Search

Enterprise efficiency is limited by data exchange. A product designer might specify the geometry of a product with a Computer Aided Design program, an engineer might re-use that geometry data to calculate physical properties of the product using a Finite Element Analysis program. These different domains place different requirements on the product representation. Representations of product data required for different tasks is dependent on the vendor software associated with those tasks, sharing data between different vendor programs is limited by incompatibility of the vendor formats used. In the case of Computer Aided Design where the virtual form of an object is modelled, no standard data format captures complete model data. Common data standards transfer model surface geometry without capturing the topological elements from which these geometries are constructed. There are prescriptive data representations to allow these features to be specified in a neutral format, but little incentive for vendors to adopt these schemes. Recent efforts instead focus on identifying similar feature elements between different vendor CAD programs, however this approach relies on onerous manual identification requiring frequent revision. This research develops methods to automate the task of mapping relationships between different data format representations. Two independent matching techniques identify similar CAD feature functions between heterogeneous programs. Text similarity and object geometry matching techniques are combined to match the data formats associated with CAD programs. An efficient search for matching function parameters is performed using a genetic algorithm that incorporates semantic data matching and geometry data matching. A greedy semantic matching algorithm is developed that compares with the Doc2vec short text matching technique over the API dataset tested. A SVD geometric surface registration technique is developed that requires fewer calculations than an equivalent Iterative Closest Point method.

Financial contagion refers to a scenario in which small shocks, which initially affect only a few financial institutions or a particular region of the economy, spread to the rest of the financial sector and other countries whose economies were previously healthy. This resembles the “transmission” of a medical disease. Financial contagion happens both at domestic level and international level. At domestic level, usually the failure of a domestic bank or financial intermediary triggers transmission by defaulting on inter-bank liabilities, selling assets in a fire sale, and undermining confidence in similar banks. An example of this phenomenon is the failure of Lehman Brothers and the subsequent turmoil in the US financial markets. International financial contagion happens in both advanced economies and developing economies, and is the transmission of financial crises across financial markets. Within the current globalise financial system, with large volumes of cash flow and cross-regional operations of large banks and hedge funds, financial contagion usually happens simultaneously among both domestic institutions and across countries. There is no conclusive definition of financial contagion, most research papers study contagion by analyzing the change in the variance-covariance matrix during the period of market turmoil. King and Wadhwani (1990) first test the correlations between the US, UK and Japan, during the US stock market crash of 1987. Boyer (1997) finds significant increases in correlation during financial crises, and reinforces a definition of financial contagion as a correlation changing during the crash period. Forbes and Rigobon (2002) give a definition of financial contagion. In their work, the term interdependence is used as the alternative to contagion. They claim that for the period they study, there is no contagion but only interdependence. Interdependence leads to common price movements during periods both of stability and turmoil. In the past two decades, many studies (e.g. Kaminsky et at., 1998; Kaminsky 1999) have developed early warning systems focused on the origins of financial crises rather than on financial contagion. Further authors (e.g. Forbes and Rigobon, 2002; Caporale et al, 2005), on the other hand, have focused on studying contagion or interdependence. In this thesis, an overall mechanism is proposed that simulates characteristics of propagating crisis through contagion. Within that scope, a new co-evolutionary market model is developed, where some of the technical traders change their behaviour during crisis to transform into herd traders making their decisions based on market sentiment rather than underlying strategies or factors. The thesis focuses on the transformation of market interdependence into contagion and on the contagion effects. The author first build a multi-national platform to allow different type of players to trade implementing their own rules and considering information from the domestic and a foreign market. Traders’ strategies and the performance of the simulated domestic market are trained using historical prices on both markets, and optimizing artificial market’s parameters through immune - particle swarm optimization techniques (I-PSO). The author also introduces a mechanism contributing to the transformation of technical into herd traders. A generalized auto-regressive conditional heteroscedasticity - copula (GARCH-copula) is further applied to calculate the tail dependence between the affected market and the origin of the crisis, and that parameter is used in the fitness function for selecting the best solutions within the evolving population of possible model parameters, and therefore in the optimization criteria for contagion simulation. The overall model is also applied in predictive mode, where the author optimize in the pre-crisis period using data from the domestic market and the crisis-origin foreign market, and predict in the crisis period using data from the foreign market and predicting the affected domestic market.

A novel real-time control method that minimises linear system vibrations when it is subjected to an arbitrary external excitation is proposed in this study. The work deals with a discrete differential dynamic programming type of problem, in which an external disturbance is controlled over a time horizon by a control force strategy constituted by the well-known convolution approach. The proposed method states that if a control strategy can be established to restore an impulse external disturbance, then the convolution concept can be used to generate an overall control strategy to control the system response when it is subjected to an arbitrary external disturbance. The arbitrary disturbance is divided into impulses and by simply scaling, shifting and summation of the obtained control strategy against the impulse input for each impulse of the arbitrary disturbance, the overall control strategy will be established. Genetic Algorithm was adopted to obtain an optimal control force plan to suppress the system vibrations when it is subjected to a shock disturbance, and then the Convolution concept was used to enable the system response to be controlled in real-time using the obtained control strategy. Numerical tests were carried out on a two-degree of freedom quarter-vehicle active suspension model and the results were compared with results generated using the Linear Quadratic Regulator (LQR) method. The method was also applied to control the vibration of a seven-degree of freedom full-vehicle active suspension model. In addition, the effect of a time delay on the performance of the proposed approach was also studied. To demonstrate the applicability of the proposed method in real-time control, experimental tests were performed on a quarter-vehicle test rig equipped with a pneumatic active suspension. Numerical and experimental results showed the effectiveness of the proposed method in reducing the vehicle vibrations. One of the main contributions of this work besides using the Convolution concept to provide a real time control strategy is the reduction in the number of sensors needed to construct the proposed method as the disturbance amplitude is the only parameter needed to be measured (known). Finally, having achieved what has been proposed above, a generic robust control method is accomplished, which not only can be applied for active suspension systems but also in many other fields.

The planning of distribution systems consists in determining the optimum site and size of new substations and feeders in order to satisfy the future power demand with minimum investment and operational costs and an acceptable level of reliability. This problem is a combinatorial, non-linear and constrained optimization problem. Several solution methods based on genetic algorithms have been reported in the literature; however, some of these methods have been reported with applications to small systems while others have long solution time. In addition, the vast majority of the developed methods handle planning problems simplifying them as single-objective problems but, there are some planning aspects that can not be combined into a single scalar objective; therefore, they require to be treated separately. The cause of these shortcomings is the poor representation of the potential solutions and their genetic operators This thesis presents the design of a genetic algorithm using a direct representation technique and specialized genetic operators for power distribution system expansion planning problems. These operators effectively preserve and exploit critical configurations that contribute to the optimization of the objective function. The constraints of the problems are efficiently handle with new strategies. The genetic algorithm was tested on several theoretical and real large-scale power distribution systems. Problems of network reconfiguration for loss reduction were also included in order to show the potential of the algorithm to resolve operational problems. Both single-objective and multi-objective formulations were considered in the tests. The results were compared with results from other heuristic methods such as ant colony system algorithms, evolutionary programming, differential evolution and other genetic algorithms reported in the literature. From these comparisons it was concluded that the proposed genetic algorithm is suitable to resolve problems of largescale power distribution system planning. Moreover, the algorithm proved to be effective, efficient and robust with better performance than other previous methods.

The ultimate goal in robotics is to create machines which are more independent and rely less on humans to guide them in their operation. There are many sub-systems which may be present in such a robot, one of which is path planning — the ability to determine a sequence of positions or configurations between an initial and goal position within a particular obstacle cluttered workspace. Many classical path planning techniques have been developed, but these tend to have drawbacks such as their computational requirements; the suitability of the plans they produce for a particular application; or how well they are able to generalise to unseen problems. In recent years, evolutionary based problem solving techniques have seen a rise in popularity, possibly coinciding with the improvement in the computational power afforded researches by successful developments in hardware. These techniques adopt some of the features of natural evolution and mimic them in a computer. The increase in the number of publications in the areas of Genetic Algorithms (GA) and Genetic Programming (GP) demonstrate the success achieved when applying these techniques to ever more problem areas. This dissertation presents research conducted to determine whether there is a place for Evolutionary Approaches, and specifically GA and GP, in the development of future path planning techniques.