Search

Ceftriaxone sodium is a widely used antimicrobial, which is only available as a lyophilized powder. The presence of methods for evaluating the quality of this product is very important and helps to ensure its effectiveness, in addition to contributing to the fight against bacterial resistance. Therefore, a clean and sustainable high-performance liquid chromatography (HPLC) method has been developed for evaluating ceftriaxone stability in pharmaceutical product. A Zorbax SB C18 (150 × 4.6 mm, 5 μm) column was maintained at 25°C; the mobile phase consisted of purified water acidified with 0.2% orthophosphoric acid and ethanol (87: 13, v/v) at a flow rate of 0.9 mL min−1. The detection wavelength was set at 260 nm. The method was linear over a concentration range of 20–120 μg mL−1, precise with relative standard deviations <2%, robust in the event of minor changes to the original method conditions, accurate with recovery between 98% and 102% and specific to degradation products. The retention time for ceftriaxone sodium was ~4.6 minutes. This work shows an ecologically correct option by HPLC method for the evaluation of ceftriaxone sodium in pharmaceutical product, as well as its stability, which addresses the requirements of the current green and sustainable analytical chemistry. [ABSTRACT FROM AUTHOR]

Background: Ceftriaxone sodium, an antimicrobial used in parenteral form, does not have a microbiological method by turbidimetry described in the literature. For drugs from antimicrobial class, the existence of a microbiological method for assessing their potency is essential. Not only are the results from the physical-chemical methods enough, but microbiological analyzes are also necessary. Objective and Methods: Thus, this paper reports the development and validation of an efficient, accurate, reproducible, fast, and low-cost microbiological assay by turbidimetry to quantify ceftriaxone sodium in powder for injection. Water was used as the diluent to prepare the ceftriaxone solutions. BHI broth as used as culture media for the growth of the S. aureus ATCC 6538 at 9%. Results: The method was linear in the range of 100–196 mg/mL, selective against the sample adjuvants and the forced degradation test, precise (intraday RSD 4.53%, interday RSD 3.85% and between analysts tcalculated 0.14<2.23 tcritical), accurate with recovery of 100.33% and robust against minor changes in the volume of culture medium used, wavelength, incubation time, and inoculum concentration. Conclusions and Highlights: The turbidimetric method developed in this paper is a convenient and valuable alternative to the routine quality control of ceftriaxone sodium in powder for injection, since it allows a reliable quantification and can be used to complement the physical-chemical analysis. [ABSTRACT FROM AUTHOR]

Ceftriaxone sodium is a third-generation semi-synthetic antibiotic belonging to the class of cephalosporins. Is administered only by parenteral route and has the ability to cross the blood-brain barrier. It has bactericidal action; its main activity is related to the Gram-negative bacteria, being also able to act against Gram-negative bacilli resistant to the first- and second-generation cephalosporins. The present study presents a survey of the characteristics, properties and analytical methods used for the determination of ceftriaxone sodium, for the gathering of data searches were carried out in scientific articles in the world literature, as well as in the official compendia. It is necessary to create awareness about the importance of developing effective and reliable analytical methods for quality control and consequently for conducting pharmacokinetic, bioavailability, bioequivalence studies as well as for the therapeutic monitoring of this drug. Most of the methods found use high-performance liquid chromatography, but also methods that use absorption spectroscopy ultraviolet, infrared spectroscopy, spectrofluorimetry and microbiological methods have been presented. A discussion was presented highlighting the need to develop new ecological methods using less toxic solvents, rapid analysis and miniaturization of the samples. [ABSTRACT FROM AUTHOR]

Diabetes mellitus (DM) is considered a public health problem. The initial treatment consists of improving the lifestyle and making changes in the diet. When these changes are not enough, the use of medication becomes necessary. The metformin aims to reduce the hepatic production of glucose and is the preferred treatment for type 2. The objective is to survey the characteristics and properties of metformin, as well as hold a discussion on the existing analytical methods to green chemistry and their impacts for both the operator and the environment. For the survey, data searches were conducted by scientific papers in the literature as well as in official compendium. The characteristics and properties are shown, also, methods using liquid chromatography techniques, titration, absorption spectrophotometry in the ultraviolet and the infrared region. Most of the methods presented are not green chemistry oriented. It is necessary the awareness of everyone involved in the optimization of the methods applied through the implementation of green chemistry to determine the metformin. [ABSTRACT FROM AUTHOR]

In mixedwood boreal forests of western Canada, stands classified as “pure deciduous” by forest inventories sometimes contain a few large white spruce (Picea glauca (Moench) Voss) trees among or emerging from the canopy. These trees are important as regeneration seed sources and for habitat structure. Neither their abundance nor the characteristics of stands in which they occur have previously been quantified. Of 275 “pure aspen” stands in northeastern Alberta, 19.6% contained at least one such spruce detectable in an aerial photograph. These trees were found in stands across the range of sampled canopy heights, densities, age classes, and stand sizes and were often present in the interior of stands, not just on the perimeter. The frequency of 3 ha cells containing at least one spruce was related to (i) stand shape and size, (ii) amount of mature white spruce in adjacent forest, (iii) canopy height, (iv) stand age, and (v) stand density. We conclude that such trees are relatively abundant and widely distributed within the boreal mixedwood forests of Alberta. There is presently no provision to maintain this landscape element within managed forests. More information is needed to determine if or how they should be considered in forest management planning. [ABSTRACT FROM AUTHOR]

This study presents the first black spruce, balsam fir and larch tree ring width chronologies from Labrador. It uses a multi-species perspective to study the radial growth response of alpine treeline species in the Mealy Mountains to local and regional climate variables using bootstrapped correlation analysis. The radial growth response of black and white spruce trees is positively sensitive to growing season air temperatures and sea surface temperatures (SSTs) in the vicinity of the Grand Banks. Moisture originating from warm SSTs in the adjacent Labrador Sea appears to affect moisture-sensitive white spruce and balsam fir trees negatively in the Mealy Mountains. Comparative analysis of 4 tree-ring time series indicates that periods of larch sawfly outbreaks have occurred in the Mealy Mountains and that these events exert a significant amount of influence on the radial growth of larch trees in the Mealy Mountains. These inferred periods of insect infestations coincide with others reported in Quebec. Growing season (June-September) temperature is reconstructed for the Mealy Mountains using merged spruce tree ring width chronologies (1847-2004). The reconstruction is in accordance with other reconstructions at regional and hemispheric scales. The sensitivity of spruce trees to local temperature and precipitation is unstable throughout the period of instrumental record due to moisture effects. Further, spruce trees in the Mealy Mountains show evidence of divergence from air temperatures over the last several decades. [ABSTRACT FROM AUTHOR]

Abstract: Bacteroides fragilis is the anaerobe most frequently isolated from clinical specimens and piperacillin/tazobactam is among the drugs that can be used to treat polymicrobial infections in which this bacteria is often involved. During antibiotic therapy, inhibitory concentrations of antibiotics are always followed by subinhibitory concentrations which can generate phenotypic changes in bacteria. So, in this study we aimed to evaluate changes in the proteomic profile of B. fragilis grown in a sub-MIC of PTZ, using 2-D electrophoresis followed by matrix-assisted laser desorption/ionization time-of-flight/time of-flight. Analysis of the 2-DE gels showed 18 spots with significantly different volume percentages between experimental conditions and 12 were successfully identified by MS/MS. Two proteins with decreased abundance in sub-MIC condition were involved in the glycolysis (glyceraldehyde-3-phosphate dehydrogenase and triose phosphate isomerase), others two involved in amino acid metabolism (Oxoacyl-(acyl-carrier protein) synthase II and dihydrodipicolinate reductase), and finally, one protein involved in fatty acid metabolism (UDP-N-acetylglucosamine acyltransferase). Among the proteins with increased abundance, we founded three ATP synthase (alpha, beta, and alpha type V), which could be involved in antibiotic bacterial resistance by efflux pump, one protein involved in glycolysis (enolase), and one involved in protein degradation (aminoacyl-histidine dipeptidase). In conclusion, our data show overall changes in the proteome of B. fragilis conducted by sub-MIC of PTZ, whose consequences on bacterial physiology deserve further investigation. [Copyright &y& Elsevier]