Search

Magnetic separation of photocatalysts holds great promise for water treatment. A magnetic separation method has a positive effect on the recovery of catalysts after degradation. In this paper, an efficient and reusable catalytic system is developed based on coating magnetic Fe3O4 by depositing Fe2+ on the surface of ZnO. The Fe3O4/ZnO nanocomposite exhibits enhanced performance for organic pollutant degradation. The Fe3O4/ZnO system demonstrates a high photocatalytic activity of 100% degradation efficiency in Rhodamine B (RhB) degradation under UV light irradiation for 50 min. The excellent photocatalytic activity is primarily due to the separation of photogenerated electron-hole pairs being facilitated by the strong interaction between Fe3O4 and ZnO. The induction of the magnetic Fe3O4 endows the Fe3O4/ZnO composite with superior magnetic separation capability from water. Experiments with different radical scavengers revealed that the hydroxyl radical (·OH) is the key reactive radical for the effective degradation of RhB. This work innovatively affords a common interfacial dopant deposition strategy for catalytic application in the degradation of organic dye pollutants and catalyst separation from wastewater efficiently. [ABSTRACT FROM AUTHOR]

The release of industrial effluents into fresh water is a major contributor of water contamination. Therefore, it is highly desirable to develop a viable solution to this alarming issue to improve the quality of clean water. To enhance the photocatalytic efficiency and hence utilization ratio of CuO, a series of CuO–FeSe2 composites with different varying contents of FeSe2 were prepared through facile synthetic methods. X-ray diffraction (XRD) and energy-dispersive X-rays (EDX) analysis verified that the samples were successfully prepared without any contaminating phases. The average crystallite sizes of CuO and FeSe2 were computed to be 29 and 21 nm respectively. For the CuO–FeSe2 composites, the crystallite sizes varied between 25 and 27 nm. The morphology of CuO was comprised of needle-shaped structures, whereas that of FeSe2 was observed to be flower-shaped structures comprising of irregular crystals. A red shift in the bandgap of CuO–FeSe2 composites was observed with the increase in FeSe2 concentration. The prepared photocatalysts were utilized to evaluate their efficiency under visible light against Rhodamine B (RhB). Among all the prepared composites, CuO–75% FeSe2 revealed a remarkable performance and degraded 96% RhB in 180 min. Rate constants for the degradation of the dye were determined by applying the Langmuir–Hinshelwood model. [ABSTRACT FROM AUTHOR]

Herein, we have designed polyfunctional materials of d10‐configuration Cd (II) "Cd‐CP." The coordination polymer Cd‐CP was synthesized using benzene‐1,4‐dicarboxylic acid and 3,5‐diaminotriazole via solvothermal reaction. The Cd‐CP has been fully characterized by using single X‐ray crystallography, thermogravimetric analysis (TGA), Fourier transform–infrared (FT‐IR) spectroscopy, Raman spectroscopy, scanning electron microscopy (SEM), powder X‐ray diffraction (PXRD), and Brunauer–Emmett–Teller (BET) analysis. Single crystal X‐ray crystallography revealed that the CP‐Cd crystallized in triclinic space group P – 1 with the chemical composition [(BDC)(DAT)2Cd2Cl] (CH3)2 NH2+ · H2O. The present study investigated the impact of different reaction parameters, including the concentration of MG, the dosage of catalyst, and the duration of irradiation, on the outcome demonstrating a high level of photocatalytic efficacy at 99.19% under visible light irradiation. The obtained kinetic data exhibited conformity with a pseudo‐first‐order model, indicating that the rate‐determining step is likely to be photo‐absorption. The value of the apparent rate constant was found to be 0.019 min−1 for 50 mg L−1, 0.016 min−1 for 100 mg L−1, and 0.015 min−1 for 150 mg L−1 MG concentration. The corresponding half‐life time was found to be 36.44, 43.31, and 46.20 min with values of correlation coefficient (R2) as 0.99, 0.93, and 0.98, respectively. Moreover, a trapping experiment was conducted to demonstrate that hydroxy radicals (•OH) are the principal reactive oxygen species (ROS) responsible for the degradation of MG. The results of the total organic carbon (TOC) study indicated a mineralization value of around 89%, suggesting that the dye has been completely degraded into non‐toxic by‐products such as carbon dioxide (CO2) and water (H2O). [ABSTRACT FROM AUTHOR]

In this paper, three-dimensional TiO2 nanoflowers (NFs) were prepared by a facile hydrothermal method, and Ag3PO4 was grown in situ following alkali treatment to design and synthesize a Ag3PO4/OH/TiO2 catalyst with excellent photocatalytic activity under visible light. The test results show that the photocatalytic degradation performance of TiO2 NFs after alkali treatment and Ag3PO4 loading is significantly improved. This is because the alkali treatment and the introduction of Ag3PO4 can provide a large amount of –OH, which can be converted to ˙OH under UV irradiation, followed by an increase in the number of active radicals to enhance the photocatalytic degradation performance. Meanwhile, the introduction of Ag3PO4 can effectively improve the light absorption ability of the photocatalyst. Moreover, the in situ growth of Ag3PO4 on TiO2 NFs can construct a high-quality Ag3PO4/TiO2 heterojunction to promote the charge separation and transport. Therefore, the degradation rate of Ag3PO4/OH/TiO2 can reach 90% after 30 min for degrading 3 mg L−1 RhB under visible light. The Ag3PO4/OH/TiO2 photocatalyst designed in the present work provides a new tool for the degradation of organic dyes. [ABSTRACT FROM AUTHOR]

In the current research, new metal complexes have been synthesized by using the greener synthetic approach in which 3‐Nitroaniline reacts with the elements of group‐IIB and group‐IVB. According to this method, ligand and metals were dissolved in 1,4‐dioxane and stirred at room temperature for a specific time period. The method for the preparation of metal‐base complexes is quite simple and cost‐effective. To identify the synthesized compounds various physio‐chemical analytical techniques were used such as Melting point, FT‐Raman Spectroscopy, FT‐IR Spectroscopy, Thermogravimetric analysis, and Scanning electron microscope (SEM) that provide significant data about the general structural characteristics of synthesized compounds. The percentage degradation efficiency of synthetic dyes was obtained as 57 %, 66 %, and 97 % using the synthesized compounds as photocatalysts. A statistical tool, RSM was used for the optimization of parameters (Concentration of Dye, Dose of Catalyst, and contact time). [ABSTRACT FROM AUTHOR]

Industrial wastewater has detrimental impacts on aquatic ecosystems and the environment. Among the significant contributors to water pollution are organic dyes, which are frequently released into untreated outflow water. Hence, effective degradation of these dyes and their derivatives using heterogeneous photocatalysts is imperative before discharge. In this study, we successfully synthesized a novel nanocomposite by g-C3N4 coupled with TiO2 and decorated it with Ni followed by cost-effective methods. Immaculate g-C3N4 coupled with TiO2 (TiO2+) and modified with nickel (Ni+) was synthesized through melamine calcination followed by hydrothermal processing. Characterization through diverse electro-analytical techniques, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), and Brunauer-Emmett-Teller (BET), was conducted on the novel photocatalysts. XRD results revealed their high crystallinity, enhanced through modification. The effectiveness of these photocatalysts in degrading the organic dye methylene blue (MB) under UV–Vis light was thoroughly investigated. It also investigated how the results were affected by important factors involving contact time, dye and photocatalyst dosages, pH, and reusability. Among the photocatalysts, the composite g-C3N4-TiO2s, decorated with Ni, exhibited exceptional performance, displaying substantial degradation efficacy. The findings demonstrate that the novel g-C3N4-based photocatalysts are highly efficient at degrading organic dyes, so the work is expected to be the best contribution in the photodegradation study of organic contaminants. [ABSTRACT FROM AUTHOR]

[Display omitted] • Nanosized ZnGa 2 O 4 :Cu was designed for continuously degrading pollutants. • The doping of Cu(II) highly increased the persistent production and availability of active species. • •H radicals were identified as the main active species. • A possible mechanism for the persistent degradation of dyes was proposed. Photocatalysis is considered as an environmentally friendly and sustainable method as it can produce active species to degrade pollutants. However, its applications are hindered by the turbidity of pollutants and the requirements for continuous or repeated in situ irradiation. To avoid the need for continuous in situ irradiation in the photocatalytic process, herein we report the doping of Cu(II) ions into zinc gallate (ZnGa 2 O 4) as traps to capture photo-generated electrons. In this way, long lifetime charge release and separation were effectively achieved for the persistent degradation of organic dyes in wastewater. The Cu(II) doped ZnGa 2 O 4 (ZGC) nanoparticles with a small size about 7.7 nm synthesized via a hydrothermal method exhibited a persistent photocatalytic activity with continuous production of reactive oxygen species for at least 96 h without in situ irradiation due to its unique electronic structure and carrier transport path, and enabled to degrade 82.2 % of rhodamine B in 1 h. Further investigation revealed that the doped Cu(II) ions occupied the octahedral sites of ZGC and highly increased the persistent production and availability of active species for the persistent degradation of organic dyes under pre-illuminated conditions. [ABSTRACT FROM AUTHOR]

Semiconductor photocatalysts are promising for Oxygen evolution reaction (OER) and also for reducing organic pollutants in wastewater. However, their limited activity under UV light and the fast recombination of electron-hole pairs, hinder their utilization in wastewater treatment. To address these challenges a novel photocatalyst based on carbon quantum dots (CQDs) supported Zinc–Cobalt Oxide (ZnCo 2 O 4) was developed, which demonstrated enhanced photocatalytic efficiency. Experimental findings indicated that 0.7 CQDs/ZnCo 2 O 4 exhibited superior photocatalytic performance compared to ZnCO 2 O 4 and CQDs/ZnCO 2 O 4 composites materials, achieving over 100 and 96 % decomposition of methylene blue (MB) and methylene orange (MO) dyes after 50 and 140 min under UV light. The enhanced performance of 0.7 CQDs/ZnCo 2 O 4 can be attributed to the charge transfer rate and synergistic effect between the coupled CQDs and ZnCo 2 O 4. Moreover, studies with radical scavengers reveal that •O 2 , •OH, and h+ play crucial roles in the breakdown of MB and MO dyes. Furthermore, 0.7 CQDs/ZnCo 2 O 4 displayed very low overpotential of 220 mV at 100 mA cm−2 for OER activity with a robust durability for 250 h at 500 mA cm−2. • CQDs-decorated ZnCo 2 O 4 Mss was developed by facile impregnation-thermal methode. • The enhanced catalytic activity of CQDs/ZnCo 2O 4 is due to the n-p junction, which generatesholes, ●OH, and ●O 2−. • Optimized 0.70 CQDs/ZnCo 2O 4 achieves nearly100% MB degradation in 50 min. • The photocatalytic degradation mechanism of CQDs/ZnCo 2O 4 MSs enhanced charge separation and improve overall photocatalytic activity. [ABSTRACT FROM AUTHOR]

In this study, a series of AgCl/ZnO-loaded nanofibrous membranes were prepared using coaxial electrospinning. Their physical and chemical characteristics were evaluated by SEM, TEM, XRD, XPS, IR, PL, and UV–visible spectrometer, and the photocatalytic experiments using methylene blue (MB) as a model pollutant. The formation of AgCl/ZnO heterojunction and the structure of core–shell nanofibers with porous shell layer were confirmed. AgCl/ZnO photocatalysts were also effectively loaded onto the surfaces of the porous core–shell nanofibers. The results of photocatalytic experiments revealed that the AgCl/ZnO (MAgCl:MZnO = 5:5)-loaded nanofibrous membrane achieved a degradation efficiency of 98% in just 70 min and maintained a photocatalytic efficiency exceeding 95% over the first five experimental cycles, which successfully addressed the issues of photocatalytic efficiency loss during the photodegradation of MB with AgCl/ZnO nanoparticles as photocatalyst. The photodegradation mechanism was also researched and proposed. [ABSTRACT FROM AUTHOR]

In this work, a composite ZnO/MoS2/AuNPs supported on carbon fiber cloth (CFC) was prepared by progressively growing ZnO nanorods array, MoS2 nanosheets and AuNPs on CFC for sensitive SERS detection and efficient photocatalytic degradation of organic dye pollutants. The ZnO/MoS2 heterojunctions showed a significant CM effect and further decorating AuNPs with EM effect improved the detection limit of crystal violet (CV) from 10–6 to 10–13 M. The composite can be used for qualitative SERS detection of CV or Nile blue in standard solution or real samples with high stability and good stability. The enhancement mechanisms of CFC/ZnO/MoS2 and CFC/ZnO/MoS2/AuNPs were discussed based on corresponding characterizations and calculations. The composite also showed efficient photocatalysis for dye degradation. The ZnO/MoS2 heterojunction played a key role in enhancing the charge separation rate and improving the photocatalytic performance. The materials achieved degradation efficiencies of 71.4% for CV (1.5 × 10–5 M) after 60 min irradiation under visible light. The active radical species were investigated and possible degradation approach were proposed. Such composite with both SERS enhancement and visible light photodegradation ability has great promise in environment monitoring and remediation. [ABSTRACT FROM AUTHOR]

Functionalized conjugated microporous polymers (CMPs) containing amino, imino, and hydrazine groups are synthesized by the Sonogashira–Hagihara coupling reaction. Notably, the porosities, thermal stabilities, and morphologies of the CMPs can be controlled by the introduction of functional groups. Here, the relationships between the functional groups and photocatalytic performance are discussed for the first time. The CMP nanowires exhibit excellent photocatalytic performance in organic pollutant degradation: the degradation rate obtained by CMP-I3 bearing naphthalene groups via an imine bond is > 99.99%, and ~ 99.71% of the degradation activity is maintained after five cycles. Notably, the excellent photocatalytic properties of CMP-I3 are imparted by the introduction of the naphthalene groups, which reduced the band gap. The improved charge-transfer activity accounts for the highest and lowest photocurrent intensity and resistance achieved, respectively. Furthermore, the photocatalytic mechanism of CMPs reveals that the superoxide anion is the main active substance in the photocatalytic degradation of dyes. [ABSTRACT FROM AUTHOR]

Photocatalysis using semiconductor metal oxide stands out as a highly effective and efficient method for eliminating organic pollutants from wastewater. This study aims to assess the photocatalytic capabilities of Mn doped ZnO nanocomposites in degrading methylene blue (MB) dye under ultra-violet light exposure. This study details the synthesis of ZnO photocatalysts through a straightforward one-step sol-gel method, incorporating varying levels of Mn-doping (0%, 2% & 4%). The structural and optical attributes were examined using techniques such as powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS) and UV-Vis diffuse reflectance spectra. X-ray diffraction analyses verified the presence of a hexagonal wurtzite crystal structure in all synthesized samples, exhibiting a high degree of crystallinity. In addition, an investigation into the impact of Mn impurities on the photocatalytic performance of ZnO catalysts was conducted in the context of methylene blue (MB) degradation. The experimental findings revealed that the Mn doped ZnO nanoparticles produced exhibited significantly superior photocatalytic performance compared to pure ZnO when used in breaking down methylene blue under UV-light exposure. This study proposes that these Mn doped ZnO could serve as a highly effective photocatalyst for treating water contaminated with certain chemically persistent synthetic organic dyes. The improved photocatalytic capabilities of ZnO nanostructures doped with Mn were ascribed to the synergistic impact of increased surface area in ZnO nanosphere and enhanced efficiency in charge separation resulting from optimized Mn doping. A potential explanation for the heightened photocatalytic performance of Mn-doped ZnO nanostructures is proposed tentatively. [ABSTRACT FROM AUTHOR]

Environmental contamination is a major global concern. Organic dyes pose a significant threat as water pollutants, leading to the depletion of natural resources. Molybdenum disulfide (MoS2), a type of two-dimensional transition metal dichalcogenide, has gained considerable attention due to its impressive properties, such as stability, surface area, and tunable interlayer spacing. It has emerged as a promising material for both photocatalytic degradation and adsorption of harmful organic dyes. This article provides an overview of recent advancements in MoS2-based nanomaterials for the removal of organic dyes from solutions through adsorption and photocatalytic processes. The review delves into the fundamental properties of MoS2, explores various synthesis methods, and various modifications of the material to enhance its dye removal efficiency, and addresses potential challenges associated with its application in this field. Furthermore, the article discusses the prospects for improving MoS2-based materials for enhanced adsorption and photocatalytic degradation of organic dyes. [ABSTRACT FROM AUTHOR]

Synthetic organic dyes are coloring agents used in various industries. Despite the fact that they offer exciting colors and long-lasting effects, certain organic dyes can have harmful impacts on human health and aquatic ecosystems. This study investigates the photocatalytic degradation of malachite green dye using Ni–TiO2 nanoparticles (NPs) and Ni–TiO2/PANI nanocomposites (NCs) in various reaction conditions. The surface and compositional change of synthesized photocatalysts were characterized by XRD, FTIR, AAS, and UV–vis spectrophotometer. Accordingly, the XRD results signify the crystal structure of photocatalysts found to be tetragonal anatase phase while the FT-IR spectra indicate the titanium has predominantly form a coordination compound upon reaction with nitrogen atom through weakening the bond strength between C═N, C═C, and C─N in the PANI. The UV–vis measurement shows that the energy bandgaps were decreased from 3.20 to 2.77 eV and 2.59 eV for Ni–TiO2 NPs and Ni–TiO2/PANI NCs, respectively. From AAS data, the authors confirmed that Ni metal has significantly existed in the aforementioned photocatalysts after the calcination process. The photocatalytic degradation of Ni–TiO2 NPs and Ni–TiO2/PANI NCs on the model dye has studied and their efficiency was 94.22% and 99.09%, respectively. The photocatalytic degradation follows pseudo-first order with 2.23 × 10−2 min−1 reaction rate at optimum conditions of pH 8.5, initial dye concentration of 0.2 g/L, catalyst load of 0.2 g/L, and irradiation time of 90 min. With this, the outstanding result recorded using Ni–TiO2/PANI NCs is ascribed to the smaller particle size as compared to Ni–TiO2 NPs, and it is found to be the promising photocatalyst for the removal of wastewater containing organic dyes. [ABSTRACT FROM AUTHOR]

Water contamination with synthetic dyes is an escalating problem worldwide. Herein, Co3O4-decorated reduced graphene oxide (Co3O4-rGO) is reported as an effective heterogeneous photocatalyst for the decomposition of organic dyes. The synthesis of Co3O4-rGO was confirmed via spectroscopic techniques including XRD, XPS, TEM, and FTIR. After characterization, the prepared Co3O4-rGO composite was tested as a photocatalyst for the degradation of methylene blue and methyl orange. The photocatalytic efficiency of Co3O4-rGO was >95% after 60 min, corresponding to 200 mg/L as the initial concentration of each dye. The photodegradation of MB and MO was confirmed by BOD and COD measurements. Experimental parameters like the re-usability of Co3O4-rGO, the effect of catalyst dosage, and the effect of dye concentration on photocatalytic activity were also investigated. The photocatalytic activity of Co3O4-rGO for the degradation of MB was 2.13 and 3.43 times higher than that of Co3O4 and rGO, respectively. Similarly, the photocatalytic activity of Co3O4-rGO for the degradation of MO was 2.36 and 3.56 times higher than that of Co3O4 and rGO, respectively. Hence, Co3O4-rGO was found to be an efficient and reusable photocatalyst for the decomposition of selected dyes in the aqueous medium. [ABSTRACT FROM AUTHOR]

Herein we synthesized biochar/iron oxide composite (C/α‐Fe2O3/γ‐Fe2O3) by two‐step calcination method. The prepared C/α‐Fe2O3/γ‐Fe2O3 had a highly pure and a concentration ratio of α‐Fe2O3 and γ‐Fe2O3 about 1 : 1. The optical properties of as‐synthesized C/α‐Fe2O3/γ‐Fe2O3 show a lower bandgap energy (1.90 eV) than that of pure C/α‐Fe2O3 (2.02 eV). The effects of different biochar composite catalysts on the removal of amino black were investigated. Upon illumination, the total removal rate of amino black dye by C/α‐Fe2O3/γ‐Fe2O3 catalyst reached 98 %, which was about 1.7 times that of C/α‐Fe2O3. In addition, the coercivity and the remanence intensity of C/α‐Fe2O3/γ‐Fe2O3 is respectively 1.81 times and 7.17 times that of C/α‐Fe2O3. The catalyst could be magnetically separated and reused for five times with a slight loss of its reactivity. The study of biochar composite provides a new direction for the removal of toxic organic dye in wastewater. [ABSTRACT FROM AUTHOR]

Metal–organic frameworks and coordination polymers (MOFs/CPs) have emerged as a rare category of multidimensional materials with applications in many fields, particularly as photocatalysts for aromatic dyes and for the luminescent sensing of volatile organic solvents (VOCs), anions, cations, etc. Herein, a luminescent zinc(II) coordination polymer (ZnCP) was prepared using 3,5-diamino triazole (DAT) and 1,3,5-benzenetricarboxylic acid (BTC) under solvothermal conditions and was fully characterized by FTIR spectroscopy, powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) analysis, and single X-ray crystallography. Moreover, the photocatalytic performance of the ZnCP in decomposing an aqueous solution of methyl green (MG) was examined. Photocatalysis results indicated a 99.61% efficiency in the presence of the ZnCP under visible light. Furthermore, an active species trapping experiment helped deduce a possible photocatalysis mechanism of MG degradation. Interestingly, the ZnCP also acted as a potential luminescent sensor for the detection of cations Fe3+ and Cu2 and anions Cr2O72− and MnO4−, with outstanding limit of detection (LOD) values of 2.44 nM for Fe3+, 3.50 nM for Cu2+, 3.14 nM for Cr2O72−, and 2.54 nM for MnO4−. Thus, the designed luminescent zinc(II) coordination polymer holds the potential to act as a photocatalyst as well as a luminescent sensor. [ABSTRACT FROM AUTHOR]

This study reports magnetic graphene oxide composite microspheres (MGO) were firstly synthesized via one step miniemulsion polymerization. α-FeOOH rods were then loaded onto MGO via a facile hydrothermal method to prepare α-FeOOH@MGO, which was served as the photocatalyst for the Fenton reaction. Subsequently, the properties of the resulting α-FeOOH@MGO were characterized by FT-IR, XRD, SEM, VSM and UV-vis DRS analysis methods. The influence of various parameters was investigated, such as dye type, dye concentration, H2O2 dosage, catalysts dosage and pH of MO solution during heterogeneous photo-Fenton processes. Under visible light irradiation, the degradation rate of MO, MB and CR could reach 99.96%, 98.47% and 99.97% in 40 min, respectively. Six cycle experiments confirmed that the α-FeOOH@MGO possessed a satisfied stability and recycling ability. In addition, the photocatalytic reaction mechanism was also revealed by the Mott-Schottky plot, band structure and trapping experiments of active species. [ABSTRACT FROM AUTHOR]

The development of a highly efficient catalyst for water splitting and photodegradation of organic dyes has become the focus of a considerable number of research groups. In the work described here CdZnS@MIL-53(Fe) and ZnS@MIL-53(Fe) were synthesized by the solvothermal method and subjected to thermal degradation at 520 °C in an oxidative environment to obtain CdZnS/Fe 2 O 3 and ZnS/Fe 2 O 3 , respectively. Electrocatalytic activity for the oxygen evolution reaction is analyzed via cyclic voltammetry and linear sweep voltammetry. It was found that CdZnS@MIL-53(Fe) shows maximum catalytic activity for the oxygen evolution reaction and delivers 10 mAcm−2 current density at 95 mV overpotential as compared to MIL-53(Fe)/NF (210 mV) and ZnS@MIL-53(Fe)/NF (112 mV). Similarly, the derivative of it, CdZnS/Fe 2 O 3 , shows maximum catalytic activity for the oxygen evolution reaction and delivers 10 mAcm−2 current density at 90 mV overpotential as compared to Fe 2 O 3 (204 mV) and ZnS/Fe 2 O 3 (115 mV). Based on these results, it is evident that these materials are highly efficient for OER activity compared with other materials in literature. Similarly, CdZnS/Fe 2 O 3 shows maximum photocatalytic activity for the photodegradation of Rhodamine B, up to 75% compared to CdZnS@MIL-53(Fe), which degrades up to 51% of the dye. The synthesized materials were characterized by powdered X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy. Based on these results the aim is to develop more MOF-based materials and their derivatives by simple heat treatment and to implement them in different catalytic applications. [Display omitted] • Designing of highly efficient catalysts by in-situ incorporation of CdZnS nanoparticles in (MIL-53(Fe). • The newly designed CdZnS@MIL-53(Fe) and its derivative CdZnS/Fe 2 O 3 showed efficient OER activity. • The CdZnS/Fe 2 O 3 is also effective forphotodegradation of Rhodamine B (up to 75% in just 80 min). • The better catalytic activity is due to formation of heterojunction between CdZnS and MIL-53(Fe) or its derivative. [ABSTRACT FROM AUTHOR]

Dye pollution resulting from the discharge of untreated wastewater has become a major environmental concern. In this study, we propose a green and cost-effective approach for the photocatalytic degradation of dye pollutants using a nanocomposite (NC) of manganese oxide (Mn3O4) modified with polyvinylpyrrolidone (PVP). The Mn3O4 nanoparticles (NPs) were synthesized through a green method using a biogenic extract of Pistacia lentiscus leaves. The resulting Mn3O4 NPs were then modified with PVP, a non-ionic polymer, to enhance their stability and catalytic performance. The synthesized Mn3O4/PVP NC was characterized using various analytical techniques, including Fourier transform infrared spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy. The findings showed that the Mn3O4 NPs and Mn3O4/PPV NC exhibit spherical morphology with an average size of 37 nm and 45 nm, respectively. The Mn3O4 NPs and Mn3O4/PVP NC exhibited optical bandgap energies of 1.8 eV and 1 eV, indicating the effective use of these NPs as photocatalysts. The nanocomposite exhibited exceptional catalytic performance in degrading bromophenol blue (BPB) and ortho-toluidine blue (O-TB), achieving degradation rates of 98% and 95% within 75 minutes. In comparison, Mn3O4 NPs showed lower efficiencies with approximately 14% degradation for BPB and 6% for O-TB. Optimal conditions for dye degradation and subsequent cycles were determined, and first-principles calculations revealed insight into the adsorption energy between the dyes and the Mn3O4/PVP surface. This study highlights the potential of Mn3O4/PVP nanocomposite as an effective and eco-friendly catalyst for dye pollutant degradation, offering a promising solution for wastewater treatment across industries. [ABSTRACT FROM AUTHOR]

Wastewater pollution caused by organic dyes is a growing concern due to its negative impact on human health and aquatic life. To tackle this issue, the use of advanced wastewater treatment with nano photocatalysts has emerged as a promising solution. However, experimental procedures for identifying the optimal conditions for dye degradation could be time-consuming and expensive. To overcome this, machine learning methods have been employed to predict the degradation of organic dyes in a more efficient manner by recognizing patterns in the process and addressing its feasibility. The objective of this study is to develop a machine learning model to predict the degradation of organic dyes and identify the main variables affecting the photocatalytic degradation capacity and removal of organic dyes from wastewater. Nine machine learning algorithms were tested including multiple linear regression, polynomial regression, decision trees, random forest, adaptive boosting, extreme gradient boosting, k-nearest neighbors, support vector machine, and artificial neural network. The study found that the XGBoosting algorithm outperformed the other models, making it ideal for predicting the photocatalytic degradation capacity of BiVO4. The results suggest that XGBoost is a suitable model for predicting the photocatalytic degradation of wastewater using BiVO4 with different dopants. [ABSTRACT FROM AUTHOR]

In this study, pure CdO nanoparticles, magnetic Fe3O4 nanoparticles, and Fe3O4-CdO nanocomposites were prepared via a solution combustion method using cetyltrimethylammonium bromide (CTAB) as a template. These prepared nanomaterial samples were characterized by X-ray diffraction (XRD), ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray photoelectron microscopy (XPS), transmittance electron microscopy (TEM), and scanning electron microscopy (SEM) analysis. XRD patterns confirmed the purity and the crystalline nature of the prepared samples. FTIR and Raman spectra observed the metal-oxygen (M-O) bond formation. UV-vis DRS studies were performed to investigate the optical properties and the bandgap energy determination. The surface morphology and the size of the pure CdO nanoparticles, magnetic Fe3O4, and nanocomposites of Fe3O4-CdO were determined via TEM and SEM analysis. Under optimum experimental conditions, the Fe3O4-CdO nanocomposites were applied for photocatalytic activity against Methylene blue dye. Under visible light irradiation, Fe3O4-CdO nanostructures showed an efficient photocatalytic degradation of 92% against Methylene blue organic dye and showed excellent stability for multiple cycles of reuse. [ABSTRACT FROM AUTHOR]

Historically, the photocatalytic efficacy of graphitic carbon nitride (g-C3N4) has been constrained by a rapid charge recombination rate and restricted sensitivity to visible light. To overcome these limitations and enhance the performance of g-C3N4, the strategic formation of heterojunctions with semiconductor materials is deemed the optimal approach. The present study employed a facile sonication-assisted pyrolysis method to synthesize a g-C3N4@ZrO2 nanocomposite photocatalyst. This hybrid material was characterized extensively using a comprehensive suite of analytical techniques, including XRD, SEM, EDX, FTIR, and UV-Vis DRS. A comparative analysis of photocatalytic applications under identical conditions was conducted for all synthesized materials, wherein they were subjected to UVc light irradiation. The photocatalytic degradation of various dye models, such as MB, EY, and a combination of dyes, was assessed using the prepared nanocomposites. The g-C3N4@ZrO2 photocatalysts showcased superior photocatalytic performance, with a particular variant, g-CNZ6, exhibiting remarkable activity. With a bandgap energy of 2.57 eV, g-CNZ6 achieved impressive degradation efficiencies of 96.5% for MB and 95.6% for EY within 40 min. Following previous studies, the superoxide radical anions (O2−. and h+) were largely accountable for the degradation of MB. Therefore, the observed efficacy of the g-C3N4@ZrO2 nanocomposite photocatalyst can be attributed to the increased generation of these reactive species. [ABSTRACT FROM AUTHOR]

Considering the strong sunlight-absorption property of WS2 and the good photocatalytic activity of BiOCl, a solar-light-active Z-scheme BiOCl@WS2 nanocomposite photocatalyst was synthesized by a precipitation approach. The developed photocatalyst was systematically characterized using available precision instruments. The photocatalytic property of the synthesized photocatalyst toward methyl orange (MO), rhodamine B (RhB), and crystal violet (CV) as anionic and cationic model organic dyes was investigated. In addition, the influence of operational factors, such as the catalyst dose, dye concentration, and pH, on the photocatalytic performance of the proposed photocatalyst was examined. The degree of mineralization of the fabricated Z-scheme BiOCl@WS2 nanocomposite photocatalyst during photodegradation of CV was also evaluated via total organic content (TOC) measurements. The findings showed that the developed Z-scheme BiOCl@WS2 nanocomposite exhibited excellent photocatalytic properties toward the organic pollutants MO, RhB, and CV. Moreover, the nanocomposite exhibited a better photocatalytic activity when compared with that of the solar-light-active photocatalysts reported in the open literature. It also displayed the potential to photocatalytically degrade 81% of MO, 100% of RhB, and 95% of CV within 120 min. Besides, 88% of CV could be mineralized by the fabricated photocatalyst in two hours. The outstanding photocatalytic performance of the Z-scheme BiOCl@WS2 nanocomposite could be attributed to the narrow band gap, large surface area, extended optical activity, and suppressed charge recombination rate. Thus, this work opens the door for developing effective, efficient, and stable solar-light-active photocatalysts for the photodegradation of organic dyes in wastewater. [ABSTRACT FROM AUTHOR]

Cobalt aluminate/carbon composite nanoparticles have been synthesised by utilising an auto-combustion method using glycine as an inexpensive fuel. The products were analysed by various techniques such as powder X-ray diffraction (XRD), Fourier transform infrared (FT-IR), thermal analysis (TG), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectrum (DRS), energy-dispersive X-ray spectroscopy (EDS). The results exhibited that the average crystallite size of the as-prepared CoAl2O4/C nanocomposite was ca. 26 nm. The photocatalytic activity of the as-prepared catalyst was evaluated through the degradation of methylene blue (MB) dye under different conditions, and the photocatalytic degradation mechanism was proposed. The results indicated that CoAl2O4/C nanocomposite has a high catalytic performance for the photocatalytic degradation of MB dye under UV illumination in the presence of H2O2. The degradation efficiency reached 98.5% in 90 min with a degradation rate constant of 0.046 min−1. [ABSTRACT FROM AUTHOR]

The construction of photocatalysts with a Z-scheme heterojunction is considered to be a superior strategy for improving photocatalytic activity. In this study, a photocatalyst (PI/TiC/TiO2) with a Z-scheme heterojunction was fabricated, in which polyimide (PI) and TiO2 were used as the organic/inorganic semiconductor photocatalyst and TiC acted as the transmission bridge for electrons between PI and TiO2. In the self-made air flow photocatalytic reactor, the photocatalytic degradation efficiencies of organic dyes by PI/TiC/TiO2 increased with the increase of both the concentration and diffusion rate of O2. The degradation efficiencies of RhB and MB by PI/TiC/TiO2 reached 93.87% and 90.96%, respectively, within 90 min of visible light exposure, showing its outstanding photocatalytic performance. The mechanism analysis indicated that the Z-scheme heterojunction in PI/TiC/TiO2 facilitated the separation and migration of photoexcited charges while retaining stronger redox capabilities for charge carriers. This study provides an insight into the construction of visible light responsive organic/inorganic photocatalysts with Z-scheme heterojunctions for organic pollution treatment applications. [ABSTRACT FROM AUTHOR]

Herein, new efficient photocatalysts composed of Cu doped NiS/ZnS quantum dots-composites were synthesized by coprecipitation technique for treatment of organic dyes. Treatment of dyeing-wastewater is an important issue to reduce the environmental pollution and providing a large quantity of pure water. The transmission electron microscope images of pure and Cu doped NiS/ZnS composites show quantum dots particles with size of 3–4 nm. The X-ray diffraction confirmed the formation of cubic ZnS and rhombohedral NiS. Optically, doping by 4 wt% Cu ions was reduced the band gap energy of ZnS from 3.4 to 2.98 eV, which improve the visible light absorption. 4 wt% Cu doped NiS/ZnS nanocomposite reveals a fast and remarkable photodegradation efficiency of 95%, 98% and 97% towards 20 ppm methyl green, methylene blue and Congo red during 60 min of sunlight irradiation. For three cycles, 4 wt% Cu doped NiS/ZnS nanocomposite exhibits significant photodegradation activities of 98%, 92% and 85%, respectively. The improvements of the photocatalytic activity of Cu doped NiS/ZnS nanocomposite can be attributed to some factors including visible-light absorption and charge carriers separation. The Cu doping improves the visible light response of ZnS through reducing the band gap which reinforce the number of the excited electron-hole pairs. Too, Cu ions act as trapping centers (Cu2+ + e → Cu+) which boost the separation of the excited electron-hole pairs and consequently improve the photodegradation activity. This study point out that the integration of p-n heterostructure and doping strategies are efficient for deign of photocatalysts for wastewater treatment. [ABSTRACT FROM AUTHOR]

The development of photocatalysts for organic degradation is a hot research topic. In this study, CdZnS was selected as the carrier, and ZIF-8 was combined with it to explore the photocatalytic performance of the composite. In addition, the compound material, CdZnS@ZIF-8, was used as a photocatalyst for the decomposition of methylene blue dye, and the performance of pure CdZnS and pure ZIF-8 was compared. The photocatalytic efficiency of CdZnS@ZIF-8 was significantly higher than that of the other two. In the experimental reaction, the amount of catalyst was 0.04 g, the pH value was 7, the initial concentration of methylene blue aqueous solution was 20 mg/L, and the degradation of methylene blue in 50 mL aqueous solution could reach 99.5% under visible light irradiation for 90 min, showing excellent photocatalytic efficiency in the visible light range. It demonstrated excellent photocatalytic function in the visible light region, and the electron transfer phenomenon at the interface occurred in the het-junction and the separation of the photo-generating electron–hole as an electron acceptor of ZIF-8 further promoted the photocatalytic effect. [ABSTRACT FROM AUTHOR]

There is no doubt that organic dyes currently play an indispensable role in our daily life; they are used in products such as furniture, textiles, and leather accessories. However, the main problems related to the widespread use of these dyes are their toxicity and non-biodegradable nature, which mainly are responsible for various environmental risks and threaten human life. Therefore, the elimination of these toxic materials from aqueous media is highly recommended to save freshwater resources, as well as our health and environment. Heterogeneous photocatalysis is a potential technique for dye degradation, in which a photocatalyst is used to absorb light (UV or visible) and produce electron–hole pairs that enable the reaction participants to undergo chemical changes. In the past, various metal oxides have been successfully applied as promising photocatalysts for the degradation of dyes and various organic pollutants due to their wide bandgap, optical, and electronic properties, in addition to their low cost, high abundance, and chemical stability in aqueous solutions. Various parameters play critical roles in the total performance of the photocatalyst during the photocatalytic degradation of dyes, including morphology, which is a critical factor in the overall degradation process. In our article, the recent progress on the morphological dependence of photocatalysts will be reviewed. [ABSTRACT FROM AUTHOR]

From the perspective of environmental protection, the highly efficient degradation of antibiotics and organic dyes in wastewater needs to be tackled as soon as possible. In this study, an ecofriendly and green cube-shaped cobalt-doped zinc oxide nanoparticles (Co–ZnO NPs) photocatalyst using Pterocladia Capillacea (P. Capillacea) water extract loaded with 5, 10, and 15% cobalt ions were formed via co-precipitation process to degrade antibiotics. The prepared Co–ZnO NPs were tested as a photocatalyst for the photodegradation of ciprofloxacin (CIPF) in the presence of a visible LED-light source. Co–ZnO NPs have been obtained through the co-precipitation method in the presence of P. Capillacea extract as a green capping agent and reducing agent, for the first time. Several characterization techniques including FTIR, XRD, BET, XPS, TEM, EDX, SEM, TGA and DRS UV–Vis spectroscopy were applied to study the prepared Co–ZnO NPs. XRD results suggested that the average size of these NPs ranged between 42.82 and 46.02 nm with a hexagonal wurtzite structure. Tauc plot shows that the optical energy bandgap of ZnO NPs (3.19 eV) gradually decreases to 2.92 eV by Co doping. Examinations showed that 5% Co–ZnO NPs was the highest efficient catalyst for the CIPF photodegradation when compared with ZnO NPs and other 10 and 15% Co–ZnO NPs. A 10 mg/L solution of CIPF was photo-degraded (100%) within the first 15 min irradiation. The kinetics showed that the first-order model is suitable for displaying the rate of reaction and amount of CIPF elimination with R2 = 0.952. Moreover, central composite design optimization of the 5% Co-doped ZnO NPs was also investigated. [ABSTRACT FROM AUTHOR]

Dye-contaminated water from industry is hazardous to human and aquatic lives. Membrane technology is considered a viable approach to resolve the issue. Herein, copper oxide nanoparticles (CuO NPs) embedded in porous chitosan membranes have been prepared using a solution-casting approach with sodium tripolyphosphate as a crosslinker and polyethylene glycol as a porogen. The prepared membranes have been characterized by physicochemical, mechanical and photocatalytic properties. FTIR results indicate some hydrogen bonding across CuO NPs and the chitosan matrix. XRD and TGA analyses reveal that the membranes are thermally stable and somehow crystalline. SEM examination indicates that the membrane surfaces express porous/roughened texture. The contact angle measurement indicates that the pure chitosan and CuO NPs-embedded membranes are hydrophobic, whereas PEG-leached porous chitosan membranes express hydrophilicity. CuO NPs reinforcement has significantly improved the tensile strength, whereas the elongation at break decreased. The CuO NPs incorporated in chitosan membranes exhibit exceptional photocatalytic activities against methyl orange and methylene blue dyes for their effective removal from aqueous media. [ABSTRACT FROM AUTHOR]

The problem of industrial dyes depollution has pushed the scientific research community to identify novel photocatalysts with high performance. Herein, new photocatalysts composed of BaTiO3, BaTi0.96Cu0.04O3, BaTi0.96Cu0.02V0.02O3 and BaTi0.96Cu0.02Nb0.02O3 powders were prepared by solid-state reaction. The structural analysis of the samples confirmed the formation of the BaTiO3 structure. The splitting of (002) and (200) planes verified the formation of the tetragonal phase. The XRD peaks shifted, and the unit cell volume expansion verified the substitution of the Ti4+ site by Cu2+, V4+ and Nb5+ ions. The morphological measurements showed that the addition of (Cu, V) and (Cu, Nb) ions changes the particles' morphology of BaTiO3, reducing its grains size. After the incorporation of (Cu, V) and (Cu, Nb) ions, the band gap of BaTiO3 was reduced from 3.2 to 2.84 and 2.72 eV, respectively. The modification of BaTiO3 by (Cu, Nb) ions induced superior photocatalytic properties for methyl green and methyl orange with degradation efficiencies of 97% and 94% during 60 and 90 min under sunlight irradiation, respectively. The total organic carbon results indicated that the BaTi0.96Cu0.02Nb0.02O3 catalyst has a high mineralization efficiency. In addition, it possesses a high stability during three cycles. The high photodegradation efficiency of Bi0.96La0.02Gd0.02FeO3 was related to the wide-ranging visible light absorption. [ABSTRACT FROM AUTHOR]

Bismuth MOF catalysts were successfully fabricated using the solvothermal method, which involved the use of a mixed solvent composed of DMF and ethanol in varying volume ratios. Subsequently, the catalysts underwent comprehensive characterization using diverse techniques i.e., FTIR, XRD, N2 adsorption-desorption, UV–vis diffuse, and SEM-EDX. The photocatalytic degradation of RhB was investigated using six different bismuth MOF (BiEt) catalysts. Later, parametric analysis study was performed to test the BiEt catalysts under different values of pH, Rhodamine B (RhB) dye concentrations, and different scavengers. The results showed that BiEt1 had total surface area of 16.78 m2/g and pore volume of 0.025 cm3/g with a pore size of 1.5331 nm. The photocatalytic performance of the catalysts was assessed by quantifying the removal capacity and analyzing theUV–vis absorption spectra during the degradation of RhB. The results show that BiEt 1 had the highest photodegradation efficiency toward the RhB and that it required the shortest time of 60 min to achieve 100% removal. The UV–vis absorption spectra of BiEt catalysts during the degradation of RhB showed that the characteristic absorption wavelength of RhB was observed at 576 nm. These findings suggest that the prepared BiEt was an exceptional photocatalyst for the degradation of RhB. It has great potential for environmental remediation applications. [Display omitted] • Bismuth MOF catalysts revealed exceptional photocatalytic performance, achieving 100% removal of RhB dye within 60 min. • BiEt1 exhibited highest removal capacity of RhB and possessed a total surface area of 16.78 m2/g. • DMF/ethanol solvent mixture improved the photocatalytic efficiency. • The pH significantly influenced the photocatalytic activity of Bi-BTC catalysts. • Scavengers hindered efficiency of RhB degradation. [ABSTRACT FROM AUTHOR]

Coordination polymers (CPs) are a diverse class of multi-dimensional compounds that show promise as photocatalysts for degrading dyes in polluted water. Herein, a new 1D Cd(II)-based coordination polymer with the formula [Cd(bpyp)(nba)2] (1) (bpyp = 2,5-bis(pyrid-4-yl)pyridine and Hnba = 4-nitrobenzoic acid) is synthesized and characterized. In 1, the two carboxyl groups of two different nba− ligands show μ2-η1:η1 and μ1-η1:η1 coordination modes to connect the CdII centers and sit on either side of the chain along the b direction. The produced CP 1 was utilized as the photocatalyst in the process of the photodegradation of methyl blue (MB), methyl orange (MO), rhodamine B (RhB), and methyl violet (MV) dyes when exposed to UV light. The photocatalytic degradation activities of CP 1 were analyzed, and the results suggest that it exhibits an extraordinary efficiency in the degradation of MB, MV, MO, and RhB. RhB has a 95.52% efficiency of degradation, whereas MV has a 58.92% efficiency, MO has 35.44%, and MB has 29.24%. The photodecomposition of dyes is catalyzed mostly by •O2− and •OH−, as shown by research involving the trapping of radicals. [ABSTRACT FROM AUTHOR]

Here, the zinc sulfide–copper sulfide (ZnS–CuS) nanocomposites have been synthesized using immersing thin layers of ZnS in 0.5 (M) Copper (II) chloride solution at low temperature by a simple and cost-effective chemical bath deposition (CBD) method. The immersion time of ZnS thin films in copper (II) chloride solution was investigated based on the structural, morphological, optical and optical catalytic activity of the prepared layers. The results of X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed the formation of CuS: ZnS nanolayers consists of nanocrystals with an approximate diameter of less than 10 nm during the immersion time of 1 min. The particles forming the layers are dense and have good adhesion to the substrate. The energy gap of the layers decreases with increasing copper, which can lead to phase formation. Their significant photocatalytic activities in the photodegradation of Rhodamine B (RhB) dye in aqueous media have been considered, because ZnS:CuS nanocomposite thin films showed light catalytic activity in the RhB degradation in presence of visible radiation, so that the percentage of dye degradation is decreased by increasing the amount of copper and the duration of exposure to visible light due to slowing down the recombination rate of electron–hole pairs. While investigating the optical catalytic activity of the layers, there was no need to homogenize and centrifuge the solution to separate the nanoparticles from it. The main aim of this study is consideration of the effects of CuS amount on the photocatalytic activity of ZnS–CuS nanocomposite under the CBD method of synthesis condition. [ABSTRACT FROM AUTHOR]

A critical challenge that impedes the application of photocatalytic techniques for organic dye degradation from polluted industrial effluents is that traditional powdery photocatalysts exposed limited photo-absorption sites and exhibited inefficient recyclability. To overcome these challenges, this study designed a one-step process to synthesize a monolithic copper selenide (CuSe)-based photocatalyst. The characterization results fully supported that the maintenance of the copper foam during the selenization process was the prerequisite for the monolithic photocatalyst to keep its structural integrity in photocatalytic reactions. The surface of the monolithic photocatalyst fully covered by active CuSe is crucial for the exposure of photocatalytically active sites and the efficient degradation of methylene blue (MB). It was found that the CuSe-based monolithic photocatalyst exhibited excellent MB degradation performances under harsh pH conditions and high MB concentrations. From these perspectives, it is reasonable to conclude that the CuSe-based monolithic photocatalyst as prepared is a promising alternative to traditional powdery photocatalysts for organic dye degradation and industrial effluent cleaning. [ABSTRACT FROM AUTHOR]

The discovery of nanoparticles with varied size, shape and composition has stretched the limits of nanotechnology in almost any field. One of the important areas of interest is the use of nanoparticles in heterogeneous catalysis, whereby it offers an advantage by providing large surface area. Our present work focussed on the development of a graphene-based nanocatalyst (Pd@NGO) as an efficient tool to study various organic transformations. The prepared mesoporous catalyst was characterised by X-ray diffraction (PXRD), thermogravimetric analysis (TGA), field emission-scanning electron microscopy (FE-SEM), Brunauer–Emmett–Teller (BET), high resolution transmission electron microscopy (HR-TEM) and Fourier transformer infrared spectroscopy (FT-IR), inductively coupled plasma atomic emission spectroscopy (ICP-AES) and X-ray photoelectron spectroscopy (XPS). TEM images showed the light grey sheets of N-GO on which Pd(0) nanoparticles were immobilised. BET analysis confirmed the mesoporous texture of the designed nanocatalyst by giving the surface area of 12.933 m2 g−1 with a pore volume and average pore diameter of 0.020685 cm3 g−1 and 6.39 nm, respectively. Also, FTIR data affirmed the presence of a characteristic C–N peak near 1271 cm−1 showing successful doping of nitrogen over graphene oxide. The XPS data revealed the presence of various elements like carbon (C 1s), nitrogen (N 1s), oxygen (O 1s) and Pd 3d. The prepared nanocatalyst was explored in Suzuki coupling reaction under green conditions, reduction of nitro compounds and the photodegradation of methyl orange with a degradation efficiency of 98.77%. The photodegradation of dyes is viewed as a potential method for the treatment of industrial wastewater due to its low cost, ecologically acceptable procedure, and lack of secondary contamination. Through direct photodegradation or a degradation process involving sensitization, this approach exhibits the light-enhanced creation of charge carriers and reactive radicals that non-selectively break down a variety of organic dyes into water, CO2, and other organic molecules. Moreover, Pd@NGO shows excellent stability and can be used multiple times, and hence possesses efficient reusability. [ABSTRACT FROM AUTHOR]

Semiconducting nanomaterials based heterogeneous photocatalysis represent a low-cost, versatile technique for environmental remediation, including pollution mitigation, energy management and other environmental aspects. Herein, we demonstrate the syntheses of various heterogeneous photocatalysts based on highly reduced graphene oxide (HRG) and vanadium oxide (VOx)-based nanocomposites (HRG–VOx). Different shapes (rod, sheet and urchin forms) of VOx nanoparticles were successfully fabricated on the surface of HRG under solvo-/hydrothermal conditions by varying the amount of water and ethanol. The high concentration of water in the mixture resulted in the formation of rod-shaped VOx nanoparticles, whereas increasing the amount of ethanol led to the production of VOx sheets. The solvothermal condition using pure ethanol as solvent produced VOx nano-urchins on the surface of HRG. The as-prepared hybrid materials were characterized using various spectroscopic and microscopic techniques, including X-ray diffraction, UV–vis, FTIR, SEM and TEM analyses. The photocatalytic activities of different HRG–VOx nanocomposites were investigated for the photodegradation of methylene blue (MB) and methyl orange (MO). The experimental data revealed that all HRG–VOx composite-based photocatalysts demonstrated excellent performance toward the photocatalytic degradation of the organic dyes. Among all photocatalysts studied, the HRG–VOx nanocomposite consisting of urchin-shaped VOx nanoparticles (HRG–VOx-U) demonstrated superior photocatalytic properties towards the degradation of dyes. [ABSTRACT FROM AUTHOR]

Unique nonlinear optical properties for converting low-energy incident light into high-energy radiation enable up-conversion materials to be employed in photocatalytic systems. An efficient near-infrared (NIR) response photocatalyst was successfully fabricated through a facile two-step method to load BiOBr on the Nd3+, Er3+@NaYF4 (NE@NYF) up-conversion material. The NE@NYF can transform NIR into visible and UV light and promote charge–energy transfer in the semiconductor. Consequently, the as-obtained photocatalysts exhibit excellent photodegradation performance for rhodamine B dye (RhB) and tetracycline (TC) organic pollutants. About 98.9% of the RhB was decomposed within 60 min with the 20% NE@NYF-B sample, outperforming the pristine BiOBr (61.9%). In addition, the 20% NE@NYF-B composite could decompose approximately 72.7% of the organic carbon during a 10 h reaction, which was almost two-fold more than that of BiOBr. Meanwhile, a possible charge transfer mechanism is proposed based on the recombination of electron–hole pairs and reactive oxygen species. This work provides a rational hybrid structure photocatalyst for improving photocatalytic performance in the broadband spectrum and provides a new strategy for NIR light utilization. [ABSTRACT FROM AUTHOR]

Nowadays, for environmental remediation, photocatalytic process involving graphene-based semiconductors is considered a very promising oxidation process for water treatment. In the present study, nanocomposite (Cu/Ni/rGO) has been synthesized by Dypsis lutescens leaf extract. Characterization of the sample was carried out by UV-visible spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis, Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Different parameters like contact time, nanocatalyst amount, dye concentration, effect of temperature. and pH factor were optimized to examine the maximum removal efficiency for dyes rhodamine B and alizarine R with and without visible light source. In both cases, i.e., with or without light, maximum removal was observed at 20 mg of nanocatalyst for 5 ppm concentration of both dyes at 45 °C temperature and pH 10 for rhodamine B and pH 4 for alizarine R, respectively with a 20 min contact time. Maximum removal of dyes 93% rhodamine B and 91% alizarine R were observed under a tungsten lamp as compared to without a tungsten lamp, i.e., 78% of RhB and 75% of AR from mixture solution of these dyes. To assess the rate of reaction, spontaneity, and nature of reaction thermodynamics, kinetics and adsorption isotherms were studied. Thermodynamic values indicated that both dyes depicted endothermic and spontaneous degradation processes. Isotherm data fitted best to a Freundlich isotherm, while results of kinetic studies of both dyes followed the pseudo 2nd order kinetic equation. In the end, scavenging radical studies concluded that hydroxyl radicals were the main active specie involved in the photocatalytic degradation process, and regeneration experiments resulted that Cu/Ni/rGO nanocomposites were re-utilized for about four times. [ABSTRACT FROM AUTHOR]

Organic dye‐contained wastewater is a major threat to the global environment and public health. In this study, natural wood and MoS2 are combined to create effective photocatalysts for removing organic pollutants from water under light irradiation. The results show that the photocatalytic degradation activity of wood/MoS2 composites are obviously superior to that of natural wood under solar light as well as possess outstanding stability after three reaction cycles. The improvement in photocatalytic performance for photodegradation is primarily due to an increase in specific surface area and the introduction of catalytic active sites from the edge S, which favors adsorption of organic pollutants and accelerates the degradation process. The synergistic effect of adsorption and photocatalysis also ensures that the composited catalyst is highly universal in its application to organic dye degradation, including RhB (Rhodamine B), MB (Methylene Blue), and MO (Methyl Orange); the kinetic constant for the photocatalytic degradation of RhB, MO, and MB are 0.040, 0.035, and 0.032 min−1, respectively and the degradation performance can be well maintained after three cycle tests. Our study has proved that the wood/MoS2 composite is a novel, low‐cost photocatalyst that plays an important role in environmental protection. [ABSTRACT FROM AUTHOR]

This paper proposes a simple and environmentally friendly method for the green synthesis of SnO2–ZnO/bentonite nanocomposite in the presence of Acroptilon repens flower extract as a reducing and stabilizing agent. The synthesized nanocomposite was characterized using various techniques to investigate their structural properties and morphology. The photocatalytic degradation of the organic dye, eriochrome black-T (EBT) under solar irradiation and in the presence of synthesized nanocomposite was investigated. The results indicated that the nanoparticles were well immobilized onto bentonite as a support with minimum agglomeration. Moreover, the results of photocatalytic reactions showed that SnO2–ZnO/bentonite nanocomposite could remove the dyes in just 2.5 h and the degradation efficiencies approached 100% indicating the excellent performance of the catalyst. The kinetic study revealed that degradation of EBT in presence of the SnO2–ZnO/bentonite nanocomposite obeys first-order kinetics with the rate constant of 1.75 × 10–2 min−1. Furthermore, the biosynthesized nanocomposite exhibited a stable performance and high tolerance to the reaction conditions and was reused in three cycles with negligible loss of activity. [ABSTRACT FROM AUTHOR]

Remediation of organic dyes from wastewater in textile industries is a big challenge to decreasing water pollution. This study was aimed at the preparation of ZnO nanoparticles (NPs) and their application as a photocatalyst for the degradation of methylene blue (MB), sunfix red (SR) and real textile wastewater (RTW) under both UV and visible irradiations. The ZnO NPs were synthesized with a green Thymus vulgaris leaf extract-supported approach following the calcination process. 50 mg L−1 MB and 50 mg L−1 SR dyes were completely photodegrade under UV irradiation after only 20 and 45 minutes, respectively, in the presence of 1.0 mg/mL ZnO NPs. When they are exposed to visible light, the degradation efficiency reached 91 and 75% within 60 and 120 min, respectively. Photocatalytic measurements of RTW depict that 95% (within 60 min under UV illumination) and 79% (within 90 min under visible illumination) were degraded, respectively. The enhanced photodegradation can be attributed to the narrowing of the bandgap of the ZnO NPs, high crystallinity and nearly hexagonal morphology with an average size of 20–30 nm. The present results show that ZnO NPs could potentially be applied for high-efficiency degradation of organic dyes and RTW under both UV and visible light irradiation. We report for the first time, Thymus vulgaris leaf extract–assisted synthesis of ZnO nanoparticles (NPs) has been applied as a photocatalytic dye and RTW degradation. Second, our synthesis approach is more facile and simple than the previous method where complex hydrothermal or solvothermal methods have been applied, which leads to a complex preparation procedure. We systematically prepared ZnO materials in taking account into the variable Thymus vulgaris/ZnO precursor ratio, different calcination temperature and time and in detail, their photocatalytic activity has been fully investigated. [ABSTRACT FROM AUTHOR]

Metal ion doping is the most widely used means to improve the photocatalytic performance of semiconductor materials, which can adjust the band gap, broaden the range of optical response and construct impurity levels. The high efficiency modified NaTaO3 perovskite catalyst with good structural and catalytic properties was synthesized by a simple hydrothermal reaction method. A variety of analysis and testing techniques, such as XRD, SEM, DRS, XPS and EPR, were used to analyze the structure properties of the prepared materials. The results show that the influence mechanism of different metal introduction on the structure and properties of the NaTaO3 perovskite was different. Metal doping promoted the bond angle of Ta-O-Ta close to 180°, which restrains the recombination of the photogenerated electron-holes in the crystal. As Ce is introduced into the perovskite, the CeO2 forms and agglomerates around the perovskite, which improves the electron transport performance. With the narrower band gap, the Ce-modified perovskite shows that the degradation rate of ARS is 84% after 180 min of photoreaction. The species of h+, O2− and ·OH play different roles in improving the performance of the photocatalytic degradation process. [ABSTRACT FROM AUTHOR]

Efficient and excellent nanoparticles are required for the degradation of organic dyes in photocatalysis. In this study, silver–manganese oxide nanoparticles (Ag-Mn-NPs) were synthesized through a wet chemical precipitation method and characterized as an advanced catalyst that has enhanced photocatalytic activity under sunlight irradiation. The nanoparticles were characterized using scanning electron microscopy (SEM), XRD, UV–vis light spectra, and energy-dispersive X-ray (EDX) spectroscopy, revealing their spherical and agglomerated form. The EDX spectra confirmed the composition of the nanoparticles, indicating their presence in oxide form. These bimetallic oxide nanoparticles were employed as photocatalysts for the degradation of malachite green (MG) dye under sunlight irradiation in an aqueous medium. The study investigated the effects of various parameters, such as irradiation time, catalyst dosage, recovered catalyst dosage, dye concentration, and pH, on the dye's photodegradation. The results showed that Ag-Mn oxide nanoparticles exhibited high photocatalytic activity, degrading 92% of the dye in 100 min. A longer irradiation time led to increased dye degradation. Moreover, a higher catalyst dosage resulted in a higher dye degradation percentage, with 91% degradation achieved using 0.0017 g of the photocatalyst in 60 min. Increasing the pH of the medium also enhanced the dye degradation, with 99% degradation achieved at pH 10 in 60 min. However, the photodegradation rate decreased with increasing dye concentration. The Ag-Mn oxide nanoparticles demonstrate excellent potential as a reliable visible-light-responsive photocatalyst for the efficient degradation of organic pollutants in wastewater treatment. [ABSTRACT FROM AUTHOR]

[Display omitted] • Controlled growth of CeO 2 nanoparticles (NPs) on reduced graphene oxide (rGO) layers was designed and synthesized via heterogeneous reactions of Ce3+ ions and oxygen-containing functional groups. • The growth process of CeO 2 NPs was studied using the in-situ TEM analysis. • We identified the key formation mechanisms of in-situ grown CeO 2 NPs on rGO layers and reported good adsorption-photocatalytic activities of the as-synthesized CeO 2 @rGO. • Degradation rate of rhodamine B using the composite reached 94.7% within 120 min, and after five cycles, the degradation rate was still maintained at 87.2%. Nanostructured composites of metal oxides and graphene often exhibit synergistic physicochemical properties, which can be explored for applications in photocatalysis and water treatment. However, there are key issues about effective structure controls such as distributions and sizes of nanoparticles inside these composite materials. Herein, we report a green approach using hydrothermal calcination processes to in-situ grow CeO 2 nanoparticles (with their ultrafine crystalline sizes, homogeneous dispersion and controlled oxygen-vacancy) directly onto surfaces of reduced graphene oxides (rGOs). The growth process of CeO 2 NPs was characterized by in-situ TEM analysis. During the calcination process, oxygen-containing functional groups such as –OH and C O on the rGOs were transformed into H 2 O and CO 2 , which acted as oxidizing agents to react with cerium ions and produce CeO 2 nanoparticles directly onto surfaces of rGOs. Integration of ultrafine crystalline oxygen deficient CeO 2 and electrically conducting rGOs facilitated fast adsorption of reactant molecules and provided numerous active sites, which effectively achieved superior photocatalytic performance and enhanced adsorption capability for colored organic dyes of rhodamine B and methyl orange. Degradation rate of rhodamine B using the composite reached 94.7% within 120 min, and after five cycles, the degradation rate was still maintained at 87.2%, showing good stability and reusability. [ABSTRACT FROM AUTHOR]

In this study, the chemical pechini sol-gel method was used for the simple fabrication of Fe0.5Mn0.5Co2O4/Fe2O3 as a new nanocomposite at 400, 600, 800, and 1000 oC. The fabricated products at 400, 600, 800, and 1000 oC were encoded as E400, E600, E800, and E1000, respectively. The fabricated nanocomposites were identified using several devices such as XRD, N2 adsorption/desorption analyzer, FT-IR, EDS, UV–Vis diffuse reflectance spectrophotometer, and field emission scanning electron microscopy. The average crystallite size of the E400, E600, E800, and E1000 products is 80.31, 123.25, 130.75, and 141.36 nm, respectively. The FE-SEM showed that the E400 sample consists of rods, spheres, and irregular forms with an average diameter of 337.50 nm. Also, the E600 and E800 products consist of spheres and irregular shapes with an average diameter of 446.96 and 854.52 nm, respectively. Besides, the E1000 product comprises of cubic, sphere, and irregular shapes with a mean diameter of 1019.88 nm. The synthesized nanocomposites were used for the efficient photocatalytic degradation of safranin dye. In the presence of H2O2, 0.1 g of the synthesized nanocomposites completely decompose 50 mL of about 25 mg/L of safranin dye at pH equals 8 in 25 min. [ABSTRACT FROM AUTHOR]

Titanium dioxide (TiO2) is an ideal photocatalyst candidate due to its high activity, low toxicity and cost, and high chemical stability. However, its practical application in photocatalysis is seriously hindered by the wide band gap energy of TiO2 and the prone recombination of electron-hole pairs. In this study, C, N doped TiO2 were supported on spent coffee grounds-derived carbon (ACG) via in situ formation, which was denoted as C, N–TiO2@ACG. The obtained C, N–TiO2@ACG exhibits increased light absorption efficiency with the band gap energy decreasing from 3.31 eV of TiO2 to 2.34 eV, a higher specific surface area of 145.8 m2/g, and reduced recombination rates attributed to the synergistic effect of a spent coffee grounds-derived carbon substrate and C, N doping. Consequently, the optimal 1:1 C, N–TiO2@ACG delivers considerable photocatalytic activity with degradation efficiencies for methylene blue (MB) reaching 96.9% within 45 min, as well as a high reaction rate of 0.06348 min−1, approximately 4.66 times that of TiO2 (0.01361 min−1). Furthermore, it also demonstrated greatly enhanced photocatalytic efficiency towards methyl orange (MO) in the presence of MB compared with a single MO solution. This work provides a feasible and universal strategy of synchronous introducing nonmetal doping and biomass-derived carbon substrates to promote the photocatalytic performance of TiO2 for the degradation of organic dyes. [ABSTRACT FROM AUTHOR]

MIL-101(Cr)@TiO2 core-shell composite material was synthesized via the hydrothermal method, where MIL-101(Cr) served as the core and TiO2 acted as the shell. SEM results revealed that the metal-organic framework core effectively prevented the aggregation of TiO2 nanoparticles and facilitated their dispersion. Characterization techniques such as XRD, XPS, and TGA were utilized to confirm the successful loading of TiO2 onto MIL-101(Cr) and its excellent thermal stability. MIL-101(Cr)@TiO2 was employed in photocatalytic degradation of dye pollutants and vehicle exhaust, and the potential degradation mechanisms were investigated in detail. The results showed that MIL-101(Cr)@TiO2 exhibited excellent photocatalytic degradation performance towards dye pollutants, with degradation efficiencies of 91.7% and 67.8% achieved for MB and RhB, respectively, under visible light irradiation for 90 min. Furthermore, the photocatalytic degradation of automobile exhaust revealed that the MIL-101(Cr)@TiO2 composite material also exhibited degradation effects on NOx, CO, and HC. The degradation efficiency for NO reached 24.2%, indicating its broader applicability. [ABSTRACT FROM AUTHOR]

Organic dyes have been widely used in industry but mistreatment of their use and disposal can have negative consequences on human health. A technique based on solid photocatalysts is feasible for remediating organic dyes without additional harmful byproducts or additives. Recently, metal-organic frameworks formed by the metal ions and organic linkers have been studied in the areas of photocatalysis and biomedicine. In this study, the assembly reaction of 2-CNB ligand with La(CH3COO)3 generated a metal-organic framework, [La(2-CNB)(CH3COO)2(H2O)]n (1, 2-CNB = 2-cyanobenzoic acid). Its high degradation efficiency makes 1 an effective photocatalyst for Rhodamine B (RhB) photodegradation under irradiation by UV light, with a degradation efficiency of 97.78% within 90 min. [ABSTRACT FROM AUTHOR]