency, and 113.55% carbon conversion efficiency) with up to 24% higher success rate. The transesterification of the extractives revealed its potential (98% conversion rate) for use as feedstock for in situ power generation, or blended for biodiesel production. The results provide insights into the circular economy in agro-extractivist communities that may support Brazil's small and medium agro-food industries with their energy demands. [ABSTRACT FROM AUTHOR]

This paper explores the viability of producing energy and agricultural soil conditioners with biochars and bio-oils from the pyrolysis of biomasses that in some cases are potential environmental pollutants. This approach addresses the need to develop sustainable production systems that minimize pollution and soil degradation, and meet the demand for renewable fuels. Large volumes of biomass from different sources are available in Brazil, including Eucalyptus crop residues (CE), castor meal (CM), coconut pericarp (CP), sugarcane bagasse (SB), and water hyacinth (WH). CM char and SB bio-oil are good prospects for energy generation. Characterization using DRIFT, 13 C NMR, and van Krevelen diagrams indicated that after carbonization, aromatic structures were predominant in the biochars produced from the CP, CE, and SB biomasses, while aliphatic groups were abundant in the biochars from CM and WH. Analysis using EPR showed that unpaired electrons were preferentially located on carbon atoms in the case of the CP, CE, and SB biochars, with EPR g values around 2.0030, while the CM and WH biochars presented g values around 2.0035, indicating that the unpaired electrons were closer to oxygen atoms. In terms of bio-oil chemical composition, the most abundant compounds were 3-pyridinol and furans (WH), phenols (CP), and hexadecanoic, octadecanoic, 9,12-octadecenoic (z,z), 3-docosenoic, and 5-docosenoic acids (present only in the CM bio-oil). The bio-oils from SB and CE were quite similar and the main compound was 1,2,6-hexanetriol. The biomass sources studied produced reasonable amounts of bio-oil, and could compete as suitable raw materials for biofuel production. [ABSTRACT FROM AUTHOR]

Production of biofuels via biomass pyrolysis has received a strong emphasis since it may produce a wide variety of renewable fuels in liquid (bio-oil), solid (biochar), and gas (syngas) forms. Sugarcane bagasse, waste from the sugar-alcohol industry, is largely produced in Brazil, India, and Thailand and appears as a great biomass option for pyrolysis due to its properties, abundance, and current underutilization. However, sugarcane bagasse properties and pyrolysis operating conditions may directly affect the product properties, distribution, and further application as fuels and chemicals. Thus, it is necessary a thorough study of these subjects. This review brings an overview of biomass and pyrolysis concepts, as well as a collection of improvements in the production of products (bio-oil, biochar, and gas) via sugarcane bagasse pyrolysis. In addition, this review discusses the interaction between process operating conditions and this biomass type to address how the products' properties and yields are affected. • Fast Pyrolysis: an efficient thermochemical process for bio-oil, biochar, and gas production. • Fast Pyrolysis concepts, operational conditions, and reactor configurations were reviewed. • Bio-oil, biochar, and gas production as an alternative for renewable energy world matrix. • Focus on sugarcane bagasse as a raw material for bio-oil, biochar, and gas production. • Upgrading methods for bio-oil, challenges, and future works in the pyrolysis field. [ABSTRACT FROM AUTHOR]

With the advent of mechanized sugarcane harvesting in Brazil around 70 Mt of straw each year is left on the field, and ∼70% of its carbon (C) is decomposed and returned to the atmosphere on the same timeframe. The adoption of a stabilised C product such as biochar as a vehicle for nutrient delivery might address two ends of a problem: to increase nutrient use efficiency by plants while creating a viable and efficient strategy to increase stable C in soil. This study proposed a production route for a biochar fertiliser (BF) from sugarcane straw biochar (SSB), by activation of SSB with KOH and subsequent neutralisation with H 3 PO 4. The phosphorus (P) content of BF (8.6% P) was superior to SSB. It was also noticed that structure of SSB matrix was altered, creating increased sorption capacity, with the fertiliser bound to the biochar rather than physically mixed. The BF was tested in a controlled condition experiment with sugarcane for 120 days using three low P soils with different clay contents (147, 326 and 528 g kg−1). BF led to higher biomass yield (15%) and P use efficiency (PUE) (∼10%) compared to standard P source (triple superphosphate – TSP) in the most clayey soil. The adoption of a fertiliser based on a nutrient enriched biochar can increase the effectiveness of crop production. Enhanced delivery of crop nutrients increases the attractiveness of increased soil C. Image 1 • A novel P rich biochar fertiliser with enhanced features is produced. • Biochar fertiliser and TSP are tested in sugarcane for different soils. • Mean soil pH, over 120 days, for biochar (∼7) is higher than in TSP (∼5). • Biochar fertiliser presents PUE 15% superior than TSP. [ABSTRACT FROM AUTHOR]