Search

In this technical note, we describe a facile method for one-step fabrication of paper-based microfluidic devices, by simply using commercially available permanent markers and metal templates with specific patterns. The fabrication process involves only a single step of plotting pattern in paper; it can be typically finished within 1 min. The ink marks formed in the patterned paper will act as the hydrophobic barriers to define the hydrophilic flow paths or separate test zones. Various paper devices can be created by using different templates with corresponding patterns. Transparent adhesive tape-sandwiched devices could protect their assay surfaces from potential contamination. In the proof-of-concept experiments, circular paper test zones (~3 mm diameter) were fabricated for colorimetric and quantification detection of prostate-specific antigen (PSA) as a model target, based on dot-immunogold staining assays coupled with gold enhancement amplification. Several serum specimens were additionally evaluated with this new approach and the results were compared with the commercial chemiluminescence immunoassay, validating its feasibility of practical applications. Such a one-step plotting method for paper patterning does not require any specialized equipments and skills, is quite inexpensive and rapid, and thus holds great potential to find wide applications especially in remote regions and resource-limited environments such as small laboratories and private clinics. [ABSTRACT FROM AUTHOR]

This technical note describes a detailed study on wax printing, a simple and inexpensive method for fabricating microfluidic devices in paper using a commercially available printer and hot plate. The printer prints patterns of solid wax on the surface of the paper, and the hot plate melts the wax so that it penetrates the full thickness of the paper. This process creates complete hydrophobic barriers in paper that define hydrophilic channels, fluid reservoirs, and reaction zones. The design of each device was based on a simple equation that accounts for the spreading of molten wax in paper. [ABSTRACT FROM AUTHOR]

This paper presents an inkjet printing method for the fabrication of entire microfluidic multianalyte chemical sensing devices made from paper suitable for quantitative analysis, requiring only a single printing apparatus. An inkjet printing device is used for the fabrication of three-dimensional hydrophilic microfluidic patterns (550-μm-wide flow channels) and sensing areas (1.5 mm × 1.5 mm squares) on filter paper, by inkjet etching, and thereby locally dissolving a hydrophobic poly(styrene) layer obtained by soaking of the filter paper in a 1 wt % solution of poly(styrene) in toluene. In a second step, the same inkjet printing device is used to print "chemical sensing inks", comprising the necessary reagents for colorimetric analytical assays, into well-defined areas of the patterned microfluidic paper devices. The arrangement of the patterns, printed inks, and sensing areas was optimized to obtain homogeneous color responses. The results are "all-inkjet-printed" chemical sensing devices for the simultaneous determination of pH, total protein, and glucose in clinically relevant concentration ranges for urine analysis (0.46-46 μM for human serum albumin, 2.8-28.0 mM for glucose, and pH 5-9). Quantitative data are obtained by digital color analysis in the L*a*b* color space by means of a color scanner and a simple computer program. [ABSTRACT FROM AUTHOR]