Search

This research aimed to demonstrate the thermal pathway (torrefaction technology) to convert organic waste to be biochar/biocoal. Organic waste (cabbage) from Nonthaburi fresh market, Thailand was used as raw material. Torrefaction technology was processed in horizontal cylindrical batch reactor with Nitrogen gas purging during doing experiment. Temperature profile was preliminary checked to find out lag time. Amount of loaded weight and particle size of material were preliminary tested. Experimental conditions such as time and temperature were tested at 30 and 60 minutes, and range temperature of 220 to 300°C. Important property of product; calorific value of product in form of high heating value (HHV) and mass yield percentage were measured. The optimal conditions were evaluated with two parameters; increase of HHV compared to reference condition and % mass yield. Increase temperature was significant effect to increase HHV value of biochar. The optimal time and temperature for getting the highest heating value were 60 minutes and 280°C. [ABSTRACT FROM AUTHOR]

The highly acid sulfate Rangsit soil series of Rangsit, Pathum-Thani district, Thailand poses a major problem for agriculture in the area. Water hyacinth is a naturally occurring weed that can grow aggressively, causing eutrophication and leading to many severe environmental impacts. Here, through the pyrolysis process, we convert water hyacinth to biochar and use it for acid soil amendment. We found the ratio between biochar, soil, and sand suitable for the cultivation of water convolvulus to be 50 g of biochar, 400 g of soil, and 100 g of sand (1:8:2). This soil mixture improved the pH of the soil from 4.73 to 7.57. The plant height of the water convolvulus grown in the soil mixture was the greatest at 20.45 cm and the plant weight with and without roots was greatest at 2.23 g and 2.52 g, respectively. Moreover, we demonstrated the dominance and high abundance of Bacillus among the community in soil with biochar amendment. Here we provide the first assessment of the appropriate amount of water hyacinth-derived biochar for mitigation of soil acidity and promotion of optimal water convolvulus growth. Moreover, biochar can optimally modify soil bacterial communities that benefit plant development. [ABSTRACT FROM AUTHOR]

Agricultural waste is a major problem in Thailand. To eliminate waste and constrain global warming, waste should be renewed for other purposes by thermochemical processes. Pyrolysis is a process that produces biochar, which is useful for amending soil, improving soil fertility, and creating microorganism habitats. This research aimed to produce biochar from agricultural wastes for use as a mushroom substrate and to increase the nutrient consumption by the mushrooms. Sugarcane leaf biochar had the lowest C:N ratio and neutral pH, which are important factors for Pleurotus pulmonarius mycelium growth and the formation of fruiting bodies. Moreover, this biochar has micropores suitable for fungal growth. According to the nutrient measurements, the proximate analysis showed that 1% sugarcane leaf biochar produced a higher yield and protein content than the others, whereas the biochar reduced the fat content but increased the moisture in the fruiting body, including aeration increasing. Thus, 1% sugarcane leaf biochar was suitable as an extra substrate for growing grey oyster mushrooms. From the result of this research, biochar production is an excellent process to convert agricultural wastes to be a renewable resource for improving the efficiency of crop production. [ABSTRACT FROM AUTHOR]

Soil erosion due to land use change is a major concern in agricultural areas. There is an urgent need to develop appropriate agricultural practices that promote higher biodiversity and improve soil properties. Little is known about the processes of natural vegetation recovery after disturbance by human activities in tropical humid climates. This is particularly the case for dispersion by water (hydrochory) that affects seeds. The displacement of native plant seeds on the soil surface by runoff may be influenced by soil properties and by the use of biochar in agriculture. As these effects have not been documented in tropical agroecosystems and on steep slopes, we present here an in‐field experiment on a steeply sloping maize field affected by rainfall and tillage erosion in Northern Thailand. Our objectives were to test the effect of catena position and biochar use on seed displacement, soil loss and nutrient losses. We used 24 plots of 1 m2 located at four positions in the catena. Two treatments were tested: (1) conventional system with tillage and (2) biochar incorporated into the soil. We measured the displacement of plastic beads (to imitate round seeds), runoff volume, soil and nutrient losses and soil surface features during in‐situ rainfall simulations. After two simulated rainfall events and four natural rainfall events, total bead exportation was 7.2%. We found that catena position and biochar had an impact on runoff, soil and nutrient losses. In this study, previously incorporated biochar reappeared at the soil surface after 8 months under natural conditions and acted like a crust at the soil surface. This biochar crust increased runoff, increased potassium concentration and decreased phosphorus concentration in runoff, decreased bead displacement and had no effect on soil loss. This study, under tropical climate and steep slope conditions, highlights differences in soil surface features and runoff along the catena. We should consider catena position for improving soil management and using appropriate agroecological practices. Highlights: The effect of catena position and biochar use on seed displacement, soil loss and nutrient losses were tested.These effects have not been documented in tropical agroecosystems and steep slopes.Catena position and biochar use had an impact on runoff, soil and nutrient losses.Catena position for improving soil management and using agroecological practices should be considered. [ABSTRACT FROM AUTHOR]

The mitigation of greenhouse gas (GHG) emissions and water usage optimization in rice cultivation is challenging for many agricultural countries, including Thailand, who have set goals of reaching net zero emissions and coping with droughts caused by climate change. Alternate wetting and drying (AWD) and biochar application are possible practices for achieving cleaner rice production through reduction of GHG emissions and water consumption. However, these methods' potential varies by site, especially in areas with limited control of water levels. This study assessed the effects of AWD at different drying levels (10, 15, and 20 cm below the soil surface) and rice straw biochar on GHG emissions, yield production, water use, soil characteristics, and economic aspects. This study was conducted over two rice cultivation seasons: a major season in 2022 and a second season in 2023 at a field in Kalasin Province, northeastern Thailand. Using AWD and biochar reduced annual GHG emissions by 48.2% and 8.01%, respectively. Deeper drying levels of AWD showed greater mitigation potential than shallow levels. The combination of AWD and biochar had additional potential for GHG mitigation, however, this impact did not show statistical change as compared to their separate potentials. The adoption of AWD and biochar could also maintain the amount of rice yield compared to traditional practice. All levels of AWD saved irrigation water consumption by an average of 16.8% per season; the highest potential was observed in AWD at 10 cm below the soil surface. Biochar improved soil health after two seasons by enhancing soil pH and organic carbon sequestration. The combination of AWD and biochar did not additionally augment the capacity in water saving of AWD or soil improvement of biochar. The AWD water regime also did not increase net profits, while biochar decreased net profits due to the required investment in biochar production. Using AWD is a feasible way to mitigate GHG emissions and save water without affecting rice productivity and net profits in northeastern Thailand. [Display omitted] • Alternate wetting and drying (AWD) mitigated greenhouse gas emissions by 48.2%. • AWD reduced irrigation water use by an average of 16.8%. • AWD at 15 cm of drying level without biochar is suggested as a mitigation tool. • Rice straw biochar showed the significant impact on soil organic carbon stock. [ABSTRACT FROM AUTHOR]

This study examines the conversion of durian peel to biochar and pyrolysis liquid via slow pyrolysis. The central composite design was utilized to optimize the conditions of three independent variables, namely pyrolysis temperature, cooling temperature, and holding time. Analysis of variance revealed that only pyrolysis temperature had a significant effect on biochar and pyrolysis liquid yields. The biochar and pyrolysis liquid yields fit by a second-order polynomial model agreed well with experimental results. As the pyrolysis temperature increased, the solid product yield decreased, while the pyrolysis liquid yield increased. The highest biochar and pyrolysis liquid yields were 56.11% and 38.53% that derive at 300 and 600 °C of pyrolysis temperature, respectively. The validation of both prediction models showed over 96% agreement. Biochar of high heating value (26.55 MJ/kg) was obtained at 600 °C pyrolysis temperature and 30 min holding time. According to the Van Krevelen plot, the molar ratios of the H/C and O/C of the biochar obtained at 600 °C of pyrolysis temperatures were similar to coal material. The high-quality biochar was of carbon storage class 4 according to the IBI classification; and the characteristics of pyrolysis liquid met community product standards of Thailand. An economic analysis was performed to assess the feasibility of converting 60 tons/year of durian peel into biochar and pyrolysis liquid. An internal project rate of return (IRR) of 25.91% with a payback period of 1.58 years was estimated. The findings of this study indicate the economic viability of immediately deploying large-scale pyrolysis utilizing a waste stream from agriculture. [Display omitted] • Pyrolysis temperature mainly determined biochar and pyrolysis liquid yields. • Maximum biochar (56%) and pyrolysis liquid yields (38%) were determined. • The biochar is rated as a high-class 4 of carbon storage by the IBI. • The durian peel pyrolysis liquid met community product standards of Thailand. • In an economic study IRR is 25.91% with a payback period of 1.58 years. [ABSTRACT FROM AUTHOR]

Durian peel is a type of biomass derived from agricultural residues, which are found in abundant in Thailand. This study aims to investigate the thermal and chemical properties of three indigenous durian peels, namely Monthong (MDP), Puangmanee (PDP), and Bacho (BDP), as well as the characteristics of biochar and pyrolysis liquid derived from slow pyrolysis of the durian peel. MDP had the greatest volatile matter and fixed carbon content, with 73.97 and 18.43 wt%, respectively. MDP was applied for further research in order to produce biochar and pyrolysis liquid at pyrolysis temperatures of 400 and 600 °C. The maximum biochar yield was 36.01% at 400 °C, while the maximum pyrolysis liquid yield was 37.25% at 600 °C. The largest high heating value of biochar (24.48 MJ kg−1) was obtained at 600 °C more than the high heating value of feedstock (14.32 MJ kg−1). Biochar obtained at 400 °C can be categorized as fertilizer class 4, while biochar obtained at 600 °C can be classified as carbon storage class 2 using the IBI biochar classification tool. The quality of the pyrolysis liquid was determined to be of 3.14 pH and 1.052 g mL−1 specific gravity at a pyrolysis temperature of 600 °C, which meets Thailand standards. As a result, both 400 °C and 600 °C pyrolysis liquids produced significant chemicals that are employed in a variety of industries. Consequently, this research is strongly recommended to be expanded to produce high-quality durian peel biochar and pyrolysis liquid. [Display omitted] • Comprehensive physical, chemical, thermal properties of durian peels were explored. • Durian peel biochar can be categorized by the IBI as carbon storage class 2. • The biochar can be classified by the IBI as a high fertilizer class 4. • Pyrolysis liquid derived from the durian peel meet Thailand standards. • 81 main compounds with essential chemicals were detected in the pyrolysis liquids. [ABSTRACT FROM AUTHOR]

The in-field burning of sugarcane leaf residues presents a major environmental and health burden in Thailand. In this study, sugarcane leaves were converted into a biochar-based slow release phosphorus (P) fertilizer via pyrolysis at 600 °C, and the influence of pre- and post-pyrolysis treatment on the P loading and release was investigated. The sugarcane leaves were pre-treated with an alkaline (diammonium phosphate, DAP) or an acidic P source (phosphoric acid, PA), with or without addition of MgO. Additionally, the biochar was post-treated with DAP to increase the P loading. Extraction of P in DI water and 2% formic acid were used as indicators for potential slow release. The microporous biochars had a specific surface area of 69–333 m2 g−1 and pre-treatment resulted in a P content of 34–82 g kg−1. When MgO was included in the pre-treatment, XRD analysis confirmed formation of crystalline Mg 2 P 2 O 7 , irrespective of the P source. This Mg 2 P 2 O 7 was responsible for slow P release in DI water over 240 h via a dissolution-controlled process. Post-treatment with DAP increased the P loading to 156 g kg−1 in the form of water-soluble monoammonium phosphate (MAP), which did not contribute to slow release. The tunable P release via combinations of pre- and post-pyrolysis treatment makes these engineered biochars attractive as P sources for crops and presents an attractive solution to mitigate in-field sugarcane residue burning. [Display omitted] • P-loaded biochar was prepared by co-pyrolysis of sugarcane leaves with P + MgO. • Addition of MgO in pre-pyrolysis treatment results in slow release of P. • The slow P release is controlled by dissolution of Mg 2 P 2 O 7. • Post-treatment with DAP increases water-soluble P but not slow-release P. [ABSTRACT FROM AUTHOR]

Production of biofuels via biomass pyrolysis has received a strong emphasis since it may produce a wide variety of renewable fuels in liquid (bio-oil), solid (biochar), and gas (syngas) forms. Sugarcane bagasse, waste from the sugar-alcohol industry, is largely produced in Brazil, India, and Thailand and appears as a great biomass option for pyrolysis due to its properties, abundance, and current underutilization. However, sugarcane bagasse properties and pyrolysis operating conditions may directly affect the product properties, distribution, and further application as fuels and chemicals. Thus, it is necessary a thorough study of these subjects. This review brings an overview of biomass and pyrolysis concepts, as well as a collection of improvements in the production of products (bio-oil, biochar, and gas) via sugarcane bagasse pyrolysis. In addition, this review discusses the interaction between process operating conditions and this biomass type to address how the products' properties and yields are affected. • Fast Pyrolysis: an efficient thermochemical process for bio-oil, biochar, and gas production. • Fast Pyrolysis concepts, operational conditions, and reactor configurations were reviewed. • Bio-oil, biochar, and gas production as an alternative for renewable energy world matrix. • Focus on sugarcane bagasse as a raw material for bio-oil, biochar, and gas production. • Upgrading methods for bio-oil, challenges, and future works in the pyrolysis field. [ABSTRACT FROM AUTHOR]